133-3363 PAD & GUARD GP-STABILIZER S/N 6XN1-3615; 1CR1-863 AN ATTACHMENT 426C BACKHOE LOADER

HYDRAULIC SYSTEM

CYLINDER GP

0. 133-3363 PAD & GUAR
1. 133-3366 PAD & GUAR

IMPLEMENTS

STABILIZER GP

2. 116-4942 PAD & MTG
3. 9R-1085 PAD & MTG
4. 9R-6007 PAD & MTG
5. 135-2876 PAD GP-STA
6. 135-2876 PAD GP-STA
7. 9R-6062 PAD GP-STA
8. 9R-6062 PAD GP-STA
9. 9R-0041 STABILIZER
0. INFORMATION

BACKHOE LOADER 426C BACKHOE LOADER 1CR
426C Backhoe Loader Center Pivot, Single Tilt 1CR00001-00863 (MACHINE) POWERED BY 3054 Engine SEBP2551 426C 1CR (1996)

HYDRAULIC SYSTEM

CYLINDER GP

9R-0036 BRACE GP-LIFT CYLINDER

133-3362 PAD & GUARD GP-STABILIZER

133-3363 PAD & GUARD GP-STABILIZER

133-3366 PAD & GUARD GP-STABILIZER

#SEBP25510540

133-3363: PAD & GUARD GP-STABILIZER

PAD & GUARD GP-STABILIZER

133-3363 PAD & GUARD GP-STABILIZER
S/N 6XN1-3615; 1CR1-863
AN ATTACHMENT

i00201060 SEBP2551

1333363 PAD & GUARD GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4986	[4]	CLAMP-HOSE
2.	9R-0424	[2]	PIN
3.	130-1638	[2]	PIN
4.	130-1640	[2]	GUARD AS
5.	141-6208	[2]	PAD-STABILIZER
6.	188-3953	[2]	PAD
7.	201-5810	[2]	PLATE
8.	201-5812	[2]	PLATE AS
9.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
10.	6V-3213	[4]	RING-RETAINING
11.	6V-8144	[4]	RING-RETAINING
12.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
13.	9R-0109	[12]	WASHER (41X64X3-MM THK)
14.	9R-0158	[8]	WASHER (46X69X3-MM THK)
	M		METRIC PART

#SEBP25510541

133-3366: PAD & GUARD GP-STABILIZER

PAD & GUARD GP-STABILIZER

133-3366 PAD & GUARD GP-STABILIZER -STREET
S/N 6XN1-3615; 1CR1-863
AN ATTACHMENT

i00201063 SEBP2551

1333366 PAD & GUARD GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4986	[4]	CLAMP-HOSE
2.	9R-0424	[2]	PIN
3.	130-1638	[2]	PIN
4.	130-1640	[2]	GUARD AS
5.	141-5150	[4]	PAD AS-STABILIZER (STREET)
6.	141-6208	[2]	PAD-STABILIZER
7.	188-3953	[2]	PAD
8.	201-5810	[2]	PLATE
9.	201-5812	[2]	PLATE AS
10.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
11.	6V-3213	[4]	RING-RETAINING
12.	6V-8144	[4]	RING-RETAINING
13.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
14.	8T-4122	[12]	WASHER-HARD (17X32X3.5-MM THK)
15.	8T-4132 M	[12]	NUT (M16X2-THD)
16.	9R-0109 B	[12]	WASHER (41X64X3-MM THK)
17.	9R-0158 B	[8]	WASHER (46X69X3-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP25510542

116-4942: PAD & MTG GP-STABILIZER

PAD & MTG GP-STABILIZER

116-4942 PAD & MTG GP-STABILIZER
S/N 6XN1-3615; 1CR1-863
AN ATTACHMENT

i00200564 SEBP2551

1164942 PAD & MTG GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-0109 BC	[12]	WASHER (41X64X3-MM THK)
2.	9R-0158 BC	[14]	WASHER (46X69X3-MM THK)
3.	9R-0422	[2]	PIN
4.	9R-0424	[2]	PIN
5.	141-6208 C	[2]	PAD-STABILIZER
6.	6V-3213	[4]	RING-RETAINING
7.	6V-8144	[4]	RING-RETAINING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP25510543

9R-1085: PAD & MTG GP-STABILIZER

PAD & MTG GP-STABILIZER

9R-1085 PAD & MTG GP-STABILIZER -STREET
S/N 6XN1-3615; 1CR1-863
AN ATTACHMENT

i00200249 SEBP2551

9R1085 PAD & MTG GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	141-5150	[4]	PAD AS-STABILIZER (STREET)
2.	8T-4132 M	[12]	NUT (M16X2-THD)
3.	9R-0424	[2]	PIN
4.	8T-4122	[12]	WASHER-HARD (17X32X3.5-MM THK)
5.	6V-3213	[4]	RING-RETAINING
6.	6V-8144	[4]	RING-RETAINING
7.	141-6208 C	[2]	PAD-STABILIZER
8.	9R-0109 BC	[8]	WASHER (41X64X3-MM THK)
9.	9R-0158 BC	[8]	WASHER (46X69X3-MM THK)
10.	9R-0422	[2]	PIN
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP25510544

9R-6007: PAD & MTG GP-STABILIZER

PAD & MTG GP-STABILIZER

9R-6007 PAD & MTG GP-STABILIZER -STREET
S/N 6XN1-3615; 1CR1-863
AN ATTACHMENT

i00200297 SEBP2551

9R6007 PAD & MTG GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-5322	[4]	PIN-COTTER
2.	6V-8144	[4]	RING-RETAINING
3.	9R-0109 B	[8]	WASHER (41X64X3-MM THK)
4.	9R-0158 B	[8]	WASHER (46X69X3-MM THK)
5.	9R-6062 Y	[2]	PAD GP-STABILIZER (STREET)
6.	130-1637	[2]	SHAFT
7.	130-1638	[2]	PIN
8.	130-1639	[4]	PLATE
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP25510545

135-2876: PAD GP-STABILIZER

PAD GP-STABILIZER

135-2876 PAD GP-STABILIZER -STREET
S/N 6XN1-3615; 1CR1-863
PART OF 133-3362 PAD & GUARD GP-STABILIZER
Type 1
AN ATTACHMENT

i00200697 SEBP2551

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5555	[2]	PAD AS-STABILIZER (STREET)
2.	130-1642	[1]	PAD AS-STABILIZER
3.	135-2568	[2]	LATCH
4.	135-2569	[2]	LATCH
5.	3S-1546	[10]	NUT-FULL (7/16-14-THD)
6.	6V-5729	[2]	LOCKNUT (7/16-14-THD)
7.	7X-0310	[2]	BOLT (7/16-14X2-IN)
8.	8T-5360	[4]	WASHER (12X22.5X2.5-MM THK)

#SEBP25510546

135-2876: PAD GP-STABILIZER

PAD GP-STABILIZER

135-2876 PAD GP-STABILIZER -STREET
S/N 6XN1-3615; 1CR1-863
PART OF 133-3362 PAD & GUARD GP-STABILIZER
Type 2
AN ATTACHMENT

i00720758 SEBP2551

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5555	[2]	PAD AS-STABILIZER (STREET)
2.	130-1642	[1]	PAD AS-STABILIZER
3.	146-1589	[2]	LATCH
4.	146-1590	[2]	LATCH
5.	6V-5729	[2]	LOCKNUT (7/16-14-THD)
6.	7X-0310	[2]	BOLT (7/16-14X2-IN)
7.	7X-0447	[8]	NUT (7/16-14-THD)
8.	8T-5360	[4]	WASHER (12X22.5X2.5-MM THK)

#SEBP25510547

9R-6062: PAD GP-STABILIZER

PAD GP-STABILIZER

9R-6062 PAD GP-STABILIZER -STREET
S/N 6XN1-3615; 1CR1-863
PART OF 9R-6007 PAD & MTG GP-STABILIZER
Type 1
AN ATTACHMENT

i00200298 SEBP2551

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5555	[2]	PAD AS-STABILIZER (STREET)
2.	130-1642	[1]	PAD AS-STABILIZER
3.	130-6978	[2]	LATCH
4.	3S-1546	[10]	NUT-FULL (7/16-14-THD)
5.	6V-5729	[2]	LOCKNUT (7/16-14-THD)
6.	7X-0310	[2]	BOLT (7/16-14X2-IN)
7.	8T-5360	[4]	WASHER (12X22.5X2.5-MM THK)

#SEBP25510548

9R-6062: PAD GP-STABILIZER

PAD GP-STABILIZER

9R-6062 PAD GP-STABILIZER -STREET
S/N 6XN1-3615; 1CR1-863
PART OF 9R-6007 PAD & MTG GP-STABILIZER
Type 2
AN ATTACHMENT

i00586733 SEBP2551

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5555	[2]	PAD AS-STABILIZER (STREET)
2.	130-1642	[1]	PAD AS-STABILIZER
3.	146-1591 C	[2]	LATCH
4.	6V-5729	[2]	LOCKNUT (7/16-14-THD)
5.	7X-0310	[2]	BOLT (7/16-14X2-IN)
6.	7X-0447	[8]	NUT (7/16-14-THD)
7.	8T-5360	[4]	WASHER (12X22.5X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP25510549

9R-0041: STABILIZER GP-BACKHOE

STABILIZER GP-BACKHOE

9R-0041 STABILIZER GP-BACKHOE
S/N 6XN1-3615; 1CR1-863
PART OF 121-3857, 143-1762, 143-1763, 8Y-8002 CHASSIS AR

i00200238 SEBP2551

9R0041 STABILIZER GP-BACKHOE Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-0109 B	[8]	WASHER (41X64X3-MM THK)
2.	9R-0158 B	[14]	WASHER (46X69X3-MM THK)
3.	9R-0423	[2]	PIN
4.	9R-0424	[2]	PIN
5.	111-4337 B	[2]	WASHER (46X70X1-MM THK)
6.	119-4594 B	[2]	WASHER (41X64X1-MM THK)
7.	130-0777	[2]	STABILIZER AS
			(EACH INCLUDES)
7A.	9R-0411	[2]	BUSHING
9.	6V-3213	[4]	RING-RETAINING
10.	6V-8144	[4]	RING-RETAINING
	B		USE AS REQUIRED

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders

Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications

Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly
Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly

Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines

THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS

Service Letter-APD

Bench Test Procedures

Disassembly and Assembly

Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Extendible Stick Cylinder & Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Service Magazine

New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11

Correction To Backhoe Loader C-Series Parts Manuals{7222,7567}
1997/07/28

Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25

New Stabilizer Pads Are Wider{7222}
1998/03/09

Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08

Lubrication Of The Stabilizer Pad Pin On Backhoe Loaders {7528,7222,7581}
1999/01/25

Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28

Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20

New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04

New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05

The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16

Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07

Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14

New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30

Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02

Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01

Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

New Stabilizer Pads Make Stabilizer Operation Quieter {5468, 7150, 7222}
2001/10/08

Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05

Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08

Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

New Swing Cylinders Improve Service Life {5105}
2005/03/21

Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/05/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Caterpillar Parts SIS Catalog 426C :

133-3362 PAD & GUARD GP-STABILIZER

8Y-7233 MOUNTING GP-STICK

9R-8039 LOCK GP-TRANSPORT

8Y-7462 LOCK GP-TRANSPORT

122-8037 LOCK GP-TRANSPORT

121-9797 LOCK GP-TRANSPORT

9R-9140 LINKAGE GP-LOADER BUCKET

9R-8131 LINKAGE GP-BACKHOE BUCKET

133-3366 PAD & GUARD GP-STABILIZER

116-4942 PAD & MTG GP-STABILIZER

9R-1085 PAD & MTG GP-STABILIZER

9R-6007 PAD & MTG GP-STABILIZER

135-2876 PAD GP-STABILIZER

9R-6062 PAD GP-STABILIZER

Truck sale:

Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.

35.900

Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung

22,500

Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.

On Request

Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT

28,000

Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.