FUEL SYSTEM
SEPARATOR GP-WATERTANK GP-FUEL
BASIC ENGINE
PULLEY GPELECTRICAL AND STARTING SYSTEM
BATTERY GPFUEL SYSTEM
SEPARATOR GP-WATER
#SEBP25500200
7E-4636: SEPARATOR GP-WATER
7E-4636 SEPARATOR GP-WATER
S/N 1XR1-2183
PART OF 143-1311, 7E-4629 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
S/N 1XR1-2183
PART OF 143-1311, 7E-4629 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 130-7092 Y | [1] | FILTER GP-WATER SEP & FUEL | |
| 2. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 3. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 130-7964 | [1] | TUBE AS | |
| 5. | 127-8167 | [2] | CLIP | |
| 6. | 9R-2603 | [1] | TUBE AS | |
| 7. | 4H-2494 | [3] | SLEEVE-FITTING | |
| 8. | 033-7849 | [2] | PLUG | |
| 9. | 032-8100 | [2] | WASHER (0.531X0.718X0.064-IN THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25500201
106-1379: TANK GP-FUEL
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [4] | CLAMP-HOSE | |
| 2. | 2R-8997 | [1] | PLUG | |
| 3. | 6K-5967 | [1] | CLIP | |
| 4. | 9R-7240 | [1] | GASKET | |
| 5. | 112-5365 | [1] | TUBE AS | |
| 6. | 112-5367 | [1] | TUBE AS | |
| 7. | 116-4808 | [1] | TUBE | |
| 8. | 118-6845 | [1] | TANK AS | |
| 7X-2644 | [1] | CAP | ||
| 9R-5896 | [1] | FILTER ELEMENT-FUEL | ||
| 9. | 118-6846 | [1] | TREAD | |
| 10. | 118-6847 | [1] | STEP AS | |
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 11. | 118-6852 | [1] | PLATE | |
| 12. | 123-4950 M | [2] | SCREW-PAN HEAD (M6X1X16-MM) | |
| 13. | 128-2875 | [1] | SENDER AS-FUEL LEVEL | |
| 9X-8491 | [2] | NUT (10-32-THD) | ||
| 9X-8862 | [2] | LOCKWASHER | ||
| 14. | 2B-2404 | [2] | CLIP | |
| 15. | 3J-7354 | [2] | SEAL-O-RING | |
| 16. | 4J-5477 | [2] | SEAL-O-RING | |
| 17. | 6V-8647 | [2] | CONNECTOR | |
| 18. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 20. | 8T-4189 M | [7] | BOLT (M8X1.25X20-MM) | |
| 21. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 22. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 23. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 5P-6442 E | HOSE (88CM) | ||
| 26. | 5P-6442 E | HOSE (76CM) | ||
| 27. | 5P-4116 | [7] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP25500202
106-1379: TANK GP-FUEL
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-6442 E | HOSE (98CM) | ||
| 1A. | 5P-6442 E | HOSE (59CM) | ||
| 2. | 159-1878 | [1] | TANK AS | |
| 7X-2644 F | [1] | CAP | ||
| 2A. | 106-8020 | [1] | GASKET | |
| 2B. | 123-4950 M | [8] | SCREW-PAN HEAD (M6X1X16-MM) | |
| 2C. | 118-6848 | [1] | PLATE | |
| 3. | 1P-4278 | [4] | CLAMP-HOSE | |
| 4. | 9R-7240 | [1] | GASKET | |
| 5. | 116-4808 | [1] | TUBE | |
| 6. | 118-6846 | [1] | TREAD | |
| 7. | 118-6847 | [1] | STEP AS | |
| 8. | 123-4950 M | [2] | SCREW-PAN HEAD (M6X1X16-MM) | |
| 9. | 128-2875 | [1] | SENDER AS-FUEL LEVEL | |
| 10. | 149-7678 | [1] | TUBE AS | |
| 11. | 149-7679 | [1] | TUBE AS | |
| 12. | 149-7681 | [1] | PLATE AS | |
| 13. | 148-8316 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8947 | [1] | REDUCER | ||
| 14. | 148-8407 | [1] | PLUG AS | |
| 14A. | 3J-1907 | [1] | SEAL-O-RING | |
| 14B. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 15. | 2B-2404 | [2] | CLIP | |
| 16. | 5P-4116 | [7] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 6K-5967 | [1] | CLIP | |
| 18. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 20. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 21. | 8T-4189 M | [7] | BOLT (M8X1.25X20-MM) | |
| 22. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 23. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP25500203
105-2812: ALTERNATOR GP-CHARGING
105-2812 ALTERNATOR GP-CHARGING
S/N 1XR1-2183
12 VOLT, 55 AMP
PART OF 121-5830, 137-3507 ALTERNATOR GP-CHARGING
AN ATTACHMENT
S/N 1XR1-2183
12 VOLT, 55 AMP
PART OF 121-5830, 137-3507 ALTERNATOR GP-CHARGING
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 2. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 3. | 1H-3244 | [1] | LOCKWASHER | |
| 4. | 114-2863 | [1] | PULLEY-ALTERNATOR | |
| 5. | 114-2865 | [1] | FRAME AS-ALTERNATOR | |
| 6. | 114-2866 | [1] | ROTOR AS-ALTERNATOR | |
| 7. | 114-2867 | [1] | FRAME-ALTERNATOR | |
| 8. | 114-2868 | [1] | REGULATOR AS-ALTERNATOR | |
| 9. | 114-2869 | [1] | RECTIFIER AS-ALTERNATOR | |
| 10. | 114-2870 | [1] | HOLDER AS | |
| 11. | 114-2871 | [1] | COVER-ALTERNATOR | |
| 12. | 114-2872 | [1] | BUSHING-ALTERNATOR | |
| AVAILABLE REPAIR KIT(S): | ||||
| 114-2873 | [1] | KIT-ALTERNATOR BEARING | ||
| (INCLUDES COVERS, BEARINGS, WASHER,PLATE & SCREW) | ||||
| 114-2874 | [1] | KIT-ALTERNATOR HARDWARE | ||
| (INCLUDES NUTS & BOLTS) | ||||
| 114-2875 | [1] | KIT-ALTERNATOR HARDWARE | ||
| (INCLUDES SCREWS) | ||||
| M | METRIC PART | |||
#SEBP25500204
105-2813: ALTERNATOR GP-CHARGING
105-2813 ALTERNATOR GP-CHARGING
S/N 1XR1-2183
12-VOLT. 90-AMP
PART OF 121-5831, 121-5832 ALTERNATOR GP-CHARGING
AN ATTACHMENT
S/N 1XR1-2183
12-VOLT. 90-AMP
PART OF 121-5831, 121-5832 ALTERNATOR GP-CHARGING
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-4457 | [1] | PULLEY-ALTERNATOR | |
| 2. | 113-4459 | [1] | FRAME AS-ALTERNATOR | |
| 3. | 113-4460 | [1] | ROTOR AS-ALTERNATOR | |
| 4. | 113-4461 | [1] | FRAME AS-ALTERNATOR | |
| 5. | 113-4462 | [1] | REGULATOR AS-ALTERNATOR | |
| 6. | 113-4463 | [1] | RECTIFIER AS-ALTERNATOR | |
| 7. | 113-4464 | [1] | COVER-ALTERNATOR | |
| 8. | 113-4469 | [4] | BUSHING-ALTERNATOR | |
| 9. | 113-4470 | [1] | BUSHING-ALTERNATOR | |
| 10. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 11. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 1H-3244 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 113-4465 | [1] | KIT-ALTERNATOR BEARING | ||
| (INCLUDES COVERS, BEARINGS, WASHER, PLATE & SCREW) | ||||
| 113-4466 | [1] | KIT-REPAIR (ALTERNATOR BRUSHES) | ||
| (INCLUDES SEALS & HOLDER AS) | ||||
| 113-4467 | [1] | KIT-ALTERNATOR TERMINAL | ||
| (INCLUDES NUTS, PLATE & SCREW) | ||||
| 113-4468 | [1] | KIT-ALTERNATOR HARDWARE | ||
| (INCLUDES SCREWS) | ||||
| M | METRIC PART | |||
#SEBP25500205
121-5830: ALTERNATOR GP-CHARGING
121-5830 ALTERNATOR GP-CHARGING
S/N 1XR1-2183
FOR USE WITH NON AIR CONDITIONED MACHINES WITHOUT EXTRA WORK LIGHTS
AN ATTACHMENT
S/N 1XR1-2183
FOR USE WITH NON AIR CONDITIONED MACHINES WITHOUT EXTRA WORK LIGHTS
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25500206
121-5831: ALTERNATOR GP-CHARGING
121-5831 ALTERNATOR GP-CHARGING
S/N 1XR1-2183
FOR USE WITH NON AIR CONDITIONED MACHINES WITH WORK LIGHTS
AN ATTACHMENT
S/N 1XR1-2183
FOR USE WITH NON AIR CONDITIONED MACHINES WITH WORK LIGHTS
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25500207
121-5832: ALTERNATOR GP-CHARGING
121-5832 ALTERNATOR GP-CHARGING
S/N 1XR1-2183
FOR USE WITH ALL AIR CONDITIONED MACHINES, POWER SHIFT AND HIGH AMBIENT CONFIGURATIONS WITH WORK LIGHTS
AN ATTACHMENT
S/N 1XR1-2183
FOR USE WITH ALL AIR CONDITIONED MACHINES, POWER SHIFT AND HIGH AMBIENT CONFIGURATIONS WITH WORK LIGHTS
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25500208
137-3507: ALTERNATOR GP-CHARGING
137-3507 ALTERNATOR GP-CHARGING
S/N 1XR1-2183
FOR USE WITH HIGH AMBIENT COOLING, NO AIR CONDITIONING, NO WORK LIGHTS
AN ATTACHMENT
S/N 1XR1-2183
FOR USE WITH HIGH AMBIENT COOLING, NO AIR CONDITIONING, NO WORK LIGHTS
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25500209
9R-9870: BATTERY & WIRING GP
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-9902 | [1] | HARNESS AS-PANEL (SIDE) | |
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [22] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6D-4161 | [3] | CONTACT | ||
| 6K-7360 | [1] | CONNECTOR-BULLET | ||
| 6K-7361 | [1] | CONNECTOR-BULLET | ||
| 9X-0196 | [1] | TERMINAL AS (16-GA) | ||
| BE | TUBE-HEAT SHRINK (9.5-MM DIA) | |||
| 8C-5444 | [1] | DIODE-RECTIFIER | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9G-7069 | [3] | SOCKET AS-LAMP | ||
| (EACH INCLUDES) | ||||
| 6D-4162 | [1] | BUSHING-TERMINAL | ||
| 111-6793 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 111-7898 | [2] | CONNECTOR (8-PIN) | ||
| 112-9611 | [6] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 200-2213 | [4] | RECEPTACLE AS-CONNECTOR (3-PIN, GAUGE) | ||
| 128-2016 | [3] | TERMINAL | ||
| 5P-1476 | [4] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 5P-4571 | [5] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 2. | 9R-9906 | [1] | HARNESS AS-CONSOLE (FRONT) | |
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3E-9179 | [1] | TERMINAL-RECEPTACLE (14-GA TO 18-GA) | ||
| 3S-2093 | [18] | STRAP-CABLE | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 111-7898 | [5] | CONNECTOR (8-PIN) | ||
| 112-9611 | [8] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 128-2016 | [5] | TERMINAL | ||
| 5P-4571 | [3] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 9R-9904 | [1] | HARNESS AS-ALARM | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8730 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 5P-1475 | [4] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 4. | 9R-9903 | [1] | HARNESS AS-ENGINE | |
| 3C-2315 | [1] | TERMINAL | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-9799 BE | TUBE (HEAT SHRINK) | |||
| 3T-5433 | [3] | WIRE AS (1O-GA, BLACK) | ||
| 6K-7361 | [1] | CONNECTOR-BULLET | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 107-3134 | [1] | HOUSING-CONNECTOR | ||
| 107-3135 | [3] | TERMINAL (16-GA TO 20-GA) | ||
| 107-3136 | [3] | PLUG-SEAL | ||
| 5P-1478 | [1] | TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 5P-1475 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 5P-1476 | [4] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8052 | [1] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [1] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 2L-8050 | [1] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [1] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 5. | 9R-9897 | [1] | HARNESS AS-PLATFORM | |
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8730 | [34] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 6V-2689 BE | TUBE-HEAT SHRINK (6.35-MM DIA) | |||
| 5P-3175 | [1] | CONNECTOR AS | ||
| 8L-8413 | [7] | STRAP-CABLE (WHITE) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| -OR- | ||||
| 7N-7221 | [1] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 110-0203 | [10] | CONNECTOR AS (18-GA, BLACK) | ||
| 111-6792 | [6] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [6] | LOCK | ||
| 113-5100 | [2] | TERMINAL-BUS | ||
| 116-4160 | [6] | TERMINAL-BLADE (12-GA TO 14-GA) | ||
| 116-4161 | [10] | TERMINAL-BLADE (16-GA TO 18-GA) | ||
| 124-7427 | [1] | BASE | ||
| 124-9636 | [1] | BLOCK-MINIFUSE | ||
| 124-9637 | [1] | LOCK-MINIFUSE | ||
| 125-2122 | [1] | CONNECTOR | ||
| 5P-1476 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8052 | [2] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [2] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 130-4575 | [7] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 130-4578 | [10] | TERMINAL-BLADE | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 140-9689 | [1] | TERMINAL-BUS | ||
| 6. | 3E-9362 | [4] | RELAY AS (12-VOLT) | |
| 7. | 113-8491 | [1] | FUSE (15-AMPERE) | |
| 8. | 8T-5432 M | [2] | BOLT (M5X0.8X16-MM) | |
| 9. | 114-4516 | [1] | BLOCK | |
| 10. | 114-4520 | [1] | PANEL | |
| 11. | 106-6570 | [1] | SWITCH AS-ROCKER (HORN) | |
| 111-7899 | [1] | GASKET | ||
| 12. | 106-6571 | [1] | SWITCH AS-ROCKER (TURN SIGNAL) | |
| 111-7899 | [1] | GASKET | ||
| 13. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 14. | 6V-9189 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 15. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 131-0232 | [1] | COVER | |
| 17. | 8T-4121 B | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 123-4950 M | [3] | SCREW-PAN HEAD (M6X1X16-MM) | |
| 19. | 106-6569 | [1] | SWITCH AS-ROCKER (STARTING AID) | |
| 111-7899 | [1] | GASKET | ||
| 20. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 21. | 110-7883 J | [1] | SWITCH GP-START | |
| 6V-8362 | [5] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 9B-7233 | [5] | LOCKWASHER | ||
| 22. | 105-8034 | [1] | SWITCH AS-LIMIT (PARKING) | |
| 23. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 24. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 25. | 4P-8134 | [4] | CLIP (LADDER) | |
| 26. | 7T-0635 | [1] | HORN AS (12-VOLT) | |
| 8C-7581 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | ||
| 27. | 4P-7581 | [3] | CLIP (LADDER) | |
| 28. | 8T-4136 M | [5] | BOLT (M10X1.5X25-MM) | |
| 29. | 7Y-8299 | [1] | CABLE AS (NEGATIVE) | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0747 BE | CABLE (00-GA, BLACK)(35-CM) | |||
| 30. | 109-2356 | [6] | PLUG | |
| 31. | 106-6567 | [1] | SWITCH AS-ROCKER (HAZARD WARNING LIGHTS) | |
| 111-7899 | [1] | GASKET | ||
| 32. | 114-4521 | [1] | SWITCH AS-ROCKER (TRANSMISSION NEUTRAL LOCK) | |
| 111-7899 | [1] | GASKET | ||
| 33. | 8N-0869 | [1] | COVER-TERMINAL (RED) | |
| 34. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 7T-4848 | [1] | FLASHER AS (12-VOLT) | ||
| 35. | 7T-4848 | [1] | FLASHER AS (12-VOLT) | |
| 36. | 1Y-7486 | [2] | SCREW (10-24X0.875-IN) | |
| 37. | 113-8490 | [7] | FUSE (10-AMPERE) | |
| 38. | 113-8493 | [1] | FUSE (25-AMPERE)(25AMP) | |
| 39. | 3S-2093 B | [29] | STRAP-CABLE | |
| 40. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 41. | 8T-8799 | [1] | BOOT (RED) | |
| 42. | 099-0822 M | [1] | BOLT-SOCKET HEAD (M5X0.8X10-MM) | |
| 43. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 44. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 45. | 124-3548 | [1] | FUSE (30-AMPERE) | |
| 46. | 112-4735 | [1] | CONTROL GP-DIODE BLOCK | |
| 47. | 3Y-8491 | [1] | NUT-FULL (3/8-16-THD) | |
| 48. | 7K-1181 B | [3] | STRAP-CABLE | |
| 49. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 50. | 9M-9085 | [1] | CIRCUIT BREAKER AS (15-AMPERE) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 51. | 4B-4274 | [1] | WASHER (5.5X13X1.2-MM THK) | |
| 52. | 5P-4116 H | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 53. | 8T-4200 HM | [1] | BOLT (M8X1.25X16-MM) | |
| 54. | 4P-7581 H | [2] | CLIP (LADDER) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| H | NATURALLY ASPIRATED | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
Information:
FUEL SYSTEM
SEPARATOR GP-WATER
Operation and Maintenance Manual
Special Instruction
Disassembly and Assembly
Service Magazine
