AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

131-6689 HOUSING GP-GOVERNOR S/N 98Z15000-UP PART OF 131-6690 GOVERNOR GP-UNIT INJECTOR 120H MOTOR GRADER


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL
LINES GP-FUEL RATIO CONTROL
GOVERNOR GP
PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER

MOTOR GRADER 120H MOTOR GRADER 2AN
 120H Motor Grader 2AN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2544 120H 2AN   (1996)

FUEL SYSTEM

GOVERNOR GP
147-0858 GOVERNOR GP-UNIT INJECTOR
HOUSING GP-GOVERNOR
113-9858 HOUSING GP-GOVERNOR
HOUSING GP-GOVERNOR
131-6689 HOUSING GP-GOVERNOR
HOUSING GP-GOVERNOR
142-5050 HOUSING GP-GOVERNOR
LINES GP-GOVERNOR OIL
111-2125 LINES GP-GOVERNOR OIL
 

#SEBP25440120
 

131-6689: HOUSING GP-GOVERNOR

131-6689 HOUSING GP-GOVERNOR
S/N 98Z15000-UP
PART OF 131-6690 GOVERNOR GP-UNIT INJECTOR
i00653670 SEBP2544
1316689 HOUSING GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-6688 [1] HOUSING AS-GOVERNOR  
  113-9432 [1] SHAFT-LIMIT  
2. 111-6813 [1] MANIFOLD AS  
  8C-5899 [2] PIN-SPRING  
3. 109-1301 [1] PISTON  
4. 111-3815 [1] COLLAR AS  
5. 8C-5899 [1] PIN-SPRING  
6. 033-6032 [1] SEAL-O-RING  
7. 110-6096 [1] SPRING  
8. 111-1576 [1] SEAL-U-CUP  
9. 2M-9780 [1] SEAL-O-RING  
10. 113-9859 [1] PLUG  
11. 9X-2537 M [3] BOLT-SOCKET HEAD (M6X1X70-MM)  
12. 4T-8691 M [1] NUT  
13. 111-0570 Y [1] VALVE GP-SOLENOID  
14. 033-5879 [1] SEAL-O-RING  
15. 6T-5098 [1] CLIP-CABLE  
16. 099-0822 M [1] BOLT-SOCKET HEAD (M5X0.8X10-MM)  
17. 100-5738 M [1] NUT (M6X0.5-THD)  
18. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
19. 115-9840 [1] SCREW-ADJUSTMENT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440121
 

142-5050: HOUSING GP-GOVERNOR

142-5050 HOUSING GP-GOVERNOR
S/N 98Z18922-UP
PART OF 142-5052 GOVERNOR GP-UNIT INJECTOR
i00663596 SEBP2544
1425050 HOUSING GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-6688 [1] HOUSING AS-GOVERNOR  
  113-9432 [1] SHAFT-LIMIT  
2. 111-6813 [1] MANIFOLD AS  
  8C-5899 [2] PIN-SPRING  
3. 109-1301 [1] PISTON  
4. 111-3815 [1] COLLAR AS  
5. 8C-5899 [1] PIN-SPRING  
6. 033-6032 [1] SEAL-O-RING  
7. 110-6096 [1] SPRING  
8. 111-1576 [1] SEAL-U-CUP  
9. 2M-9780 [1] SEAL-O-RING  
10. 113-9859 [1] PLUG  
11. 9X-2537 M [3] BOLT-SOCKET HEAD (M6X1X70-MM)  
12. 4T-8691 M [1] NUT  
13. 129-7707 Y [1] VALVE GP-SOLENOID  
14. 033-5879 [1] SEAL-O-RING  
15. 6T-5098 [1] CLIP-CABLE  
16. 099-0822 M [1] BOLT-SOCKET HEAD (M5X0.8X10-MM)  
17. 100-5738 M [1] NUT (M6X0.5-THD)  
18. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
19. 115-9840 [1] SCREW-ADJUSTMENT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440122
 

132-0296: LINES GP-FUEL

132-0296 LINES GP-FUEL
S/N 2AN1-UP
PART OF 2C-9623 CHASSIS AR
i00511872 SEBP2544
1320296 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-2308 Y [1] SEPARATOR GP-WATER  
2. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
4. 8T-5043 [2] ADAPTER  
5. 1J-9671 [2] SEAL-O-RING  
6. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
7. 114-6567 I [1] HOSE AS  
8. 6V-8397 [6] SEAL-O-RING  
9. 8T-8916 [1] BOLT (7/16-14X1.5-IN)  
10. 6V-8636 [2] CONNECTOR  
11. 3J-1907 [7] SEAL-O-RING  
12. 2W-2605 [1] PUMP AS-FUEL PRIMING  
  1H-8171 [1] SEAL-O-RING  
  7E-5346 [2] VALVE AS  
13. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
14. 9Y-1760 [1] BRACKET-PRIMING PUMP  
15. 103-2529 E [2] HOSE (30CM EACH)  
16. [1] TUBE  
17. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
18. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
19. 8T-4971 M [1] BOLT (M6X1X30-MM)  
20. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 6V-8189 [1] NUT (5/16-18-THD)  
22. 7X-0447 [1] NUT (7/16-14-THD)  
23. 8T-5360 [1] WASHER (12X22.5X2.5-MM THK)  
24. 6V-8627 [2] ELBOW  
25. 6V-8724 [1] ELBOW  
26. 7I-5418 I [1] HOSE AS  
27. 8W-9339 I [1] HOSE AS  
28. 4J-5477 [2] SEAL-O-RING  
29. 2T-2173 I [1] HOSE AS  
30. 8M-2773 [3] CLIP (LOOP)  
31. 5P-2675 [1] BOLT (1/4-20X1.75-IN)  
32. 6V-4369 [2] CLIP  
33. 4K-8864 [3] CLIP (LOOP)  
34. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
35. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
36. 5P-6944 [1] ADAPTER  
37. 6V-0484 [1] ELBOW  
38. 5P-8874 [1] ADAPTER  
39. 3K-0360 [3] SEAL-O-RING  
40. 6V-8723 [1] ELBOW  
41. 8T-0081 [1] VALVE-BALL  
42. 6D-4972 [1] SPACER (0.344X0.625X0.5-IN THK)  
43. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440123
 

130-8101: LINES GP-FUEL FILTER

130-8101 LINES GP-FUEL FILTER
S/N 98Z15383-UP
PART OF 116-5807, 146-8341 ENGINE AR
i00125098 SEBP2544
1308101 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 8X-6603 I [1] HOSE AS  
3. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
4. 6V-8724 [3] ELBOW  
5. 3J-1907 [12] SEAL-O-RING  
6. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
7. 6V-3822 M [4] BOLT (M10X1.5X35-MM)  
8. 6V-8397 [5] SEAL-O-RING  
9. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
10. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
11. 9S-8004 [2] PLUG (9/16-18-THD)  
12. 5F-7054 [1] SEAL-O-RING  
13. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
14. 7E-5190 [1] TUBE AS  
15. 7E-5189 [1] VALVE AS (FUEL)  
16. 8T-0151 [1] ADAPTER  
17. 6V-3918 M [2] BOLT (M8X1.25X50-MM)  
18. 3N-3252 [1] SPRING  
19. 3E-4353 [6] WASHER-HARD (11X25X3-MM THK)  
20. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
21. 5P-7813 [1] SEAL-O-RING  
22. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
23. 8T-0276 M [3] BOLT (M8X1.25X45-MM)  
24. 6V-1820 M [6] BOLT (M10X1.5X30-MM)  
25. 3E-7410 [2] TEE  
26. 122-9033 I [1] HOSE AS  
27. 132-5549 [1] TUBE AS  
28. 129-1100 [2] VALVE-DRAIN  
29. 6V-8636 [2] CONNECTOR  
30. 129-1102 Y [1] BASE GP-FUEL FILTER  
31. 132-2101 [1] BRACKET AS  
32. 8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
33. 130-8097 [1] BRACKET AS  
34. 8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
35. 8T-3490 M [5] NUT-WELD (M10X1.5-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440124
 

6I-2420: LINES GP-FUEL FILTER

6I-2420 LINES GP-FUEL FILTER
S/N 98Z15000-15382
PART OF 116-5807 ENGINE AR
i00124686 SEBP2544
6I2420 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [1] ELBOW (90 DEGREE)  
5. 3J-1907 [8] SEAL-O-RING  
6. 7W-0183 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [5] SEAL-O-RING  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
11. 115-4233 [1] TUBE AS  
12. 5F-7054 [1] SEAL-O-RING  
13. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
14. 7E-5190 [1] TUBE AS  
15. 7E-5189 [1] VALVE AS (FUEL)  
16. 8T-0151 [1] ADAPTER  
17. 7X-2459 [1] ADAPTER-TEE  
18. 3N-3252 [1] SPRING  
19. 5P-7813 [1] SEAL-O-RING  
20. 5P-1046 [1] CONNECTOR  
21. 5P-4961 [2] CLAMP-HOSE  
22. 5P-1442 E HOSE  
23. 6I-2422 [1] VALVE AS  
24. 6V-8774 [1] TEE  
25. 8T-0788 [1] ELBOW  
26. 115-4184 [1] TEE-O-RING PORT  
27. 4K-8864 [1] CLIP (LOOP)(CIRCULAR)  
28. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
29. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
30. 8L-5449 [1] SPACER (0.375X0.75X0.69-IN THK)  
31. 068-9526 [1] CAP-TUBE  
32. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
33. 5C-7261 M [1] NUT (M8X1.25-THD)  
34. 3S-2093 [1] STRAP-CABLE  
35. 119-2955 [1] CLIP  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP25440125
 

4P-7591: LINES GP-FUEL RATIO CONTROL

4P-7591 LINES GP-FUEL RATIO CONTROL
S/N 98Z15000-UP
PART OF 116-5807, 146-8341 ENGINE AR
i00124628 SEBP2544
4P7591 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [1] CONNECTOR  
2. 6V-8723 [1] ELBOW  
3. 4P-7301 [1] TUBE AS  
4. 3K-0360 [1] SEAL-O-RING  
5. 4J-5477 [1] SEAL-O-RING  
6. 3J-7354 [1] SEAL-O-RING  
7. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 6V-8397 [1] SEAL-O-RING  
9. 8M-2772 [1] CLIP (LOOP)  
 

#SEBP25440126
 

111-2125: LINES GP-GOVERNOR OIL

111-2125 LINES GP-GOVERNOR OIL
S/N 98Z15000-UP
PART OF 113-6189, 147-0858 GOVERNOR GP-UNIT INJECTOR
i00124999 SEBP2544
1112125 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [2] CONNECTOR  
2. 111-2127 [1] TUBE AS  
3. 6V-8773 [1] TEE-FACE SEAL  
4. 7W-0367 [1] TUBE AS  
5. 3J-7354 [3] SEAL-O-RING  
6. 4J-5477 [4] SEAL-O-RING  
 

#SEBP25440127
 

107-7732: PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 98Z15000-18130
PART OF 116-5807 ENGINE AR
i00124987 SEBP2544
1077732 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
2. 107-7733 [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 125-8274 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP25440128
 

107-7732: PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 98Z18131-UP
PART OF 116-5807, 146-8341 ENGINE AR
i00124988 SEBP2544
1077732 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-5925 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
2. 127-8216 C [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 125-8274 [1] SEAL-O-RING (7.59MM'ID)  
5. 9X-8267 C [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25440129
 

127-2308: SEPARATOR GP-WATER

127-2308 SEPARATOR GP-WATER
S/N 2AN56-UP
PART OF 132-0296 LINES GP-FUEL
i00125087 SEBP2544
1272308 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-8460 [2] PLUG (1/2-20-THD)  
2. 117-4089 [1] ELEMENT-WATER SEPARATOR  
3. 118-1461 [1] BASE AS  
4. 118-8118 [1] RING-RETAINING  
5. 118-8119 [1] NUT  
6. 5P-7814 [2] SEAL-O-RING  
7. 112-9401 [1] BOWL AS-WATER COLLECTION  
  128-8614 [1] KIT-SEAL (WATER SEPARATOR)  
   
    AVAILABLE REPAIR KIT(S):
  121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)  
    (INCLUDES PLUGS, SEALS, RETAINING RING, & CAPS)
 

Information:

Operation and Maintenance Manual
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
120H Motor Grader
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Control
120H and 135H Motor Graders Power Train
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog 120H :

HOUSING GP-GOVERNOR
113-9858 HOUSING GP-GOVERNOR
147-0858 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
142-5052 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
142-1422 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-7916 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-6690 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
116-6499 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
116-6499 GOVERNOR GP-UNIT INJECTOR
HOUSING GP-GOVERNOR
142-5050 HOUSING GP-GOVERNOR
LINES GP-FUEL
132-0296 LINES GP-FUEL
LINES GP-FUEL FILTER
130-8101 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
6I-2420 LINES GP-FUEL FILTER
LINES GP-FUEL RATIO CONTROL
4P-7591 LINES GP-FUEL RATIO CONTROL
LINES GP-GOVERNOR OIL
111-2125 LINES GP-GOVERNOR OIL
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.