145-6688 CRANKSHAFT GP S/N 5HK35900-UP PART OF 122-8804 ENGINE AR-PRIMARY AN ATTACHMENT 426C BACKHOE LOADER



BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP

BACKHOE LOADER 426C BACKHOE LOADER 1CR
 426C Backhoe Loader Center Pivot, Single Tilt 1CR00001-00863 (MACHINE) POWERED BY 3054 Engine SEBP2551 426C 1CR   (1996)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
145-6688 CRANKSHAFT GP
CRANKSHAFT GP
6I-0222 CRANKSHAFT GP
CRANKSHAFT GP
6I-0222 CRANKSHAFT GP
 

#SEBP25510050
 

145-6688: CRANKSHAFT GP

145-6688 CRANKSHAFT GP
S/N 5HK35900-UP
PART OF 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT
i00798734 SEBP2551
1456688 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 1B-8736 [1] KEY-WOODRUFF  
2. 4P-9948 [1] CRANKSHAFT GP  
3. 353-2205 B [1] KIT-ROD BEARING (STANDARD)  
  353-2206 AB KIT-ROD BEARING (0.25-MM US)  
  353-2207 AB KIT-ROD BEARING (0.50-MM US)  
  353-2208 AB KIT-ROD BEARING (0.75-MM US)  
4. 032-9090 B [2] WASHER-THRUST (STANDARD-UPPER)  
  067-6873 AB WASHER-THRUST (0.18-MM OS)(UPPER)  
5. 353-7427 B [1] KIT-BEARING (STANDARD)  
  353-7428 AB KIT-BEARING (0.25-MM US)  
  353-7429 AB KIT-BEARING (0.50-MM US)  
  353-7430 AB KIT-BEARING (0.75-MM US)  
6. 032-9091 B [2] WASHER-THRUST (STANDARD-LOWER)  
  067-6874 AB WASHER-THRUST (0.18-MM OS)(LOWER)  
7. 6I-0223 [1] GEAR-CRANKSHAFT (28-TEETH)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25510051
 

6I-0222: CRANKSHAFT GP

6I-0222 CRANKSHAFT GP
S/N 5HK35900-UP
PART OF 153-5364 ENGINE AR, 106-5002 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i00200728 SEBP2551
6I0222 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 1B-8736 [1] KEY-WOODRUFF  
2. 4P-9948 C [1] CRANKSHAFT GP  
3. 353-2205 B [1] KIT-ROD BEARING  
  353-2206 AB KIT-ROD BEARING (0.25-MM US)  
  353-2207 AB KIT-ROD BEARING (0.50-MM US)  
  353-2208 AB KIT-ROD BEARING (0.75-MM US)  
4. 032-9090 B [2] WASHER-THRUST (STANDARD-UPPER)  
  067-6873 AB [2] WASHER-THRUST (0.18-MM OS)  
5. 353-7427 B [1] KIT-BEARING  
  353-7428 AB KIT-BEARING (0.25-MM US)  
  353-7429 AB KIT-BEARING (0.50-MM US)  
  353-7430 AB KIT-BEARING (0.75-MM US)  
6. 032-9091 B [2] WASHER-THRUST (STANDARD-LOWER)  
  067-6874 AB [2] WASHER-THRUST (0.18-MM OS)  
7. 6I-0223 [1] GEAR-CRANKSHAFT (28-TEETH)  
    (BEARING SETS & KITS INCLUDE A COMPLETE SET OF BEARINGS FOR A CRANKSHAFT.)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25510052
 

6I-0222: CRANKSHAFT GP

6I-0222 CRANKSHAFT GP
S/N 5HK35900-UP
PART OF 106-5002 ENGINE AR-PRIMARY
AN ATTACHMENT
i00389095 SEBP2551
6I0222 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 1B-8736 [1] KEY-WOODRUFF  
2. 7C-8214 [1] CRANKSHAFT GP  
3. 353-2205 B [1] KIT-ROD BEARING  
  353-2206 AB KIT-ROD BEARING (0.25-MM US)  
  353-2207 AB KIT-ROD BEARING (0.50-MM US)  
  353-2208 AB KIT-ROD BEARING (0.75-MM US)  
4. 032-9090 B [2] WASHER-THRUST (STANDARD-UPPER)  
  067-6873 AB [2] WASHER-THRUST (0.18-MM OS)  
5. 353-7427 B [1] KIT-BEARING  
  353-7428 AB KIT-BEARING (0.25-MM US)  
  353-7429 AB KIT-BEARING (0.50-MM US)  
  353-7430 AB KIT-BEARING (0.75-MM US)  
6. 032-9091 B [2] WASHER-THRUST (STANDARD-LOWER)  
  067-6874 AB [2] WASHER-THRUST (0.18-MM OS)  
7. 6I-0501 [1] BLOCK  
8. 7W-4634 [3] BOLT (7/16-20X1.5-IN)  
9. 6I-0223 [1] GEAR-CRANKSHAFT (28-TEETH)  
    (BEARING SETS & KITS INCLUDE A COMPLETE SET OF BEARINGS FOR A CRANKSHAFT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25510053
 

127-3325: CYLINDER BLOCK GP

127-3325 CYLINDER BLOCK GP
S/N 5HK35900-61774
PART OF 145-6685 CYLINDER BLOCK GP
AN ATTACHMENT
i00516808 SEBP2551
1273325 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 1N-3762 [7] PLUG-CUP  
2. 6I-0195 [1] PLUG  
3. 101-3923 [1] PLATE  
4. 6I-1074 [4] VALVE AS (OIL JET)  
    (EACH INCLUDES)
4A. 6I-0686 [1] SPRING  
4B. 6I-1075 [1] BALL  
4C. 6I-1076 [1] RETAINER  
5. 035-8068 [10] BOLT (5/8-18X3.75-IN)  
6. 6I-0298 [1] GASKET  
7. 6I-0302 M [4] BOLT (M10X1.5X25-MM)  
8. 036-5802 [1] BEARING  
9. 067-6002 [10] DOWEL  
10. 067-6006 [1] PLUG  
11. 067-6043 [6] PLUG-SIDE  
12. 067-6805 [1] PLUG  
13. 111-1815 [4] LINER  
14. 127-9768 [1] PLUG  
15. 148-3026 [4] JET AS-PISTON COOLING  
16. 8F-2534 [1] GASKET  
  M   METRIC PART
 

#SEBP25510054
 

130-3449: CYLINDER BLOCK GP

130-3449 CYLINDER BLOCK GP
S/N 5HK35900-61774
PART OF 153-5364 ENGINE AR, 106-5002 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i00201008 SEBP2551
1303449 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 132-3874 Y [1] CYLINDER BLOCK GP  
2. 1N-3762 [2] PLUG-CUP  
3. 7W-2501 [1] PLUG  
4. 067-6808 [1] PLUG  
5. 067-9509 [1] PLUG  
6. 9Y-5015 [1] PLUG-FREEZE  
7. 112-5540 [1] HOUSING AS  
8. 4W-5360 [1] SEAL-CRANKSHAFT (REAR)  
9. 6I-0217 M [12] BOLT (M8X1.25X20-MM)  
10. 126-2231 [2] BOLT  
11. 5G-2985 [2] SPACER  
12. 6D-0044 [2] DOWEL  
13. 112-5541 [1] GASKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25510055
 

130-3449: CYLINDER BLOCK GP

130-3449 CYLINDER BLOCK GP
S/N 5HK61775-UP
PART OF 153-5364 ENGINE AR, 106-5002 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i00999357 SEBP2551
1303449 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 6I-3874 CY [1] CYLINDER BLOCK GP  
2. 1N-3762 [2] PLUG-CUP  
3. 7W-2501 [1] PLUG  
4. 067-6808 [1] PLUG  
5. 067-9509 [1] PLUG  
6. 9Y-5015 [1] PLUG-FREEZE  
7. 112-5540 [1] HOUSING AS  
8. 4W-5360 [1] SEAL-CRANKSHAFT (REAR)  
9. 6I-0217 M [12] BOLT (M8X1.25X20-MM)  
10. 126-2231 [2] BOLT  
12. 6D-0044 [2] DOWEL  
13. 112-5541 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25510056
 

132-3874: CYLINDER BLOCK GP

132-3874 CYLINDER BLOCK GP
S/N 5HK35900-61774
PART OF 130-3449 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
i00201050 SEBP2551
1323874 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 8F-2534 [1] GASKET  
2. 1N-3762 [7] PLUG-CUP  
3. 035-8068 [10] BOLT (5/8-18X3.75-IN)  
4. 036-5802 [1] BEARING  
5. 6I-0164 [4] LINER  
6. 6I-0195 [1] PLUG  
7. 067-6002 [10] DOWEL  
8. 067-6006 [1] PLUG  
9. 067-6043 [6] PLUG-SIDE  
10. 067-6805 [1] PLUG  
11. 127-9768 [1] PLUG  
12. 148-3026 [4] JET AS-PISTON COOLING  
13. 6I-1074 [4] VALVE AS (OIL JET)  
    (EACH INCLUDES)
13A. 6I-0686 [1] SPRING  
13B. 6I-1075 [1] BALL  
13C. 6I-1076 [1] RETAINER  
 

#SEBP25510057
 

145-6685: CYLINDER BLOCK GP

145-6685 CYLINDER BLOCK GP
S/N 5HK35900-61774
PART OF 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT
i00612799 SEBP2551
1456685 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 127-3325 Y [1] CYLINDER BLOCK GP  
2. 6D-0044 [2] DOWEL  
3. 7W-2501 [1] PLUG  
4. 067-6808 [1] PLUG  
5. 494-3830 [1] PLUG-FREEZE  
6. 112-5540 [1] HOUSING AS  
7. 4W-5360 [1] SEAL-CRANKSHAFT (REAR)  
8. 112-5541 [1] GASKET  
9. 6I-0217 M [12] BOLT (M8X1.25X20-MM)  
10. 126-2231 [2] BOLT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25510058
 

145-6685: CYLINDER BLOCK GP

145-6685 CYLINDER BLOCK GP
S/N 5HK61775-99999
PART OF 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT
i01025990 SEBP2551
1456685 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 152-2884 Y [1] CYLINDER BLOCK GP  
2. 6D-0044 [2] DOWEL  
3. 7W-2501 [1] PLUG  
4. 067-6808 [1] PLUG  
5. 494-3830 [1] PLUG-FREEZE  
6. 112-5540 [1] HOUSING AS  
7. 4W-5360 [1] SEAL-CRANKSHAFT (REAR)  
8. 112-5541 [1] GASKET  
9. 6I-0217 M [12] BOLT (M8X1.25X20-MM)  
10. 126-2231 [2] BOLT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25510059
 

152-2884: CYLINDER BLOCK GP

152-2884 CYLINDER BLOCK GP
S/N 5HK61775-99999
PART OF 145-6685 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@209-5562@@@@@
AN ATTACHMENT
i00800883 SEBP2551
1522884 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 1N-3762 [9] PLUG-CUP  
2. 6I-0195 [1] PLUG  
3. 6I-1074 [4] VALVE AS (OIL JET)  
    (EACH INCLUDES)
4. 6I-0686 [1] SPRING  
5. 6I-1075 [1] BALL  
6. 6I-1076 [1] RETAINER  
7. 8F-2534 [1] GASKET  
8. 9Y-5015 [1] PLUG-FREEZE  
9. 148-3026 [4] JET AS-PISTON COOLING  
10. 036-5802 [1] BEARING  
11. 067-6002 [10] DOWEL  
12. 067-6006 [1] PLUG  
13. 067-6043 [6] PLUG-SIDE  
14. 067-6805 [1] PLUG  
16. 035-8068 [10] BOLT (5/8-18X3.75-IN)  
17. 111-1815 [4] LINER  
18. 127-9768 [1] PLUG  
19. 147-1978 [2] DOWEL  
 

Information:

Specifications
Crankshaft
3054 Engine
Crankshaft Seals
3054 Engine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3054 Engine
Disassembly and Assembly
Crankshaft Pulley
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Bearing Clearance - Check
3054 Engine for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3054 Engine for Caterpillar Built Machines
Crankshaft Front Seal - Install
3054 Engine for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3054 Engine for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
3054 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3054 Engine for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install
3054 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3054 Engine for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3054 Engine for Caterpillar Built Machines
Crankshaft - Remove
3054 Engine for Caterpillar Built Machines
Crankshaft - Install
3054 Engine for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 426C :

COVER GP-VALVE MECHANISM
148-9684 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
140-8176 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
140-8176 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
161-9109 COVER GP-FRONT HOUSING
COVER GP-ACCESSORY DRIVE
6I-0643 COVER GP-ACCESSORY DRIVE
COVER GP-ACCESSORY DRIVE
133-9820 COVER GP-ACCESSORY DRIVE
CAMSHAFT GP
145-8504 CAMSHAFT GP
CAMSHAFT GP
130-3635 CAMSHAFT GP
CRANKSHAFT GP
6I-0222 CRANKSHAFT GP
CRANKSHAFT GP
6I-0222 CRANKSHAFT GP
CYLINDER BLOCK GP
127-3325 CYLINDER BLOCK GP
CYLINDER BLOCK GP
130-3449 CYLINDER BLOCK GP
CYLINDER BLOCK GP
130-3449 CYLINDER BLOCK GP
CYLINDER BLOCK GP
132-3874 CYLINDER BLOCK GP
CYLINDER BLOCK GP
145-6685 CYLINDER BLOCK GP
CYLINDER BLOCK GP
145-6685 CYLINDER BLOCK GP

Truck sale:

Caterpillar 426C
 
Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.
 
35.900 
Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung


Caterpillar 426C, Construction
22,500 
Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.
 
On Request 
Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT
Caterpillar 426C, Construction
28,000 
Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.