142-6107 WIRING GP-POWER RECEPTACLE -WARNING BEACON S/N 6XN1-3615; 1CR1-863 AN ATTACHMENT 426C BACKHOE LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 142-6107 WIRING GP-
1. 141-9887 WIRING GP-
2. 136-7436 WIRING GP-
3. 147-2732 WIRING GP-
4. 119-7022 WIRING GP-

POWER TRAIN

AXLE GP

5. 112-2113 AXLE & MTG
6. 112-9630 AXLE & MTG
7. 107-3716 AXLE & MTG
8. 107-3716 AXLE & MTG

BRAKING SYSTEM

BRAKE GP

9. 110-8631 AXLE GP-DR
0. INFORMATION

BACKHOE LOADER 426C BACKHOE LOADER 1CR
426C Backhoe Loader Center Pivot, Single Tilt 1CR00001-00863 (MACHINE) POWERED BY 3054 Engine SEBP2551 426C 1CR (1996)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

104-5969 WIRING GP-POWER RECEPTACLE

124-8958 WIRING GP-POWER RECEPTACLE

142-6107 WIRING GP-POWER RECEPTACLE

141-9887 WIRING GP-POWER SHIFT

136-7436 WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM

#SEBP25510220

142-6107: WIRING GP-POWER RECEPTACLE

WIRING GP-POWER RECEPTACLE

142-6107 WIRING GP-POWER RECEPTACLE -WARNING BEACON
S/N 6XN1-3615; 1CR1-863
AN ATTACHMENT

i00715629 SEBP2551

1426107 WIRING GP-POWER RECEPTACLE Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-5969 Y	[1]	WIRING GP-POWER RECEPTACLE
2.	142-6106	[2]	HARNESS AS-LIGHTING (WARNING BEACON, POWER RECEP)
3.	9R-7941	[1]	SOCKET AS
	9R-7980	[1]	COVER
	Y		SEPARATE ILLUSTRATION

#SEBP25510221

141-9887: WIRING GP-POWER SHIFT

WIRING GP-POWER SHIFT

141-9887 WIRING GP-POWER SHIFT
S/N 6XN1245-3615; 1CR364-863
PART OF 153-0986, 153-0987 CONTROL AR-POWER SHIFT XMSN, 140-6158 POWER TRAIN AR, 140-6159 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT

i00727850 SEBP2551

1419887 WIRING GP-POWER SHIFT Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-8679	[1]	DIODE AS-LIGHT
2.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
3.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
4.	139-4154	[1]	HARNESS AS
5.	145-6900 J	[1]	PLUG AS-CODE
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[4]	PLUG-SEAL
6.	146-9437	[1]	HARNESS AS-CONSOLE (FRONT)
7.	146-5719	[1]	HARNESS AS-CONSOLE (FRONT, FIFTH GEAR LOCKOUT)
8.	140-8477	[1]	HARNESS AS-PLATFORM
9.	142-1276	[1]	HARNESS AS-CHASSIS
10.	9R-9868	[1]	SWITCH GP-PUSH BUTTON (TRANSMISSION NEUTRALIZER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
11.	142-1277	[1]	HARNESS AS-CONSOLE (SIDE)
12.	3E-9362	[1]	RELAY AS (12-VOLT)
13.	146-8464	[1]	SWITCH AS-ROCKER (FIFTH GEAR LOCKOUT)
	111-7899	[1]	GASKET
14.	3S-2093	[30]	STRAP-CABLE
15.	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
16.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
17.	151-7453	[1]	HARNESS AS-TRANSMISSION
18.	143-8507	[1]	CONTROL GP-XMSN ELECTRONIC
19.	155-8522	[3]	MOUNT
20.	7K-1181	[1]	STRAP-CABLE
21.	6K-0806	[1]	STRAP-CABLE

			AVAILABLE REPAIR KIT(S):
	102-8806 J	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES WEDGE & RECEPTACLE ASSEMBLY)
	J		REPAIR KIT MARKED J AVAILABLE FOR PART MARKED J
	M		METRIC PART

#SEBP25510222

136-7436: WIRING GP-STABILIZER ALARM

WIRING GP-STABILIZER ALARM

136-7436 WIRING GP-STABILIZER ALARM -SIDESHIFT
S/N 6XN1-3615; 1CR1-863
AN ATTACHMENT

i00644986 SEBP2551

1367436 WIRING GP-STABILIZER ALARM Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-6876	[1]	BRACKET
2.	155-6228	[2]	PLATE
3.	142-3340	[1]	SWITCH AS-LIMIT (STABILIZER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
5.	136-7432	[1]	HARNESS AS-WIRING (STABILIZER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE & WEDGE)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL)
6.	136-7430	[1]	HARNESS AS-PANEL (STABILIZER)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7.	136-5185	[1]	ALARM-WARNING
8.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
9.	3S-2093	[20]	STRAP-CABLE
10.	136-7437	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
11.	5C-8312 M	[2]	NUT (M4X0.7-THD)
12.	4P-8134	[1]	CLIP (LADDER)
13.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
14.	106-8704	[2]	SUPPRESSOR AS-ARC
			(EACH INCLUDES)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	M		METRIC PART

#SEBP25510223

147-2732: WIRING GP-STABILIZER ALARM

WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM
S/N 6XN1245-3615; 1CR364-863
PART OF 153-0986, 153-0987 CONTROL AR-POWER SHIFT XMSN
AN ATTACHMENT

i00815442 SEBP2551

1472732 WIRING GP-STABILIZER ALARM Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-6876	[1]	BRACKET
2.	155-6228	[2]	PLATE
3.	142-3340	[1]	SWITCH AS-LIMIT (STABILIZER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
5.	3E-9362	[1]	RELAY AS (12-VOLT)
6.	147-2741	[1]	HARNESS AS-WIRING (STABILIZER)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	136-5185	[1]	ALARM-WARNING (STABILIZER)
8.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
9.	3S-2093	[10]	STRAP-CABLE
10.	136-7437	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
11.	5C-8312 M	[2]	NUT (M4X0.7-THD)
12.	4P-8134	[1]	CLIP (LADDER)
13.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
14.	147-2740	[1]	HARNESS AS-PANEL (STABILIZER)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE & WEDGE)
	M		METRIC PART

#SEBP25510224

119-7022: WIRING GP-STEERING

WIRING GP-STEERING

119-7022 WIRING GP-STEERING
S/N 1CR1-863
PART OF 119-8159, 143-2914 POWER TRAIN AR

i00202130 SEBP2551

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-6257	[1]	HARNESS AS-STEERING
2.	130-0956 Y	[5]	SENSOR GP-ARC SUPPRESSOR
3.	122-7137	[1]	LAMP (12-VOLT)
4.	129-6638	[1]	HARNESS AS-STEERING
5.	115-1970	[1]	SWITCH AS-TOGGLE
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
6.	134-9719	[1]	BRACKET
7.	113-8490	[1]	FUSE (10-AMPERE)
8.	138-8454 M	[8]	SCREW-TRUSS HEAD (M4X0.7X10-MM)
9.	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
10.	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
12.	128-5091	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	3J-1907	[1]	SEAL-O-RING
14.	3S-2093	[24]	STRAP-CABLE
15.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
16.	104-5065	[1]	BRACKET AS
17.	104-5064	[1]	COVER
18.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
19.	107-9677	[1]	SENSOR AS-POSITION (ALL WHEEL STEER)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
20.	104-5066	[1]	LEVER
21.	9R-2806	[1]	PIN
22.	9R-2807	[1]	CLIP (RETAINER)
23.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
24.	8T-0337 M	[3]	SCREW-MACHINE (M4X0.7X12-MM)
25.	4B-4863	[3]	WASHER (4.7X11X1.2-MM THK)
26.	104-5071	[1]	CLAMP AS
27.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
28.	4P-7581	[1]	CLIP (LADDER)
29.	108-1540	[1]	PLUG
30.	3E-7572	[3]	RELAY AS (12-VOLT)
31.	106-8704	[2]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
32.	7X-2533 M	[1]	BOLT (M6X1X35-MM)
33.	6V-9327 M	[1]	SETSCREW-SOCKET (M6X1-THD)
34.	130-7071	[1]	PLATE AS (LH)
35.	7K-1181	[3]	STRAP-CABLE
36.	130-0146	[1]	CONTROL GP-BUCKET POSITIONER
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	9W-0852	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
37.	128-8567	[1]	INDICATOR AS-AWS
	115-1748	[1]	LAMP (24-VOLT, 3-WATT)
	123-0306	[1]	SOCKET AS
38.	129-5078	[1]	INDICATOR AS-REAR STEERING
	4B-2043	[5]	NUT (8-32-THD)
	9B-7233	[5]	LOCKWASHER
39.	130-6255	[1]	HARNESS AS-STEERING
40.	130-6256	[1]	HARNESS AS-STEERING
41.	9W-0267	[3]	CLIP-RELAY
42.	161-2905	[1]	HARNESS AS-STEERING
43.	130-6662	[1]	FILM
44.	164-6906	[1]	FILM-INSTRUCTION (ALL WHEEL STEER)
45.	131-8360	[1]	BRACKET AS
46.	034-1432	[2]	STRAP-CABLE
47.	134-2305	[1]	SEAL
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25510225

112-2113: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

112-2113 AXLE & MTG GP-DRIVE & STEERING -REAR
S/N 1CR1-863
ALL WHEEL STEER
PART OF 118-9118, 143-1779 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00202118 SEBP2551

1122113 AXLE & MTG GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	055-1990	[1]	VENT
2.	111-1523 Y	[1]	AXLE GP-DRIVE & STEERING
3.	130-2697	[2]	VALVE-VENT
4.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
5.	8T-4131 M	[8]	NUT (M20X2.5-THD)
6.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25510226

112-9630: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

112-9630 AXLE & MTG GP-DRIVE & STEERING -FRONT
S/N 6XN1-3615; 1CR1-863
PART OF 118-9118, 118-9121, 137-6844, 143-1779, 143-1791 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00555101 SEBP2551

1129630 AXLE & MTG GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1K-7082 B	[1]	WASHER (2.266X4X0.031-IN THK)
2.	3J-1907	[2]	SEAL-O-RING
3.	8T-8549 M	[1]	LOCKNUT (M12X1.75-THD)
4.	165-8996	[2]	WASHER-THRUST (55.5X100.5X5-MM THK)(5MM)
5.	9R-9702 B	[2]	WASHER (56X100X1.6-MM THK)
6.	9S-4191	[2]	PLUG (9/16-18-THD)
7.	9X-7708	[2]	SEAL AS
8.	110-8631 Y	[1]	AXLE GP-DRIVE & STEERING
9.	112-9629	[1]	PIN
10.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
11.	106-6568	[1]	SWITCH AS (AWD)
12.	113-8490	[1]	FUSE (10-AMPERE)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25510227

107-3716: AXLE & MTG GP-REAR

AXLE & MTG GP-REAR

107-3716 AXLE & MTG GP-REAR
S/N 6XN1-1380; 6XN1383-1385; 1CR364-863
PART OF 118-9121, 118-9126, 137-6844, 143-1783, 143-1791 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00200842 SEBP2551

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-2509	[1]	PLUG
2.	107-3718 Y	[1]	AXLE GP-REAR
3.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
4.	8T-4131 M	[8]	NUT (M20X2.5-THD)
5.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25510228

107-3716: AXLE & MTG GP-REAR

AXLE & MTG GP-REAR

107-3716 AXLE & MTG GP-REAR
S/N 6XN1381-1382; 6XN1386-3615; 1CR364-863
PART OF 118-9121, 137-6844, 143-1783, 143-1791 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00779149 SEBP2551

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT
2.	156-2853 Y	[1]	AXLE GP-REAR
3.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
4.	8T-4131 M	[8]	NUT (M20X2.5-THD)
5.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25510229

110-8631: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

110-8631 AXLE GP-DRIVE & STEERING -FRONT
S/N 6XN1-3615; 1CR1-863
PART OF 112-9630 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT

i00200850 SEBP2551

1108631 AXLE GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-6108	[1]	GEAR SET-BEVEL
2.	130-3809	[1]	TIE ROD AS (RH)
3.	130-3012	[1]	TIE ROD AS (LH)
			(EACH TIE ROD AS INCLUDES)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-7043	[1]	JOINT
4.	130-3011 Y	[1]	CYLINDER GP-STEERING
5.	130-3850 B	[1]	SHIM (0.8-MM THK)
	054-6459 B	[1]	SHIM (1-MM THK)
	054-6460 B	[1]	SHIM (1.05-MM THK)
	054-6461 B	[1]	SHIM (1.1-MM THK)
	054-6462 B	[1]	SHIM (1.15-MM THK)
	054-6463 B	[1]	SHIM (1.2-MM THK)
	054-6464 B	[1]	SHIM (1.25-MM THK)
	054-6465 B	[1]	SHIM (1.3-MM THK)
	054-6466 B	[1]	SHIM (1.35-MM THK)
	054-6467 B	[1]	SHIM (1.4-MM THK)
	054-6468 B	[1]	SHIM (1.45-MM THK)
	054-6469 B	[1]	SHIM (1.5-MM THK)
	054-6470 B	[1]	SHIM (1.55-MM THK)
	054-6471 B	[1]	SHIM (1.6-MM THK)
	054-6472 B	[1]	SHIM (0.95-MM THK)
	054-6473 B	[1]	SHIM (0.9-MM THK)
	054-6474 B	[1]	SHIM (0.65-MM THK)
	054-6475 B	[1]	SHIM (0.7-MM THK)
	054-6476 B	[1]	SHIM (0.75-MM THK)
	054-6477 B	[1]	SHIM (0.85-MM THK)
6.	3N-4969	[1]	CONE-BEARING (TAPERED ROLLER)
7.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
8.	130-6689 B	[1]	RING (15.1-MM THK)
	130-6690 B	[1]	RING (15.2-MM THK)
	130-6691 B	[1]	RING (15.26-MM THK)
	130-6693 B	[1]	RING (15.3-MM THK)
	130-6694 B	[1]	RING (15.33-MM THK)
	130-6695 B	[1]	RING (15.36-MM THK)
	130-6696 B	[1]	RING (15.38-MM THK)
	130-6697 B	[1]	RING (15.4-MM THK)
	130-6698 B	[1]	RING (15.43-MM THK)
	130-6699 B	[1]	RING (15.46-MM THK)
	130-6701 B	[1]	RING (15.48-MM THK)
	130-6702 B	[1]	RING (15.5-MM THK)
	130-6703 B	[1]	RING (15.53-MM THK)
	130-6704 B	[1]	RING (15.56-MM THK)
	130-6705 B	[1]	RING (15.58-MM THK)
	130-6706 B	[1]	RING (15.6-MM THK)
	130-6707 B	[1]	RING (15.63-MM THK)
	130-6708 B	[1]	RING (15.66-MM THK)
	130-6709 B	[1]	RING (15.68-MM THK)
	130-6710 B	[1]	RING (15.7-MM THK)
	130-6711 B	[1]	RING (15.73-MM THK)
	130-6712 B	[1]	RING (15.8-MM THK)
	130-6713 B	[1]	RING (15.83-MM THK)
	130-6714 B	[1]	RING (15.86-MM THK)
	130-6715 B	[1]	RING (15.9-MM THK)
	130-6716 B	[1]	RING (15.93-MM THK)
	130-6718 B	[1]	RING (15.96-MM THK)
	130-6719 B	[1]	RING (16-MM THK)
	130-6720 B	[1]	RING (16.03-MM THK)
	130-6721 B	[1]	RING (16.06-MM THK)
	130-6722 B	[1]	RING (16.1-MM THK)
	130-6724 B	[1]	RING (16.13-MM THK)
	130-6725 B	[1]	RING (16.16-MM THK)
	130-6726 B	[1]	RING (16.2-MM THK)
	130-6727 B	[1]	RING (16.23-MM)
	130-6728 B	[1]	RING (16.26-MM THK)
	130-6729 B	[1]	RING (16.3-MM THK)
	130-6731 B	[1]	RING (16.4-MM THK)
	130-6732 B	[1]	RING (16.76-MM THK)
9.	9R-3168 M	[4]	SCREW (M10X1.5X20-MM)
10.	119-7061	[2]	PLUG
11.	130-6878	[6]	RING
12.	169-4162	[6]	CONE-BEARING
13.	169-4161	[6]	CONE-BEARING
14.	169-4160	[6]	GEAR
15.	130-7027	[2]	CARRIER
16.	119-7042	[2]	SHAFT
17.	119-7040	[2]	GEAR-RING
18.	130-3007	[2]	NUT
19.	119-7060 M	[2]	SCREW-STOP (M14X1.5X50-MM)
20.	130-7047	[16]	STUD
21.	130-3008 M	[16]	BOLT (M10X1.5X45-MM)
22.	2S-0480	[4]	CUP-TAPERED ROLLER
23.	6V-0832	[4]	CONE
24.	130-6879	[2]	SEAL
25.	9X-0640	[2]	SEAL-O-RING
26.	130-3014 Y	[1]	SHAFT GP-DRIVE (LH)
27.	130-3013 Y	[1]	SHAFT GP-DRIVE (RH)
28.	054-6589	[2]	CLIP
29.	119-7045	[2]	SEAL
30.	7X-5771	[2]	RING-RETAINING
31.	131-3816	[2]	RING
32.	119-7053	[2]	FLANGE
33.	5P-9439	[2]	BALL BEARING
34.	130-6677	[16]	BOLT (M12X1.75X30-MM)
35.	130-7026	[2]	PIN
36.	119-7038	[2]	PIN
37.	130-7008 B	[2]	SHIM (0.2-MM THK)
	130-7009 B	[2]	SHIM (0.3-MM THK)
	130-7010 B	[2]	SHIM (0.4-MM THK)
	130-7011 B	[2]	SHIM (0.6-MM THK)
	130-7012 B	[2]	SHIM (0.8-MM THK)
	130-7013 B	[2]	SHIM (1-MM THK)
	130-7015 B	[2]	SHIM (1.6-MM THK)
	130-7017 B	[2]	SHIM (2-MM THK)
38.	119-7047	[2]	SEAL
39.	119-7046	[2]	SEAL
40.	031-0426	[2]	CUP-BEARING
41.	077-3918	[2]	BEARING
42.	119-7057	[1]	HOUSING (RH)
43.	130-7031	[1]	HOUSING (LH)
44.	9R-5246	[2]	BUSHING
45.	130-6877	[2]	SEAL
46.	130-2998	[2]	BUSHING
47.	9X-0796	[1]	SEAL-O-RING
48.	130-6673	[1]	PLUG
49.	9R-3175	[1]	PLUG
50.	054-6526	[15]	DISC
51.	6V-3303 M	[15]	BOLT (M16X2X60-MM)
52.	054-6847	[1]	SEAL-O-RING
53.	6V-2200	[2]	CUP-BEARING
54.	003-7501	[2]	CONE-BEARING
55.	130-6798 B	[2]	SHIM (1-MM THK)
	130-6799 B	[2]	WASHER (1.05-MM THK)
	130-6800 B	[2]	SHIM (1.1-MM THK)
	130-6801 B	[2]	WASHER (62.2X75X1.15-MM THK)
	130-6802 B	[2]	WASHER (62.2X75X1.2-MM THK)
	130-6803 B	[2]	WASHER (62.2X75X1.25-MM THK)
	130-6804 B	[2]	SHIM (1.3-MM THK)
	130-6805 B	[2]	SHIM (1.35-MM THK)
	130-6806 B	[2]	SHIM (1.4-MM THK)
	130-6807 B	[2]	WASHER (1.45-MM THK)
	130-6808 B	[2]	SHIM (1.5-MM THK)
	130-6809 B	[2]	SHIM (1.55-MM THK)
	130-6810 B	[2]	SHIM (1.6-MM THK)
	130-6811 B	[2]	SHIM (1.65-MM THK)
	130-6812 B	[2]	SHIM (1.7-MM THK)
	130-6813 B	[2]	SHIM (1.75-MM THK)
	130-6814 B	[2]	SHIM (1.8-MM THK)
	130-6815 B	[2]	SHIM (1.85-MM THK)
	130-6816 B	[2]	SHIM (1.9-MM THK)
	130-6817 B	[2]	WASHER (62.2X75X1.95-MM THK)
	130-6818 B	[2]	WASHER (62.2X75X2-MM THK)
	130-6819 B	[2]	WASHER (62.2X75X2.05-MM THK)
	130-6820 B	[2]	SHIM (2.1-MM THK)
56.	119-7056	[1]	HOUSING (LH)
57.	119-7055	[1]	HOUSING (RH)
58.	130-6675	[1]	PIN
59.	082-3077	[4]	PIN
60.	130-3010	[4]	PIN
61.	105-3484 M	[12]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
62.	119-7036	[1]	PIN
63.	9R-6994	[2]	WASHER-THRUST
64.	128-7855	[2]	GEAR-PINION
65.	119-7035	[2]	GEAR
66.	008-1902	[3]	CONE-BEARING
67.	6S-3051	[3]	CUP-BEARING
68.	055-1986	[1]	SEAL-LIP TYPE
69.	130-7046	[1]	FLANGE
70.	130-7028	[1]	PLATE
71.	054-6480	[1]	DISC
72.	130-3005 M	[1]	NUT (M24X2-THD)
73.	130-7024	[1]	CASE
74.	130-7048 B	[2]	RING (13.5-MM THK)
	130-7049 B	[2]	RING (13.6-MM THK)
	130-7050 B	[2]	RING (13.7-MM THK)
75.	130-3000 M	[2]	WASHER (53.2X71.9X1.9-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Quick Coupler Control (Loader) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Fuses - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery or Battery Cable - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

<B>Installing a Replacement Platform Harness As on Certain Backhoe Loaders</B> {1408}
Installing a Replacement Platform Harness As on Certain Backhoe Loaders {1408}

Technical Information Bulletin

Shortened Service Life Of The Air Ride Seat Relay
Shortened Service Life Of The Air Ride Seat Relay

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
3054 Engine

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07

Improved All Wheel Drive (AWD) Switch Assembly Used In Production{1429}
1998/03/16

Correction To SENR1275 And SENR1276 Electrical Schematics {7490}
1998/06/29

Improved Cab Harness Accommodates Additional Relay {1408}
1999/05/03

New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29

A New Relay for the Air Conditioner Improves Machine Performance {1408, 7320}
2000/05/01

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
2000/07/10

A New Harness Is Available for Brooms {1408}
2000/06/05

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Improved Service Meter Used {7478}
2004/05/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 426C :

124-8958 WIRING GP-POWER RECEPTACLE

104-5969 WIRING GP-POWER RECEPTACLE

140-6078 WIRING GP-MACHINE

149-5234 WIRING GP-LOAD CONTROL

105-5153 WIRING GP-LIGHTING

119-7023 WIRING GP-LIFT VALVE

141-9887 WIRING GP-POWER SHIFT

136-7436 WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM

119-7022 WIRING GP-STEERING

112-2113 AXLE & MTG GP-DRIVE & STEERING

112-9630 AXLE & MTG GP-DRIVE & STEERING

107-3716 AXLE & MTG GP-REAR

Truck sale:

Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.

35.900

Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung

22,500

Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.

On Request

Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT

28,000

Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.