104-9510 WIRING GP-POWER RECEPTACLE S/N 7WN1-938; 1ER1-863 PART OF 139-1921, 147-3102 CONVERSION AR-CERTIFICATION AN ATTACHMENT 426C

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 104-9510 WIRING GP-
1. 141-9887 WIRING GP-
2. 166-9301 WIRING GP-
3. 136-7436 WIRING GP-
4. 147-2732 WIRING GP-
5. 119-7022 WIRING GP-

POWER TRAIN

AXLE GP

6. 112-2113 AXLE & MTG
7. 112-9630 AXLE & MTG
8. 112-9631 AXLE & MTG
9. 119-8191 AXLE & MTG
0. INFORMATION

BACKHOE LOADER 426C BACKHOE LOADER 1ER
426C Backhoe Loader Center Pivot, Single Tilt 1ER00001-00863 (MACHINE) POWERED BY 3054 Engine SEBP2552 426C 1ER (1996)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

9R-9871 WIRING GP-MACHINE

104-5969 WIRING GP-POWER RECEPTACLE

104-9510 WIRING GP-POWER RECEPTACLE

141-9887 WIRING GP-POWER SHIFT

166-9301 WIRING GP-RIDE CONTROL

136-7436 WIRING GP-STABILIZER ALARM

#SEBP25520210

104-9510: WIRING GP-POWER RECEPTACLE

WIRING GP-POWER RECEPTACLE

104-9510 WIRING GP-POWER RECEPTACLE
S/N 7WN1-938; 1ER1-863
PART OF 139-1921, 147-3102 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i01000320 SEBP2552

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
9R-7941	[1]	SOCKET AS
9R-7980	[1]	COVER
113-8490	[1]	FUSE (10-AMPERE)

#SEBP25520211

141-9887: WIRING GP-POWER SHIFT

WIRING GP-POWER SHIFT

141-9887 WIRING GP-POWER SHIFT
S/N 7WN349-938; 1ER364-863
POWER SHIFT
PART OF 153-0986, 153-0987 CONTROL AR-POWER SHIFT XMSN, 140-6158 POWER TRAIN AR, 140-6159 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT

i00727851 SEBP2552

1419887 WIRING GP-POWER SHIFT Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-8679	[1]	DIODE AS-LIGHT
2.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
3.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
4.	139-4154	[1]	HARNESS AS (POWER)
	155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
5.	145-6900	[1]	PLUG AS-CODE
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[4]	PLUG-SEAL
6.	146-9437	[1]	HARNESS AS-CONSOLE (FRONT)(RESISTOR)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
7.	146-5719	[1]	HARNESS AS-CONSOLE (FRONT, FIFTH GEAR LOCKOUT)(DISABLE SWITCH)
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
8.	140-8477	[1]	HARNESS AS-PLATFORM (SHUTTLE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
9.	142-1276	[1]	HARNESS AS-CHASSIS (PLATFORM)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
10.	9R-9868	[1]	SWITCH GP-PUSH BUTTON (TRANSMISSION NEUTRALIZER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
11.	142-1277	[1]	HARNESS AS-CONSOLE (SIDE)(SIDE CONSOLE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
12.	3E-9362	[1]	RELAY AS (12-VOLT)
13.	146-8464	[1]	SWITCH AS-ROCKER (FIFTH GEAR LOCKOUT)
	111-7899	[1]	GASKET
14.	3S-2093	[30]	STRAP-CABLE
15.	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
16.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
17.	151-7453	[1]	HARNESS AS-TRANSMISSION
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
18.	158-2963 Y	[1]	CONTROL GP-XMSN ELECTRONIC
19.	155-8522	[3]	MOUNT
20.	7K-1181	[1]	STRAP-CABLE
21.	6K-0806	[1]	STRAP-CABLE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25520212

166-9301: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

166-9301 WIRING GP-RIDE CONTROL
S/N 7WN1-938; 1ER1-863
PART OF 163-9209 KIT-RIDE CONTROL
AN ATTACHMENT

i01085546 SEBP2552

1669301 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-4535	[1]	SWITCH AS (RIDE CONTROL)
	111-7899	[1]	GASKET
2.	163-1391	[1]	HARNESS AS-RIDE CONTROL (FRONT INSTRUMENT PANEL)
	111-7898	[1]	CONNECTOR (8-PIN)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[1]	TERMINAL-BLADE (18-GA TO 20-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	163-4531	[1]	PLATE AS (LH)
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	106-8704	[1]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	163-3137	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	197-3173	[1]	HARNESS AS-RIDE CONTROL (FRAME)
	8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
11.	145-9986	[1]	HARNESS AS-PANEL (QUICK COUPLER SWITCHES, SOL)
	111-7898	[2]	CONNECTOR (8-PIN)
	8T-8737	[1]	PLUG-SEAL
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[14]	STRAP-CABLE
	5P-4571	[1]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[5]	TERMINAL-BLADE (18-GA TO 20-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	163-4532	[1]	PLATE AS (RH)
13.	163-4533	[1]	PLATE (RH)
14.	4P-8134	[1]	CLIP (LADDER)
17.	3S-2093	[21]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP25520213

136-7436: WIRING GP-STABILIZER ALARM

WIRING GP-STABILIZER ALARM

136-7436 WIRING GP-STABILIZER ALARM
S/N 7WN1-938; 1ER1-863
PART OF 139-1921 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00644987 SEBP2552

1367436 WIRING GP-STABILIZER ALARM Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-6876	[1]	BRACKET
2.	155-6228	[2]	PLATE
3.	142-3340	[1]	SWITCH AS-LIMIT (STABILIZER LEG)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
5.	136-7432	[1]	HARNESS AS-WIRING (STABILIZER)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[13]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	136-7430	[1]	HARNESS AS-PANEL (STABILIZER)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	136-5185	[1]	ALARM-WARNING
8.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
9.	3S-2093	[20]	STRAP-CABLE
10.	136-7437	[1]	BRACKET AS
11.	5C-8312 M	[2]	NUT (M4X0.7-THD)
12.	4P-8134	[1]	CLIP (LADDER)
13.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
14.	189-3158	[2]	SUPPRESSOR-ARC
	M		METRIC PART

#SEBP25520214

147-2732: WIRING GP-STABILIZER ALARM

WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM
S/N 7WN1-938; 1ER1-863
SIDESHIFT
PART OF 153-0986, 153-0987 CONTROL AR-POWER SHIFT XMSN, 147-3102 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00672199 SEBP2552

1472732 WIRING GP-STABILIZER ALARM Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-6876	[1]	BRACKET
2.	155-6228	[2]	PLATE
3.	142-3340	[1]	SWITCH AS-LIMIT (STABILIZER LEG)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
5.	3E-9362	[1]	RELAY AS (12-VOLT)(ALARM)
6.	147-2741	[1]	HARNESS AS-WIRING (STABILIZER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	136-5185	[1]	ALARM-WARNING
8.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
9.	3S-2093	[10]	STRAP-CABLE
10.	136-7437	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
11.	5C-8312 M	[2]	NUT (M4X0.7-THD)
12.	4P-8134	[1]	CLIP (LADDER)
13.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
14.	147-2740	[1]	HARNESS AS-PANEL (STABILIZER)
	111-6795	[1]	HOUSING-RELAY
	111-6816	[1]	LOCK
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[7]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACK PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-1476	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[4]	TERMINAL-BLADE (18-GA TO 20-GA)
	M		METRIC PART

#SEBP25520215

119-7022: WIRING GP-STEERING

WIRING GP-STEERING

119-7022 WIRING GP-STEERING
S/N 1ER1-863
PART OF 119-8159, 143-2914 POWER TRAIN AR

i00796956 SEBP2552

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-6257	[1]	HARNESS AS-STEERING
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
2.	130-0956 Y	[5]	SENSOR GP-ARC SUPPRESSOR
3.	122-7137	[1]	LAMP (12-VOLT)
4.	129-6638	[1]	HARNESS AS-STEERING
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
5.	115-1970	[1]	SWITCH AS-TOGGLE
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
6.	134-9719	[1]	BRACKET
7.	113-8490	[1]	FUSE (10-AMPERE)
8.	138-8454 M	[8]	SCREW-TRUSS HEAD (M4X0.7X10-MM)
9.	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
10.	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
12.	128-5091	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	3J-1907	[1]	SEAL-O-RING
14.	3S-2093	[24]	STRAP-CABLE
15.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
16.	104-5065	[1]	BRACKET AS
17.	104-5064	[1]	COVER
18.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
19.	107-9677	[1]	SENSOR AS-POSITION (ALL WHEEL STEER)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
20.	104-5066	[1]	LEVER
21.	9R-2806	[1]	PIN
22.	9R-2807	[1]	CLIP (RETAINER)
23.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
24.	8T-0337 M	[3]	SCREW-MACHINE (M4X0.7X12-MM)
25.	4B-4863	[3]	WASHER (4.7X11X1.2-MM THK)
26.	104-5071	[1]	CLAMP AS
27.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
28.	4P-7581	[1]	CLIP (LADDER)
29.	108-1540	[1]	PLUG
30.	3E-7572	[3]	RELAY AS (12-VOLT)
31.	106-8704	[2]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
32.	7X-2533 M	[1]	BOLT (M6X1X35-MM)
33.	6V-9327 M	[1]	SETSCREW-SOCKET (M6X1-THD)
34.	130-7071	[1]	PLATE AS (LH)
35.	7K-1181	[3]	STRAP-CABLE
36.	130-0146	[1]	CONTROL GP-BUCKET POSITIONER
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	9W-0852	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
37.	128-8567	[1]	INDICATOR AS-AWS
	115-1748	[1]	LAMP (24-VOLT, 3-WATT)
	123-0306	[1]	SOCKET AS
38.	129-5078	[1]	INDICATOR AS-REAR STEERING
	4B-2043	[5]	NUT (8-32-THD)
	9B-7233	[5]	LOCKWASHER
39.	130-6255	[1]	HARNESS AS-STEERING
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
40.	130-6256	[1]	HARNESS AS-STEERING
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
41.	9W-0267	[3]	CLIP-RELAY
42.	161-2905	[1]	HARNESS AS-STEERING
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
43.	130-6662	[1]	FILM
44.	164-6906	[1]	FILM-INSTRUCTION (ALL WHEEL STEER)
45.	131-8360	[1]	BRACKET AS
46.	034-1432	[2]	STRAP-CABLE
47.	134-2305	[1]	SEAL
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25520216

112-2113: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

112-2113 AXLE & MTG GP-DRIVE & STEERING -REAR
S/N 1ER1-863
ALL WHEEL STEER
PART OF 118-9118, 143-1779 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00488056 SEBP2552

1122113 AXLE & MTG GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	055-1990	[1]	VENT
2.	111-1523 Y	[1]	AXLE GP-DRIVE & STEERING
3.	130-2697	[2]	VALVE-VENT
4.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
5.	8T-4131 M	[8]	NUT (M20X2.5-THD)
6.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25520217

112-9630: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

112-9630 AXLE & MTG GP-DRIVE & STEERING -FRONT
S/N 7WN1-938; 1ER1-863
PART OF 118-9118, 137-6844, 143-1779, 143-1791 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00555102 SEBP2552

1129630 AXLE & MTG GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1K-7082 B	[1]	WASHER (2.266X4X0.031-IN THK)
2.	3J-1907	[2]	SEAL-O-RING
3.	8T-8549 M	[1]	LOCKNUT (M12X1.75-THD)
4.	9R-9614	[2]	WASHER-THRUST
5.	9R-9702 B	[2]	WASHER (56X100X1.6-MM THK)
6.	9S-4191	[2]	PLUG (9/16-18-THD)
7.	9X-7708	[2]	SEAL AS
8.	110-8631 Y	[1]	AXLE GP-DRIVE & STEERING
9.	112-9629	[1]	PIN
10.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
11.	106-6568	[1]	SWITCH AS (AWD)
12.	113-8490	[1]	FUSE (10-AMPERE)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25520218

112-9631: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

112-9631 AXLE & MTG GP-DRIVE & STEERING -FRONT
S/N 7WN1-938; 1ER1-863
PART OF 118-9116, 118-9125, 143-1778, 143-1782, 147-9646, 147-9648, 147-9649, 147-9651 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00555103 SEBP2552

1129631 AXLE & MTG GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1K-7082	[1]	WASHER (2.266X4X0.031-IN THK)
2.	113-8490	[1]	FUSE (10-AMPERE)
3.	8T-8549 M	[1]	LOCKNUT (M12X1.75-THD)
4.	9R-9614	[2]	WASHER-THRUST
5.	9R-9702	[2]	WASHER (56X100X1.6-MM THK)
6.	148-8407	[2]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
7.	9X-7708	[2]	SEAL AS
8.	110-8632 Y	[1]	AXLE GP-DRIVE & STEERING
9.	112-9629	[1]	PIN
10.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
11.	106-6568	[1]	SWITCH AS (ALL WHEEL DRIVE)
	111-7899	[1]	GASKET
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25520219

119-8191: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

119-8191 AXLE & MTG GP-DRIVE & STEERING -REAR
S/N 1ER1-863
PART OF 118-9116, 143-1778, 147-9648, 147-9651 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00522472 SEBP2552

1198191 AXLE & MTG GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	055-1990	[1]	VENT
2.	119-8190 Y	[1]	AXLE GP-DRIVE & STEERING (REAR)
3.	130-2697	[2]	VALVE-VENT
4.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
5.	8T-4131 M	[8]	NUT (M20X2.5-THD)
6.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Quick Coupler Control (Loader) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery Electrolyte Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Auxiliary Circuit Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery or Battery Cable - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Fuses - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Loader Quick Coupler Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery or Battery Cable - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

<B>Installing a Replacement Platform Harness As on Certain Backhoe Loaders</B> {1408}
Installing a Replacement Platform Harness As on Certain Backhoe Loaders {1408}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Transmission Electronic Control Module (ECM)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switches
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Sensors
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Diagnostic Operation
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Relays
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electrical Components And Connector Locations
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Initial Troubleshooting Procedure
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using the Diagnostic Indicator to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using Electronic Control Analyzer Programmer (ECAP) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Power Supply for Electronic Control Module (Transmission) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Diagnostic Indicator - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Fifth Gear Lockout Switch - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switch (Neutralizer) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Neutral Lock Switch - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switch (Parking Brake) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electronic Control Module (ECM) - Configure
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electronic Control Module (ECM) - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

System Schematic
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Glossary of Terms
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0520 FMI 02 Transmission Configuration Incorrect - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0650 FMI 02 Harness Code Incorrect - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 03 Relay (Parking Brake) Voltage Above Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 05 Relay (Parking Brake) Current Below Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 06 Relay (Parking Brake) Current Above Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Troubleshooting Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

System Schematic
Machine Security System

Electric Starting System - Test
3054 Engine

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

Electrical Component and Connector Locations
Machine Security System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07

Improved All Wheel Drive (AWD) Switch Assembly Used In Production{1429}
1998/03/16

Correction To SENR1275 And SENR1276 Electrical Schematics {7490}
1998/06/29

Improved Cab Harness Accommodates Additional Relay {1408}
1999/05/03

New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29

A New Relay for the Air Conditioner Improves Machine Performance {1408, 7320}
2000/05/01

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
2000/07/10

A New Harness Is Available for Brooms {1408}
2000/06/05

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Improved Service Meter Used {7478}
2004/05/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 426C :

104-5969 WIRING GP-POWER RECEPTACLE

9R-9871 WIRING GP-MACHINE

140-6078 WIRING GP-MACHINE

149-5234 WIRING GP-LOAD CONTROL

105-5153 WIRING GP-LIGHTING

119-7023 WIRING GP-LIFT VALVE

141-9887 WIRING GP-POWER SHIFT

166-9301 WIRING GP-RIDE CONTROL

136-7436 WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM

119-7022 WIRING GP-STEERING

112-2113 AXLE & MTG GP-DRIVE & STEERING

112-9630 AXLE & MTG GP-DRIVE & STEERING

112-9631 AXLE & MTG GP-DRIVE & STEERING

Truck sale:

Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.

35.900

Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung

22,500

Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.

On Request

Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT

28,000

Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.