ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
AXLE GPGEAR GP
TRANSMISSION GP
CONTROL GP-BRAKE
ELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP25540360
7E-6360: WIRING GP-ENGINE
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 C | [47] | STRAP-CABLE | |
| 2. | 4P-7581 C | [6] | CLIP (LADDER) | |
| 3. | 4P-8134 | [31] | CLIP (LADDER) | |
| 4. | 9X-3495 | [1] | CLIP AS | |
| 5. | 9G-9150 | [2] | CLIP | |
| 6. | 4P-7428 | [4] | CLIP (LADDER) | |
| 7. | 5P-8245 C | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 5M-2894 | [13] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 0S-0509 | [7] | BOLT (3/8-16X0.75-IN) | |
| 10. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 11. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 12. | 7P-8672 | [1] | PLATE | |
| 13. | 1K-6705 | [1] | BOLT (1/2-13X0.5-IN) | |
| 14. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 15. | 112-6583 C | [1] | HARNESS AS-WIRING | |
| 16. | 105-4471 | [1] | HARNESS AS-WIRING (JUMPER, CRANK WITHOUT INJECT) | |
| 17. | 2V-3216 | [1] | CLIP (LOOP) | |
| 18. | 4P-7429 | [2] | CLIP (LADDER) | |
| 19. | 3H-7654 C | [1] | WASHER-HARD (13.5X22.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25540361
7E-6360: WIRING GP-ENGINE
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 C | [62] | STRAP-CABLE | |
| 2. | 4P-7581 C | [6] | CLIP (LADDER) | |
| 3. | 4P-8134 C | [35] | CLIP (LADDER) | |
| 4. | 9X-3495 | [1] | CLIP AS | |
| 5. | 8N-0869 | [1] | COVER-TERMINAL (RED) | |
| 6. | 4P-7428 C | [3] | CLIP (LADDER) | |
| 7. | 5P-8245 C | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 5M-2894 C | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 0S-0509 | [7] | BOLT (3/8-16X0.75-IN) | |
| 10. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| 11. | 8F-8544 C | [1] | BOLT (3/8-16X6.25-IN) | |
| 12. | 167-9551 C | [1] | HARNESS AS-ENGINE | |
| 6I-4347 | [27] | BOOT (4-PIN) | ||
| 6I-4349 | [1] | BOOT (70-PIN) | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 112-3587 | [1] | BOOT (40-PIN) | ||
| 100-5805 | [2] | CAP-RECEPTACLE (3-PIN) | ||
| 3T-3045 | [1] | CLIP AS | ||
| 7N-9737 | [3] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-7781 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-9738 | [2] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 1H-4560 | [1] | BOOT-SPARK PLUG | ||
| 7N-7780 | [5] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 8N-1544 | [1] | PIN-CONNECTOR (8-GA) | ||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [57] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4391 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-5615 | [2] | SEAL (INTERFACE, 70-PIN) | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5485 | [2] | PLUG AS-CONNECTOR (1-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [17] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S), INTERFACE SEAL) | ||||
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8737 | [38] | PLUG-SEAL | ||
| 7G-7919 | [2] | PLUG-SEAL | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 9G-3695 | [4] | PLUG-SEAL | ||
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 113-0580 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 106-4155 | [1] | KIT-RETAINING BOLT | ||
| (INCLUDES BOLT, RING & SEALS) | ||||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 127-5486 | [2] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 8T-8732 | [6] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 3E-7842 | [2] | RESISTOR AS | ||
| (EACH INCLUDES) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (5-CM) | |||
| 8N-1545 | [1] | SOCKET-CONNECTOR (8-GA) | ||
| 7N-7779 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [91] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9G-9314 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 9G-4344 | [1] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 2L-8049 | [2] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| -OR- | ||||
| 2L-8057 | [2] | TERMINAL-RING (8-GA, NO. 10 SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 2L-8081 | [4] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 13. | 0S-1594 C | [1] | BOLT (3/8-16X1-IN) | |
| 14. | 0S-1621 C | [1] | BOLT (1/2-13X1-IN) | |
| 15. | 105-4471 | [1] | HARNESS AS-WIRING (JUMPER, CRANK WITHOUT INJECT) | |
| 9G-9153 | [1] | CLIP | ||
| 7N-7782 | [2] | HOUSING-PLUG (14-GA TO 18-GA) | ||
| 7N-7781 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 7N-7780 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 9G-3695 | [5] | PLUG-SEAL | ||
| 7N-7779 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 16. | 2V-3216 | [1] | CLIP (LOOP) | |
| 17. | 4P-7429 C | [5] | CLIP (LADDER) | |
| 18. | 135-2543 | [3] | BOOT (RED) | |
| 19. | 9U-2277 C | [1] | CLIP AS | |
| 20. | 2A-4781 C | [2] | BOLT (1/4-20X2.75-IN) | |
| 21. | 9X-6165 C | [2] | WASHER (6.5X22X2.5-MM THK) | |
| 22. | 166-8418 C | [1] | BRACKET | |
| 23. | 4T-8338 C | [1] | PLATE | |
| 24. | 116-0118 C | [1] | CLIP | |
| 25. | 9S-8752 C | [1] | NUT-FULL (3/8-16-THD) | |
| 26. | 193-9141 | [1] | COVER-TERMINAL | |
| 27. | 299-5181 | [1] | CLIP | |
| 28. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 29. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP25540362
129-7252: WIRING GP-PLATFORM
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-6264 | [1] | GROMMET | |
| 2. | 134-0986 | [1] | PLUG AS | |
| 3E-3386 | [1] | WEDGE-PLUG LOCK | ||
| 9G-3695 | [5] | PLUG-SEAL | ||
| 186-3736 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 131-5398 | [1] | HARNESS AS (DASH) | |
| 4. | 4M-5281 | [3] | BOLT (1/4-20X0.75-IN) | |
| 5. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 6. | 132-6999 Y | [1] | WIRING GP-CONSOLE | |
| 7. | 5P-5901 BD | SEAL | ||
| 8. | 131-5399 | [1] | HARNESS AS (PEDESTAL) | |
| 9. | 3E-6328 Y | [1] | ALARM GP (24-VOLT)(ACTION) | |
| 10. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 11. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 5F-9757 | [1] | GROMMET | |
| 13. | 6V-8927 | [12] | BOLT-SOCKET HEAD (6-32X0.5-IN) | |
| 14. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 15. | 4P-7581 | [4] | CLIP (LADDER) | |
| 16. | 8T-9367 | [2] | BOLT (1/4-20X2-IN) | |
| 17. | 103-5526 Y | [1] | CONTROL GP-MONITOR (BACKLIGHT DIMMER) | |
| 18. | 7N-5876 | [4] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 19. | 6T-5814 | [1] | SWITCH AS-ROCKER (FRONT LIGHTS) | |
| 3L-8187 | [4] | LOCKWASHER | ||
| 6V-8374 | [4] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 20. | 6T-3990 | [1] | SWITCH AS-ROCKER (SIDE LIGHTS) | |
| 3L-8187 | [2] | LOCKWASHER | ||
| 6V-8374 | [2] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 21. | 6T-5814 | [1] | SWITCH AS-ROCKER (REAR LIGHTS) | |
| 3L-8187 | [4] | LOCKWASHER | ||
| 6V-8374 | [4] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 22. | 6T-6066 | [1] | SWITCH AS-ROCKER (OPERATOR) | |
| 3L-8187 | [2] | LOCKWASHER | ||
| 6V-8374 | [2] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 23. | 6T-3990 | [1] | SWITCH AS-ROCKER (AUXILIARY) | |
| 3L-8187 | [2] | LOCKWASHER | ||
| 6V-8374 | [2] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 24. | 3E-7393 | [1] | SWITCH AS (START AID) | |
| 3L-8187 | [6] | LOCKWASHER | ||
| 6V-8374 | [6] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 25. | 119-1733 | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT) | |
| 26. | 9X-2498 | [2] | SCREW-HEX FLANGE (10-24X0.5-IN) | |
| 27. | 136-3315 | [1] | SEAL | |
| 28. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 29. | 102-9235 | [1] | SOCKET AS-POWER (24-VOLT OUTLET) | |
| 30. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 31. | 3T-2357 | [1] | SWITCH GP-PUSH BUTTON (HORN) | |
| 3B-4501 | [1] | LOCKWASHER | ||
| 5L-7200 | [1] | SCREW (8-32X0.375-IN) | ||
| 7T-9515 | [1] | KNOB-HORN | ||
| 32. | 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | |
| 2H-3922 | [1] | LOCKWASHER | ||
| 33. | 9X-0199 | [1] | BOOT-SWITCH | |
| 34. | 6V-8363 | [2] | SCREW (10-32X0.312-IN) | |
| 8F-1434 | [2] | LOCKWASHER | ||
| 35. | 2G-1133 | [1] | GROMMET | |
| 36. | 103-4722 | [1] | HARNESS AS (CONSOLE, RH) | |
| 37. | 6P-6641 | [1] | GROMMET | |
| 38. | 122-2738 | [1] | RETAINER | |
| 39. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 40. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 41. | 3P-3839 | [1] | GROMMET | |
| 42. | 125-4490 | [1] | CLIP | |
| 43. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 44. | 4M-5281 | [2] | BOLT (1/4-20X0.75-IN) | |
| 45. | 3E-9044 | [1] | SWITCH AS-ROCKER (24-VOLT)(THROTTLE) | |
| 3E-8825 | [2] | LAMP (24-VOLT) | ||
| 6V-1748 | [1] | ACTUATOR | ||
| 105-9149 | [1] | SWITCH AS (24-VOLT) | ||
| 1S-9593 BF | [10] | STRAP-CABLE | ||
| 7K-1181 BF | [10] | STRAP-CABLE | ||
| 9X-6772 BF | [30] | STRAP-CABLE | ||
| 131-3916 FJ | [1] | PLUG AS-CODE (POWER TRAIN) | ||
| 102-8805 F | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3383 F | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 5P-5677 DF | WIRE (18-GA, BLACK)(.2M) | |||
| 8T-8729 F | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 F | [4] | PLUG-SEAL | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| F | NOT SHOWN | |||
| J | CODE PLUG FOR FINGER TIP CONTROL CONSOLE HARNESS | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25540363
140-9920: AXLE GP
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP25540364
9W-0408: AXLE GP
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP25540365
259-1032: BEARING GP-POWER TRAIN
259-1032 BEARING GP-POWER TRAIN
S/N 8ZR1-UP
CONTAINS ANTI-FRICTION BEARINGS, SLEEVE BEARINGS/BUSHINGS. METAL SEAL RINGS, THRUST WASHERS/THRUST DISCS. ROLL PINS/SPRING PINS, BEARING LOCATOR DOWELS & DOWEL HOLE CAPS
FIELD REPLACEMENT FOR 128-8637 KIT-BEARING
FOR USE WITH @@@@@116-9770@@@@@
FIELD INSTALLATION
S/N 8ZR1-UP
CONTAINS ANTI-FRICTION BEARINGS, SLEEVE BEARINGS/BUSHINGS. METAL SEAL RINGS, THRUST WASHERS/THRUST DISCS. ROLL PINS/SPRING PINS, BEARING LOCATOR DOWELS & DOWEL HOLE CAPS
FIELD REPLACEMENT FOR 128-8637 KIT-BEARING
FOR USE WITH @@@@@116-9770@@@@@
FIELD INSTALLATION
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-1669 | [1] | BALL BEARING | ||
| 5P-6727 | [1] | BALL BEARING | ||
| 148-6559 | [1] | BALL BEARING | ||
| 212-5023 | [2] | BALL BEARING | ||
| 5M-7925 | [4] | BEARING AS-ROLLER | ||
| 1T-0766 | [2] | BUSHING | ||
| 8H-8175 | [3] | BUSHING | ||
| 9S-6729 | [1] | BUSHING | ||
| 8E-8310 | [8] | DISC-THRUST | ||
| 8E-8316 | [24] | DISC-THRUST | ||
| 4S-8537 | [2] | DOWEL | ||
| 4S-8541 | [2] | DOWEL | ||
| 2H-9445 | [8] | PIN-SPRING | ||
| 3S-2708 | [9] | PIN-SPRING | ||
| 7M-5130 | [1] | PIN-SPRING | ||
| 4H-7925 | [1] | RING-METAL SEAL | ||
| 6F-0155 | [2] | RING-METAL SEAL | ||
| 3S-8035 | [2] | RING-SEAL | ||
| 1S-9110 | [8] | ROLLER AS | ||
| 1P-3958 | [8] | ROLLER AS-SPECIAL |
#SEBP25540366
116-5920: CASE & PARTS GP-PLANETARY
116-5920 CASE & PARTS GP-PLANETARY
S/N 9KX1-99999
PART OF 116-9770 TRANSMISSION AR
S/N 9KX1-99999
PART OF 116-9770 TRANSMISSION AR
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-4928 | [1] | COVER | |
| 2. | 8E-4929 | [1] | GASKET | |
| 3. | 132-9877 | [2] | ADAPTER | |
| 4. | 4K-1388 | [2] | SEAL-O-RING | |
| 5. | 132-9875 | [1] | COVER AS | |
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 6. | 8E-7249 | [1] | GASKET | |
| 7. | 8M-4986 | [2] | SEAL-O-RING | |
| 8. | 9X-8885 | [23] | BOLT (3/4-10X2.25-IN) | |
| 9. | 5P-8248 | [23] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 10. | 7S-8554 | [1] | SEAL-O-RING | |
| 11. | 5P-1404 | [2] | ADAPTER | |
| 12. | 2M-9780 | [2] | SEAL-O-RING | |
| 13. | 6V-3965 | [3] | FITTING (QUICK DISCONNECT) | |
| 14. | 3J-1907 | [11] | SEAL-O-RING | |
| 15. | 6V-0852 | [3] | CAP-DUST | |
| 16. | 9S-4191 | [4] | PLUG (9/16-18-THD) | |
| 17. | 0T-0065 | [4] | BOLT (3/8-16X3.5-IN) | |
| 18. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8M-4992 | [2] | SEAL-O-RING | |
| 20. | 0L-1351 | [14] | BOLT (3/8-16X0.875-IN) | |
| 21. | 3P-7739 | [1] | MANIFOLD | |
| 22. | 143-4621 | [1] | CASE AS | |
| 8P-0618 | [1] | TUBE | ||
| 23. | 4B-4043 | [5] | BOLT (5/8-11X1.375-IN) | |
| 24. | 131-4094 | [1] | MANIFOLD | |
| 25. | 1H-5728 | [1] | SEAL-O-RING | |
| 26. | 9M-6267 | [1] | COVER | |
| 27. | 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | |
| 28. | 0S-1621 | [4] | BOLT (1/2-13X1-IN) | |
| 29. | 9M-9647 | [1] | SEAL-O-RING | |
| 30. | 5D-6176 | [1] | COVER | |
| 31. | 9S-1018 | [12] | WASHER (9.73X19.05X0.84-MM THK) | |
| 32. | 3S-0004 | [6] | WASHER (0.406X0.728X0.09-IN THK) | |
| 33. | 0S-1608 | [10] | BOLT (3/8-16X3.75-IN) | |
| 34. | 8E-1717 | [2] | ADAPTER | |
| 35. | 8E-7253 | [2] | SLEEVE | |
| 36. | 8M-8157 | [4] | SEAL-O-RING | |
| 37. | 6V-8077 | [2] | ELBOW |
#SEBP25540367
115-7411: CONTROL GP-BRAKE
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-8859 | [1] | HOUSING | |
| 2. | 117-9758 | [1] | SHAFT | |
| 3. | 7G-8420 | [1] | PEDAL | |
| 4. | 8T-8919 | [1] | BOLT (1/2-13X1.75-IN) | |
| 5. | 118-0289 | [1] | LEVER | |
| 6. | 1B-8714 | [1] | KEY-WOODRUFF | |
| 7. | 7X-0288 | [1] | BOLT (3/8-16X1.625-IN) | |
| 8. | 8T-4167 | [1] | WASHER-HARD (26X44X4-MM THK) | |
| 9. | 9S-6465 | [1] | BEARING-ROLLER | |
| 10. | 8F-5340 | [1] | SEAL-LIP TYPE | |
| 11. | 7P-4190 | [1] | BEARING-ROLLER | |
| 12. | 112-7686 | [1] | HARNESS AS-SWITCH (BRAKE) | |
| 13. | 6V-7607 | [1] | WASHER-HARD (20X30X2.5-MM THK) | |
| 14. | 2J-6356 | [1] | RING-RETAINING | |
| 15. | 9G-5209 | [1] | BRACKET | |
| 16. | 5D-0353 | [2] | BOLT-LOCKING (3/8-16X1-IN) | |
| 17. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 9G-5212 | [1] | LINK | |
| 19. | 7T-0905 | [2] | BOLT-ANCHOR | |
| 20. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 9G-5211 | [2] | SPACER (12.95X19.05X9-MM THK) | |
| 22. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| 23. | 9G-5213 | [1] | SPRING | |
| 24. | 9X-5592 Y | [1] | SENSOR GP-POSITION (BRAKE) | |
| 25. | 2N-3162 | [2] | SCREW-MACHINE (10-24X1.25-IN) | |
| 26. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 27. | 117-9783 | [1] | PLATE | |
| 28. | 132-7077 | [1] | SWITCH AS-LIMIT (BRAKE) | |
| 6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 29. | 9X-6281 | [2] | SCREW-MACHINE (4-40X1-IN) | |
| 30. | 096-5962 | [4] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 31. | 6B-4540 | [2] | NUT (4-40-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25540368
115-7411: CONTROL GP-BRAKE
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 148-3663 C | [1] | HOUSING | |
| 2. | 117-9758 | [1] | SHAFT | |
| 3. | 7G-8420 | [1] | PEDAL | |
| 4. | 8T-8919 | [1] | BOLT (1/2-13X1.75-IN) | |
| 5. | 148-3664 C | [1] | LEVER | |
| 6. | 1B-8714 | [1] | KEY-WOODRUFF | |
| 7. | 7X-0288 | [1] | BOLT (3/8-16X1.625-IN) | |
| 8. | 8T-4167 | [1] | WASHER-HARD (26X44X4-MM THK) | |
| 9. | 9S-6465 | [1] | BEARING-ROLLER | |
| 10. | 8F-5340 | [1] | SEAL-LIP TYPE | |
| 11. | 7P-4190 | [1] | BEARING-ROLLER | |
| 12. | 112-7686 | [1] | HARNESS AS-SWITCH (BRAKE) | |
| 13. | 6V-7607 | [1] | WASHER-HARD (20X30X2.5-MM THK) | |
| 14. | 2J-6356 | [1] | RING-RETAINING | |
| 15. | 9G-5209 | [1] | BRACKET | |
| 16. | 5D-0353 | [2] | BOLT-LOCKING (3/8-16X1-IN) | |
| 17. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 9G-5212 | [1] | LINK | |
| 19. | 7T-0905 | [2] | BOLT-ANCHOR | |
| 20. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 9G-5211 | [2] | SPACER (12.95X19.05X9-MM THK) | |
| 22. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| 23. | 9G-5213 | [1] | SPRING | |
| 24. | 9X-5592 Y | [1] | SENSOR GP-POSITION (BRAKE) | |
| 25. | 2N-3162 | [2] | SCREW-MACHINE (10-24X1.25-IN) | |
| 26. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 27. | 148-2712 C | [1] | PLATE | |
| 28. | 132-7077 | [1] | SWITCH AS-LIMIT (BRAKE) | |
| 6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 29. | 9X-6281 | [2] | SCREW-MACHINE (4-40X1-IN) | |
| 30. | 096-5962 | [4] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 31. | 148-2713 C | [1] | PLATE | |
| 32. | 7J-9018 C | [2] | BOLT-SOCKET HEAD (10-24X0.625-IN) | |
| 33. | 8T-0328 C | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 34. | 148-2714 C | [1] | SPRING | |
| 35. | 9M-5731 C | [1] | RIVET-POP | |
| 36. | 106-5472 CM | [1] | SETSCREW-HEX SOCKET (M5X0.8X20-MM) | |
| 37. | 2B-0858 C | [1] | PLUG-PIPE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25540369
115-7411: CONTROL GP-BRAKE
Parts for your D11R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 148-3663 | [1] | HOUSING | |
| 2. | 117-9758 | [1] | SHAFT | |
| 3. | 7G-8420 | [1] | PEDAL | |
| 4. | 8T-8919 | [1] | BOLT (1/2-13X1.75-IN) | |
| 5. | 148-3664 | [1] | LEVER | |
| 6. | 1B-8714 | [1] | KEY-WOODRUFF | |
| 7. | 7X-0288 | [1] | BOLT (3/8-16X1.625-IN) | |
| 8. | 8T-4167 | [1] | WASHER-HARD (26X44X4-MM THK) | |
| 9. | 9S-6465 | [1] | BEARING-ROLLER | |
| 10. | 8F-5340 | [1] | SEAL-LIP TYPE | |
| 11. | 7P-4190 | [1] | BEARING-ROLLER | |
| 12. | 112-7686 | [1] | HARNESS AS-SWITCH (BRAKE) | |
| 13. | 6V-7607 | [1] | WASHER-HARD (20X30X2.5-MM THK) | |
| 14. | 2J-6356 | [1] | RING-RETAINING | |
| 15. | 9G-5209 | [1] | BRACKET | |
| 16. | 5D-0353 | [2] | BOLT-LOCKING (3/8-16X1-IN) | |
| 17. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 9G-5212 | [1] | LINK | |
| 19. | 7T-0905 | [2] | BOLT-ANCHOR | |
| 20. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 9G-5211 | [2] | SPACER (12.95X19.05X9-MM THK) | |
| 22. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| 23. | 9G-5213 | [1] | SPRING | |
| 24. | 147-1680 CY | [1] | SENSOR GP-POSITION (ROTARY)(BRAKE) | |
| 25. | 2N-3162 | [2] | SCREW-MACHINE (10-24X1.25-IN) | |
| 26. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 27. | 148-2712 | [1] | PLATE | |
| 28. | 132-7077 | [1] | SWITCH AS-LIMIT (BRAKE) | |
| 6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 29. | 9X-6281 | [2] | SCREW-MACHINE (4-40X1-IN) | |
| 30. | 096-5962 | [4] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 31. | 148-2713 | [1] | PLATE | |
| 32. | 7J-9018 | [2] | BOLT-SOCKET HEAD (10-24X0.625-IN) | |
| 33. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 34. | 148-2714 | [1] | SPRING | |
| 35. | 9M-5731 | [2] | RIVET-POP | |
| 36. | 106-5472 M | [1] | SETSCREW-HEX SOCKET (M5X0.8X20-MM) | |
| 37. | 2B-0858 | [1] | PLUG-PIPE | |
| 38. | 6V-0894 | [1] | SEAL-O-RING | |
| 39. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog D11R :
Truck sale:
1,600,000
Caterpillar D11R REBUILD, Crawler dozers, Construction
- Crawler dozers
CARTER MACHINERY COMPANY, INC.
- Crawler dozers
CARTER MACHINERY COMPANY, INC.




