AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

119-4118 LINES GP-COUPLER S/N 1XR1-2183 PART OF 119-8179, 119-8181 HYDRAULIC AR AN ATTACHMENT 416C BACKHOE LOADER


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-STICK
LINES GP-HYDRAULIC

BACKHOE LOADER 416C BACKHOE LOADER 1XR
 416C Backhoe Loader Center Pivot, Parallel Lift 1XR00001-02183 (MACHINE) POWERED BY 3054 Engine SEBP2550 416C 1XR   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SWING
116-6861 CYLINDER GP-SWING
CYLINDER GP-TILT
123-5091 CYLINDER GP-TILT
LINES GP-COUPLER
119-4118 LINES GP-COUPLER
LINES GP-COUPLER
138-9796 LINES GP-COUPLER
LINES GP-COUPLER
148-2301 LINES GP-COUPLER
LINES GP-COUPLER
149-1062 LINES GP-COUPLER
 

#SEBP25500440
 

119-4118: LINES GP-COUPLER

119-4118 LINES GP-COUPLER
S/N 1XR1-2183
PART OF 119-8179, 119-8181 HYDRAULIC AR
AN ATTACHMENT
i00520136 SEBP2550
1194118 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0408 [2] SEAL-BONDED  
2. 6W-2888 [2] FITTING AS (QUICK DISCONNECT, MALE)  
3. 6W-2890 [2] CAP AS-DUST  
4. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
5. 112-5839 [1] TUBE AS  
6. 112-5840 [1] TUBE AS  
7. 118-4639 I [2] HOSE AS  
8. 122-6404 Y [1] CYLINDER & MTG GP-COUPLER  
9. 123-0431 I [1] HOSE AS  
10. 126-1084 [2] BRACKET-MOUNTING  
11. 126-4163 [1] BLOCK  
12. 126-7349 I [1] HOSE AS  
13. 127-5501 I [1] HOSE AS  
14. 128-7954 [2] BLOCK  
15. 130-7968 [1] TUBE AS  
16. 130-7969 [1] TUBE AS  
17. 130-7970 [1] COVER  
18. 131-1926 [1] BRACKET AS  
19. 131-1927 [1] BRACKET AS  
20. 131-7165 [1] TUBE AS  
21. 133-8610 [1] ELBOW  
22. 133-8912 Y [1] VALVE & MTG GP-COUPLER  
23. 133-9740 [2] CONNECTOR  
24. 2M-9780 [8] SEAL-O-RING  
25. 3D-2824 [2] SEAL-O-RING  
26. 3J-1907 [3] SEAL-O-RING  
27. 3K-0360 [3] SEAL-O-RING  
28. 6V-8397 [6] SEAL-O-RING  
29. 6V-8398 [4] SEAL-O-RING  
30. 6V-8626 [3] ELBOW  
31. 6V-8634 [2] CONNECTOR  
32. 6V-8713 [1] CONNECTOR  
33. 6V-8724 [2] ELBOW  
34. 6V-8774 [1] TEE  
35. 6V-9003 [1] ELBOW  
36. 7J-9108 [6] SEAL-O-RING  
37. 8T-0404 [1] ELBOW  
38. 8T-4121 [29] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4133 M [2] NUT (M10X1.5-THD)  
40. 8T-4136 M [18] BOLT (M10X1.5X25-MM)  
41. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
43. 9M-8406 [2] CLIP (LOOP)  
44. 9R-1004 [12] CLIP (TAB)  
45. 9R-1005 [12] CLIP (SLOT)  
46. 9S-4185 [1] PLUG (3/4-16-THD)  
47. 6V-7744 M [12] LOCKNUT (M10X1.5-THD)  
48. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
49. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
50. 9X-2125 M [3] BOLT-LOCKING (M10X1.5X25-MM)  
51. 3S-2093 [2] STRAP-CABLE  
52. 5D-1026 [2] CLAMP-BAND  
53. 7R-4897 EB SLEEVE-ABRASION  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25500441
 

138-9796: LINES GP-COUPLER

138-9796 LINES GP-COUPLER
S/N 1XR1-2183
PART OF 139-9152, 139-9153 HYDRAULIC AR
AN ATTACHMENT
i00566212 SEBP2550
1389796 LINES GP-COUPLER Parts scheme 1389796 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7R-4897 E SLEEVE-ABRASION (112CM)  
2. 3S-2093 [2] STRAP-CABLE  
3. 5D-1026 [2] CLAMP-BAND  
4. 6V-0408 [4] SEAL-BONDED  
5. 6W-2888 [2] FITTING AS (QUICK DISCONNECT, MALE)  
6. 6W-2889 [2] FITTING AS (QUICK DISCONNECT, FEMALE)  
    (EACH INCLUDES)
  9C-6250 [1] SEAL-O-RING  
  9C-6251 [1] SEAL-O-RING  
7. 6W-2890 [4] CAP AS-DUST  
8. 6W-2891 [2] PLUG AS  
9. 2J-6540 [1] CLAMP-HOSE  
10. 112-5839 [1] TUBE AS  
11. 112-5840 [1] TUBE AS  
12. 118-4639 I [2] HOSE AS  
13. 122-6404 Y [1] CYLINDER & MTG GP-COUPLER  
14. 123-0431 I [1] HOSE AS  
15. 128-7954 [2] BLOCK  
16. 130-8692 [1] BLOCK  
17. 133-9740 [4] CONNECTOR  
18. 138-1979 Y [1] VALVE & MTG GP-SOLENOID  
19. 138-7774 I [2] HOSE AS  
20. 138-7777 I [2] HOSE AS  
21. 138-7778 I [1] HOSE AS  
22. 138-7779 I [1] HOSE AS  
23. 138-7780 [1] BLOCK  
24. 138-7781 [1] BLOCK  
25. 138-7782 [1] BLOCK  
26. 138-7783 [1] BRACKET  
27. 138-7784 [1] BRACKET  
28. 140-3057 [1] TUBE AS  
29. 140-3058 [1] TUBE AS  
30. 140-3117 [1] COVER  
31. 2M-9780 [8] SEAL-O-RING  
32. 3D-2824 [2] SEAL-O-RING  
33. 3J-1907 [5] SEAL-O-RING  
34. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
35. 6V-7732 M [4] BOLT (M10X1.5X25-MM)  
36. 6V-8397 [7] SEAL-O-RING  
37. 6V-8398 [10] SEAL-O-RING  
38. 6V-8638 [2] CONNECTOR  
39. 6V-8713 [1] CONNECTOR  
40. 6V-8715 [2] CONNECTOR  
41. 6V-8721 [2] ELBOW  
42. 6V-8724 [2] ELBOW  
43. 6V-8774 [1] TEE  
44. 6V-9187 M [2] BOLT-LOCKING (M10X1.5X60-MM)  
45. 6V-9850 [1] ELBOW  
46. 7J-9108 [2] SEAL-O-RING  
47. 8T-0404 [1] ELBOW  
48. 8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4133 M [2] NUT (M10X1.5-THD)  
50. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
51. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
52. 8T-4201 M [6] BOLT-LOCKING (M10X1.5X20-MM)  
53. 9R-1004 [14] CLIP (TAB)  
54. 9R-1005 [14] CLIP (SLOT)  
55. 9S-4191 [2] PLUG (9/16-18-THD)  
56. 142-9408 [2] FITTING  
57. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
58. 4P-7429 [1] CLIP (LADDER)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25500442
 

148-2301: LINES GP-COUPLER

148-2301 LINES GP-COUPLER
S/N 1XR1-2183
PART OF 139-9153 HYDRAULIC AR
AN ATTACHMENT
i00680016 SEBP2550
1482301 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 6W-2888 [2] FITTING AS (QUICK DISCONNECT, MALE)  
3. 6W-2890 [2] CAP AS-DUST  
4. 7K-1181 [2] STRAP-CABLE  
5. 112-5839 [1] TUBE AS  
6. 112-5840 [1] TUBE AS  
7. 112-5841 [1] TUBE AS  
8. 112-5842 [1] TUBE AS  
9. 122-6404 Y [1] CYLINDER & MTG GP-COUPLER  
10. 122-7272 [1] BLOCK  
11. 123-0431 I [1] HOSE AS  
12. 128-0180 [1] VALVE GP-DIVERTER  
13. 128-4328 [1] FILM-IDENTIFICATION  
14. 138-1979 Y [1] VALVE & MTG GP-SOLENOID  
15. 138-7779 I [1] HOSE AS  
16. 140-3117 [1] COVER  
17. 148-2302 I [1] HOSE AS  
18. 148-2303 I [1] HOSE AS  
19. 148-2304 I [1] HOSE AS  
20. 148-2305 [1] BRACKET  
21. 148-2306 [1] BRACKET  
22. 148-5367 [2] PLATE AS  
23. 148-7208 [1] COVER  
24. 148-8197 I [1] HOSE AS  
25. 151-4841 [2] BLOCK  
26. 3D-2824 [2] SEAL-O-RING  
26A. 8T-8897 [2] ADAPTER  
26B. 163-3343 [2] SEAL  
27. 168-4510 M [2] BOLT (M10X1.5X70-MM)  
28. 180-2531 I [2] HOSE AS  
29. 2M-9780 [3] SEAL-O-RING  
29A. 6V-8397 [3] SEAL-O-RING  
29B. 6V-8715 [3] CONNECTOR  
30. 6V-8398 [2] SEAL-O-RING  
30A. 6V-8633 [2] CONNECTOR  
30B. 3D-2824 [2] SEAL-O-RING  
31. 3D-2824 [1] SEAL-O-RING  
31A. 6V-8713 [1] CONNECTOR  
31B. 7J-9108 [1] SEAL-O-RING  
32. 6V-8397 [1] SEAL-O-RING  
32A. 6V-9850 [1] ELBOW  
33. 3J-1907 [1] SEAL-O-RING  
33A. 4J-5477 [1] SEAL-O-RING  
33B. 6V-8627 [1] ELBOW  
34. 6V-8397 [2] SEAL-O-RING  
34A. 3J-1907 [2] SEAL-O-RING  
34B. 6V-8724 [2] ELBOW  
35. 3D-2824 [1] SEAL-O-RING  
35A. 7J-9108 [1] SEAL-O-RING  
35B. 8T-0404 [1] ELBOW  
36. 3J-1907 [1] SEAL-O-RING  
36A. 6V-8397 [2] SEAL-O-RING  
36B. 6V-8774 [1] TEE  
37. 5P-7465 [4] CLIP (TAB)  
38. 6V-1249 [4] GROMMET (22-MM ID)(22.00MM'OD)  
39. 6V-8398 [6] SEAL-O-RING  
40. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 CM [11] BOLT (M10X1.5X25-MM)  
42. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
43. 8T-4201 M [4] BOLT-LOCKING (M10X1.5X20-MM)  
44. 8T-4646 [4] CLIP (SLOT)  
45. 9R-1004 [10] CLIP (TAB)  
46. 9R-1005 [10] CLIP (SLOT)  
47. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
  130-6905 F [1] FILM-WARNING (QUICK COUPLER PIN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25500443
 

149-1062: LINES GP-COUPLER

149-1062 LINES GP-COUPLER
S/N 1XR1-2183
FIELD INSTALLED
PART OF 144-2823 CONVERSION AR-QUICK COUPLER
AN ATTACHMENT
i00713758 SEBP2550
1491062 LINES GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  130-6905 F [1] FILM-WARNING (QUICK COUPLER PIN)  
2. 6W-2888 [2] FITTING AS (QUICK DISCONNECT, MALE)  
3. 6W-2890 [2] CAP AS-DUST  
4. 122-6404 Y [1] CYLINDER & MTG GP-COUPLER  
5. 122-7272 [1] BLOCK  
6. 123-0431 I [1] HOSE AS  
7. 128-0180 [1] VALVE GP-DIVERTER  
  128-0187 [1] KIT-HANDLE  
8. 128-4328 [1] FILM-IDENTIFICATION  
9. 138-1979 Y [1] VALVE & MTG GP-SOLENOID  
10. 138-7779 I [1] HOSE AS  
11. 140-3117 [1] COVER  
12. 148-2302 I [1] HOSE AS  
13. 148-2303 I [1] HOSE AS  
14. 148-2304 I [1] HOSE AS  
15. 148-2305 [1] BRACKET  
16. 148-2306 [1] BRACKET  
17. 148-5367 [2] PLATE AS  
  111-0483 M [1] BOSS (M10X1.5-THD)  
18. 148-7208 [1] COVER  
19. 148-8197 I [1] HOSE AS  
20. 2M-9780 [3] SEAL-O-RING  
20A. 6V-8397 [3] SEAL-O-RING  
20B. 6V-8715 [3] CONNECTOR  
21. 3D-2824 [2] SEAL-O-RING  
21A. 6V-8398 [2] SEAL-O-RING  
21B. 6V-8633 [2] CONNECTOR  
22. 6V-8397 [1] SEAL-O-RING  
22A. 6V-9850 [1] ELBOW  
23. 3J-1907 [1] SEAL-O-RING  
23A. 4J-5477 [1] SEAL-O-RING  
23B. 6V-8627 [1] ELBOW  
24. 3J-1907 [2] SEAL-O-RING  
24A. 6V-8397 [2] SEAL-O-RING  
24B. 6V-8724 [2] ELBOW  
25. 3J-1907 [1] SEAL-O-RING  
25A. 6V-8397 [2] SEAL-O-RING  
25B. 6V-8774 [1] TEE  
26. 3D-2824 [2] SEAL-O-RING  
26A. 8T-8897 [2] ADAPTER  
26B. 163-3343 [2] SEAL  
27. 5P-7465 [4] CLIP (TAB)  
28. 6V-1249 [4] GROMMET (22-MM ID)  
29. 6V-8398 [2] SEAL-O-RING  
30. 168-4510 M [2] BOLT (M10X1.5X70-MM)  
31. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
33. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
34. 3S-2093 [1] STRAP-CABLE  
35. 8T-4201 M [4] BOLT-LOCKING (M10X1.5X20-MM)  
36. 8T-4646 [4] CLIP (SLOT)  
37. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25500444
 

9R-8028: LINES GP-EXTENDABLE STICK

9R-8028 LINES GP-EXTENDABLE STICK
S/N 1XR1-2183
PART OF 122-0778 STICK AR-EXTENDABLE
AN ATTACHMENT
i00446822 SEBP2550
9R8028 LINES GP-EXTENDABLE STICK Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-8466 [1] TUBE AS  
2. 5P-0599 [1] CLAMP-BAND  
3. 9R-2004 [1] BLOCK  
4. 6V-8642 [1] CONNECTOR  
5. 6V-8626 [1] ELBOW  
6. 2M-9780 [2] SEAL-O-RING  
7. 7J-9108 [1] SEAL-O-RING  
 

#SEBP25500445
 

120-9582: LINES GP-HYDRAULIC

120-9582 LINES GP-HYDRAULIC
S/N 1XR1-2183
PART OF 120-9572 HYDRAULIC AR
i00540993 SEBP2550
1209582 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [1] SEAL-RECTANGULAR  
2. 1P-3709 [1] SEAL-RECTANGULAR  
3. 3E-7419 [1] CLAMP-HOSE  
4. 5D-1026 [2] CLAMP-BAND  
5. 6V-0484 [1] ELBOW  
6. 6V-0852 [2] CAP-DUST  
7. 6V-3965 [2] FITTING (QUICK DISCONNECT)  
8. 6V-5653 [2] ELBOW (7/8-14-THD)  
9. 5P-4868 [2] CLAMP-HOSE  
10. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
11. 101-1787 [1] TEE AS  
12. 114-4777 [1] BRACKET AS  
13. 114-5535 [1] HOSE  
14. 114-5536 [1] FLANGE  
15. 9M-8406 [2] CLIP (LOOP)  
16. 117-3232 I [1] HOSE AS  
17. 117-3235 I [1] HOSE AS  
18. 117-3240 I [1] HOSE AS  
19. 117-3244 I [1] HOSE AS  
20. 121-2903 [1] FLANGE  
21. 5P-1505 E HOSE (62CM)  
22. 2M-9780 [3] SEAL-O-RING  
23. 3D-2824 [1] SEAL-O-RING  
24. 3J-1907 [4] SEAL-O-RING  
25. 3J-7354 [2] SEAL-O-RING  
26. 4J-5477 [4] SEAL-O-RING  
27. 5K-9090 [4] SEAL-O-RING  
28. 5P-1506 E HOSE (129CM)  
29. 6V-8641 [1] CONNECTOR  
30. 6V-8647 [1] CONNECTOR  
31. 6V-8785 [1] TEE  
32. 6V-9007 [1] ELBOW  
33. 6V-9746 [2] SEAL-O-RING  
34. 6V-9849 [1] ELBOW  
35. 6V-9854 [1] ELBOW (SWIVEL)  
36. 7D-7233 [5] CLIP (LOOP)  
37. 7M-8485 [2] SEAL-O-RING  
38. 7X-2550 M [1] BOLT (M12X1.75X110-MM)  
39. 4D-7388 [1] CLIP (LOOP)  
40. 110-2445 [3] CLAMP-HOSE  
41. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4133 M [1] NUT (M10X1.5-THD)  
43. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
44. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
45. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
46. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
47. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
48. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
50. 8T-6356 [1] TEE-O-RING PORT  
51. 6V-1889 [1] CLIP (LOOP)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP25500446
 

121-8337: LINES GP-HYDRAULIC

121-8337 LINES GP-HYDRAULIC
S/N 1XR1-2183
1 CIRCUIT
PART OF 121-8283, 121-8291 BACKHOE AR-EXTENDABLE STICK, 121-8293, 121-8294, 121-8295 BACKHOE AR-STANDARD STICK, 106-6253, 119-4005 HYDRAULIC AR
AN ATTACHMENT
i00487149 SEBP2550
1218337 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-2301 [1] TUBE AS  
2. 116-2302 [1] TUBE AS  
3. 3D-2824 [2] SEAL-O-RING  
4. 6V-8398 [2] SEAL-O-RING  
5. 6V-8713 [2] CONNECTOR  
6. 7J-9108 [2] SEAL-O-RING  
7. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
9. 9R-1004 [2] CLIP (TAB)  
10. 9R-1005 [2] CLIP (SLOT)  
  M   METRIC PART
 

#SEBP25500447
 

145-4915: LINES GP-HYDRAULIC

145-4915 LINES GP-HYDRAULIC
S/N 1XR684-2183
PART OF 143-1794 HYDRAULIC AR
i00711775 SEBP2550
1454915 LINES GP-HYDRAULIC Parts scheme 1454915 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-3703 [1] SEAL-RECTANGULAR  
2. 1P-3709 [1] SEAL-RECTANGULAR (63.9MM ID)  
3. 5D-1026 [2] CLAMP-BAND  
4. 5P-4868 [2] CLAMP-HOSE  
5. 6V-0852 [1] CAP-DUST  
6. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
7. 7K-1181 [1] STRAP-CABLE  
8. 8T-6675 [1] CLAMP-HOSE  
9. 110-2445 [3] CLAMP-HOSE  
10. 114-4777 [1] BRACKET AS  
11. 114-5536 [1] FLANGE  
12. 117-3235 I [1] HOSE AS  
13. 117-3240 I [1] HOSE AS  
14. 121-2903 [1] FLANGE  
15. 138-9755 [1] HOSE  
16. 146-7276 I [1] HOSE AS  
17. 146-8958 [1] FITTING  
18. 159-0186 [4] CLAMP-HOSE  
19. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
20. 148-8352 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9854 [1] ELBOW (SWIVEL)  
21. 148-8410 [1] PLUG AS  
  2M-9780 [1] SEAL-O-RING  
  9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
22. 148-8422 [1] TEE AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-6356 [1] TEE-O-RING PORT  
23. 148-8431 [1] TEE AS  
  5K-9090 [2] SEAL-O-RING  
  6V-8785 [1] TEE  
  7M-8485 [1] SEAL-O-RING  
24. 150-3027 [2] ELBOW AS  
  2M-9780 [2] SEAL-O-RING  
  6V-5653 [2] ELBOW (7/8-14-THD)  
25. 150-3065 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-0484 [1] ELBOW  
26. 3J-1907 [2] SEAL-O-RING  
27. 4D-7388 [1] CLIP (LOOP)  
28. 5D-0718 [1] CLIP (LOOP)  
29. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
30. 6V-1889 [1] CLIP (LOOP)  
31. 7D-7233 [2] CLIP (LOOP)  
32. 7X-2550 M [1] BOLT (M12X1.75X110-MM)  
33. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4133 M [1] NUT (M10X1.5-THD)  
35. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
36. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
37. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
38. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
39. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
40. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
42. 8T-7529 [2] CLIP  
43. 9M-8406 [1] CLIP (LOOP)  
44. 5P-1505 E HOSE (70-CM)  
45. 5P-1506 E HOSE (55-CM)  
46. 136-1955 E HOSE (192-CM)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP25500448
 

146-5129: LINES GP-HYDRAULIC

146-5129 LINES GP-HYDRAULIC
S/N 1XR1-2183
PART OF 145-5894, 145-5895, 145-5896 SUPPRESSION AR-SOUND
AN ATTACHMENT
i00672927 SEBP2550
1465129 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 126-3865 [1] PLATE AS  
3. 147-2668 I [1] HOSE AS  
4. 147-2669 [1] TUBE AS  
5. 7D-7233 [1] CLIP (LOOP)  
6. 5K-9090 [1] SEAL-O-RING  
7. 6V-8785 [1] TEE  
7A. 5K-9090 [2] SEAL-O-RING  
7B. 7M-8485 [1] SEAL-O-RING  
8. 6V-9512 [1] PLUG (1-7/16-12-THD)  
8A. 5K-9090 [1] SEAL-O-RING  
9. 7M-8485 [1] SEAL-O-RING  
10. 7X-2550 M [1] BOLT (M12X1.75X110-MM)  
11. 8T-1889 [1] CLIP (SLOT)  
12. 8T-1890 [1] CLIP (TAB)  
13. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
15. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
16. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP25500449
 

146-5130: LINES GP-HYDRAULIC

146-5130 LINES GP-HYDRAULIC
S/N 1XR1-2183
PART OF 145-5892 SUPPRESSION AR-SOUND
AN ATTACHMENT
i00738634 SEBP2550
1465130 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-3865 [1] PLATE AS  
2. 145-1983 [1] TUBE AS  
3. 5K-9090 [2] SEAL-O-RING  
4. 6V-8635 [1] CONNECTOR  
5. 7M-8485 [1] SEAL-O-RING  
6. 7X-2550 M [1] BOLT (M12X1.75X110-MM)  
7. 8T-1889 [1] CLIP (SLOT)  
8. 8T-1890 [1] CLIP (TAB)  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
11. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Australia
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-CFEL
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-CSARL
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Americas
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Technical Information Bulletin
Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications
Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Asia
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Service Letter-APD
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Extendible Stick Cylinder &amp; Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Correction To Backhoe Loader C-Series Parts Manuals{7222,7567}
1997/07/28
Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25
New Stabilizer Pads Are Wider{7222}
1998/03/09
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Lubrication Of The Stabilizer Pad Pin On Backhoe Loaders {7528,7222,7581}
1999/01/25
Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28
Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20
New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04
New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05
A New Check Valve Reduces Voiding {5067, 5104}
2000/08/28
The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16
Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07
Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02
Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01
Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
New Stabilizer Pads Make Stabilizer Operation Quieter {5468, 7150, 7222}
2001/10/08
Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05
Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08
New Hydraulic Tubes Are Used in the Quick Coupler Lines Gp {5057, 5133, 6129}
2003/05/12
Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/05/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Caterpillar Parts SIS Catalog 416C :

LINES GP-BUCKET
9R-7602 LINES GP-BUCKET
LINES GP-BOOM
9R-7601 LINES GP-BOOM
LINES GP-BOOM
136-7837 LINES GP-BOOM
LINES GP-BOOM
136-7835 LINES GP-BOOM
LINES GP-BOOM
121-8343 LINES GP-BOOM
LINES GP-BOOM
121-8340 LINES GP-BOOM
LINES GP-BOOM
121-8336 LINES GP-BOOM
LINES GP-BOOM
121-5390 LINES GP-BOOM
LINES GP-COUPLER
138-9796 LINES GP-COUPLER
LINES GP-COUPLER
148-2301 LINES GP-COUPLER
LINES GP-COUPLER
149-1062 LINES GP-COUPLER
LINES GP-EXTENDABLE STICK
9R-8028 LINES GP-EXTENDABLE STICK
LINES GP-HYDRAULIC
120-9582 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
121-8337 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
145-4915 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
146-5129 LINES GP-HYDRAULIC

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.