AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

131-3740 LINK GP-STEERING S/N 2AN1-UP PART OF 101-8075, 134-1080 AXLE GP-FRONT 120H MOTOR GRADER


FRAME AND BODY
LINK GP-STEERING
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
FRAME AND BODY
PLATE GP
STEP GP
BRAKING SYSTEM
BRAKE GP
CONTROL GP

MOTOR GRADER 120H MOTOR GRADER 2AN
 120H Motor Grader 2AN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2544 120H 2AN   (1996)

FRAME AND BODY

LINK GP-STEERING
LINK GP-STEERING
131-3740 LINK GP-STEERING
 

#SEBP25440340
 

131-3740: LINK GP-STEERING

131-3740 LINK GP-STEERING
S/N 2AN1-UP
PART OF 101-8075, 134-1080 AXLE GP-FRONT
i00125103 SEBP2544
1313740 LINK GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-3739 [1] TIE ROD  
2. 131-3738 [1] TIE ROD GP (LH THREAD, RH)  
  2F-8057 [1] NUT-SLOTTED  
  132-1143 [1] SEAL-BOOT  
3. 131-3737 [1] TIE ROD GP (RH THREAD, LH)  
  2F-8057 [1] NUT-SLOTTED  
  132-1143 [1] SEAL-BOOT  
4. 132-1144 [2] CLAMP  
5. 1B-4367 [2] BOLT (5/8-11X3-IN)  
6. 3K-2889 [2] LOCKNUT (5/8-11-THD)  
 

#SEBP25440341
 

2C-9679: MOUNTING GP-REGISTRATION

2C-9679 MOUNTING GP-REGISTRATION
S/N 2AN82-UP
PART OF 2C-9520 GENERAL AR
i00660323 SEBP2544
2C9679 MOUNTING GP-REGISTRATION Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-5264 [1] PLATE-MOUNTING  
2. 134-2176 Y [2] LAMP GP-REGISTRATION PLATE  
3. 5P-5624 D [2] WIRE (14-GA, BLACK)(0.75M EACH)  
4. 134-2185 [2] CONNECTOR-WIRE  
5. 2D-9535 [2] GROMMET  
6. 4M-6425 [3] BOLT (5/16-18X1-IN)  
7. 031-4155 [3] LOCKNUT (5/16-18-THD)  
8. 4D-1326 [6] LOCKWASHER  
9. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440342
 

2C-9550: PLATE GP-PUSH

2C-9550 PLATE GP-PUSH
S/N 2AN1-UP
PART OF 2C-9520 GENERAL AR
i00124580 SEBP2544
2C9550 PLATE GP-PUSH Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2C-9551 [1] PLATE AS-PUSH  
  5J-7333 [2] HOOK  
  9D-5659 [2] BOSS (3/8-16X1.19-IN)  
2. 129-8989 [1] PLATE  
3. 5P-5923 BD SEAL  
4. 112-5855 [2] BRACKET AS  
5. 8C-6857 [8] BOLT (3/4-10X2.75-IN)  
6. 5P-6652 [8] WASHER (20X44.5X6-MM THK)  
7. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
8. 5P-1075 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 5S-7379 [6] BOLT (3/8-16X0.875-IN)  
11. 134-2042 [1] PLATE  
12. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP25440343
 

8X-1030: STEP GP

8X-1030 STEP GP
S/N 2AN1-UP
PART OF 2C-9623 CHASSIS AR
i00124859 SEBP2544
8X1030 STEP GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-9804 [8] PLATE  
2. 4V-9809 [2] STEP AS  
3. 8X-1032 [4] SUPPORT-STEP (RUBBER)  
4. 123-3698 [2] PLATE  
5. 123-3699 [2] PLATE  
6. 198-7379 [2] STEP AS  
7. 198-7380 [2] STEP AS  
8. 1D-4689 [24] BOLT (1/2-13X1.75-IN)  
9. 1K-6872 [24] LOCKNUT (1/2-13-THD)  
10. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
11. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
 

#SEBP25440344
 

9W-5132: BRAKE GP-PARKING

9W-5132 BRAKE GP-PARKING
S/N 7JX800-99999; 4KY451-UP
PART OF 144-2232, 9W-5126 TRANSMISSION AR
i00124932 SEBP2544
9W5132 BRAKE GP-PARKING Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5842 M [6] BOLT (M10X1.5X40-MM)  
2. 6V-5839 [6] WASHER (11X21X2.5-MM THK)  
3. 6Y-3849 [1] HUB-CLUTCH  
4. 9M-4335 [6] DOWEL-REACTION  
5. 5J-1086 [1] SEAL-O-RING  
6. 6Y-3850 [1] HOUSING-BRAKE  
7. 4S-5838 [1] RETAINER  
8. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
9. 4F-7390 [1] SEAL-O-RING  
10. 1P-7521 [1] YOKE  
11. 7D-8436 [1] SEAL-D-RING  
12. 9W-4431 [20] SPRING  
13. 9W-4430 [20] SPRING  
14. 6V-3668 M [12] BOLT (M12X1.75X30-MM)  
15. 7G-0437 [6] PLATE-CLUTCH  
16. 6Y-5352 [5] DISC-FRICTION  
17. 2J-6274 [1] SEAL-O-RING  
18. 9S-4182 [1] PLUG (7/16-20-THD)  
19. 3J-7354 [1] SEAL-O-RING  
20. 8D-8795 [1] SEAL-D-RING  
21. 9W-4452 [1] PISTON  
22. 9W-4453 [1] PISTON  
23. 4H-9105 [1] SEAL-O-RING  
24. 6Y-3852 [1] PLUG  
25. 9N-6152 [1] PLUG  
26. 2M-9780 [1] SEAL-O-RING  
27. 1M-3003 [1] SEAL-LIP TYPE  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25440345
 

8W-6275: BRAKE GP-SERVICE

8W-6275 BRAKE GP-SERVICE
S/N 2AN1-UP
PART OF 115-4848 POWER TRAIN AR
i00124844 SEBP2544
8W6275 BRAKE GP-SERVICE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0314 [12] BOLT-LOCKING (1/2-13X2-IN)  
2. 8W-0789 [4] RETAINER  
3. 234-0226 [4] HOUSING  
4. 147-3309 [4] SPINDLE-WHEEL  
5. 3S-0303 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  3S-0302 [2] RING-SEALING  
6. 4D-3704 [64] WASHER-HARD (17X30X5-MM THK)  
7. 8D-8791 B [24] SHIM (0.007-MM THK)(18MM THK)  
8. 8D-8792 B [24] SHIM (0.005-MM THK)(13MM THK)  
9. 9D-7085 B [8] SHIM (0.02-MM THK)(15MM THK)  
10. 102-1691 [4] SPROCKET  
11. 2N-2138 [4] CUP-BEARING  
12. 2N-2139 [4] CONE-BEARING  
13. 4S-5879 [8] SEAL-O-RING  
14. [40] BOLT-LOCKING (5/8-11X2.25-IN)  
15. 6Y-7915 [40] DISC-FRICTION  
16. 8D-8794 [44] DISC  
17. 8X-2988 [4] COVER  
18. 6G-0905 [24] BOLT (7/16-14X4.37-IN)  
19. 5P-8244 [24] WASHER-HARD (12X22.5X2.5-MM THK)  
20. 9J-5498 [24] SPRING  
21. 5P-6241 [8] BOLT-LOCKING (5/8-11X2.62-IN)  
22. 9D-3241 [4] CUP-BEARING  
23. 9D-3242 [4] CONE-BEARING  
24. 9D-4029 [4] SPACER (3.014X3.75X0.75-IN THK)  
25. 9D-7972 [4] SEAL-D-RING  
26. 8D-8795 [4] SEAL-D-RING  
27. 3J-5390 [4] PLUG (3/8-18-THD)  
28. 4B-4043 [16] BOLT (5/8-11X1.375-IN)  
29. 2G-6336 [4] HUB-BRAKE  
30. 2G-5369 [4] PISTON  
  B   USE AS REQUIRED
 

#SEBP25440346
 

8W-5934: CONTROL GP-PARKING BRAKE

8W-5934 CONTROL GP-PARKING BRAKE
S/N 2AN1-UP
PART OF 2C-9623 CHASSIS AR
i00124823 SEBP2544
8W5934 CONTROL GP-PARKING BRAKE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-8528 [2] SLEEVE  
2. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
3. 4S-7529 I [1] HOSE AS  
4. 8X-5160 [1] GROMMET  
5. 5H-4778 [2] ELBOW  
6. 3B-8822 [1] ELBOW  
7. 4S-7606 [2] ELBOW  
8. 5D-4382 Y [1] VALVE GP-AIR CONTROL (PARKING BRAKE)  
9. 5K-2408 [2] FITTING  
10. 7T-9074 Y [1] VALVE GP-SOLENOID (24-VOLT)(PARKING BRAKE)  
11. 6D-1432 [1] VALVE-CHECK (PARKING BRAKE)  
12. 4D-6585 [1] ELBOW-PIPE  
13. 5T-8285 [1] JUNCTION BLOCK  
14. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
15. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 112-4834 I [1] HOSE AS  
17. 7D-3963 I [1] HOSE AS  
18. 7X-4736 [1] GROMMET  
19. 4H-6147 [1] CONNECTOR  
20. 3D-8884 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440347
 

8X-4645: CONTROL GP-SERVICE BRAKE

8X-4645 CONTROL GP-SERVICE BRAKE
S/N 2AN1-UP
PART OF 2C-9623 CHASSIS AR
Type 1
i00124896 SEBP2544
8X4645 CONTROL GP-SERVICE BRAKE Parts scheme 8X4645 CONTROL GP-SERVICE BRAKE Parts scheme 8X4645 CONTROL GP-SERVICE BRAKE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6147 [1] CONNECTOR  
2. 3D-8913 [2] ELBOW (90 DEG)  
3. 8W-8528 [5] SLEEVE  
4. 8W-1614 [2] CLIP  
5. 4S-7558 I [1] HOSE AS  
6. 9G-9154 [1] CLIP  
7. 4M-8973 [1] ELBOW  
8. 4D-2560 [1] CONNECTOR-PIPE  
9. 6V-8189 [3] NUT (5/16-18-THD)  
10. 3S-2093 [1] STRAP-CABLE  
11. 8X-7603 [2] HOSE AS  
12. 5J-3658 [1] ROD  
13. 4L-6454 [2] BOLT (3/8-16X1-IN)  
14. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 5P-0767 E HOSE  
16. 5T-8285 [1] JUNCTION BLOCK  
17. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
18. 8L-6005 [1] TEE-PIPE  
19. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 1H-7724 [1] BUSHING-REDUCER  
21. 6V-4245 [1] ELBOW  
22. 4D-0582 [1] ELBOW (45 DEG)  
23. 4J-3914 [1] ELBOW (90 DEG)  
24. 8X-2650 Y [1] VALVE GP-AIR CONTROL (SERVICE BRAKE)  
25. 2D-7325 [1] TEE-PIPE  
26. 7J-8611 [1] ELBOW-PIPE (90 DEG)  
27. 4M-6425 [3] BOLT (5/16-18X1-IN)  
28. 1F-4622 [2] BEARING AS-NEEDLE  
29. 1B-0676 [2] PIN  
30. 7V-0446 [2] CLIP  
31. 8X-2499 [1] PEDAL-BRAKE  
32. 5H-4778 [1] ELBOW  
33. 5D-7464 I [1] HOSE AS  
34. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
35. 4L-6454 [2] BOLT (3/8-16X1-IN)  
36. 8W-8527 [12] SLEEVE  
37. 8W-8903 [1] CLIP  
38. 9D-0771 I [1] HOSE AS  
39. 8X-4876 [2] TUBE AS  
40. 9X-8606 [8] CLIP  
41. 4D-0577 [2] ELBOW  
42. 8T-9056 [4] BOLT (3/8-16X1.25-IN)  
43. 6G-1415 [2] JUNCTION BLOCK  
44. 7M-7410 [2] PLUG-PIPE  
45. 5K-9238 [4] CONNECTOR  
46. 5J-9602 I [2] HOSE AS  
47. 8X-4877 [2] TUBE AS  
48. 8D-7026 [4] GUARD  
49. 6K-6826 [4] ELBOW (45-DEG)  
50. 5K-6875 [4] ADAPTER  
51. 5P-0721 E HOSE (168 CM)  
  2D-6386 [2] COUPLING  
52. 8W-8532 [1] CLIP  
53. 9S-1302 [2] WASHER (27X44.45X2.5-MM THK)  
54. 2M-1908 [2] FITTING-BULKHEAD  
55. 4D-0582 [4] ELBOW (45 DEG)  
56. 7D-7419 I [2] HOSE AS  
57. 8X-7601 [2] CLAMP  
58. 8X-8271 [2] CLAMP  
59. 8X-8921 [2] CLAMP  
60. 6V-8801 [5] NUT (3/8-16-THD)  
61. 8T-4896 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
62. 8X-8451 [2] PLATE  
63. 3T-0050 [2] CLIP  
64. 8W-8527 [2] SLEEVE  
65. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
66. 8X-2497 [1] LEVER  
67. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
68. 4J-8922 [2] ROD END (3/8-24-THD)  
69. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
70. 8X-8450 [1] PLATE  
71. 8W-8537 [4] CLAMP  
72. 109-3953 [1] BRACKET AS  
  8D-8879 [2] STUD (3/8-16X3.38-IN)  
  9F-2978 [2] NUT-WELD (3/8-16-THD)  
73. 5M-3062 [6] BOLT (3/8-16X0.75-IN)  
74. 110-3326 [1] PLATE AS  
  3Y-7829 [1] BOSS (3/8-16-THD)  
75. 9J-8783 [1] SHIM (0.508-MM THK)  
76. 8L-6005 [2] TEE-PIPE  
77. 4D-0577 [1] ELBOW  
78. 1H-7724 [2] BUSHING-REDUCER  
79. 8X-2680 [1] BRACKET AS  
  [2] GUSSET  
80. 7M-7410 [2] PLUG-PIPE  
81. 2L-3331 [2] CONNECTOR-PIPE  
82. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
83. 3B-7721 [1] BUSHING-REDUCER  
84. 3K-6060 [8] LOCKNUT (3/8-16-THD)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440348
 

8X-4645: CONTROL GP-SERVICE BRAKE

8X-4645 CONTROL GP-SERVICE BRAKE
S/N 2AN1-UP
PART OF 2C-9623 CHASSIS AR
Type 2
i01631532 SEBP2544
8X4645 CONTROL GP-SERVICE BRAKE Parts scheme 8X4645 CONTROL GP-SERVICE BRAKE Parts scheme 8X4645 CONTROL GP-SERVICE BRAKE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6147 [1] CONNECTOR  
2. 3D-8913 [2] ELBOW  
3. 8W-8528 [5] SLEEVE  
4. 8W-1614 [2] CLIP  
5. 4S-7558 I [1] HOSE AS  
6. 9G-9154 [1] CLIP  
7. 4M-8973 [1] ELBOW  
8. 4D-2560 [1] CONNECTOR-PIPE  
9. 6V-8189 [3] NUT (5/16-18-THD)  
10. 3S-2093 [1] STRAP-CABLE  
11. 8X-7603 [2] HOSE AS  
12. 177-1713 [1] ROD  
13. 4L-6454 [4] BOLT (3/8-16X1-IN)  
14. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 5P-0767 E HOSE (60 CM)  
16. 5T-8285 [1] JUNCTION BLOCK  
17. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
18. 8L-6005 [3] TEE-PIPE  
19. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 1H-7724 [3] BUSHING-REDUCER  
21. 6V-4245 [1] ELBOW  
22. 4D-0582 [5] ELBOW  
23. 4J-3914 [1] ELBOW  
24. 8X-2650 Y [1] VALVE GP-AIR CONTROL  
25. 2D-7325 [1] TEE-PIPE  
26. 7J-8611 [1] ELBOW-PIPE  
27. 6V-8918 [3] BOLT (5/16-18X1.25-IN)  
28. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
29. 8T-4896 [22] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 1F-4622 [2] BEARING AS-NEEDLE  
31. 1B-0676 [1] PIN  
32. 7V-0446 [2] CLIP  
33. 207-4924 [1] PEDAL-BRAKE  
34. 5H-4778 [1] ELBOW  
35. 6D-9855 I [1] HOSE AS  
36. 8W-8527 [14] SLEEVE  
37. 8W-8903 [1] CLIP  
38. 9D-0771 I [1] HOSE AS  
39. 8X-4877 [2] TUBE AS  
40. 9X-8606 [8] CLIP  
41. 4D-0577 [3] ELBOW  
42. 8T-9056 [4] BOLT (3/8-16X1.25-IN)  
43. 6G-1415 [2] JUNCTION BLOCK  
44. 7M-7410 [4] PLUG-PIPE  
45. 5K-9238 [4] CONNECTOR  
46. 5J-9602 I [1] HOSE AS  
47. 8X-4876 [2] TUBE AS  
48. 8D-7026 [4] GUARD  
49. 6K-6826 [4] ELBOW (45-DEG)  
50. 5K-6875 [4] ADAPTER  
51. 5P-0721 E HOSE (168 CM)  
  2D-6386 [2] COUPLING  
52. 8W-8532 [1] CLIP  
53. 9S-1302 [2] WASHER (27X44.45X2.5-MM THK)  
54. 2M-1908 [2] FITTING-BULKHEAD  
55. 7D-7419 I [2] HOSE AS  
56. 8X-7600 I [1] HOSE AS  
57. 8X-7601 [2] CLAMP  
58. 8X-8271 [2] CLAMP  
59. 8X-8921 [2] CLAMP  
60. 6V-8801 [4] NUT (3/8-16-THD)  
61. 8X-8451 [2] PLATE  
62. 3T-0050 [2] CLIP  
63. 8X-2497 [1] LEVER  
64. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
65. 4J-8922 [1] ROD END (3/8-24-THD)  
66. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
67. 8X-8450 [1] PLATE  
68. 8W-8537 [4] CLAMP  
69. 109-3953 [1] BRACKET AS  
  8D-8879 [2] STUD (3/8-16X3.38-IN)  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
70. 5M-3062 [5] BOLT (3/8-16X0.75-IN)  
71. 110-3326 [1] PLATE AS  
72. 9J-8783 B [1] SHIM (0.508-MM THK)  
73. 8X-2680 [1] BRACKET AS  
74. 2L-3331 [2] CONNECTOR-PIPE  
75. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
76. 3B-7721 [1] BUSHING-REDUCER  
77. 3K-6060 [8] LOCKNUT (3/8-16-THD)  
78. 1B-2578 [1] NUT (3/8-16-THD)  
79. 3K-8280 [1] PIN-CLEVIS  
80. 185-1122 [1] BRACKET  
81. 6W-5817 [1] SPRING  
82. 8T-4138 M [1] BOLT (M6X1X20-MM)  
83. 5C-2890 M [2] NUT (M6X1-THD)  
84. 169-0921 [1] ROD END (3/8-24 LH-THD)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440349
 

3Q-9234: KIT-AIR INFLATION

3Q-9234 KIT-AIR INFLATION
S/N 2AN1-UP
AN ATTACHMENT
i00664668 SEBP2544
3Q9234 KIT-AIR INFLATION Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. H [1] HOSE AS  
2. 7Z-3788 H [1] HOSE AS  
3. 129-9005 [1] PLATE  
4. 7Z-3792 [1] COUPLING  
5. 2M-1908 [1] FITTING-BULKHEAD  
6. 4K-8278 I [1] HOSE AS  
7. 9M-5501 [1] ELBOW-STREET  
8. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 2C-8692 [1] FILM  
10. 4D-0582 [1] ELBOW  
  H   TO BE STORED LOOSE ON MOTOR GRADER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Operation and Maintenance Manual
Kingpin Bearings - Lubricate
120H Motor Grader
Reuse And Salvage Guidelines
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
Disassembly and Assembly
Steering Tie Rod
120H & 135H MOTOR GRADERS MACHINE SYSTEM

Caterpillar Parts SIS Catalog 120H :

LINES GP-LUBRICATION
7I-4610 LINES GP-LUBRICATION
HITCH GP-TOWING
167-0203 HITCH GP-TOWING
HITCH GP-ARTICULATING
106-4883 HITCH GP-ARTICULATING
GUARD GP-LIGHTING
3Q-9248 GUARD GP-LIGHTING
GUARD GP-DRIVE SHAFT
8W-5870 GUARD GP-DRIVE SHAFT
GUARD GP-BOTTOM
8W-6230 GUARD GP-BOTTOM
GUARD GP-BOTTOM
2C-9613 GUARD GP-BOTTOM
GUARD GP-BOTTOM
203-2260 GUARD GP-BOTTOM
MOUNTING GP-REGISTRATION
2C-9679 MOUNTING GP-REGISTRATION
PLATE GP-PUSH
2C-9550 PLATE GP-PUSH
STEP GP
8X-1030 STEP GP
BRAKE GP-PARKING
9W-5132 BRAKE GP-PARKING
BRAKE GP-SERVICE
8W-6275 BRAKE GP-SERVICE
CONTROL GP-PARKING BRAKE
8W-5934 CONTROL GP-PARKING BRAKE
CONTROL GP-SERVICE BRAKE
8X-4645 CONTROL GP-SERVICE BRAKE
CONTROL GP-SERVICE BRAKE
8X-4645 CONTROL GP-SERVICE BRAKE

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.