AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8T-8808 VALVE GP-SOLENOID S/N 2AN1-UP PART OF 8X-7564 CONTROL GP-CENTERSHIFT LOCK, 142-8205 LOCK GP-CENTERSHIFT 120H


HYDRAULIC SYSTEM
VALVE GP-SOLENOID
IMPLEMENTS
BULLDOZER GP
CIRCLE GP
DRAWBAR GP
LINK GP

MOTOR GRADER 120H MOTOR GRADER 2AN
 120H Motor Grader 2AN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2544 120H 2AN   (1996)

HYDRAULIC SYSTEM

VALVE GP-SOLENOID
MANIFOLD GP-CONTROL
7T-6517 MANIFOLD GP-CONTROL
VALVE GP-SOLENOID
6T-8046 VALVE GP-SOLENOID
VALVE GP-SOLENOID
8T-8808 VALVE GP-SOLENOID
 

#SEBP25440460
 

8T-8808: VALVE GP-SOLENOID

8T-8808 VALVE GP-SOLENOID
S/N 2AN1-UP
PART OF 8X-7564 CONTROL GP-CENTERSHIFT LOCK, 142-8205 LOCK GP-CENTERSHIFT
i00124796 SEBP2544
8T8808 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-8500 [1] COIL AS  
2. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
3. 7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
4. 7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
5. 1S-9593 [2] STRAP-CABLE  
6. [1] CARTRIDGE AS  
7. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
8. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 3D-2824 [1] SEAL-O-RING  
10. 030-6121 [1] RING-BACKUP  
11. 7J-9108 [1] SEAL-O-RING  
12. 1H-1023 [1] SEAL-O-RING  
13. 5P-2199 [1] RING-BACKUP  
14. 7X-4776 [1] RING-BACKUP  
15. 4K-2039 [1] SEAL-O-RING  
 

#SEBP25440461
 

3Q-9210: BULLDOZER AR-LIFT

3Q-9210 BULLDOZER AR-LIFT
S/N 2AN1-UP
AN ATTACHMENT
i00664827 SEBP2544
3Q9210 BULLDOZER AR-LIFT Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6185 [8] PIN  
2. 8T-9378 [10] BOLT (3/8-16X4-IN)  
3. 7K-9348 [2] PIN  
4. 3Q-8469 [2] SHACKLE  
5. 3Q-8848 [27] CHAIN  
6. 3Q-8416 Y [1] CYLINDER GP-LIFT (BLADE)  
7. [1] PLATE AS  
  3G-5596 [1] LUG  
  9D-6164 [1] BOSS (3/8-16X1.44-IN)  
8. 3Q-9249 [2] LINK AS-UPPER  
  2K-4233 [2] BOSS  
  9D-6164 [2] BOSS (3/8-16X1.44-IN)  
9. [1] LINK AS-LOWER  
  2K-4233 [4] BOSS  
10. Y [1] BLADE GP  
12. 7X-0368 [12] BOLT (3/4-10X3-IN)  
13. 1B-4331 [12] NUT (3/4-10-THD)  
14. 5P-6652 [12] WASHER (20X44.5X6-MM THK)  
15. 2K-4973 [10] LOCKNUT (3/8-16-THD)  
16. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
17. 4K-0367 [18] NUT-FULL (5/8-11-THD)  
18. 6Y-5841 [2] EDGE-CUTTING  
19. 4T-6229 [2] BIT-END  
20. Y [1] CONTROL GP-BULLDOZER HYDRAULIC  
21. 4B-5281 [4] WASHER  
22. 2D-4867 [8] FITTING-GREASE (1/8-27 PTF)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440462
 

3Q-9211: BULLDOZER AR-LIFT & TILT

3Q-9211 BULLDOZER AR-LIFT & TILT
S/N 2AN82-UP
AN ATTACHMENT
i00664829 SEBP2544
3Q9211 BULLDOZER AR-LIFT & TILT Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6185 [8] PIN  
2. 8T-9378 [10] BOLT (3/8-16X4-IN)  
3. 7K-9348 [2] PIN  
4. 3Q-8469 [2] SHACKLE  
5. 3Q-8848 B CHAIN  
6. 3Q-8386 [2] PLATE-KEEPER  
7. 3Q-8422 [2] PLATE-SPACER  
8. 8T-9389 [18] BOLT (1/2-13X2.75-IN)  
9. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
10. Y [1] CYLINDER GP-TILT  
11. 8F-4102 [2] PLATE-SEAL  
12. 3Q-8427 [2] BOLT  
13. 3Q-8416 Y [1] CYLINDER GP-LIFT (BLADE)  
14. 3Q-8426 [2] SPACER (32.5X45X15-MM)  
15. [1] PLATE AS  
16. 3Q-9249 [2] LINK AS-UPPER  
17. [1] LINK AS-LOWER  
18. 3Q-8936 [1] PLATE AS-SWIVEL  
19. 3Q-8937 [1] BLADE AS  
20. 7X-0368 [12] BOLT (3/4-10X3-IN)  
21. 1B-4331 [12] NUT (3/4-10-THD)  
22. 5P-6652 [12] WASHER (20X44.5X6-MM THK)  
23. 5L-4027 [22] WASHER (1.52-MM THK)  
24. 2K-4973 [10] LOCKNUT (3/8-16-THD)  
25. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
26. 4K-0367 [18] NUT-FULL (5/8-11-THD)  
27. 6Y-5841 [2] EDGE-CUTTING  
28. 4T-6229 [2] BIT-END  
29. 3J-6575 [1] BEARING  
30. 2J-0851 [2] CAP-BEARING  
31. 8E-9211 [10] SHIM (0.8-MM THK)  
32. 3B-8485 [1] ELBOW  
33. 3B-4897 [20] WASHER (1.531X2.875X0.049-IN THK)  
34. 2D-4867 [8] FITTING-GREASE (1/8-27 PTF)  
36. 6F-5282 [4] BOLT (1/2-13X5.25-IN)  
37. 8T-9399 [4] BOLT (3/4-10X2.25-IN)  
38. 8T-4994 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. [1] PLATE  
40. 9D-6164 [1] BOSS (3/8-16X1.44-IN)  
   
  FY [1] CONTROL GP-BULLDOZER HYDRAULIC  
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440463
 

112-7486: CIRCLE GP

112-7486 CIRCLE GP
S/N 2AN118-UP
PART OF 2C-9645 BLADE AR
i01114284 SEBP2544
1127486 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-0503 [2] WASHER (45.25X76.2X6.35-MM THK)  
2. 2G-3219 B [5] SHIM (0.8-MM THK)  
3. 2G-3221 B [5] SHIM (1.6-MM THK)  
4. 2K-0419 B [4] WASHER (0.766X3.5X0.065-IN THK)  
5. 5D-6644 B [10] SHIM (0.762-MM THK)  
6. 5T-8366 [4] STRIP-WEAR  
7. 5T-8367 [1] STRIP-WEAR  
8. 8D-5949 [1] BAR-SPREADER  
9. 8W-1749 [10] PLATE  
10. 8W-5229 [1] GUARD  
11. 8W-5231 [1] GUARD  
12. 102-4139 [8] SPACER (18.85X26.67X78-MM THK)  
13. 112-5060 [1] BRACKET AS  
  104-8655 [1] BUSHING  
14. 112-5061 [1] BRACKET AS  
  104-8655 [1] BUSHING  
15. 153-3580 [1] SHAFT  
16. 105-2080 [4] BRACKET AS  
    (EACH INCLUDES)
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
17. 153-9360 Y [1] CIRCLE GP  
18. 2B-2673 [2] NUT-CASTLE (1-3/4-5-THD)  
19. 3B-5320 [2] PIN-COTTER  
20. 5P-8245 [30] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 6H-1717 [30] BOLT (1/2-13X1.125-IN)  
22. 7X-0334 [8] BOLT (1/2-13X5-IN)  
23. 7X-0452 [4] NUT-FULL (1-1/2-6-THD)  
24. 7X-0550 [8] WASHER-HARD (13.5X32X5-MM THK)  
25. 2C-9780 [1] BRACKET AS  
25A. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
25B. 9X-8881 [2] BOLT (5/8-11X2.25-IN)  
25C. 9X-8883 [2] BOLT (5/8-11X2.75-IN)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440464
 

153-9360: CIRCLE GP

153-9360 CIRCLE GP
S/N 2AN104-UP
PART OF 112-7486, 8X-1965 CIRCLE GP
i00947766 SEBP2544
1539360 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 2G-3971 [1] BRACKET AS  
3. 4D-4375 [2] LUG  
5. 5T-3889 [1] BRACE  
6. 5T-3890 [1] BRACE  
7. 6G-2946 [2] STOP  
9. 8D-9882 [2] BLOCK-FILLER  
10. 8D-9886 [1] BRACE  
11. 8D-9887 [1] BRACE  
13. 132-1340 [1] BRACE AS  
  2A-7089 [2] BUSHING  
14. 147-6143 [1] PLATE (LH)  
15. 147-6144 [1] PLATE (RH)  
16. 153-0185 [1] BEAM-BLADE  
17. 153-0187 [1] BEAM-BLADE  
18. 5T-4267 A [1] SEGMENT-CIRCLE  
    (4 TEETH - SERVICE REPAIR FOR WORN OR DAMAGED TEETH)
  A   NOT PART OF THIS GROUP
 

#SEBP25440465
 

8X-1965: CIRCLE GP

8X-1965 CIRCLE GP
S/N 2AN1-103
PART OF 2C-9645 BLADE AR
i00124874 SEBP2544
8X1965 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-4139 [8] SPACER (18.85X26.67X78-MM THK)  
2. 7X-0550 [8] WASHER-HARD (13.5X32X5-MM THK)  
3. 8W-4066 [1] BRACKET-RAIL  
4. 8W-4067 [1] BRACKET-RAIL  
5. 6G-2947 [1] SHAFT  
6. 5P-8245 [30] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [30] BOLT (1/2-13X1.125-IN)  
8. 8W-1749 [10] PLATE  
9. 1D-0503 [2] WASHER (45.25X76.2X6.35-MM THK)  
10. 3B-5320 [2] PIN-COTTER  
11. 2G-3221 B [5] SHIM (1.6-MM THK)  
12. 8W-5229 [1] GUARD  
13. 8W-5231 [1] GUARD  
14. 2B-2673 [2] NUT-CASTLE (1-3/4-5-THD)  
15. 8D-5949 [1] BAR-SPREADER  
16. 2K-0419 [4] WASHER (0.766X3.5X0.065-IN THK)  
17. 5D-6644 B [10] SHIM (0.762-MM THK)  
18. 5T-8367 [1] STRIP-WEAR  
19. 5T-8366 [4] STRIP-WEAR  
20. 7X-0452 [4] NUT-FULL (1-1/2-6-THD)  
21. 2G-3219 B [5] SHIM (0.8-MM THK)  
22. 7X-0334 [8] BOLT (1/2-13X5-IN)  
23. 105-2080 [4] BRACKET AS  
24. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
25. 2C-9780 [1] BRACKET AS  
  5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
  9X-8881 [2] BOLT (5/8-11X2.25-IN)  
  9X-8883 [2] BOLT (5/8-11X2.75-IN)  
29. 117-2863 [1] CIRCLE AS  
30. 2G-3971 [1] BRACKET AS  
31. 6G-2946 [2] STOP  
32. 8D-9887 [1] BRACE  
33. 8D-9886 [1] BRACE  
34. 8D-9882 [2] BLOCK-FILLER  
35. 5T-3889 [1] BRACE  
36. 5T-3890 [1] BRACE  
37. 6G-2949 [1] BRACE  
38. 4D-4375 [2] LUG  
  B   USE AS REQUIRED
 

#SEBP25440466
 

8X-1965: CIRCLE GP

8X-1965 CIRCLE GP
S/N 2AN104-UP
PART OF 2C-9645 BLADE AR
i01001977 SEBP2544
8X1965 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-4139 [8] SPACER (18.85X26.67X78-MM THK)  
2. 7X-0550 [8] WASHER-HARD (13.5X32X5-MM THK)  
3. 8W-4066 [1] BRACKET-RAIL  
4. 8W-4067 [1] BRACKET-RAIL  
5. 153-3580 C [1] SHAFT  
6. 5P-8245 [30] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [30] BOLT (1/2-13X1.125-IN)  
8. 8W-1749 [10] PLATE  
9. 1D-0503 [2] WASHER (45.25X76.2X6.35-MM THK)  
10. 3B-5320 [2] PIN-COTTER  
11. 2G-3221 B [5] SHIM (1.6-MM THK)  
12. 8W-5229 [1] GUARD  
13. 8W-5231 [1] GUARD  
14. 2B-2673 [2] NUT-CASTLE (1-3/4-5-THD)  
15. 8D-5949 [1] BAR-SPREADER  
16. 2K-0419 [4] WASHER (0.766X3.5X0.065-IN THK)  
17. 5D-6644 B [10] SHIM (0.762-MM THK)  
18. 5T-8367 [1] STRIP-WEAR  
19. 5T-8366 [4] STRIP-WEAR  
20. 7X-0452 [4] NUT-FULL (1-1/2-6-THD)  
21. 2G-3219 B [5] SHIM (0.8-MM THK)  
22. 7X-0334 [8] BOLT (1/2-13X5-IN)  
23. 105-2080 [4] BRACKET AS  
24. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
25. 2C-9780 [1] BRACKET AS  
26. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
27. 9X-8881 [2] BOLT (5/8-11X2.25-IN)  
28. 9X-8883 [2] BOLT (5/8-11X2.75-IN)  
29. 153-9360 CY [1] CIRCLE GP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440467
 

2C-9554: DRAWBAR GP

2C-9554 DRAWBAR GP
S/N 2AN1-UP
PART OF 2C-9645 BLADE AR
i00124581 SEBP2544
2C9554 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1322 [4] BOLT (7/8-9X6-IN)  
2. 6G-1915 B [24] SHIM (0.25-MM THK)  
3. 5P-6652 [12] WASHER (20X44.5X6-MM THK)  
  3B-6753 [12] BOLT (3/4-10X4.75-IN)  
4. 6G-5442 [1] BALL  
5. 8X-8406 [1] CAP  
6. 8X-8409 B [4] SHIM (0.8-MM THK)  
7. 8X-8408 B [6] SHIM (0.25-MM THK)  
8. 8X-8407 [1] ADAPTER  
9. 5P-8291 [5] BOLT (3/4-16X2-IN)  
10. 2H-3764 [2] BOLT-SOCKET HEAD (1/4-20X1.5-IN)  
11. 9H-1031 [4] WASHER-HARD (24X41.5X6-MM THK)  
12. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
13. 6G-4526 [4] SHOE-CIRCLE GUIDE  
14. 4B-3604 [8] SETSCREW-SQUARE HEAD (3/4-10X2.5-IN)  
15. 1D-5119 [8] NUT (3/4-10-THD)  
16. 6G-1914 B [28] SHIM (0.76-MM THK)  
17. 128-9654 [9] STRIP-WEAR  
18. 128-9656 [4] STRIP-WEAR  
19. 2C-9558 [1] DRAWBAR & YOKE AS  
20. 8X-7956 [1] SHAFT AS  
21. 8F-9836 [5] BOSS (3/8-16-THD)  
22. 5D-2643 [1] LUG  
23. 153-7383 B [1] SHIM (0.12-MM THK)  
  B   USE AS REQUIRED
 

#SEBP25440468
 

8X-2373: DRAWBAR GP

8X-2373 DRAWBAR GP
S/N 2AN1-UP
PART OF 2C-9614 SCARIFIER AR
AN ATTACHMENT
i00124880 SEBP2544
8X2373 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1322 [4] BOLT (7/8-9X6-IN)  
2. 6G-1915 B [24] SHIM (0.25-MM THK)  
3. 5P-6652 [12] WASHER (20X44.5X6-MM THK)  
  3B-6753 [12] BOLT (3/4-10X4.75-IN)  
4. 6G-5442 [1] BALL  
5. 8X-8406 [1] CAP  
6. 8X-8409 B [4] SHIM (0.8-MM THK)  
7. 8X-8408 B [6] SHIM (0.25-MM THK)  
  153-7383 B [1] SHIM (0.12-MM THK)  
8. 8X-8407 [1] ADAPTER  
9. 5P-8291 [5] BOLT (3/4-16X2-IN)  
10. 2H-3764 [2] BOLT-SOCKET HEAD (1/4-20X1.5-IN)  
11. 9H-1031 [4] WASHER-HARD (24X41.5X6-MM THK)  
12. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
13. 6G-4526 [4] SHOE-CIRCLE GUIDE  
14. 4B-3604 [8] SETSCREW-SQUARE HEAD (3/4-10X2.5-IN)  
15. 1D-5119 [8] NUT (3/4-10-THD)  
16. 6G-1914 B [28] SHIM (0.76-MM THK)  
17. 128-9654 [9] STRIP-WEAR  
18. 128-9656 [4] STRIP-WEAR  
19. 8X-4266 [1] DRAWBAR & YOKE AS  
20. 8X-7956 [1] SHAFT AS  
21. 8F-9836 [5] BOSS (3/8-16-THD)  
22. 5D-2643 [1] LUG  
23. 8X-2694 [3] STUD-BALL  
  B   USE AS REQUIRED
 

#SEBP25440469
 

113-0997: LINK GP-LOWER

113-0997 LINK GP-LOWER
S/N 2AN1-UP
PART OF 113-1005 RIPPER GP
i00125020 SEBP2544
1130997 LINK GP-LOWER Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-0998 [1] LINK AS  
2. 3G-0472 [4] BEARING  
3. 7K-9203 [8] SEAL-LIP TYPE  
 

Information:

Technical Information Bulletin
Solenoid For The Centershift On Motor Graders{5479}
Solenoid For The Centershift On Motor Graders{5479}
Specifications
Solenoid Valve (Centershift Lock)
120H Motor Grader Hydraulic and Steering System
Disassembly and Assembly
Centershift Lock Control Valve
120H & 135H MOTOR GRADERS MACHINE SYSTEM
Service Magazine
New Solenoid Valve Group For Transmission Selector Valve Group Has Improved Coil For Reliability And Longer Service Life {5066,5479}
1997/07/21
Installation Of Control Valves For Implements {5051,5136,5214,5220,5226,5351,5115,5207,5266,5063}
1998/06/01
A New Coil Assembly is Now Used {5479}
2009/02/09

Caterpillar Parts SIS Catalog 120H :

VALVE GP-SOLENOID
6T-8046 VALVE GP-SOLENOID
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
VALVE GP-RELIEF
6E-4704 VALVE GP-RELIEF
VALVE GP-RELIEF
6E-4703 VALVE GP-RELIEF
6E-3033 VALVE GP-RELIEF
VALVE GP-RELIEF
4T-4935 VALVE GP-RELIEF
VALVE GP-RELIEF
139-8473 VALVE GP-RELIEF
VALVE GP-RELIEF
106-7390 VALVE GP-RELIEF
BULLDOZER AR-LIFT
3Q-9210 BULLDOZER AR-LIFT
BULLDOZER AR-LIFT & TILT
3Q-9211 BULLDOZER AR-LIFT & TILT
CIRCLE GP
112-7486 CIRCLE GP
CIRCLE GP
153-9360 CIRCLE GP
CIRCLE GP
8X-1965 CIRCLE GP
CIRCLE GP
8X-1965 CIRCLE GP
DRAWBAR GP
2C-9554 DRAWBAR GP
DRAWBAR GP
8X-2373 DRAWBAR GP

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.