AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

155-5110 PUMP GP-PISTON S/N 1WR2947-8115 FOR FIELD REPLACEMENT ORDER ONE EACH OF 1605541 PLATE AS AND 1616634 PUMP GP AND EITHER 1604884 TUBE AS FOR ATTACHMENT, SOUND ARRANGEMENT OR 1629636 TUBE AS FOR STANDARD SOUND ARRANGEMENT PART OF 147-6210, 147-6213, 153-6353 ENGINE AR AN ATTACHMENT 416C


HYDRAULIC SYSTEM
PUMP GP
TANK GP
VALVE GP-CONTROL
VALVE GP-SOLENOID
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
HYDRAULIC SYSTEM
VALVE GP-BANK

BACKHOE LOADER 416C BACKHOE LOADER 1WR
 416C Backhoe Loader Center Pivot, Parallel Lift 1WR00001-08115 (MACHINE) POWERED BY 3054 Engine SEBP2549 416C 1WR   (1996)

HYDRAULIC SYSTEM

PUMP GP
DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
PUMP GP-PISTON
112-6564 PUMP GP-PISTON
PUMP GP-PISTON
155-5109 PUMP GP-PISTON
PUMP GP-PISTON
155-5110 PUMP GP-PISTON
ROTATING GP-PUMP
120-5726 ROTATING GP-PUMP
ROTATING GP-PUMP
6E-4006 ROTATING GP-PUMP
SHAFT GP-PUMP DRIVE
128-5596 SHAFT GP-PUMP DRIVE
VALVE GP-PUMP CONTROL
135-6616 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
347-0612 VALVE GP-PUMP CONTROL
 

#SEBP25490460
 

155-5110: PUMP GP-PISTON

155-5110 PUMP GP-PISTON
S/N 1WR2947-8115
FOR FIELD REPLACEMENT ORDER ONE EACH OF 1605541 PLATE AS AND 1616634 PUMP GP AND EITHER 1604884 TUBE AS FOR ATTACHMENT, SOUND ARRANGEMENT OR 1629636 TUBE AS FOR STANDARD SOUND ARRANGEMENT
PART OF 147-6210, 147-6213, 153-6353 ENGINE AR
AN ATTACHMENT
i00739971 SEBP2549
1555110 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3343 [1] RING  
2. 6E-4003 [2] BEARING  
3. 135-6614 [1] HOUSING-PUMP  
4. 120-5726 Y [1] ROTATING GP-PUMP  
5. 3E-6769 [4] SEAL-O-RING  
6. 095-9805 M [4] BOLT-SOCKET HEAD (M14X2X40-MM)  
7. 1P-6872 [1] CUP-BEARING  
8. 8C-7110 [1] CONE-BEARING  
9. 6E-2943 [1] PLUG  
10. 6E-4000 [1] SPACER (25.5X35X3-MM THK)  
11. 3E-6770 [1] SEAL-O-RING  
12. 120-5732 [1] GUIDE-PLUNGER  
13. 6E-6176 [1] SPRING  
14. 120-5730 [1] PLUNGER  
15. 9S-8006 [1] PLUG (7/8-14-THD)  
16. 2M-9780 [1] SEAL-O-RING  
17. 162-1604 [1] SHAFT-DRIVE  
18. 6V-2323 [1] CONE-BEARING  
19. 3B-5790 [1] CUP-BEARING  
20. 6E-4004 [2] SEAL-SHAFT  
21. 121-3042 [1] SWASHPLATE AS  
22. 120-5727 [1] PISTON-CONTROL  
23. 120-5729 [1] GUIDE-PISTON  
24. 136-8423 [1] PLUG-BREAK OFF  
25. 083-4419 [1] PIN  
26. 120-5723 [1] PLUG-BREAK OFF  
27. 120-5722 [1] HEAD-PUMP  
28. 103-5522 [1] ADAPTER AS  
  3J-7354 [3] SEAL-O-RING  
29. 030-7946 [2] ELBOW  
30. 3J-7354 [4] SEAL-O-RING  
31. 135-6615 [1] TUBE AS  
32. 162-1605 [1] VALVE GP-PUMP CONTROL (POWER COMPENSATOR)  
33. 8T-8442 M [7] BOLT-SOCKET HEAD (M6X1X30-MM)  
34. 107-3116 [1] SEAL-O-RING  
35. 120-5733 [1] SPRING  
36. 155-5113 [1] ACTUATOR GP-PUMP  
37. 135-6616 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
38. 9X-7680 [3] SEAL-O-RING  
39. 9S-8002 [1] PLUG (7/16-20-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25490461
 

120-5726: ROTATING GP-PUMP

120-5726 ROTATING GP-PUMP
S/N 1WR1-8115
PART OF 112-6564, 155-5109, 155-5110 PUMP GP-PISTON
FIELD REPLACEMENT ORDER @@@@@ 6E-4006@@@@@
ALSO AN ATTACHMENT
i00200924 SEBP2549
1205726 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-5767 [9] PISTON AS  
2. 6E-6154 [1] PLATE-RETRACTION  
3. 6E-6155 [1] BEARING  
4. 196-0226 [1] BARREL  
5. 6E-3341 [1] SEAT-SPRING  
6. 6E-4009 [1] SPRING  
7. 6E-6158 [1] RING  
8. 120-5724 [1] PLATE-VALVE  
9. 168-3379 [3] PIN  
 

#SEBP25490462
 

6E-4006: ROTATING GP-PUMP

6E-4006 ROTATING GP-PUMP
S/N 1WR1-8115
FIELD REPLACEMENT FOR @@@@@120-5726@@@@@
i02888364 SEBP2549
6E4006 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-5767 [9] PISTON AS  
2. 6E-6154 [1] PLATE-RETRACTION  
3. 6E-6155 [1] BEARING  
4. 196-0226 [1] BARREL  
5. 6E-3341 [1] SEAT-SPRING  
6. 6E-4009 [1] SPRING  
7. 6E-6158 [1] RING  
8. 120-5724 [1] PLATE-VALVE  
9. 168-3379 [3] PIN  
 

#SEBP25490463
 

128-5596: SHAFT GP-PUMP DRIVE

128-5596 SHAFT GP-PUMP DRIVE
S/N 1WR1-8115
PART OF 112-1826 DRIVE & MTG GP-PUMP
i00200993 SEBP2549
1285596 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-8150 [1] RING-RETAINING  
 

#SEBP25490464
 

106-6252: TANK & MTG GP-HYDRAULIC

106-6252 TANK & MTG GP-HYDRAULIC
S/N 1WR1-8115
PART OF 120-9572, 143-1794 HYDRAULIC AR
i00698086 SEBP2549
1066252 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4278 [3] CLAMP-HOSE  
2. 160-2245 BG SLEEVE-ABRASION  
3. 5D-1026 [6] CLAMP-BAND  
4. 5V-9155 [2] CLAMP-HOSE  
5. 7K-1181 [1] STRAP-CABLE  
6. 9M-0164 [2] CLAMP-HOSE  
7. 9R-9925 [1] FILTER ELEMENT-BREATHER  
8. 112-5369 [1] BRACKET AS  
  7T-1099 [2] LINK  
9. 119-7749 [1] HOSE  
10. 120-9926 [2] CLAMP  
11. 122-0051 Y [1] TANK GP-HYDRAULIC  
12. 122-1160 [1] GAUGE AS-LIQUID LEVEL  
  7X-4782 [1] SEAL-O-RING  
  136-7876 [1] GLASS  
  136-8059 [1] RING-RETAINING  
13. 123-0867 [1] CAP-FILLER (HYDRAULIC OIL)  
14. 151-8753 [1] TUBE  
15. 139-4068 [1] TUBE  
16. 140-9451 [1] TUBE AS  
17. 163-1491 [1] TANK-EXPANSION  
18. 061-8844 [1] GROMMET  
19. 3F-1240 [1] GROMMET  
20. 5C-7261 M [1] NUT (M8X1.25-THD)  
21. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4179 M [4] BOLT (M12X1.75X20-MM)  
23. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
25. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
28. 9X-2125 M [3] BOLT-LOCKING (M10X1.5X25-MM)  
29. 5P-1695 E HOSE (54-CM)  
30. 5P-1442 E HOSE (33-CM)  
30A. 5P-1442 E HOSE (21-CM)  
32. 5P-1505 E HOSE (36-CM)  
32A. 5P-1505 E HOSE (94-CM)  
32B. 5P-1505 E HOSE (26-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25490465
 

122-0051: TANK GP-HYDRAULIC

122-0051 TANK GP-HYDRAULIC
S/N 1WR1-8115
PART OF 106-6252 TANK & MTG GP-HYDRAULIC
i00200974 SEBP2549
1220051 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-5364 [1] PLATE AS  
2. 112-5371 [1] TANK AS-HYDRAULIC  
3. 124-0152 [1] SCREEN  
4. 132-3056 [1] SEAL-O-RING  
5. 2M-9780 [1] SEAL-O-RING  
5A. 122-1113 [1] TEE-O-RING  
6. 099-2374 M [6] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
7. 129-3178 M [3] LOCKNUT (M6X1-THD)  
8. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP25490466
 

133-8912: VALVE & MTG GP-COUPLER

133-8912 VALVE & MTG GP-COUPLER
S/N 1WR1-8115
PART OF 119-4118 LINES GP-COUPLER
AN ATTACHMENT
i00202172 SEBP2549
1338912 VALVE & MTG GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8911 [1] MANIFOLD  
2. 2K-8199 [2] SEAL-O-RING  
3. 126-1084 [2] BRACKET-MOUNTING  
4. 131-5441 [2] PLUG  
5. 2M-9780 [1] SEAL-O-RING  
6. 127-9173 Y [1] VALVE GP-SOLENOID  
7. 6V-8189 [6] NUT (5/16-18-THD)  
8. 082-1567 [3] TIE ROD  
9. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
10. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
11. 131-8630 Y [2] VALVE GP-SOLENOID  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25490467
 

138-1979: VALVE & MTG GP-SOLENOID

138-1979 VALVE & MTG GP-SOLENOID
S/N 1WR1-8115
PART OF 138-9796, 148-2301 LINES GP-COUPLER
AN ATTACHMENT
i00579534 SEBP2549
1381979 VALVE & MTG GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-1978 Y [1] VALVE GP-SOLENOID (12-VOLT)  
2. 138-2122 [1] MANIFOLD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25490468
 

141-7885: VALVE GP-BACKHOE NEUTRALIZER

141-7885 VALVE GP-BACKHOE NEUTRALIZER
S/N 1WR1-8115
AN ATTACHMENT
i00745645 SEBP2549
1417885 VALVE GP-BACKHOE NEUTRALIZER Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 117-3235 I [1] HOSE AS  
3. 130-6584 [1] SWITCH AS-ROCKER (HYDRAULIC LOCKOUT)  
  111-7899 [1] GASKET  
4. 138-1976 Y [1] VALVE GP-SHUTOFF  
5. 141-7533 [1] TUBE AS  
6. 141-9474 [1] HARNESS AS-CONSOLE  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
7. 153-2785 [1] HARNESS AS-CONSOLE (HYDRAULIC LOCKOUT)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  8L-8413 [2] STRAP-CABLE (WHITE)  
  111-7898 [1] CONNECTOR (8-PIN)  
  112-9611 [4] TERMINAL-BLADE (18-GA TO 20-GA)  
8. 5K-9090 [1] SEAL-O-RING  
8A. 6V-9008 [1] ELBOW  
8B. 7M-8485 [1] SEAL-O-RING  
9. 7M-8485 [2] SEAL-O-RING  
9A. 113-4676 [2] CONNECTOR  
10. 6V-9746 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP25490469
 

114-0048: VALVE GP-BANK 2

114-0048 VALVE GP-BANK 2
S/N 1WR1-8115
PART OF 119-8176, 119-8177 HYDRAULIC AR
AN ATTACHMENT
i00202121 SEBP2549
1140048 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-1635 Y [1] VALVE GP-PRIORITY (INLET)  
2. 130-6520 Y [1] VALVE GP-CONTROL (LIFT)(LIFT)  
3. 124-8819 Y [1] VALVE GP-CONTROL (TILT)  
4. 4T-7862 [1] COVER  
5. 4T-4538 [3] STUD (3/8-16-THD)  
6. 6V-8801 [3] NUT (3/8-16-THD)  
7. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 4T-2723 B [9] SHIM (0.076-MM THK)  
9. 4D-9986 [6] SEAL-O-RING  
10. 4J-5267 [3] SEAL-O-RING  
11. 4J-5140 [3] SEAL-O-RING  
12. 9S-8008 [1] PLUG (1-1/16-12-THD)  
13. 3D-2824 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Drive Shaft Spline - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Technical Information Bulletin
Oil Leakage Occurs After Adjusting Pump Screws
Oil Leakage Occurs After Adjusting Pump Screws
Engine Stalling Due To Operating Technique
Engine Stalling Due To Operating Technique
Mechanical Control Vibration Level Reduction
Mechanical Control Vibration Level Reduction
Specifications
Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Service Letter-Asia
Systems Operation
Signal Resolver Network
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Service Letter-APD
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Testing and Adjusting
Hydraulic Pump - Test and Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Engine, Torque Converter, Transmission & Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Implement Pump
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Improved Hydraulic Tube Assembly Increases Service Life {5057,5056,5070}
1997/05/05
New End Cover For Control Valve Group Can Be Used With Or Without Additional Hydraulic Circuits (Power Beyond) {5051}
1997/11/17
Proper Assembly Of Elbow And O-Ring Seal For The Piston Pump Group{5055}
1998/01/19
Correction To Proper Assembly Of Elbow And O-Ring Seal For The Piston Pump Group {5055}
1998/03/30
New Pumps For C-Series Backhoe Loaders{5070}
1998/05/04
Backhoe Loader Window Latch Rod Now Serviceable{7308}
1999/06/01
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
New Accelerator Control Alleviates Pump Cavitation {1265, 1276, 5055, 5070, 5073}
2000/04/17
Correction to Testing and Adjusting for the Test of the Torque Limiter {5070}
2001/04/23
Correction to Testing and Adjusting, SENR1272 for the High Pressure Stall Test {5070}
2001/05/14
Correction to Testing and Adjusting , "Hydraulic Pump - Test and Adjust" {5070}
2002/10/21
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 416C :

PUMP GP-PISTON
155-5109 PUMP GP-PISTON
PUMP GP-PISTON
112-6564 PUMP GP-PISTON
MOUNTING GP-CYLINDER
9R-4668 MOUNTING GP-CYLINDER
MOUNTING GP-BANK VALVE
122-9136 MOUNTING GP-BANK VALVE
LINES GP-TILT CYLINDER
135-3495 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
112-6401 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
112-1853 LINES GP-TILT CYLINDER
LINES GP-SWING
106-6250 LINES GP-SWING
ROTATING GP-PUMP
120-5726 ROTATING GP-PUMP
ROTATING GP-PUMP
6E-4006 ROTATING GP-PUMP
SHAFT GP-PUMP DRIVE
128-5596 SHAFT GP-PUMP DRIVE
TANK & MTG GP-HYDRAULIC
106-6252 TANK & MTG GP-HYDRAULIC
TANK GP-HYDRAULIC
122-0051 TANK GP-HYDRAULIC
VALVE & MTG GP-COUPLER
133-8912 VALVE & MTG GP-COUPLER
VALVE & MTG GP-SOLENOID
138-1979 VALVE & MTG GP-SOLENOID
VALVE GP-BACKHOE NEUTRALIZER
141-7885 VALVE GP-BACKHOE NEUTRALIZER

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.