AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

129-1095 CYLINDER BLOCK GP S/N 98Z15000-UP PART OF 2W-9746 CYLINDER BLOCK GP 120H MOTOR GRADER


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

MOTOR GRADER 120H MOTOR GRADER 2AN
 120H Motor Grader 2AN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2544 120H 2AN   (1996)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
115-4179 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
115-4179 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
 

#SEBP25440020
 

129-1095: CYLINDER BLOCK GP

129-1095 CYLINDER BLOCK GP
S/N 98Z15000-UP
PART OF 2W-9746 CYLINDER BLOCK GP
i00125093 SEBP2544
1291095 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  100-6289 [1] CYLINDER BLOCK AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25440021
 

149-5403: CYLINDER BLOCK GP

149-5403 CYLINDER BLOCK GP
S/N 98Z28461-UP
PART OF 2W-9746 CYLINDER BLOCK GP
i01102112 SEBP2544
1495403 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
  7E-2968 [7] CAP-CRANKSHAFT BEARING  
  9X-8916 M [14] BOLT (M16X2X140-MM)  
  149-5401 [1] CYLINDER BLOCK  
2. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
3. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
4. 2M-6471 [2] PLUG-CUP  
5. 9S-8008 [1] PLUG (1-1/16-12-THD)  
6. 3D-2824 [1] SEAL-O-RING  
7. 3H-5552 [1] PLUG-CUP  
8. 9S-8006 [1] PLUG (7/8-14-THD)  
9. 2M-9780 [1] SEAL-O-RING  
10. 216-5586 [1] BUSHING (CAMSHAFT)  
11. 2W-7213 [6] BUSHING (CAMSHAFT)  
12. 3K-0360 [1] SEAL-O-RING  
13. 9S-8005 [1] PLUG (3/4-16-THD)  
14. 9S-8008 [1] PLUG (1-1/16-12-THD)  
15. 3D-2824 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP25440022
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 98Z15000-UP
PART OF 116-5807, 146-8341 ENGINE AR
i00124616 SEBP2544
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440023
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 98Z15000-28460
PART OF 116-5807, 146-8341 ENGINE AR
i00124617 SEBP2544
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1095 YC [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440024
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 98Z28461-UP
PART OF 146-8341 ENGINE AR
i00918174 SEBP2544
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5403 YC [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440025
 

119-3065: CYLINDER HEAD AS

119-3065 CYLINDER HEAD AS
S/N 98Z15000-UP
PART OF 119-3067 CYLINDER HEAD AS, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@119-3067@@@@@
i00125070 SEBP2544
1193065 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CYLINDER HEAD  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 126-0453 [6] INSERT-VALVE SEAT (INLET)  
4. 119-3061 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
  Z   NOT SERVICED SEPARATELY
 

#SEBP25440026
 

119-3067: CYLINDER HEAD AS

119-3067 CYLINDER HEAD AS
S/N 98Z15000-UP
FIELD REPLACEMENT FOR @@@@@119-3065@@@@@
FIELD INSTALLATION
i00125071 SEBP2544
1193067 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8848 [12] GUIDE-VALVE  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
6. 119-3065 Y [1] CYLINDER HEAD AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440027
 

140-7373: CYLINDER HEAD AS

140-7373 CYLINDER HEAD AS
S/N 98Z32172-UP
FIELD REPLACEMENT FOR @@@@@190-9066@@@@@
i01218673 SEBP2544
1407373 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8848 [12] GUIDE-VALVE  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
6. 190-9066 Y [1] CYLINDER HEAD AS  
7. 3J-7354 [1] SEAL-O-RING  
8. 9S-8002 [1] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440028
 

190-9066: CYLINDER HEAD AS

190-9066 CYLINDER HEAD AS
S/N 98Z32172-UP
PART OF 140-7373 CYLINDER HEAD AS, 140-7371 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
i01516291 SEBP2544
1909066 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
2. 163-9063 [6] INSERT-VALVE SEAT (INLET)  
3. 119-3061 [6] SLEEVE  
4. 8M-5860 [6] PLUG-CUP  
 

#SEBP25440029
 

140-7371: CYLINDER HEAD GP

140-7371 CYLINDER HEAD GP
S/N 98Z32172-UP
PART OF 159-0305, 160-5130 CYLINDER HEAD GP
i01101080 SEBP2544
1407371 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 190-9066 Y [1] CYLINDER HEAD AS  
2. 161-4280 [6] VALVE-INLET  
3. 136-0819 [6] VALVE-EXHAUST  
4. 1W-2715 [24] LOCK-RETAINER  
5. 7E-7779 [12] RETAINER-SPRING  
6. 7C-4273 [12] SPRING-VALVE  
7. 9Y-8848 [12] GUIDE-VALVE  
8. 119-3036 [12] SEAL-VALVE STEM  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/09/05
Cylinder Sleeve Available For Reconditioning Cylinder Blocks {1222}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Long Blocks for Certain Machine Engines {1000, 1201}
2015/06/25

Caterpillar Parts SIS Catalog 120H :

CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
COVER GP-VALVE MECHANISM
9Y-1224 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
COVER GP-CYLINDER BLOCK
115-4179 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
115-4179 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
CYLINDER HEAD AS
119-3067 CYLINDER HEAD AS
CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.