AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

129-8215 CONTROL GP-CLUTCH S/N 2AN110-UP PART OF 2C-9623 CHASSIS AR Type 2 120H MOTOR GRADER


OPERATOR STATION
CONTROL GP
CONTROL GP-STEERING
DOOR GP

MOTOR GRADER 120H MOTOR GRADER 2AN
 120H Motor Grader 2AN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2544 120H 2AN   (1996)

OPERATOR STATION

CONTROL GP
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
8W-5618 CONTROL GP-CLUTCH
 

#SEBP25440490
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 2AN110-UP
PART OF 2C-9623 CHASSIS AR
Type 2
i01429144 SEBP2544
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25440491
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 2AN110-UP
PART OF 2C-9623 CHASSIS AR
Type 3
i01757845 SEBP2544
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 207-4922 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 [1] ROD  
18. 4J-8922 [1] ROD END (3/8-24-THD)  
19. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25440492
 

8W-5618: CONTROL GP-CLUTCH

8W-5618 CONTROL GP-CLUTCH
S/N 2AN1-59
INCHING PEDAL
PART OF 2C-9623 CHASSIS AR
i00124814 SEBP2544
8W5618 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 8G-7629 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3K-8280 [1] PIN-CLEVIS  
22. 7V-0446 [2] CLIP  
23. 9X-5694 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [2] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [3] NUT (5/8-18-THD)  
29. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
30. 3D-4004 [1] SEAL-QUAD RING  
31. 133-9185 [1] ADAPTER  
32. 7M-8485 [1] SEAL-O-RING  
33. 7D-9212 [1] SPRING  
34. 6P-5442 [2] PLUG  
35. 133-9186 [1] COUPLER  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 8X-7665 [1] BRACKET  
40. 1D-1313 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
43. 1B-2578 [1] NUT (3/8-16-THD)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 6J-1889 [1] SEAL-U-CUP  
 

#SEBP25440493
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 2AN1-UP
PART OF 2C-9623 CHASSIS AR
i00124760 SEBP2544
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-1501 Y [1] PUMP GP-METERING (HMU)  
2. 092-3200 [1] STEERING WHEEL  
3. 7I-4700 [1] NUT  
4. 6V-7692 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440494
 

2C-9691: DOOR GP-CAB

2C-9691 DOOR GP-CAB -LOW PROFILE-RH
S/N 2AN82-UP
PART OF 8X-4527 DOOR GP-CAB
i00659765 SEBP2544
2C9691 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-2737 [1] DOOR AS (RH)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 8X-4446 [1] GLASS  
3. 107-9641 [1] PLATE AS  
4. 8T-4181 M [6] BOLT (M6X1X20-MM)  
5. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
6. 8Y-4400 [1] LATCH AS-DOOR  
7. 6V-7636 [4] PIN AS-SPRING  
8. 8Y-4398 [1] LINK-CONNECTING  
9. 9X-2546 M [4] BOLT (M6X1X20-MM)  
10. 8Y-4401 [1] HANDLE AS (INSIDE)  
11. 8X-4243 [1] COVER (RH)  
12. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 8X-4262 [1] COVER (RH)  
14. 8X-4245 M [1] BOSS (M6X1X18-MM)  
15. 8Y-4620 [1] LINK-CONNECTING  
16. 1H-3338 [1] LOCKWASHER  
17. 5T-7486 [1] RETAINER-SPRING  
18. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
19. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
20. 8X-4448 [1] GLASS  
21. 8X-4066 [1] HINGE  
22. 6D-6581 [14] RIVET-POP  
23. 199-2712 [1] HANDLE (HANDHOLD)  
24. 5P-5768 BD SEAL  
25. 108-5950 [1] LATCH AS  
26. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 199-2677 [1] LINK (RELEASE)  
29. 108-5952 [1] LINK (RH)  
30. 128-0037 [1] KNOB-BALL  
31. 114-9190 [1] SEAL  
32. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
33. 140-5485 [2] PLUG  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP25440495
 

2C-9692: DOOR GP-CAB

2C-9692 DOOR GP-CAB -LOW PROFILE-LH
S/N 2AN82-UP
PART OF 8X-4527 DOOR GP-CAB
i00660324 SEBP2544
2C9692 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-2738 [1] DOOR AS (LH)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 8X-4446 [1] GLASS  
3. 107-9641 [1] PLATE AS  
4. 8T-4181 M [6] BOLT (M6X1X20-MM)  
5. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
6. 8Y-4399 [1] LATCH AS-DOOR  
7. 6V-7636 [4] PIN AS-SPRING  
8. 8Y-4398 [1] LINK-CONNECTING  
9. 9X-2546 M [4] BOLT (M6X1X20-MM)  
10. 8Y-4401 [1] HANDLE AS (INSIDE)  
11. 8X-4244 [1] COVER (LH)  
12. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 8X-4263 [1] COVER (LH)  
14. 8X-4245 M [1] BOSS (M6X1X18-MM)  
15. 8Y-4620 [1] LINK-CONNECTING  
16. 1H-3338 [1] LOCKWASHER  
17. 5T-7486 [1] RETAINER-SPRING  
18. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
19. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
20. 8X-4448 [1] GLASS  
21. 8X-4066 [1] HINGE  
22. 6D-6581 [14] RIVET-POP  
23. 199-2712 [1] HANDLE (HANDHOLD)  
24. 5P-5768 BD SEAL  
25. 108-5949 [1] LATCH AS (LH)  
26. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 199-2677 [1] LINK (RELEASE)  
29. 108-5951 [1] LINK (LH)  
30. 128-0037 [1] KNOB-BALL  
31. 114-9190 [1] SEAL  
32. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
33. 140-5485 [2] PLUG  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP25440496
 

8X-4525: DOOR GP-CAB

8X-4525 DOOR GP-CAB
S/N 2AN1-81
RH
PART OF 8X-4527 DOOR GP-CAB
i00124892 SEBP2544
8X4525 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-2677 [1] LINK (RELEASE)  
2. 1H-3338 [1] LOCKWASHER  
3. 5T-7486 [1] RETAINER-SPRING  
4. 6D-6581 [14] RIVET-POP  
5. 6V-2773 [2] PLUG  
6. 6V-7636 [4] PIN AS-SPRING  
7. 8X-4066 [1] HINGE  
8. 8X-4243 [1] COVER (RH)  
9. 8X-4262 [1] COVER (RH)  
10. 8X-4446 [1] GLASS (HIGH PROFILE)  
11. 8X-4448 [1] GLASS  
12. 8Y-4398 [1] LINK-CONNECTING  
13. 8Y-4400 [1] LATCH AS-DOOR  
14. 8Y-4401 [1] HANDLE AS (INSIDE)  
15. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
16. 8Y-4620 [1] LINK-CONNECTING  
17. 8Y-4801 J [1] LOCK AS-CYLINDER  
18. 9X-2546 M [4] BOLT (M6X1X20-MM)  
19. 107-9641 [1] PLATE AS  
20. 108-5950 [1] LATCH AS  
21. 108-5952 [1] LINK (RH)  
22. 114-9190 [1] SEAL  
23. 128-0037 [1] KNOB-BALL (RH DOOR)  
24. 199-2712 [1] HANDLE (RH)  
25. 199-2737 [1] DOOR AS (RH)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
28. 8T-4181 M [10] BOLT (M6X1X20-MM)  
29. 8X-4245 M [1] BOSS (M6X1X18-MM)(M6X18MM)  
30. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
31. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
32. 069-5688 D SEAL (2.7M)  
32A. 069-5688 D SEAL (2.4M)  
  D   ORDER BY THE METER
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
 

#SEBP25440497
 

8X-4526: DOOR GP-CAB

8X-4526 DOOR GP-CAB
S/N 2AN1-81
LH
PART OF 8X-4527 DOOR GP-CAB
i00124893 SEBP2544
8X4526 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-2677 [1] LINK (RELEASE)  
2. 1H-3338 [1] LOCKWASHER  
3. 5T-7486 [1] RETAINER-SPRING  
4. 6D-6581 [14] RIVET-POP  
5. 6V-2773 [2] PLUG  
6. 6V-7636 [4] PIN AS-SPRING  
7. 8X-4066 [1] HINGE  
8. 8X-4244 [1] COVER (LH)  
9. 8X-4263 [1] COVER (LH)  
10. 8X-4446 [1] GLASS (UPPER)  
11. 8X-4448 [1] GLASS (LOWER)  
12. 8Y-4398 [1] LINK-CONNECTING  
13. 8Y-4399 [1] LATCH AS-DOOR  
14. 8Y-4401 [1] HANDLE AS (INSIDE)  
15. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
16. 8Y-4620 [1] LINK-CONNECTING  
17. 8Y-4801 J [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
18. 9X-2546 M [4] BOLT (M6X1X20-MM)  
19. 107-9641 [1] PLATE AS  
20. 108-5949 [1] LATCH AS (LH)  
21. 108-5951 [1] LINK (LH)  
22. 114-9190 [1] SEAL  
23. 128-0037 [1] KNOB-BALL  
24. 199-2712 [1] HANDLE (GRAB)  
25. 199-2738 [1] DOOR AS (LH)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
28. 8T-4181 M [6] BOLT (M6X1X20-MM)  
29. 8X-4245 M [1] BOSS (M6X1X18-MM)  
30. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
31. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
32. 069-5688 D SEAL (2.4-M)  
32A. 069-5688 D SEAL (2.8-M)  
33. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  D   ORDER BY THE METER
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
 

#SEBP25440498
 

8X-4527: DOOR GP-CAB

8X-4527 DOOR GP-CAB
S/N 2AN1-81
PART OF 8X-2241 ROPS GP
i00124894 SEBP2544
8X4527 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-4526 Y [1] DOOR GP-CAB (LH)(LH)  
2. 8X-4525 Y [1] DOOR GP-CAB (RH)(RH)  
3. 138-4054 M [5] SCREW-FLAT HEAD (M6X1X45-MM)  
4. 129-3178 M [28] LOCKNUT (M6X1-THD)  
5. 9X-8256 [28] WASHER (6.6X12X2-MM THK)  
6. 6V-5163 BD SEAL  
7. 124-8843 [2] PLATE AS  
8. 4J-3915 B [8] SHIM (1.52-MM THK)  
9. 6V-5158 [2] STRIKER AS-BODY  
10. 154-8290 [1] SEAL (LH)  
11. 8C-8454 M [23] SCREW-MACHINE (M6X1X20-MM)  
12. 107-6813 [2] PLATE AS  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
15. 8T-4133 M [4] NUT (M10X1.5-THD)  
16. 106-6553 [4] BUMPER-CONICAL  
17. 5P-5969 BD SEAL  
18. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
19. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
21. 126-4966 [2] PLATE  
22. 154-8291 [1] SEAL (RH)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25440499
 

8X-4527: DOOR GP-CAB

8X-4527 DOOR GP-CAB
S/N 2AN82-UP
PART OF 8X-2241 ROPS GP
i00654869 SEBP2544
8X4527 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2C-9692 CY [1] DOOR GP-CAB  
2. 2C-9691 CY [1] DOOR GP-CAB (RH)  
3. 138-4054 CM [5] SCREW-FLAT HEAD (M6X1X45-MM)  
4. 129-3178 CM [28] LOCKNUT (M6X1-THD)  
5. 9X-8256 C [28] WASHER (6.6X12X2-MM THK)  
6. 122-2228 BE SEAL  
7. 124-8843 [2] PLATE AS  
8. 4J-3915 B [8] SHIM (1.52-MM THK)  
9. 6V-5158 [2] STRIKER AS-BODY  
11. 8C-8454 CM [23] SCREW-MACHINE (M6X1X20-MM)  
12. 107-6813 [2] PLATE AS  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
15. 8T-4133 M [4] NUT (M10X1.5-THD)  
16. 106-6553 [4] BUMPER-CONICAL  
17. 5P-5969 BD SEAL  
18. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
19. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
21. 126-4966 [2] PLATE  
22. 178-8894 BE SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Service Letter-NACD
Product Support Program For Installing A New Inching Cable On Certain 12H, 120H, 135H, 140H, 143H, 160H, And 163H Motor Graders
Product Support Program For Installing A New Inching Cable On Certain 12H, 120H, 135H, 140H, 143H, 160H, And 163H Motor Graders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Brake And Inching Pedal Control Linkage
Brake And Inching Pedal Control Linkage
Specifications
Control Clutch Group<BR> 8W-5618
120H AUSTRALIAN VERSION MOTOR GRADER POWER TRAIN
Service Letter-China
Product Support Program For Installing A New Inching Cable On Certain 12H, 120H, 135H, 140H, 143H, 160H, And 163H Motor Graders
Product Support Program For Installing A New Inching Cable On Certain 12H, 120H, 135H, 140H, 143H, 160H, And 163H Motor Graders
Service Letter-Asia
Service Letter-APD

Caterpillar Parts SIS Catalog 120H :

CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-BULLDOZER HYDRAULIC
3Q-9265 CONTROL GP-BULLDOZER HYDRAULIC
CONTROL GP-BULLDOZER HYDRAULIC
3Q-9265 CONTROL GP-BULLDOZER HYDRAULIC
CONTROL GP-BULLDOZER HYDRAULIC
3Q-9264 CONTROL GP-BULLDOZER HYDRAULIC
CONTROL GP-BULLDOZER HYDRAULIC
3Q-9264 CONTROL GP-BULLDOZER HYDRAULIC
CONTROL GP-BULLDOZER HYDRAULIC
3Q-9264 CONTROL GP-BULLDOZER HYDRAULIC
167-0287 CONTROL GP-BULLDOZER HYDRAULIC
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
8W-5618 CONTROL GP-CLUTCH
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
DOOR GP-CAB
2C-9691 DOOR GP-CAB
DOOR GP-CAB
2C-9692 DOOR GP-CAB
DOOR GP-CAB
8X-4525 DOOR GP-CAB
DOOR GP-CAB
8X-4526 DOOR GP-CAB
DOOR GP-CAB
8X-4527 DOOR GP-CAB

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.