185-1839 CYLINDER GP-MULTIPURPOSE BUKT S/N 1XR1-2183 76.2-MM (2.99-IN) BORE X 262-MM (10.31-IN) STROKE PART OF 124-0488 BUCKET AR-MULTIPURPOSE FIELD REPLACEMENT FOR @@@@@ 9T-4006@@@@@ AN ATTACHMENT 416C

HYDRAULIC SYSTEM

CYLINDER GP

0. 185-1839 CYLINDER G
1. 9T-4006 CYLINDER G
2. 131-1846 CYLINDER G
3. 131-1847 CYLINDER G
4. 109-7020 CYLINDER G
5. 6E-0404 CYLINDER G
6. 116-6861 CYLINDER G
7. 123-5091 CYLINDER G

FUEL SYSTEM

DRAIN GP-FUEL

8. 120-9641 DRAIN GP-E

HYDRAULIC SYSTEM

DRIVE GP

9. 112-1826 DRIVE & MT
0. INFORMATION

BACKHOE LOADER 416C BACKHOE LOADER 1XR
416C Backhoe Loader Center Pivot, Parallel Lift 1XR00001-02183 (MACHINE) POWERED BY 3054 Engine SEBP2550 416C 1XR (1996)

HYDRAULIC SYSTEM

CYLINDER GP

123-5087 CYLINDER GP-LIFT

123-5089 CYLINDER GP-LIFT

185-1839 CYLINDER GP-MULTIPURPOSE BUKT

9T-4006 CYLINDER GP-MULTIPURPOSE BUKT

131-1846 CYLINDER GP-STABILIZER

131-1847 CYLINDER GP-STABILIZER

#SEBP25500380

185-1839: CYLINDER GP-MULTIPURPOSE BUKT

CYLINDER GP-MULTIPURPOSE BUKT

185-1839 CYLINDER GP-MULTIPURPOSE BUKT
S/N 1XR1-2183
76.2-MM (2.99-IN) BORE X 262-MM (10.31-IN) STROKE
PART OF 124-0488 BUCKET AR-MULTIPURPOSE
FIELD REPLACEMENT FOR @@@@@ 9T-4006@@@@@
AN ATTACHMENT

i01421820 SEBP2550

1851839 CYLINDER GP-MULTIPURPOSE BUKT Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-0122	[1]	HEAD
2.	9T-2212	[1]	PISTON
3.	9T-4008	[1]	ROD AS
3A.	9T-4007	[2]	BEARING
4.	9T-4009	[1]	CYLINDER AS
5.	167-2186 J	[1]	SEAL AS-BUFFER
6.	167-2294 J	[1]	SEAL-U-CUP
7.	1H-7339 J	[1]	SEAL-O-RING
8.	226-8202 J	[1]	SEAL-WIPER
9.	4T-6780 J	[1]	RING-WEAR
10.	5P-8250	[1]	WASHER (28X49X5-MM THK)
11.	6F-7037	[1]	BOLT (1-14X3.25-IN)
12.	6J-1972 J	[1]	SEAL AS
13.	6J-5733 J	[1]	RING-WEAR
14.	8J-2574 J	[1]	RING-BACKUP

			AVAILABLE REPAIR KIT(S):
	235-0354 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(ALSO INCLUDES BACKUP RING)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25500381

9T-4006: CYLINDER GP-MULTIPURPOSE BUKT

CYLINDER GP-MULTIPURPOSE BUKT

9T-4006 CYLINDER GP-MULTIPURPOSE BUKT
S/N 1XR1-2183
76.2-MM (3-IN) BORE X 260-MM (10.2-IN) STROKE
PART OF 124-0487, 124-0490, 124-0491 BUCKET AR-MULTIPURPOSE
FIELD REPLACEMENT ORDER @@@@@185-1839@@@@@
AN ATTACHMENT

i00433775 SEBP2550

9T4006 CYLINDER GP-MULTIPURPOSE BUKT Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-4008	[1]	ROD AS
2.	9T-4007	[2]	BEARING
3.	167-2450 J	[1]	SEAL-WIPER
4.	167-2294 J	[1]	SEAL-U-CUP
5.	167-2186 J	[1]	SEAL AS-BUFFER
6.	4T-6780 J	[1]	RING-WEAR
7.	9T-2074	[1]	HEAD
8.	8J-2574 J	[1]	RING-BACKUP
9.	1H-7339	[1]	SEAL-O-RING
10.	9T-4009	[1]	CYLINDER AS
11.	6J-1972 J	[1]	SEAL AS
12.	5P-8250	[1]	WASHER (28X49X5-MM THK)
13.	6F-7037	[1]	BOLT (1-14X3.25-IN)
14.	9T-2212	[1]	PISTON
15.	6J-5733 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	185-6583 J	[1]	KIT-SEAL
			(INCLUDES BACKUP RING & O-RING SEAL)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25500382

131-1846: CYLINDER GP-STABILIZER

CYLINDER GP-STABILIZER

131-1846 CYLINDER GP-STABILIZER -LH
S/N 1XR1-2183
101.6MM(4IN) BORE X 541MM(31.2IN) STROKE
PART OF 120-9572, 143-1794 HYDRAULIC AR

i00507482 SEBP2550

1311846 CYLINDER GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-1850	[1]	CYLINDER AS
	7J-9903	[1]	BOSS
2.	9R-0321	[2]	BUSHING
3.	4K-0684	[1]	WASHER-HARD (34X55X6-MM THK)
4.	6J-2797	[1]	RING-WEAR
5.	5J-5402	[1]	SEAL AS
6.	4T-7354	[1]	PISTON
7.	9X-4611	[1]	SEAL-O-RING
8.	2K-6830	[1]	RING-BACKUP
9.	9T-6388	[1]	HEAD
10.	131-1856	[1]	ROD AS
11.	9R-0321	[2]	BUSHING
12.	9X-3568	[1]	SEAL AS
13.	4T-6126	[1]	SEAL-U-CUP
14.	9X-3567	[1]	SEAL-LIP TYPE
15.	8D-4069	[1]	RING
16.	7F-6112	[1]	BOLT (1-1/4-12X3-IN)
17.	4T-6128	[1]	RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25500383

131-1847: CYLINDER GP-STABILIZER

CYLINDER GP-STABILIZER

131-1847 CYLINDER GP-STABILIZER -RH
S/N 1XR1-2183
101.6MM(4IN) BORE X 541MM(21.3IN) STROKE
PART OF 120-9572, 143-1794 HYDRAULIC AR

i00507545 SEBP2550

1311847 CYLINDER GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-1851	[1]	CYLINDER AS
2.	9R-0321	[2]	BUSHING
	7J-9903	[1]	BOSS
3.	4K-0684	[1]	WASHER-HARD (34X55X6-MM THK)
4.	6J-2797	[1]	RING-WEAR
5.	5J-5402	[1]	SEAL AS
6.	4T-7354	[1]	PISTON
7.	9X-4611	[1]	SEAL-O-RING
8.	2K-6830	[1]	RING-BACKUP
9.	9T-6388	[1]	HEAD
10.	131-1856	[1]	ROD AS
11.	9R-0321	[2]	BUSHING
12.	9X-3568	[1]	SEAL AS
13.	4T-6126	[1]	SEAL-U-CUP
14.	9X-3567	[1]	SEAL-LIP TYPE
15.	8D-4069	[1]	RING
16.	7F-6112	[1]	BOLT (1-1/4-12X3-IN)
17.	4T-6128	[1]	RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25500384

109-7020: CYLINDER GP-STICK

CYLINDER GP-STICK

109-7020 CYLINDER GP-STICK
S/N 1XR1-2183
114.3-MM (4.5-IN) BORE X 695-MM (28-IN) STROKE
PART OF 120-9572, 143-1794 HYDRAULIC AR

i00492535 SEBP2550

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	106-5738	[1]	CYLINDER AS
	9R-0139	[2]	BUSHING
2.	8F-5535	[1]	BOLT (1-1/2-12X4-IN)
3.	3S-6162	[1]	WASHER-HARD (40.5X67X6-MM THK)
4.	109-7015	[1]	PISTON
5.	3E-6703	[1]	SEAL-O-RING
6.	1K-7095	[1]	RING-BACKUP
7.	174-7432	[1]	HEAD
8.	134-2659	[1]	ROD AS
	9R-0139	[2]	BUSHING
9.	9X-7269 J	[1]	SEAL AS
10.	4J-3745 J	[1]	RING-WEAR
11.	8C-3840 J	[1]	SEAL-LIP TYPE
12.	5J-0964 J	[1]	SEAL-U-CUP
13.	8C-3839 J	[1]	SEAL AS
14.	8T-0785	[1]	RING-WEAR
15.	1K-6985	[1]	RING-RETAINING
16.	6V-6718 M	[1]	SCREW-SELF-TAPPING (8-32X0.25-IN)

			AVAILABLE REPAIR KIT(S):
	111-3300 J	[1]	KIT-HYD CYLINDER SEAL
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25500385

6E-0404: CYLINDER GP-STICK

CYLINDER GP-STICK

6E-0404 CYLINDER GP-STICK -EXTENDABLE STICK
S/N 1XR1-2183
76-MM (3-IN) BORE X 1067-MM (42-IN) STROKE
PART OF 119-1237 STICK GP-EXTENDABLE
AN ATTACHMENT

i00396344 SEBP2550

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-1757	[1]	ROD AS
2.	8C-9131	[1]	SEAL-LIP TYPE
3.	5J-8150	[1]	SEAL-U-CUP
4.	8C-9122	[1]	SEAL AS
5.	4T-6780	[1]	RING-WEAR
6.	6E-0122	[1]	HEAD
7.	6J-5731	[1]	RING-BACKUP
8.	1H-7339	[1]	SEAL-O-RING
9.	6V-8237	[1]	WASHER (26X44X4-MM THK)
10.	6V-8133 M	[1]	BOLT (M24X3X80-MM)
11.	6J-1972	[1]	SEAL AS
12.	6E-1755	[1]	CYLINDER AS
	9T-2969	[1]	BOSS
13.	9T-2212	[1]	PISTON
14.	6J-5733	[1]	RING-WEAR
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25500386

116-6861: CYLINDER GP-SWING

CYLINDER GP-SWING

116-6861 CYLINDER GP-SWING
S/N 1XR1-2183
101.6 MM (4 IN) BORE X 249 MM (9.8 IN) STROKE
PART OF 120-9572, 143-1794 HYDRAULIC AR

i00488236 SEBP2550

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-6857	[1]	CYLINDER AS
2.	9T-2883	[2]	BEARING
3.	6J-2797 J	[1]	RING-WEAR
4.	8C-9160 J	[1]	SEAL AS
5.	112-1773	[1]	PISTON
6.	4T-5613 J	[1]	RING-WEAR
7.	8C-9124 J	[1]	SEAL AS
8.	5J-8200 J	[1]	SEAL-U-CUP
9.	9X-4611	[1]	SEAL-O-RING
10.	2K-6830 J	[1]	RING-BACKUP
11.	6E-5651	[1]	HEAD
12.	8C-9133	[1]	SEAL
13.	8J-9992	[1]	LOCKNUT
14.	125-7894	[1]	ROD AS
15.	9R-9505	[2]	BUSHING
16.	3N-5739	[1]	SPRING
17.	6E-1478	[1]	PLUNGER
18.	2Y-5821	[1]	RING
19.	102-3582	[1]	WASHER (11X19.5X2.5-MM THK)
20.	8J-0484	[1]	RING-RETAINING
21.	6E-5649	[1]	WASHER (1.25-MM THK)


			AVAILABLE REPAIR KIT(S):
	240-9538 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25500387

123-5091: CYLINDER GP-TILT

CYLINDER GP-TILT

123-5091 CYLINDER GP-TILT
S/N 1XR1-2183
76.2MM (3IN) BORE X 884.5MM (34.8IN) STROKE
PART OF 120-9572, 143-1794 HYDRAULIC AR

i00514698 SEBP2550

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	114-2225	[1]	CYLINDER AS
	9R-0153	[1]	BUSHING
2.	173-9779 M	[1]	BOLT (M24X3X80-MM)
3.	6V-8237	[1]	WASHER (26X44X4-MM THK)
4.	9T-2547	[1]	PISTON
5.	6J-1972	[1]	SEAL AS
6.	6J-5733	[1]	RING-WEAR
7.	1H-7339	[1]	SEAL-O-RING
8.	6J-5731	[1]	RING-BACKUP
9.	148-2593	[1]	HEAD
10.	114-2229	[1]	ROD AS
	9R-0321	[1]	BUSHING
11.	8J-0484	[1]	RING-RETAINING
12.	8C-9133	[1]	SEAL
13.	5J-8200	[1]	SEAL-U-CUP
14.	8C-9124	[1]	SEAL AS
15.	4T-5613	[1]	RING-WEAR
	M		METRIC PART

#SEBP25500388

120-9641: DRAIN GP-ECOLOGY

DRAIN GP-ECOLOGY

120-9641 DRAIN GP-ECOLOGY
S/N 1XR1-2183
AN ATTACHMENT

i00478107 SEBP2550

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-9780	[1]	SEAL-O-RING
2.	133-6337	[1]	PLUG-DRAIN
3.	134-8474	[1]	TUBE AS-DRAIN

#SEBP25500389

112-1826: DRIVE & MTG GP-PUMP

DRIVE & MTG GP-PUMP

112-1826 DRIVE & MTG GP-PUMP
S/N 1XR1-2183
PART OF 120-9572, 143-1794 HYDRAULIC AR

i00487466 SEBP2550

1121826 DRIVE & MTG GP-PUMP Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
2.	9U-8886	[1]	RING-SEAL
3.	115-1918	[1]	PLATE
4.	117-3534	[1]	ADAPTER
5.	274-4555	[1]	HUB
6.	128-5596 Y	[1]	SHAFT GP-PUMP DRIVE
7.	175-7904	[1]	SEAL-O-RING
8.	8T-4122	[2]	WASHER-HARD (17X32X3.5-MM THK)
9.	8T-7338 M	[2]	BOLT (M16X2X45-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders

Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications

Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines

THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS

Service Letter-APD

Bench Test Procedures

Disassembly and Assembly

Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Extendible Stick Cylinder & Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Service Magazine

Correction To Backhoe Loader C-Series Parts Manuals{7222,7567}
1997/07/28

Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25

New Stabilizer Pads Are Wider{7222}
1998/03/09

Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08

Lubrication Of The Stabilizer Pad Pin On Backhoe Loaders {7528,7222,7581}
1999/01/25

Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28

Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20

New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04

New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05

A New Check Valve Reduces Voiding {5067, 5104}
2000/08/28

The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16

Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07

Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14

New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30

Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02

Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01

Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

New Stabilizer Pads Make Stabilizer Operation Quieter {5468, 7150, 7222}
2001/10/08

Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05

Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08

New Hydraulic Tubes Are Used in the Quick Coupler Lines Gp {5057, 5133, 6129}
2003/05/12

Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/05/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Caterpillar Parts SIS Catalog 416C :

123-5089 CYLINDER GP-LIFT

123-5087 CYLINDER GP-LIFT

111-0888 CYLINDER GP-LIFT

9T-8823 CYLINDER GP-COUPLER

6E-0274 CYLINDER GP-BOOM

6E-1964 CYLINDER GP-BACKHOE BUCKET

126-8308 CYLINDER GP-BACKHOE BUCKET

122-6404 CYLINDER & MTG GP-COUPLER

9T-4006 CYLINDER GP-MULTIPURPOSE BUKT

131-1846 CYLINDER GP-STABILIZER

131-1847 CYLINDER GP-STABILIZER

109-7020 CYLINDER GP-STICK

6E-0404 CYLINDER GP-STICK

116-6861 CYLINDER GP-SWING

123-5091 CYLINDER GP-TILT

120-9641 DRAIN GP-ECOLOGY

Truck sale:

Caterpillar 416C
- backhoe loader
FOLEY, INC.

4,063

Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA

37,100

Caterpillar 416C, backhoe loader, Construction

26,000

Caterpillar 416C, backhoe loader, Construction

34,000

Caterpillar 416C, backhoe loader, Construction