ELECTRICAL AND STARTING SYSTEM
BATTERY GPELECTRONICS GP-IMPLEMENT
CONTROL GP-ELECTRONIC
ELECTRONICS GP-MACHINE
HEATER GP
ELECTRONICS GP-MACHINE
ELECTRICAL AND STARTING SYSTEM
BATTERY GP
#SEBP25500210
9R-9870: BATTERY & WIRING GP
9R-9870 BATTERY & WIRING GP
S/N 1XR1-2183
PART OF 104-3451 CAB AR-ENCLOSED ROPS, 115-1722 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N 1XR1-2183
PART OF 104-3451 CAB AR-ENCLOSED ROPS, 115-1722 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-9902 | [1] | HARNESS AS-PANEL (SIDE) | |
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [22] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6D-4161 | [3] | CONTACT | ||
| 6K-7360 | [1] | CONNECTOR-BULLET | ||
| 6K-7361 | [1] | CONNECTOR-BULLET | ||
| 9X-0196 | [1] | TERMINAL AS (16-GA) | ||
| BE | TUBE-HEAT SHRINK (9.5-MM DIA) | |||
| 8C-5444 | [1] | DIODE-RECTIFIER | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9G-7069 | [3] | SOCKET AS-LAMP | ||
| (EACH INCLUDES) | ||||
| 6D-4162 | [1] | BUSHING-TERMINAL | ||
| 111-6793 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 111-7898 | [2] | CONNECTOR (8-PIN) | ||
| 112-9611 | [6] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 200-2213 | [4] | RECEPTACLE AS-CONNECTOR (3-PIN, GAUGE) | ||
| 128-2016 | [3] | TERMINAL | ||
| 5P-1476 | [4] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 5P-4571 | [5] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 2. | 9R-9906 | [1] | HARNESS AS-CONSOLE (FRONT) | |
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3E-9179 | [1] | TERMINAL-RECEPTACLE (14-GA TO 18-GA) | ||
| 3S-2093 | [18] | STRAP-CABLE | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 111-7898 | [5] | CONNECTOR (8-PIN) | ||
| 112-9611 | [8] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 128-2016 | [5] | TERMINAL | ||
| 5P-4571 | [3] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 9R-9904 | [1] | HARNESS AS-ALARM | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8730 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 5P-1475 | [4] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 4. | 161-6624 | [1] | HARNESS AS-WIRING (STEERING COLUMN) | |
| 6V-2689 BE | TUBE-HEAT SHRINK (6.35-MM DIA) | |||
| 5P-3175 | [1] | CONNECTOR AS | ||
| 8L-8413 | [7] | STRAP-CABLE (WHITE) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| -OR- | ||||
| 7N-7221 | [1] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 110-0203 | [4] | CONNECTOR AS (18-GA, BLACK) | ||
| 111-6792 | [7] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [6] | LOCK | ||
| 113-5100 | [2] | TERMINAL-BUS | ||
| 116-4160 | [6] | TERMINAL-BLADE (12-GA TO 14-GA) | ||
| 116-4161 | [10] | TERMINAL-BLADE (16-GA TO 18-GA) | ||
| 124-7427 | [1] | BASE | ||
| 124-9636 | [1] | BLOCK-MINIFUSE | ||
| 124-9637 | [1] | LOCK-MINIFUSE | ||
| 125-2122 | [3] | CONNECTOR | ||
| 9X-3402 | [35] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-1476 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8052 | [3] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [3] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 130-4575 | [8] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 130-4578 | [12] | TERMINAL-BLADE | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 140-9689 | [1] | TERMINAL-BUS | ||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 5. | 6K-0806 C | [1] | STRAP-CABLE | |
| 6. | 3E-9362 | [5] | RELAY AS (12-VOLT) | |
| 7. | 113-8491 | [1] | FUSE (15-AMPERE) | |
| 8. | 8T-5432 M | [2] | BOLT (M5X0.8X16-MM) | |
| 9. | 114-4516 | [1] | BLOCK | |
| 10. | 114-4520 | [1] | PANEL | |
| 11. | 106-6570 | [1] | SWITCH AS-ROCKER (HORN) | |
| 111-7899 | [1] | GASKET | ||
| 12. | 106-6571 | [1] | SWITCH AS-ROCKER (TURN SIGNAL) | |
| 111-7899 | [1] | GASKET | ||
| 13. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 14. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 15. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 9M-9085 | [1] | CIRCUIT BREAKER AS (15-AMPERE) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 17. | 8T-4121 BC | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 19. | 106-6569 | [1] | SWITCH AS-ROCKER (STARTING AID) | |
| 111-7899 | [1] | GASKET | ||
| 20. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 21. | 163-2660 J | [1] | SWITCH GP-START | |
| 6V-8362 | [4] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 9B-7233 | [4] | LOCKWASHER | ||
| 22. | 105-8034 | [1] | SWITCH AS-LIMIT (PARKING) | |
| 23. | 7K-1181 BC | [8] | STRAP-CABLE | |
| 24. | 3Y-8491 | [1] | NUT-FULL (3/8-16-THD) | |
| 25. | 112-4735 | [1] | CONTROL GP-DIODE BLOCK | |
| 26. | 7T-0635 | [1] | HORN AS (12-VOLT) | |
| 8C-7581 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 27. | 4P-7581 C | [1] | CLIP (LADDER) | |
| 28. | 8T-4136 CM | [3] | BOLT (M10X1.5X25-MM) | |
| 29. | 7Y-3883 | [1] | CABLE AS | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0747 BE | CABLE (00-GA, BLACK)(40CM) | |||
| 30. | 109-2356 | [9] | PLUG | |
| 31. | 106-6567 | [1] | SWITCH AS-ROCKER (HAZARD WARNING LIGHTS) | |
| 111-7899 | [1] | GASKET | ||
| 32. | 114-4521 | [1] | SWITCH AS-ROCKER (TRANSMISSION NEUTRAL LOCK) | |
| 111-7899 | [1] | GASKET | ||
| 33. | 8N-0869 | [1] | COVER-TERMINAL (RED) | |
| 34. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 35. | 7T-4848 | [1] | FLASHER AS (12-VOLT) | |
| 36. | 1Y-7486 | [2] | SCREW (10-24X0.875-IN) | |
| 37. | 113-8490 | [7] | FUSE (10-AMPERE) | |
| 38. | 113-8493 | [1] | FUSE (25-AMPERE)(25AMP) | |
| 39. | 3S-2093 BC | [15] | STRAP-CABLE | |
| 40. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| 41. | 124-3548 | [1] | FUSE (30-AMPERE) | |
| 42. | 099-0822 M | [1] | BOLT-SOCKET HEAD (M5X0.8X10-MM) | |
| 43. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 44. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 45. | 9S-1328 | [1] | WASHER (26X41X1.6-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP25500211
119-8016: BATTERY GP
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-1658 | [1] | CABLE AS-BATTERY (POSITIVE) | |
| 5P-0761 E | CABLE (00-GA, RED)(94-CM) | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8Y-8081 E | TUBE-CONVOLUTED (77-CM) | |||
| 7T-9987 | [1] | COVER AS-TERMINAL (RED) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 3T-3349 | [1] | STUD (5/16-18X0.5-IN, 5/16-18X1.5-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 2. | 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | |
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 3. | 3S-2093 | [2] | STRAP-CABLE | |
| 4. | 4P-8134 | [1] | CLIP (LADDER) | |
| 5. | 117-3642 | [2] | HOLDER | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-0441 M | [2] | BOLT (M10X1.5X45-MM) | |
| 8. | 3T-5760 | [2] | BATTERY GP (12-VOLT, 750-CCA) | |
| 9. | 4H-2558 | [1] | GROMMET | |
| 10. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 130-8293 | [1] | CABLE AS-BATTERY (NEGATIVE) | |
| 5P-0747 E | CABLE (00-GA, BLACK)(46-CM) | |||
| 12. | 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | |
| 13. | 7N-5274 | [2] | COVER AS-TERMINAL (BLACK) | |
| 14. | 3S-6050 | [2] | TERMINAL AS-BATTERY (NEGATIVE) | |
| (EACH INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 15. | 7K-1181 | [2] | STRAP-CABLE | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP25500212
119-8016: BATTERY GP
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-1658 | [1] | CABLE AS-BATTERY (POSITIVE) | |
| 5P-0761 E | CABLE (00-GA, RED)(94-CM) | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 8Y-8081 E | TUBE-CONVOLUTED (77-CM) | |||
| 7T-9987 | [1] | COVER AS-TERMINAL (RED) | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 3T-3349 | [1] | STUD (5/16-18X0.5-IN, 5/16-18X1.5-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 2. | 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | |
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 3. | 3S-2093 C | [2] | STRAP-CABLE | |
| 4. | 4P-8134 | [1] | CLIP (LADDER) | |
| 5. | 120-9336 C | [2] | BRACKET AS | |
| 6. | 7X-7729 C | [2] | WASHER (11X25X3-MM THK) | |
| 7. | 8T-5005 CM | [2] | BOLT (M10X1.5X70-MM) | |
| 8. | 3T-5760 | [2] | BATTERY GP (12-VOLT, 750-CCA) | |
| 9. | 4H-2558 | [1] | GROMMET | |
| 10. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 130-8293 | [1] | CABLE AS-BATTERY (NEGATIVE) | |
| 5P-0747 E | CABLE (00-GA, BLACK)(46-CM) | |||
| 12. | 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | |
| 13. | 7N-5274 | [2] | COVER AS-TERMINAL (BLACK) | |
| 14. | 3S-6050 | [2] | TERMINAL AS-BATTERY (NEGATIVE) | |
| (EACH INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 15. | 7K-1181 | [3] | STRAP-CABLE | |
| 16. | 8T-4133 CM | [2] | NUT (M10X1.5-THD) | |
| 17. | 038-9317 | [2] | TREAD-NONSKID | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP25500213
122-5865: BATTERY GP
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-5760 | [1] | BATTERY GP (12-VOLT, 750-CCA) | |
| 2. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 4. | 120-9336 | [1] | BRACKET AS | |
| 5. | 130-8292 | [1] | CABLE AS-BATTERY (NEGATIVE) | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(13-CM) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 6. | 141-1656 | [1] | CABLE AS-BATTERY (POSITIVE) | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0761 E | CABLE (00-GA, RED)(56-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8Y-8081 E | TUBE-CONVOLUTED (48-CM) | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7. | 4H-2558 | [1] | GROMMET | |
| 8. | 7K-1181 | [3] | STRAP-CABLE | |
| 9. | 8T-5005 M | [1] | BOLT (M10X1.5X70-MM) | |
| 10. | 4P-8134 | [1] | CLIP (LADDER) | |
| 11. | 3S-2093 | [1] | STRAP-CABLE | |
| 12. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 13. | 038-9317 | [1] | TREAD-NONSKID | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP25500214
3E-7843: CONTROL GP-POSITION
3E-7843 CONTROL GP-POSITION
S/N 1XR1-2183
PART OF 122-1644 WIRING GP-KICKOUT & POSITIONER
S/N 1XR1-2183
PART OF 122-1644 WIRING GP-KICKOUT & POSITIONER
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25500215
158-2963: CONTROL GP-XMSN ELECTRONIC
158-2963 CONTROL GP-XMSN ELECTRONIC
S/N 1XR684-2183
PART OF 141-9887 WIRING GP-POWER SHIFT
AN ATTACHMENT
S/N 1XR684-2183
PART OF 141-9887 WIRING GP-POWER SHIFT
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25500216
207-5262: ELECTRONICS GP-MACHINE
207-5262 ELECTRONICS GP-MACHINE -SECURITY
S/N 1XR1-2183
PART OF 197-4607 INSTALLATION GP-SECURITY
S/N 1XR1-2183
PART OF 197-4607 INSTALLATION GP-SECURITY
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 156-6155 | [1] | CONTROL GP-UNPROGRAMMED (SECURITY) | |
| 1A. | 7X-6315 | [1] | STRAP AS-GROUND | |
| 1B. | 184-2472 | [1] | SCREW-PAN HEAD (8-32X0.375-IN) | |
| 1C. | 134-4126 | [1] | WASHER (4.52X8.28X0.76-MM THK) | |
| 2. | 220-6355 | [1] | SOFTWARE GP-MACHINE (SECURITY) | |
| 3. | 206-5162 | [2] | KEY AS-ELECTRONIC (SECURITY) | |
| 4. | 219-6314 | [2] | KEY RING (IDENTIFICATION) |
#SEBP25500217
117-9320: HEATER GP-JACKET WATER
117-9320 HEATER GP-JACKET WATER
S/N 1XR1-2183
120 VOLT-1250 WATTS
AN ATTACHMENT
S/N 1XR1-2183
120 VOLT-1250 WATTS
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25500218
117-9321: HEATER GP-JACKET WATER
117-9321 HEATER GP-JACKET WATER
S/N 1XR1-2183
240 VOLT-1250 WATT
AN ATTACHMENT
S/N 1XR1-2183
240 VOLT-1250 WATT
AN ATTACHMENT
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP25500219
197-4607: INSTALLATION GP-SECURITY
For full view, you need register
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 207-5262 Y | [1] | ELECTRONICS GP-MACHINE (SECURITY) | ||
| 205-8257 | [1] | COIL AS (EXCITER) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.4-M) | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 207-5271 | [1] | WASHER (27X60.5X0.36-MM THK) | ||
| 222-3870 | [1] | COIL AS (FERRITE) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.8-M) | |||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 197-2004 | [1] | HARNESS AS-CONTROL (SECURITY) | ||
| 8C-6353 | [1] | CAP-PLUG | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 150-6766 | [1] | PLUG AS-CONNECTOR (26-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8735 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [21] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 8T-8730 | [15] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 100-5041 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 165-5655 | [1] | LAMP AS (24-VOLT)(SECURITY SYSTEM) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 115-1615 | [1] | RELAY AS (12-VOLT)(SECURITY SYSTEM) | ||
| 213-2323 | [1] | PLATE AS | ||
| 156-6175 | [1] | CLIP (LADDER) | ||
| 226-5602 | [1] | FILM-IDENTIFICATION (EXCITER COIL) | ||
| 225-5927 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, READ OMM) | ||
| 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6V-9189 M | [3] | LOCKNUT (M8X1.25-THD) | ||
| 129-3178 M | [4] | LOCKNUT (M6X1-THD) | ||
| 8T-9655 | [6] | MOUNT-ISOLATION | ||
| 230-8173 | [1] | PLATE-COVER | ||
| 9D-3767 | [1] | PLUG-BUTTON | ||
| 200-6260 M | [3] | SCREW-BUTTON HEAD (M8X1.25X50-MM) | ||
| 184-0982 M | [2] | SCREW-PAN HEAD (M6X1X16-MM) | ||
| 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 115-8109 | [1] | SPLICE-WIRE | ||
| 7K-1181 | [15] | STRAP-CABLE | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
BATTERY GP
Truck Engine News
Engine News
Operation and Maintenance Manual
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Troubleshooting
Service Magazine
