AVSPARE.COM
parts catalog

147-9592 PISTON & ROD GP S/N 9ZR1775-2341 17:1 RATIO 3126 INDUSTRIAL ENGINE




BASIC ENGINE

PISTON & ROD GP
 

#SEBP25570160
 

147-9592: PISTON & ROD GP

147-9592 PISTON & ROD GP
S/N 9ZR1775-2341
17:1 RATIO
i00583845 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-4983 [1] CROWN AS-PISTON  
2. 132-5246 [1] RING-PISTON (TOP)  
3. 197-9277 [1] RING-PISTON (INTERMEDIATE)  
4. 107-7566 [1] RING-PISTON (OIL CONTROL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 168-7226 [1] PIN-PISTON  
7. 2W-9128 [1] ROD AS-CONNECTING  
7A. 2W-0027 [1] BEARING (EYE END)  
7B. 9N-3832 [2] BOLT-CONNECTING ROD  
7C. 9L-7669 [2] NUT-CONNECTING ROD (7/16-20-THD)  
8. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
9. 135-5970 [1] TUBE AS  
10. 187-1513 [1] SKIRT-PISTON  
11. 7W-9415 [1] BEARING-CONNECTING ROD (STANDARD)  
  7C-6976 A [1] BEARING-CONNECTING ROD (0.25-MM US)  
  7C-6977 A [1] BEARING-CONNECTING ROD (0.5-MM US)  
  A   NOT PART OF THIS GROUP
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25570161
 

147-9592: PISTON & ROD GP

147-9592 PISTON & ROD GP
17:1 RATIO
i01816682 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 393-8986 [1] CROWN AS-PISTON  
2. 197-9386 [1] RING-PISTON (TOP)  
3. 197-9277 [1] RING-PISTON (INTERMEDIATE)  
4. 197-9354 [1] RING-PISTON (OIL CONTROL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 525-0480 [1] PIN-PISTON  
7. 213-3193 [1] ROD AS-CONNECTING (NON-DRILLED)  
7A. 2W-0027 [1] BEARING (EYE END)  
7B. 229-6266 M [2] BOLT (M11X1.25X65-MM)  
8. 224-6638 [1] BEARING-CONNECTING ROD (STANDARD)  
  7C-6976 AB BEARING-CONNECTING ROD (0.25-MM US)  
  7C-6977 AB BEARING-CONNECTING ROD (0.5-MM US)  
9. 238-2726 [1] SKIRT-PISTON  
10. 135-5970 [1] TUBE AS (OIL JET)  
11. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25570162
 

117-4727: PLUG GP-CYLINDER BLOCK

117-4727 PLUG GP-CYLINDER BLOCK
FOR USE WITH @@@@@117-6182@@@@@
CANNOT BE USED WITH @@@@@132-3041@@@@@, @@@@@132-3042@@@@@
AN ATTACHMENT
i00472194 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG (9/16-18-THD)  
2. 3J-1907 [1] SEAL-O-RING  
 

#SEBP25570163
 

120-5330: PLUG GP-CYLINDER BLOCK

120-5330 PLUG GP-CYLINDER BLOCK
FOR USE WITH @@@@@117-6182@@@@@
CANNOT BE USED WITH @@@@@132-1444@@@@@
AN ATTACHMENT
i00473790 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
 

#SEBP25570164
 

132-3366: PLUG GP-CYLINDER BLOCK

132-3366 PLUG GP-CYLINDER BLOCK
FOR USE WITH @@@@@117-6182@@@@@
CANNOT BE USED WITH @@@@@132-2057@@@@@, @@@@@132-2058@@@@@, @@@@@132-2060@@@@@, @@@@@132-1446@@@@@
AN ATTACHMENT
i00495200 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG (9/16-18-THD)  
2. 3J-1907 [1] SEAL-O-RING  
 

#SEBP25570165
 

156-0228: PLUG GP-CYLINDER BLOCK

156-0228 PLUG GP-CYLINDER BLOCK
AN ATTACHMENT
i00931383 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8008 [2] PLUG (1-1/16-12-THD)  
2. 3D-2824 [2] SEAL-O-RING  
3. 9S-8005 [1] PLUG (3/4-16-THD)  
4. 3K-0360 [1] SEAL-O-RING  
5. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-0293 M [1] BOLT (M12X1.75X20-MM)  
  M   METRIC PART
 

#SEBP25570166
 

156-0229: PLUG GP-CYLINDER BLOCK

156-0229 PLUG GP-CYLINDER BLOCK
FOR USE WITH WATERCOOLED MANIFOLD
AN ATTACHMENT
i01162587 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
2. 8T-0293 M [1] BOLT (M12X1.75X20-MM)  
  M   METRIC PART
 

#SEBP25570167
 

159-0303: PLUG GP-CYLINDER BLOCK

159-0303 PLUG GP-CYLINDER BLOCK
REQUIRED WHEN REMOTE MOUNT COOLANT CONDITIONER IS NOT USED
FOR USE WITH @@@@@132-3309@@@@@
AN ATTACHMENT
i00883790 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0293 M [1] BOLT (M12X1.75X20-MM)  
2. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
3. 398-5612 [2] PLUG AS  
    (EACH INCLUDES)
  6V-5063 [1] SEAL-O-RING  
  360-3682 [1] PLUG-O-RING  
  M   METRIC PART
 

#SEBP25570168
 

121-0802: PLUG GP-FLYWHEEL HOUSING

121-0802 PLUG GP-FLYWHEEL HOUSING
CANNOT BE USED WITH @@@@@117-4739@@@@@, @@@@@132-1378@@@@@, @@@@@132-1379@@@@@, @@@@@132-1380@@@@@
AN ATTACHMENT
i00479295 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-1294 [1] PLUG-SEAL  
 

#SEBP25570169
 

3N-9098: POWER TAKE-OFF GP

3N-9098 POWER TAKE-OFF GP
CLUTCH
FOR USE WITH @@@@@ 7E-2397@@@@@, @@@@@132-2104@@@@@, SAE NO. 1 FLYWHEEL
AN ATTACHMENT
i00366960 SEBP2557
  For full view, you need register

Parts for your 3126 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9382 [12] BOLT (7/16-14X1.25-IN)  
2. 6V-0455 [1] BALL BEARING  
3. 0S-1595 [8] BOLT (1/2-13X1.25-IN)  
4. 6B-8575 [1] KEY-SQUARE  
5. 3N-9097 Y [1] CLUTCH GP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Special Instruction
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Piston Cooling Jet
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Connecting Rod
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston and Rings
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Connecting Rod Bearing Journal
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TOP PISTON RING ON CERTAIN 3126 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Compression - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Excessive Bearing Wear - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Connecting Rod Bearings - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston Ring Groove - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Mechanical Noise (Knock) in Engine
3114, 3116 and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116 and 3126 Engines
Piston Cooling Jets - Remove and Install
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Remove
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Install
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Assemble
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Install
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Remove
3114, 3116 and 3126 Engines

Caterpillar Parts SIS Catalog 3126 :

Truck sale:

On Request 
Caterpillar 3126B, Construction
- Industrial engines
ZEPPELIN POWER SYSTEMS GMBH & CO. KG
Germany
 
CATERPILLAR 3126 1995
- MARINE - PROPULSION
BARLOWORLD STET
USD $14,000 
1999 CAT 3126

Milton CAT Power Systems
Milford, Massachusetts
USD $11,000 
1999 CAT 3126

Milton CAT Power Systems
Milford, Massachusetts
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.