AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

151-0960 GOVERNOR GP-UNIT INJECTOR PART OF 131-0721 GOVERNOR GP-UNIT INJECTOR 3116 INDUSTRIAL ENGINE


FUEL SYSTEM
GOVERNOR GP
KIT-FUEL SYSTEM PARTS
LINES GP-FUEL

INDUSTRIAL ENGINE 3116 INDUSTRIAL ENGINE 2MR
 3116 Industrial Engine 2MR00001-UP SEBP2556 3116 2MR   (1996)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
135-7299 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
145-3240 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
151-0960 GOVERNOR GP-UNIT INJECTOR
6I-3701 GOVERNOR GP-UNIT INJECTOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
 

#SEBP25560490
 

151-0960: GOVERNOR GP-UNIT INJECTOR

151-0960 GOVERNOR GP-UNIT INJECTOR
PART OF 131-0721 GOVERNOR GP-UNIT INJECTOR
i00965441 SEBP2556
1510960 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7322 [1] HOUSING AS  
2. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
3. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
4. 7E-3216 [1] BLOCK AS-BEARING  
4A. 6F-5933 [2] BEARING AS-NEEDLE  
5. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
6. 7C-8854 [1] PIN-CLEVIS  
7. 8T-1460 [1] RING-RETAINING  
8. 7C-4483 [1] SCREEN AS (OIL INLET)  
9. 7C-5541 [2] PLATE  
10. 131-3984 M [1] BOLT  
11. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
12. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 123-6433 [1] ARBOR AS-TORQUE CAM  
15. 108-1612 [1] CLEVIS  
16. 4W-6630 [1] LEVER  
17. 4P-4000 [1] SPRING-LEVER  
18. 128-4794 [1] PLUG  
19. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
20. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
21. 8T-7060 [1] RING-RETAINING  
22. 125-8158 [1] SLEEVE-RACK CONTROL  
23. 5C-2874 M [2] NUT (M5X0.8-THD)  
24. 115-2553 [1] VALVE-GOVERNOR SERVO  
25. 4P-5743 [1] LEVER AS-LIMIT  
26. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
27. 5P-9757 [1] SEAL-O-RING  
28. 6D-9953 [1] PIN-SPRING  
29. 108-1613 [1] PISTON-SERVO  
30. 8C-3312 [1] RING-RETAINING  
31. 7C-5148 [1] CARRIER-FLYWEIGHT  
32. 2S-7316 [2] DOWEL  
33. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
34. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
35. 7W-8993 [2] WEIGHT  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7W-5591 [1] SEAT-GOVERNOR SPRING  
39. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 4P-4231 [1] COVER-REAR  
43. 6V-5100 [1] SEAL-O-RING  
44. 7C-5883 B [7] SHIM (0.25-MM THK)  
45. 7C-3776 [1] PISTON AS  
45A. 4N-6407 [1] SPOOL-DASHPOT  
45B. 4N-6406 [1] RING-SPACER  
45C. 4N-6404 [1] RING-RETAINING  
46. 4P-8948 [1] SEAT AS-SPRING  
47. 7W-1440 B [8] SHIM (0.12-MM THK)  
48. 7C-2743 [2] RACE  
49. 7W-5561 [1] BEARING-THRUST  
50. 115-1192 [1] SEAL-GOVERNOR HOUSING  
51. 8C-5061 [1] RING-RETAINING  
52. 7C-5150 [1] PIN  
53. 7C-5480 [1] SPRING-TORSION  
54. 7C-8640 [1] SPRING-CAM  
55. 7W-5594 [1] SHAFT AS-PIVOT  
55A. 8C-5899 [1] PIN-SPRING  
56. 7E-3217 [1] LEVER AS  
57. 3P-3547 [1] RING-RETAINING  
58. 114-1803 [1] LEVER AS  
59. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
60. 7N-2171 [1] RING-RETAINING  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 4P-3539 [1] LEVER-THROTTLE  
63. 4P-3537 [1] RING-TOLERANCE  
64. 4W-6010 [1] CLAMP  
65. 6V-5683 M [1] BOLT (M6X1X16-MM)  
66. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
67. 5C-8312 M [1] NUT (M4X0.7-THD)  
68. 5M-2057 [1] SEAL-O-RING  
69. 9Y-1837 [1] SPRING  
70. 6V-8189 [1] NUT (5/16-18-THD)  
71. 2S-4078 [1] SEAL-O-RING  
72. 109-4587 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25560491
 

6I-3701: GOVERNOR GP-UNIT INJECTOR

6I-3701 GOVERNOR GP-UNIT INJECTOR
i00525075 SEBP2556
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO BREAKDOWN OF SERVICEABLE PARTS ARE AVAILABLE AT THIS TIME
 

#SEBP25560492
 

390-9331: KIT-INJECTOR

390-9331 KIT-INJECTOR
SINGLE FUEL INJECTOR
FOR USE WITH @@@@@220-5125@@@@@
FIELD INSTALLATION
i05235911 SEBP2556
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  114-8718 [1] SEAL-O-RING  
  125-8274 [1] SEAL-O-RING  
 

#SEBP25560493
 

156-9888: LINES GP-FLEXIBLE FUEL

156-9888 LINES GP-FLEXIBLE FUEL
PROVIDES TWO 1015MM LONG WITH 3/8-18 NPTF THD
FOR USE WITH CUSTOMER SUPPLIED TANK
AN ATTACHMENT
i00944373 SEBP2556
1569888 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8636 [1] CONNECTOR  
2. 3J-1907 [1] SEAL-O-RING  
3. 6V-8397 [5] SEAL-O-RING  
4. 6V-9850 [1] ELBOW  
5. 8W-2522 I [2] HOSE AS  
6. 8C-6869 [2] CONNECTOR  
7. 3K-0360 [1] SEAL-O-RING  
8. 6V-8723 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25560494
 

158-6315: LINES GP-FLEXIBLE FUEL

158-6315 LINES GP-FLEXIBLE FUEL
AN ATTACHMENT
i01358670 SEBP2556
1586315 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8636 [2] CONNECTOR  
2. 3J-1907 [2] SEAL-O-RING  
3. 6V-8397 [6] SEAL-O-RING  
4. 6V-9850 [2] ELBOW  
5. 8T-6725 [2] CONNECTOR  
6. 8W-2522 I [2] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25560495
 

159-1429: LINES GP-FLEXIBLE FUEL

159-1429 LINES GP-FLEXIBLE FUEL
M16 METRIC THREAD CONNECTOR
AN ATTACHMENT
i00944969 SEBP2556
1591429 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8636 [3] CONNECTOR  
2. 3J-1907 [3] SEAL-O-RING  
3. 6V-8397 [5] SEAL-O-RING  
4. 6V-9850 [1] ELBOW  
5. 8W-2522 I [2] HOSE AS  
6. 6V-8723 [1] ELBOW  
7. 3K-0360 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25560496
 

6I-2498: LINES GP-FLEXIBLE FUEL

6I-2498 LINES GP-FLEXIBLE FUEL
FOR USE WITH MARINE ENGINE PIPE THREADS CONNECTOR
AN ATTACHMENT
i00394451 SEBP2556
6I2498 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8636 [2] CONNECTOR  
2. 3J-1907 [2] SEAL-O-RING  
3. 6V-8397 [6] SEAL-O-RING  
4. 6V-9850 [2] ELBOW  
5. 8C-6869 [2] CONNECTOR  
6. 8W-2522 I [2] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25560497
 

7C-6598: LINES GP-FLEXIBLE FUEL

7C-6598 LINES GP-FLEXIBLE FUEL
FOR USE WITH FUEL TANK, APPLICATIONS REQUIRING FLEXIBLE HOSES FOR CONNECTIONS TO FUEL FILTER LINES
AN ATTACHMENT
i00409496 SEBP2556
7C6598 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8636 [3] CONNECTOR  
2. 6V-8397 [6] SEAL-O-RING  
3. 091-9956 I [1] HOSE AS  
4. 6V-9850 [1] ELBOW  
5. 6V-9001 [1] ELBOW  
6. 8W-2522 I [1] HOSE AS  
7. 7X-3163 [1] ADAPTER-SWIVEL  
8. 8C-4985 [1] ADAPTER  
9. 3N-6935 [1] VALVE-CHECK  
10. 8C-6869 [1] CONNECTOR  
11. 3J-1907 [5] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25560498
 

148-6315: LINES GP-FUEL

148-6315 LINES GP-FUEL
AN ATTACHMENT
i01022162 SEBP2556
1486315 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8724 [1] ELBOW  
2. 3J-1907 [1] SEAL-O-RING  
3. 130-4821 I [1] HOSE AS  
4. 6V-8397 [3] SEAL-O-RING  
5. 8C-6868 [1] CONNECTOR  
6. 149-5947 [1] ELBOW  
7. 5P-6944 [1] ADAPTER  
8. 3K-0360 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25560499
 

151-4807: LINES GP-FUEL

151-4807 LINES GP-FUEL
i00690410 SEBP2556
1514807 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-7054 [1] SEAL-O-RING  
2. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
3. 7E-5190 [1] TUBE AS  
4. 7E-5189 [1] VALVE AS (FUEL)  
5. 5P-7813 [1] SEAL-O-RING  
6. 3N-3252 [1] SPRING  
7. 8T-0151 [1] ADAPTER  
8. 3J-1907 [1] SEAL-O-RING  
9. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
10. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Vernier Control Cable Assembly
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116 and 3126 Engines
Governor - Remove
3114, 3116 and 3126 Engines

Caterpillar Parts SIS Catalog 3116 :

GOVERNOR GP-UNIT INJECTOR
145-3240 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
135-7299 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
134-6273 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
134-6272 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
134-6268 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
134-6267 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
134-5250 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
133-3984 GOVERNOR GP-UNIT INJECTOR
6I-3701 GOVERNOR GP-UNIT INJECTOR
390-9331 KIT-INJECTOR
LINES GP-FLEXIBLE FUEL
156-9888 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
158-6315 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
159-1429 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
6I-2498 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
7C-6598 LINES GP-FLEXIBLE FUEL
LINES GP-FUEL
148-6315 LINES GP-FUEL

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.