AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-7984 TANK & FILTER GP-HYDRAULIC S/N 2AN1-UP PART OF 8X-2369 TANK & MTG GP-HYDRAULIC 120H MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
SHAFT GP
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 120H MOTOR GRADER 2AN
 120H Motor Grader 2AN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2544 120H 2AN   (1996)

HYDRAULIC SYSTEM

TANK GP
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
 

#SEBP25440420
 

9T-7984: TANK & FILTER GP-HYDRAULIC

9T-7984 TANK & FILTER GP-HYDRAULIC
S/N 2AN1-UP
PART OF 8X-2369 TANK & MTG GP-HYDRAULIC
i00124926 SEBP2544
9T7984 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7985 [1] TANK AS  
2. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
3. 9J-1991 [1] HANDLE  
4. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
5. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8X-5734 [1] PLATE  
7. 8X-5735 [1] PLATE  
8. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
9. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
10. 5D-1911 [1] COVER-HYDRAULIC CAP  
11. 9M-7394 [1] LEVER  
12. 1L-5072 [1] DOWEL  
13. 0S-1594 [70] BOLT (3/8-16X1-IN)  
14. 2K-4973 [84] LOCKNUT (3/8-16-THD)  
15. 1R-0722 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)  
16. 6E-2266 [1] ROD-THREADED  
17. 9J-1979 [1] RETAINER AS  
18. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 7D-1195 [1] SEAL-O-RING  
20. 9J-1988 [1] VALVE  
21. 9J-1985 [1] TUBE AS  
22. 1L-4349 [1] SPRING  
23. 3G-3498 [1] FLANGE  
24. 5K-9107 [2] BOLT-LOCKING (3/8-16X0.75-IN)  
25. 2S-5100 [1] VALVE-MANUAL  
26. 6E-2267 [1] CAP  
27. 6D-9157 [1] SEAL-O-RING  
28. 7H-1447 [1] CAP-FILLER (HYDRAULIC)  
29. 8T-2275 [1] BALL  
30. 2D-4202 [1] PLATE  
31. 9H-6454 [1] GASKET  
32. 3G-0361 [1] GASKET  
33. 9J-3047 [1] STRAINER (HYDRAULIC)  
34. 3G-2692 [1] RETAINER  
35. 6E-2169 [1] PLATE-INDICATOR  
36. 4J-8251 [1] GROMMET  
37. 4J-8252 [1] GAUGE-SIGHT  
38. 5D-0353 [2] BOLT-LOCKING (3/8-16X1-IN)  
39. 5H-6005 [2] SEAL-O-RING  
40. 5P-9119 BD GASKET-TAPE (ADHESIVE BACKED)  
41. 6E-2269 [1] COVER  
42. 9R-1451 [1] SPACER  
43. 086-0507 [1] PIN  
44. 2J-7761 [1] RING-RETAINING  
45. 4D-7794 [3] CLIP  
46. 4M-6921 [1] WASHER-SPRING  
47. 9S-4183 [1] PLUG (1-1/16-12-THD)  
48. 3D-2824 [1] SEAL-O-RING  
49. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP25440421
 

214-1983: TANK & MTG GP-HYDRAULIC

214-1983 TANK & MTG GP-HYDRAULIC
S/N 2AN318-UP
PART OF 2C-9623 CHASSIS AR
i01631927 SEBP2544
2141983 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
2. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 214-1984 Y [1] TANK & FILTER GP-HYDRAULIC  
4. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440422
 

8X-2369: TANK & MTG GP-HYDRAULIC

8X-2369 TANK & MTG GP-HYDRAULIC
S/N 2AN1-UP
PART OF 2C-9623 CHASSIS AR
i00124879 SEBP2544
8X2369 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7984 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 8X-5731 [2] PLATE  
3. 9D-7924 [2] MOUNTING AS  
4. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
5. 8T-9377 [2] BOLT (3/8-16X2.25-IN)  
6. 6V-8801 [2] NUT (3/8-16-THD)  
7. 7X-0602 [2] WASHER-HARD (10X38X1.6-MM THK)  
8. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 8X-5733 [1] PLATE  
10. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
11. 7I-4749 [2] BAR  
12. 8X-5732 [1] PLATE  
13. 8T-9391 [4] BOLT (1/2-13X3.75-IN)  
14. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8D-3786 [2] MOUNTING  
16. 6V-6563 [2] WASHER (13.5X40X5-MM THK)  
17. 6V-8188 [2] NUT (1/2-13-THD)  
18. 5P-8502 A [1] PADLOCK GP  
  5P-8500 [1] KEY  
  8Y-6364 [1] SLEEVE  
19. 7I-4750 [4] SPACER (15.5X44.5X14-MM THK)  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440423
 

8X-2369: TANK & MTG GP-HYDRAULIC

8X-2369 TANK & MTG GP-HYDRAULIC
S/N 2AN1-317
PART OF 2C-9623 CHASSIS AR
i01477362 SEBP2544
8X2369 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7984 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 8X-5731 [2] PLATE  
3. 9D-7924 [2] MOUNTING AS  
4. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
5. 8T-9377 [2] BOLT (3/8-16X2.25-IN)  
6. 6V-8801 [2] NUT (3/8-16-THD)  
7. 7X-0602 [2] WASHER-HARD (10X38X1.6-MM THK)  
8. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 8X-5733 [1] PLATE  
10. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
11. 7I-4749 [2] BAR  
12. 8X-5732 [1] PLATE  
13. 8T-9391 [4] BOLT (1/2-13X3.75-IN)  
14. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8D-3786 [2] MOUNTING  
16. 6V-6563 [2] WASHER (13.5X40X5-MM THK)  
17. 6V-8188 [2] NUT (1/2-13-THD)  
18. 5P-8502 [1] PADLOCK GP (HYDRAULIC TANK)  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
19. 7I-4750 [4] SPACER (15.5X44.5X14-MM THK)  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440424
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 2AN1-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00125009 SEBP2544
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
3. 027-1287 [1] FITTING-GREASE  
4. 9K-2721 [2] LOCKWASHER  
5. 6G-6623 [1] SEAL  
6. 5H-3593 [1] RETAINER-FELT  
7. 6G-4358 [1] YOKE  
8. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP25440425
 

7I-4622: VALVE & LINKAGE GP

7I-4622 VALVE & LINKAGE GP -HYDRAULIC CONTROL
S/N 2AN1-UP
PART OF 2A-6899 CONTROL AR-HYDRAULIC
i00124759 SEBP2544
7I4622 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3032 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8645 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [2] LEVER (ARTICULATION/RIPPER)  
5. 8D-5634 [2] LEVER (CENTERSHIFT/BLADE LIFT)  
6. 8X-4276 [9] ROD  
7. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
8. 7H-3641 [18] END-ROD (5/16-24-THD)  
9. 8D-5633 [2] LEVER (WHEEL LEAN/SIDESHIFT)  
10. 101-2458 [1] LEVER (BLADE TIP)  
11. 137-4515 [2] BUSHING  
12. 8D-5640 [11] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [18] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [9] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER (BLADE LIFT/CIRCLE DRIVE)  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
34. 6V-8188 [2] NUT (1/2-13-THD)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 104-7740 [1] PLATE AS (LH)  
39. 104-7419 [1] PLATE AS (RH)  
    (EA PLATE AS INCL)
40. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
41. 2G-6740 [1] KNOB-RIPPER  
42. 137-4516 [1] SHAFT  
43. 104-7429 [2] PLATE  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440426
 

8X-1949: VALVE & LINKAGE GP

8X-1949 VALVE & LINKAGE GP
S/N 2AN1-UP
PART OF 2C-9645 BLADE AR
i00124873 SEBP2544
8X1949 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3032 Y [1] VALVE GP-BANK 4 (RH)  
2. 6E-3038 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER  
5. 8D-5634 [2] LEVER  
6. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
7. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
8. 8X-4276 [8] ROD  
  6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
9. 8D-5633 [2] LEVER  
10. 101-2458 [1] LEVER  
11. 8X-4279 [2] SPACER (84-MM THK)  
12. 8D-5640 [10] BEARING  
13. 8D-5636 B [4] SHIM (0.254-MM THK)  
14. 8D-5637 B [4] SHIM (0.762-MM THK)  
15. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
16. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
17. 3F-9556 [16] LOCKWASHER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 8D-5641 [8] BEARING  
20. 2G-6757 [1] KNOB-BLADE LIFT  
21. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
22. 2G-6749 [1] KNOB-SIDESHIFT  
23. 2G-6747 [1] KNOB-BLADE TIP  
24. 8D-5632 [2] LEVER  
25. 2G-6751 [1] KNOB-CIRCLE DRIVE  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6756 [1] KNOB-WHEEL LEAN  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6755 [1] KNOB-CENTERSHIFT  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 9M-1853 [6] MOUNTING  
32. 6V-8188 [2] NUT (1/2-13-THD)  
33. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 9D-2804 [1] SHAFT  
38. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
39. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
40. 104-7429 [2] PLATE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440427
 

6E-3032: VALVE GP-BANK 4

6E-3032 VALVE GP-BANK 4
S/N 2AN1-UP
PART OF 7I-4622, 8X-1949 VALVE & LINKAGE GP
i00124667 SEBP2544
6E3032 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 6E-3031 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. [1] PLATE-IDENTIFICATION (VALVE)  
12. 9S-4180 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440428
 

6E-3038: VALVE GP-BANK 4

6E-3038 VALVE GP-BANK 4
S/N 2AN1-UP
PART OF 8X-1949 VALVE & LINKAGE GP
i00124673 SEBP2544
6E3038 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. [1] PLATE-IDENTIFICATION  
12. 9S-4180 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440429
 

104-8645: VALVE GP-BANK 5

104-8645 VALVE GP-BANK 5
S/N 2AN1-UP
PART OF 7I-4622 VALVE & LINKAGE GP
i00124958 SEBP2544
1048645 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)(BLADE LIFT)  
9. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
10. 101-9346 [1] COVER  
11. 9S-4180 [1] PLUG  
12. 4J-7533 [1] SEAL-O-RING  
13. [1] PLATE-IDENTIFICATION  
14. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Hydraulic System Oil Filter - Replace
120H Motor Grader
Hydraulic System Oil - Change
120H Motor Grader
Hydraulic System Oil Level - Check
120H Motor Grader
Hydraulic System Oil Sample - Obtain
120H Motor Grader
Technical Information Bulletin
Hydraulic Tank Baffle on Motor Graders{4332, 5056, 5068}
Hydraulic Tank Baffle on Motor Graders{4332, 5056, 5068}
Specifications
Hydraulic Tank and Filter
120H Motor Grader Hydraulic and Steering System
Hydraulic Tank Mounting
120H Motor Grader Hydraulic and Steering System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Tank and Filter
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Hydraulic Tank and Filter
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Transmission Magnetic Screen Filter Group
120H & 135H MOTOR GRADERS POWER TRAIN
Transmission Magnetic Screen Filter Base
120H & 135H MOTOR GRADERS POWER TRAIN
Hydraulic Oil Tank Filter
120H & 135H MOTOR GRADERS MACHINE SYSTEM
Hydraulic Oil Tank
120H & 135H MOTOR GRADERS MACHINE SYSTEM
Service Magazine
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14
New Screen Covers For Hoods And Side Panel Louvers Now Available To Prevent Debris And Snow Ingress {7315,1151}
1997/12/22
New Spacer For Hydraulic Filter And Rod Assembly In Hydraulic Tank And Filter Now Available {5056}
1999/11/22
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 120H :

TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
9T-5604 SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
PUMP GP-PISTON
6E-3136 PUMP GP-PISTON
PUMP GP-METERING
102-1501 PUMP GP-METERING
PUMP & MTG GP-STEERING
8X-2379 PUMP & MTG GP-STEERING
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
7I-4622 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8X-1949 VALVE & LINKAGE GP
VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4
VALVE GP-BANK 4
6E-3038 VALVE GP-BANK 4

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.