BASIC ENGINE
CYLINDER BLOCK GPBASIC ENGINE
CYLINDER BLOCK GP#SEBP25550060
137-8468: CYLINDER BLOCK GP
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS#SEBP25550061
137-8469: CYLINDER BLOCK GP
137-8469 CYLINDER BLOCK GP
S/N 9WR489-2067
FIELD REPLACEMENT FOR @@@@@150-8016@@@@@
S/N 9WR489-2067
FIELD REPLACEMENT FOR @@@@@150-8016@@@@@
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6757 | [1] | PLUG-PIPE | |
| 2. | 3E-6747 | [2] | SEAL-O-RING | |
| 3. | 7W-6492 | [4] | PLUG-PIPE (1/2-14-THD) | |
| 4. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 5. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 6. | 114-4427 | [1] | SEAL-O-RING | |
| 7. | 7X-7732 | [6] | PLUG-PIPE | |
| 8. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 9. | 9X-7378 | [1] | SEAL-O-RING | |
| 10. | 100-7399 | [2] | PLUG | |
| 11. | 137-8468 Y | [1] | CYLINDER BLOCK GP | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25550062
137-8469: CYLINDER BLOCK GP
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6757 | [1] | PLUG-PIPE | |
| 2. | 202-1254 CY | [1] | CYLINDER BLOCK GP | |
| 3. | 7W-6492 | [4] | PLUG-PIPE (1/2-14-THD) | |
| 4. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 5. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 6. | 114-4427 | [1] | SEAL-O-RING | |
| 7. | 7X-7732 | [6] | PLUG-PIPE | |
| 8. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 9. | 9X-7378 | [1] | SEAL-O-RING | |
| 10. | 100-7399 | [2] | PLUG | |
| 11. | 250-0466 | [2] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25550063
145-8859: CYLINDER BLOCK GP
145-8859 CYLINDER BLOCK GP
S/N 9WR1-488
S/N 9WR1-488
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 145-6860 | [6] | JET AS-PISTON COOLING | |
| 2. | 137-2671 Y | [1] | CYLINDER BLOCK AS | |
| 3. | 1S-9540 | [1] | DOWEL | |
| 4. | 5P-0840 | [1] | SEAL-O-RING | |
| 5. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
| 6. | 6I-1055 | [1] | DOWEL | |
| 7. | 4N-0683 | [4] | DOWEL | |
| 8. | 4N-1650 | [1] | DOWEL | |
| 9. | 6I-4421 | [1] | PLATE-SPACER | |
| 10. | 133-9827 | [1] | GASKET-PLATE | |
| 11. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 12. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 13. | 114-4427 | [1] | SEAL-O-RING | |
| 14. | 7X-7732 | [5] | PLUG-PIPE | |
| 15. | 150-1156 | [6] | BOLT-SPECIAL (OIL JET) | |
| 16. | 111-2350 | [1] | SENSOR GP-PRESSURE (OIL) | |
| 17. | 3B-7722 | [1] | BUSHING-PIPE | |
| 18. | 5N-2126 | [1] | CONNECTOR (THERMOCOUPLE) | |
| 19. | 6V-5048 | [1] | SEAL-O-RING | |
| 20. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 21. | 9X-7378 | [1] | SEAL-O-RING | |
| 22. | 100-7399 | [2] | PLUG | |
| 23. | 3E-6747 | [2] | SEAL-O-RING | |
| 24. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25550064
150-8016: CYLINDER BLOCK GP
150-8016 CYLINDER BLOCK GP
S/N 9WR489-2067
FIELD REPLACEMENT ORDER @@@@@137-8469@@@@@
S/N 9WR489-2067
FIELD REPLACEMENT ORDER @@@@@137-8469@@@@@
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-8467 Y | [1] | CYLINDER BLOCK GP | |
| 2. | 1S-9540 | [1] | DOWEL | |
| 3. | 5P-0840 | [1] | SEAL-O-RING | |
| 4. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
| 5. | 6I-1055 | [1] | DOWEL | |
| 6. | 4N-0683 | [4] | DOWEL | |
| 7. | 4N-1650 | [1] | DOWEL | |
| 8. | 6I-4421 | [1] | PLATE-SPACER | |
| 9. | 180-5734 | [1] | GASKET-PLATE | |
| 10. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 11. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 12. | 114-4427 | [1] | SEAL-O-RING | |
| 13. | 7X-7732 | [5] | PLUG-PIPE | |
| 14. | 161-9930 Y | [1] | SENSOR GP-PRESSURE (OIL) | |
| 15. | 6V-5048 | [1] | SEAL-O-RING | |
| 16. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 17. | 9X-7378 | [1] | SEAL-O-RING | |
| 18. | 100-7399 | [2] | PLUG | |
| 19. | 3E-6747 | [2] | SEAL-O-RING | |
| 20. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | |
| 21. | 142-2329 | [1] | SEAL | |
| 22. | 3E-7448 | [1] | CONNECTOR | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25550065
150-8016: CYLINDER BLOCK GP
150-8016 CYLINDER BLOCK GP
S/N 9WR2068-9999
FIELD REPLACEMENT ORDER @@@@@137-8469@@@@@
S/N 9WR2068-9999
FIELD REPLACEMENT ORDER @@@@@137-8469@@@@@
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 202-1261 CY | [1] | CYLINDER BLOCK GP | |
| 2. | 1S-9540 | [1] | DOWEL | |
| 3. | 5P-0840 | [1] | SEAL-O-RING | |
| 4. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
| 5. | 6I-1055 | [1] | DOWEL | |
| 6. | 4N-0683 | [4] | DOWEL | |
| 7. | 4N-1650 | [1] | DOWEL | |
| 8. | 6I-4421 | [1] | PLATE-SPACER | |
| 9. | 227-1204 | [1] | GASKET | |
| 10. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 11. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 12. | 114-4427 | [1] | SEAL-O-RING | |
| 13. | 7X-7732 | [5] | PLUG-PIPE | |
| 14. | 218-3840 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 15. | 6V-5048 | [1] | SEAL-O-RING | |
| 16. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 17. | 9X-7378 | [1] | SEAL-O-RING | |
| 18. | 100-7399 | [2] | PLUG | |
| 19. | 250-0466 | [2] | SEAL-O-RING | |
| 20. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | |
| 21. | 142-2329 | [1] | SEAL | |
| 22. | 3E-7448 | [1] | CONNECTOR | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25550066
202-1254: CYLINDER BLOCK GP
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS#SEBP25550067
202-1261: CYLINDER BLOCK GP
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 197-9322 | [6] | LINER-CYLINDER BLOCK | |
| 2. | 9L-5854 | [6] | BAND-FILLER (130.2-MM ID) | |
| 3. | 110-2220 | [6] | SEAL-LINER | |
| 4. | 167-8083 | [14] | BOLT (7/8-14X7.5-IN) | |
| 5. | 9H-1031 | [14] | WASHER-HARD (24X41.5X6-MM THK) | |
| 6. | 167-8081 | [7] | CAP-CRANKSHAFT BEARING | |
| 7. | 142-7072 | [6] | SEAL-LINER | |
| 8. | 142-6217 | [6] | SEAL-O-RING | |
| 6I-4361 ABFN | INSERT-LINER SEAT (0.772-MM THK) | |||
| 9Y-3368 ABFN | INSERT-LINER SEAT (0.822-MM THK) | |||
| 6I-4362 ABFN | INSERT-LINER SEAT (0.872-MM THK) | |||
| 6I-4363 ABFN | INSERT-LINER SEAT (1.555-MM THK) | |||
| 2W-3815 ABFN | INSERT-LINER SEAT (1.605-MM THK) | |||
| 6I-4364 ABFN | INSERT-LINER SEAT (1.655-MM THK) | |||
| 6I-4365 ABFN | INSERT-LINER SEAT (2.66-MM THK) | |||
| 5N-0093 ABFN | INSERT-LINER SEAT (2.71-MM THK) | |||
| 6I-4366 ABFN | INSERT-LINER SEAT (2.76-MM THK) | |||
| 101-0524 ABFN | INSERT-LINER SEAT (5.16-MM THK) | |||
| 101-0523 ABFN | INSERT-LINER SEAT (5.21-MM THK) | |||
| 101-0525 ABFN | INSERT-LINER SEAT (5.26-MM THK) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| N | FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SIS WEB | |||
#SEBP25550068
234-5997: CYLINDER BLOCK GP
234-5997 CYLINDER BLOCK GP
S/N 9WR10000-UP
ACERT, 14.6 LITER
PART OF 234-5998 CYLINDER BLOCK GP
S/N 9WR10000-UP
ACERT, 14.6 LITER
PART OF 234-5998 CYLINDER BLOCK GP
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 197-9322 | [6] | LINER-CYLINDER BLOCK | |
| 2. | 229-8568 | [1] | CYLINDER BLOCK AS | |
| 2A. | 167-8083 | [14] | BOLT (7/8-14X7.5-IN) | |
| 2B. | 9H-1031 | [14] | WASHER-HARD (24X41.5X6-MM THK) | |
| 2C. | 167-8081 | [7] | CAP-CRANKSHAFT BEARING | |
| 3. | 110-2220 | [6] | SEAL-LINER (MIDDLE) | |
| 4. | 142-6217 | [6] | SEAL-O-RING (OIL) | |
| 5. | 142-7072 | [6] | SEAL-LINER (COOLANT) | |
| 6. | 9L-5854 | [6] | BAND-FILLER (130.2-MM ID) | |
| 6I-4361 ABFN | INSERT-LINER SEAT (0.772-MM THK) | |||
| 9Y-3368 ABFN | INSERT-LINER SEAT (0.822-MM THK) | |||
| 6I-4362 ABFN | INSERT-LINER SEAT (0.872-MM THK) | |||
| 6I-4363 ABFN | INSERT-LINER SEAT (1.555-MM THK) | |||
| 2W-3815 ABFN | INSERT-LINER SEAT (1.605-MM THK) | |||
| 6I-4364 ABFN | INSERT-LINER SEAT (1.655-MM THK) | |||
| 6I-4365 ABFN | INSERT-LINER SEAT (2.66-MM THK) | |||
| 5N-0093 ABFN | INSERT-LINER SEAT (2.71-MM THK) | |||
| 6I-4366 ABFN | INSERT-LINER SEAT (2.76-MM THK) | |||
| 101-0524 ABFN | INSERT-LINER SEAT (5.16-MM THK) | |||
| 101-0523 ABFN | INSERT-LINER SEAT (5.21-MM THK) | |||
| 101-0525 ABFN | INSERT-LINER SEAT (5.26-MM THK) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| N | FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SIS WEB | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP25550069
234-5998: CYLINDER BLOCK GP
Parts for your 3406E MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-9540 | [1] | DOWEL | |
| 2. | 4N-1650 | [1] | DOWEL | |
| 3. | 6I-1055 | [1] | DOWEL | |
| 4. | 6I-4421 | [1] | PLATE-SPACER | |
| 5. | 8S-9094 | [1] | PLUG-ORIFICE | |
| 6. | 142-2329 | [1] | SEAL (DRAINBACK) | |
| 7. | 227-1204 | [1] | GASKET | |
| 8. | 234-5997 Y | [1] | CYLINDER BLOCK GP | |
| 9. | 100-7399 | [2] | PLUG | |
| 10. | 250-0466 | [2] | SEAL-O-RING | |
| 11. | 4N-0683 | [2] | DOWEL | |
| 12. | 5P-0840 | [1] | SEAL-O-RING | |
| 13. | 266-6038 | [2] | DOWEL | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Truck Engine News
Engine News
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Specifications
Tool Operating Manual
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Testing and Adjusting
Disassembly and Assembly
