AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406B INDUSTRIAL ENGINE 6TB09166-09856 BASIC ENGINE Caterpillar SIS



INDUSTRIAL ENGINE 3406B INDUSTRIAL ENGINE 6TB
 3406B INDUSTRIAL ENGINE 6TB09166-09856 SEBP2558 3406B 6TB   (1983)

Parts group 3406B:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
1N-2991 AIR COMPRESSOR GP
1N2991 AIR COMPRESSOR GP
1N2992-PAGE 34
AN ATTACHMENT
AIR COMPRESSOR GP
1N-2992 AIR COMPRESSOR GP
1N2992 AIR COMPRESSOR GP*R
9N5449-PAGE 66
PART OF 1N2991 AIR COMPRESSOR
AN ATTACHMENT
AIR COMPRESSOR GP
1N-2995 AIR COMPRESSOR GP
1N2995 AIR COMPRESSOR GP*R
PART OF 1N2997 AIR COMPRESSOR
AN ATTACHMENT
AIR COMPRESSOR GP
7E-1428 AIR COMPRESSOR GP
7E1428 AIR COMPRESSOR GP
9Y2240-PAGE 40
AN ATTACHMENT
AIR COMPRESSOR GP
1N-2997 AIR COMPRESSOR GP
1N2997 AIR COMPRESSOR GP
1N2995-PAGE 35
AN ATTACHMENT
AIR COMPRESSOR GP
7W-0023 AIR COMPRESSOR GP
7W0023 AIR COMPRESSOR GP
7W4020-PAGE 38
AN ATTACHMENT
AIR COMPRESSOR GP
7W-4020 AIR COMPRESSOR GP
7W4020 AIR COMPRESSOR GP*R
PART OF 7W0023 AIR COMPRESSOR
AN ATTACHMENT
AIR COMPRESSOR GP
9Y-2240 AIR COMPRESSOR GP
9Y2240 AIR COMPRESSOR GP*R
PART OF 7E1428 AIR COMPRESSOR
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
1N-4470 LINES GP-AIR COMPRESSOR
1N4470 LINES GP-AIR COMPRESSOR
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
2W-9998 LINES GP-AIR COMPRESSOR
2W9998 LINES GP-AIR COMPRESSOR
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
6I-1820 LINES GP-AIR COMPRESSOR
6I1820 LINES GP-AIR COMPRESSOR
TYPE 1
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
6I-1820 LINES GP-AIR COMPRESSOR
6I1820 LINES GP-AIR COMPRESSOR
TYPE 2
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
7C-0316 LINES GP-AIR COMPRESSOR
7C0316 LINES GP-AIR COMPRESSOR
FOR USE WITH 30 CFM AIR COMPRESSOR
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
7C-1783 LINES GP-AIR COMPRESSOR
7C1783 LINES GP-AIR COMPRESSOR
FOR USE WITH AIR TO AIR AFTERCOOLED ENGINE AR
& 7W0023 AIR COMPRESSOR
AN ATTACHMENT
BARRING GP
BARRING GP
5R-7425 BARRING GP
5R7425 BARRING GP
AN ATTACHMENT
BELT TIGHTENER GP
BELT TIGHTENER GP
3N-9582 BELT TIGHTENER GP
3N9582 BELT TIGHTENER GP
FOR USE WITH FIXED CENTER FAN
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
8N-9244 CAMSHAFT GP
8N9244 CAMSHAFT GP
CAMSHAFT GP
7W-3798 CAMSHAFT GP
7W3798 CAMSHAFT GP-SINGLE
CLUTCH GP
CLUTCH AS
3N-4128 CLUTCH AS
3N4128 CLUTCH AS
FIELD REPLACEMENT FOR 5N3334-PAGE 53
CLUTCH GP
2W-4908 CLUTCH GP
2W4908 CLUTCH GP-PART 1 OF 2
TYPE 1
PART OF 2W4909 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
2W-4908 CLUTCH GP
2W4908 CLUTCH GP-PART 2 OF 2
TYPE 1
PART OF 2W4909 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
2W-4908 CLUTCH GP
2W4908 CLUTCH GP-PART 1 OF 2
TYPE 2
PART OF 2W4909 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
2W-4908 CLUTCH GP
2W4908 CLUTCH GP-PART 2 OF 2
TYPE 2
PART OF 2W4909 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
2W-4908 CLUTCH GP
2W4908 CLUTCH GP-PART 1 OF 2
TYPE 3
PART OF 2W4909 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
2W-4908 CLUTCH GP
2W4908 CLUTCH GP-PART 2 OF 2
TYPE 3
PART OF 2W4909 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
4P-3073 CLUTCH GP
4P3073 CLUTCH GP
PART OF 4P3074 POWER TAKE-OFF-REAR
AN ATTACHMENT
CLUTCH GP
5N-3334 CLUTCH GP
5N3334 CLUTCH GP
PART OF 5N3335 POWER TAKE-OFF-REAR
FOR FIELD REPLACEMENT ORDER 3N4128 CLUTCH-PAGE 45
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
4N0741 CRANKSHAFT GP
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
1W-5107 COVER GP-CYLINDER BLOCK
1W5107 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
1W-5106 COVER GP-CYLINDER BLOCK
1W5106 COVER GP-CYLINDER BLOCK
FOR USE WITH NON-AFTERCOOLED ENGINES
COVER GP-CYLINDER BLOCK
9N-0015 COVER GP-CYLINDER BLOCK
9N0015 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
9N-0684 COVER GP-CYLINDER BLOCK
9N0684 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
9N-3866 COVER GP-CYLINDER BLOCK
9N3866 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
9N-5449 CYLINDER BLOCK AS
9N5449 CYLINDER BLOCK AS
AIR COMPRESSOR
PART OF 1N2992 AIR COMPRESSOR
AN ATTACHMENT
CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
4P3720 CYLINDER BLOCK GP
S/N 6TB9166-UP
FIELD REPLACEMENT FOR 8N9267-PAGE 68
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
8N9267 CYLINDER BLOCK GP*R
S/N 6TB9166-UP
FIELD REPLACEMENT ORDER 4P3720-PAGE 67
CYLINDER HEAD GP
CYLINDER HEAD AS
7W-0007 CYLINDER HEAD AS
7W0007 CYLINDER HEAD AS
PART OF 7W2009, 7W2203 CYLINDER HEADS
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
7W0009 CYLINDER HEAD AS*R
TYPE 1
7W0007-PAGE 69
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
7W0009 CYLINDER HEAD AS*R
TYPE 2
9Y3775-PAGE 72
CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS
9Y3775 CYLINDER HEAD AS
S/N 6TB9166-UP
PART OF 7W2202, 7W2203, 7W0009 CYLINDER HEADS
CYLINDER HEAD AS
110-5096 CYLINDER HEAD AS
1105096 CYLINDER HEAD AS
1105099-PAGE 74
CYLINDER HEAD AS
110-5099 CYLINDER HEAD AS
1105099 CYLINDER HEAD AS
PART OF 7W2203, 1105096 CYLINDER HEAD
CYLINDER HEAD GP
1W-1439 CYLINDER HEAD GP
1W1439 CYLINDER HEAD GP*R
S/N 6TB9166-UP
7W2202-PAGE 77
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
4W2436 CYLINDER HEAD GP*R
S/N 6TB9166-UP
7W2203-PAGE 79
CYLINDER HEAD GP
7W-2202 CYLINDER HEAD GP
7W2202 CYLINDER HEAD GP
TYPE 1. 6TB9166-UP
7W0007-PAGE 69
PART OF 1W1439 CYLINDER HEAD
CYLINDER HEAD GP
7W-2202 CYLINDER HEAD GP
7W2202 CYLINDER HEAD GP
TYPE 2. S/N 6TB9166-UP
9Y3775-PAGE 72
PART OF 1W1439 CYLINDER HEAD
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W2203 CYLINDER HEAD GP
TYPE 1
7W0007-PAGE 69
PART OF 4W2436 CYLINDER HEAD
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W2203 CYLINDER HEAD GP
TYPE 2
9Y3775-PAGE 72
PART OF 4W2436 CYLINDER HEAD
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W2203 CYLINDER HEAD GP
TYPE 3
1105099-PAGE 74
PART OF 4W2436 CYLINDER HEAD
DAMPER GP
DAMPER & PULLEY GP
6I-2967 DAMPER & PULLEY GP
6I2967 DAMPER & PULLEY GP
S/N 6TB9419-UP
DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
4P5894 DAMPER & PULLEY GP
7W-0113 DAMPER GP
7W0113 DAMPER GP
PROVIDES WASHERS WHEN CAST IRON PULLEY IS NOT INSTALLED
AN ATTACHMENT
GUARD GP-DAMPER
2W-7257 GUARD GP-DAMPER
2W7257 GUARD GP-DAMPER
FOR USE WHEN NO ACCESSORY IS DRIVEN FROM FRONT OF CRANKSHAFT
AN ATTACHMENT
GUARD GP-DAMPER
2W-7594 GUARD GP-DAMPER
2W7594 GUARD GP-DAMPER
FOR USE WITH CHARGING ALTERNATOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
1N-3970 DRIVE GP-ACCESSORY
1N3970 DRIVE GP-ACCESSORY
L.H.
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
8N9653 DRIVE GP-ACCESSORY
AIR COMPRESSOR
DRIVE GP-ACCESSORY
4W-3123 DRIVE GP-ACCESSORY
4W3123 DRIVE GP-ACCESSORY
AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
1W-6411 DRIVE GP-AUXILIARY
1W6411 DRIVE GP-AUXILIARY
RH. FRONT
AN ATTACHMENT
DRIVE GP-AUXILIARY
1W-0296 DRIVE GP-AUXILIARY
1W0296 DRIVE GP-AUXILIARY
LH. FRONT-REARWARD
AN ATTACHMENT
DRIVE GP-AUXILIARY
1W-8582 DRIVE GP-AUXILIARY
1W8582 DRIVE GP-AUXILIARY
LH. FRONT FORWARD
CANNOT BE USED WITH 1W8585 AUXILIARY DRIVE GP OR 1N2991 & 1N2997 AIR
COMPRESSOR GPS. AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
1W-1176 DRIVE GP-FAN
1W1176 DRIVE GP-FAN-.941 DRIVE RATIO
ALSO AN ATTACHMENT
DRIVE GP-FAN
4W-6018 DRIVE GP-FAN
4W6018 DRIVE GP-FAN-.800 DRIVE RATIO
AN ATTACHMENT
DRIVE GP-FAN
7N-8830 DRIVE GP-FAN
7N8830 DRIVE GP-FAN
AN ATTACHMENT
DRIVE GP-FAN
7N-8833 DRIVE GP-FAN
7N8833 DRIVE GP-FAN
TYPE 1
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8833 DRIVE GP-FAN
7N8833 DRIVE GP-FAN
TYPE 2
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8836 DRIVE GP-FAN
7N8836 DRIVE GP-FAN
TYPE 1
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8836 DRIVE GP-FAN
7N8836 DRIVE GP-FAN
TYPE 2
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8837 DRIVE GP-FAN
7N8837 DRIVE GP-FAN
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8838 DRIVE GP-FAN
7N8838 DRIVE GP-FAN
TYPE 1
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8838 DRIVE GP-FAN
7N8838 DRIVE GP-FAN
TYPE 2
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8840 DRIVE GP-FAN
7N8840 DRIVE GP-FAN
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8968 DRIVE GP-FAN
7N8968 DRIVE GP-FAN
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8970 DRIVE GP-FAN
7N8970 DRIVE GP-FAN
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8974 DRIVE GP-FAN
7N8974 DRIVE GP-FAN
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8975 DRIVE GP-FAN
7N8975 DRIVE GP-FAN
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8976 DRIVE GP-FAN
7N8976 DRIVE GP-FAN
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
7N-8978 DRIVE GP-FAN
7N8978 DRIVE GP-FAN
REFER TO 4N6973 RADIATOR CHART-PAGE 176
AN ATTACHMENT
DRIVE GP-FAN
8N-6587 DRIVE GP-FAN
8N6587 DRIVE GP-FAN-.681 DRIVE RATIO
5N0414 V-BELT SET IS AVAILABLE
AN ATTACHMENT
DRIVE GP-FAN
8N-6588 DRIVE GP-FAN
8N6588 DRIVE GP-FAN-.571 DRIVE RATIO
7E9515 V-BELT SET IS AVAILABLE
ALSO AN ATTACHMENT
DRIVE GP-FAN
8N-6589 DRIVE GP-FAN
8N6589 DRIVE GP-FAN-.800 DRIVE RATIO
5N4751 V-BELT SET IS AVAILABLE
AN ATTACHMENT
DRIVE GP-PUMP
DRIVE GP-PUMP
1W-8583 DRIVE GP-PUMP
1W8583 DRIVE GP-PUMP
AN ATTACHMENT
DRIVE GP-PUMP
1W-7935 DRIVE GP-PUMP
1W7935 DRIVE GP-PUMP
AN ATTACHMENT
FLYWHEEL GP
ADAPTER GP-FLYWHEEL
6N-9829 ADAPTER GP-FLYWHEEL
6N9829 ADAPTER GP-FLYWHEEL
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
FLYWHEEL GP
4P-3100 FLYWHEEL GP
4P3100 FLYWHEEL GP
AN ATTACHMENT
FLYWHEEL GP
1W-8340 FLYWHEEL GP
1W8340 FLYWHEEL GP
FLYWHEEL GP
6N-1281 FLYWHEEL GP
6N1281 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING AND TWIN DISC TORQUE
CONVERTER WITH CLUTCH
AN ATTACHMENT
FLYWHEEL GP
4W-7370 FLYWHEEL GP
4W7370 FLYWHEEL GP
FOR USE WITH A SPICER 10 SPRING DAMPENED DISK CLUTCH AND WITH
CLARK C & CL8000 SERIES TORQUE CONVERTERS
ALSO AN ATTACHMENT
FLYWHEEL GP
7N-3060 FLYWHEEL GP
7N3060 FLYWHEEL GP
FLYWHEEL GP
6N-1299 FLYWHEEL GP
6N1299 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING & CLARK NO. 14, 15 OR 16
TWIN DISC TORQUE CONVERTER WITHOUT CLUTCH
AN ATTACHMENT
FLYWHEEL GP
9N-0676 FLYWHEEL GP
9N0676 FLYWHEEL GP
FOR USE WITH SPICER OR LIPE ROLLWAY 15.5" TWO PLATE CLUTCH AND
SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
FLYWHEEL GP
7N-3079 FLYWHEEL GP
7N3079 FLYWHEEL GP
GEAR GP-REAR
5N-9240 GEAR GP-REAR
5N9240 GEAR GP-REAR
GEAR GP
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N9246 GEAR GP-FRONT
GEAR GP-REAR
5N-9240 GEAR GP-REAR
5N9240 GEAR GP-REAR
HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
1W1468 HOUSING GP-FRONT
GUARD GP-BELT
GUARD GP-BELT
1N-3880 GUARD GP-BELT
1N3880 GUARD GP-BELT
PROVIDES A PULLEY AND BELT SAFETY GUARD GP FOR STANDARD SIZE
ALTERNATOR. FOR USE WITH ENGINES EQUIPPED WITH RADIATOR AND FAN
AN ATTACHMENT
GUARD GP-BELT
1N-3876 GUARD GP-BELT
1N3876 GUARD GP-BELT
PROVIDES A PULLEY AND BELT SAFETY GUARD GROUP FOR HEAVY DUTY
ALTERNATOR. FOR USE WITH ENGINES EQUIPPED WITH RADIATOR AND FAN
AN ATTACHMENT
GUARD GP-BELT
2W-9664 GUARD GP-BELT
2W9664 GUARD GP-BELT-TYPE 1
FOR USE WITH 7N9944, 7N9945, 7N9946, 7N9947 RADIATOR GPS,
L.H. ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
2W-9664 GUARD GP-BELT
2W9664 GUARD GP-BELT-TYPE 2
FOR USE WITH 7N9944, 7N9945, 7N9946, 7N9947 RADIATOR GPS,
L.H. ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
2W-9666 GUARD GP-BELT
2W9666 GUARD GP-BELT-RADIATOR FAN-TYPE 1
NOT FOR USE WITH ALTERNATOR, AIR COMPRESSOR,MOBILE EQUIPMENT
FAN DRIVE GPS, OR CUSTOMER SUPPLIED RADIATOR. FOR USE WITH 7N9944,
7N9945, 7N9946, 7N9947 RADIATOR GPS. AN ATTACHMENT
GUARD GP-BELT
2W-9666 GUARD GP-BELT
2W9666 GUARD GP-BELT-RADIATOR FAN-TYPE 2
NOT FOR USE WITH ALTERNATOR, AIR COMPRESSOR,MOBILE EQUIPMENT
FAN DRIVE GPS, OR CUSTOMER SUPPLIED RADIATOR. FOR USE WITH 7N9944,
7N9945, 7N9946, 7N9947 RADIATOR GPS. AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
1W-8341 COVER GP-FLYWHEEL HOUSING
1W8341 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
9N3889 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
4N-4792 COVER GP-FLYWHEEL HOUSING
4N4792 COVER GP-FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
4N-0732 HOUSING GP-FLYWHEEL
4N0732 HOUSING GP-FLYWHEEL
S/N 6TB9166-UP
HOUSING GP-FLYWHEEL
6N-2212 HOUSING GP-FLYWHEEL
6N2212 HOUSING GP-FLYWHEEL
S/N 6TB9166-UP
HOUSING GP-FLYWHEEL
7W-7901 HOUSING GP-FLYWHEEL
7W7901 HOUSING GP-FLYWHEEL
AN ATTACHMENT
HOUSING GP-FLYWHEEL
8N-5965 HOUSING GP-FLYWHEEL
8N5965 HOUSING GP-FLYWHEEL
FIELD INSTALLATION
HOUSING GP-FLYWHEEL
8N-5941 HOUSING GP-FLYWHEEL
8N5941 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
9N3887 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
1W1395 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
4W-6116 COVER GP-FRONT HOUSING
4W6116 COVER GP-FRONT HOUSING
5N-3785 FASTENER GP-FRONT HOUSING
5N3785 FASTENER GP-FRONT HOUSING
WITHOUT FRONT SUPPORT
AN ATTACHMENT
FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
4N6006 FASTENER GP-FRONT HOUSING
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N9246 GEAR GP-FRONT
HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
1W1468 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
4N1331 LIFTING GP
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
8N-9560 MOUNTING GP-ENGINE
8N9560 MOUNTING GP-ENGINE
FLEXIBLE
AN ATTACHMENT
SUPPORT GP-ENGINE
4N-4286 SUPPORT GP-ENGINE
4N4286 SUPPORT GP-ENGINE
REAR
AN ATTACHMENT
SUPPORT GP-ENGINE
8N-2020 SUPPORT GP-ENGINE
8N2020 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
6N-0719 SUPPORT GP-ENGINE
6N0719 SUPPORT GP-ENGINE
FOR USE WITH RH ALTERNATOR
ALSO AN ATTACHMENT
PAN GP-OIL
ADAPTER GP-OIL PAN DRAIN
9Y-5438 ADAPTER GP-OIL PAN DRAIN
9Y5438 ADAPTER GP-OIL PAN DRAIN
6L6155 ADAPTER IS AVAILABLE
AN ATTACHMENT
PAN GP-OIL
4N-0756 PAN GP-OIL
4N0756 PAN GP-OIL
PARTS GP-MISCELLANEOUS
6I-3833 KIT-AIR CLEANER
6I3833 KIT-ADAPTER
THIS ADAPTER KIT IS USED TO REPLACE AXIAL SEAL
AIR CLEANER ELEMENTS WITH RADIAL SEAL AIR CLEANER ELEMENTS
FIELD INSTALLATION
KIT-RELAY
6I-1864 KIT-RELAY
6I1864 KIT-RELAY
FIELD INSTALLATION
PISTON & ROD GP
PISTON & ROD GP
7N-3516 PISTON & ROD GP
7N3516 PISTON & ROD GP-14.5:1 RATIO
POWER TAKE-OFF GP
POWER TAKE-OFF GP-REAR
4P-3074 POWER TAKE-OFF GP-REAR
4P3074 POWER TAKE-OFF GP-REAR
CLUTCH
4P3073-PAGE 52
AN ATTACHMENT
POWER TAKE-OFF GP-REAR
2W-4909 POWER TAKE-OFF GP-REAR
2W4909 POWER TAKE-OFF GP-REAR
CLUTCH
2W4908-PAGE 46
AN ATTACHMENT
POWER TAKE-OFF GP-REAR
5N-3335 POWER TAKE-OFF GP-REAR
5N3335 POWER TAKE-OFF GP-REAR
CLUTCH
5N3334-PAGE 53
CANNOT BE USED WITH REAR STUB SHAFT. AN ATTACHMENT
SUPPORT GP-POWER TAKE-OFF
5N-1933 SUPPORT GP-POWER TAKE-OFF
5N1933 SUPPORT GP-POWER TAKE-OFF-CLUTCH
FOR USE WITH 2W4903 & 5N3335 REAR POWER TAKE-OFFS-CLUTCH
CANNOT BE USED WITH FUEL TANK BASE
AN ATTACHMENT
SUPPORT GP-POWER TAKE-OFF
5N-1678 SUPPORT GP-POWER TAKE-OFF
5N1678 SUPPORT GP-POWER TAKE-OFF
CLUTCH
FOR USE WITH 2W4909 CLUTCH GP. CANNOT BE USED WITH FUEL TANK BASES
AN ATTACHMENT
PULLEY GP
DAMPER & PULLEY GP
6I-2967 DAMPER & PULLEY GP
6I2967 DAMPER & PULLEY GP
S/N 6TB9419-UP
DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
4P5894 DAMPER & PULLEY GP
PULLEY GP-AUXILIARY DRIVE
6N-7381 PULLEY GP-AUXILIARY DRIVE
6N7381 PULLEY GP-AUXILIARY DRIVE
FOR USE WITH 8N6114 CRANKSHAFT PULLEY GP
ALSO AN ATTACHMENT
PULLEY GP-FAN DRIVE
3N-9597 PULLEY GP-FAN DRIVE
3N9597 PULLEY GP-FAN DRIVE
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
8N-6114 PULLEY GP-CRANKSHAFT
8N6114 PULLEY GP-CRANKSHAFT
AN ATTACHMENT
SHAFT GP-STUB
SHAFT GP-STUB
5N-2010 SHAFT GP-STUB
5N2010 SHAFT GP-STUB
CANNOT BE USED WITH REAR ENCLOSED CLUTCH
AN ATTACHMENT
GUARD GP-STUB SHAFT
5N-3312 GUARD GP-STUB SHAFT
5N3312 GUARD GP-STUB SHAFT
CANNOT BE USED WITH REAR ENCLOSED CLUTCH
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
1N-3880 GUARD GP-BELT
1N3880 GUARD GP-BELT
PROVIDES A PULLEY AND BELT SAFETY GUARD GP FOR STANDARD SIZE
ALTERNATOR. FOR USE WITH ENGINES EQUIPPED WITH RADIATOR AND FAN
AN ATTACHMENT
GUARD GP-BELT
1N-3876 GUARD GP-BELT
1N3876 GUARD GP-BELT
PROVIDES A PULLEY AND BELT SAFETY GUARD GROUP FOR HEAVY DUTY
ALTERNATOR. FOR USE WITH ENGINES EQUIPPED WITH RADIATOR AND FAN
AN ATTACHMENT
GUARD GP-BELT
2W-9664 GUARD GP-BELT
2W9664 GUARD GP-BELT-TYPE 1
FOR USE WITH 7N9944, 7N9945, 7N9946, 7N9947 RADIATOR GPS,
L.H. ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
2W-9664 GUARD GP-BELT
2W9664 GUARD GP-BELT-TYPE 2
FOR USE WITH 7N9944, 7N9945, 7N9946, 7N9947 RADIATOR GPS,
L.H. ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
2W-9666 GUARD GP-BELT
2W9666 GUARD GP-BELT-RADIATOR FAN-TYPE 1
NOT FOR USE WITH ALTERNATOR, AIR COMPRESSOR,MOBILE EQUIPMENT
FAN DRIVE GPS, OR CUSTOMER SUPPLIED RADIATOR. FOR USE WITH 7N9944,
7N9945, 7N9946, 7N9947 RADIATOR GPS. AN ATTACHMENT
GUARD GP-BELT
2W-9666 GUARD GP-BELT
2W9666 GUARD GP-BELT-RADIATOR FAN-TYPE 2
NOT FOR USE WITH ALTERNATOR, AIR COMPRESSOR,MOBILE EQUIPMENT
FAN DRIVE GPS, OR CUSTOMER SUPPLIED RADIATOR. FOR USE WITH 7N9944,
7N9945, 7N9946, 7N9947 RADIATOR GPS. AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
4N2272 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM
4N4953 COVER GP-VALVE MECHANISM
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
7C-0730 COVER GP-VALVE MECHANISM
7C0730 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7W-7353 COVER GP-VALVE MECHANISM
7W7353 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9N-3618 COVER GP-VALVE MECHANISM
9N3618 COVER GP-VALVE MECHANISM
ROCKER ARM GP
4P-5258 ROCKER ARM GP
4P5258 ROCKER ARM GP
PART OF 4P5712 VALVE MECHANISM
ROCKER ARM GP
4N-1045 ROCKER ARM GP
4N1045 ROCKER ARM GP
PART OF 4W2461, 4N2271 VALVE MECHANISMS
VALVE MECHANISM GP
4P-5712 VALVE MECHANISM GP
4P5712 VALVE MECHANISM GP
4P5258-PAGE 147
VALVE MECHANISM GP
4N-2271 VALVE MECHANISM GP
4N2271 VALVE MECHANISM GP
4N1045-PAGE 147
VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP
4W2461 VALVE MECHANISM GP
4N1045-PAGE 147

Information:

(For parts list, see above)

Service Magazine
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
New Gasket Provides Improved Sealing Between Air Compressor And Drive {1803}
1994/09/01
Repair Guidelines for Air Compressors {1803}
2003/09/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
V-Belt Tension Chart
3406B INDUSTRIAL & MARINE ENGINES
Belt Tightener<BR> (3N9582)
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
V-Belt Tension Chart
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Pulley Tightener Group
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Belt Tension Chart
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02
Engine News
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/16
New 8T2998 Lubricant Available
1986/03/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Additional Information For Checking Valve Camshaft Timing
1989/12/01
Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure
1993/09/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
Inspect For Correct Camshaft Idler Gear Shaft And Bolts{1206}
1995/01/01
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/09/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Special Instruction
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Specifications
Camshaft
3406B INDUSTRIAL & MARINE ENGINES
Camshaft
3406C INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3406C INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Camshaft Bearings
3406B INDUSTRIAL & MARINE ENGINES
Camshaft
3406B INDUSTRIAL & MARINE ENGINES
Valve Lifters
3406C INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3406C INDUSTRIAL & MARINE ENGINES
Camshaft
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Special Instruction
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Specifications
Power Take-Off Clutch<BR> (3N7841)
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Power Take-Off Clutch
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Crankshaft Seal Usage On 3400 Series Engines
1986/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Wear Sleeve Removal Tooling May &quot;Mark&quot; The Crankshaft{1202,1161}
1995/08/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/09/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts
1977/11/09
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing is Now Used {1203}
2007/09/17
Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
2009/10/28
Use Reuse and Salvage Guidelines for Measurements of Crankshafts which Includes the Crankshaft of the Remanufactured Engine with the Serial Number Prefix 1WW {1202}
2006/10/09
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Bearings For Connecting Rods And Mains
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft
3406B INDUSTRIAL & MARINE ENGINES
Connecting Rod And Main Bearing Journals
3406C INDUSTRIAL & MARINE ENGINES
Crankshaft
3406C INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Disassembly and Assembly
Crankshaft Vibration Damper And Pulley
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper &amp; Pulley
3406C INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3406C INDUSTRIAL & MARINE ENGINES
Crankshaft
3406C INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal &amp; Wear Sleeve
3406C INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal &amp; Wear Sleeve
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/12
A New Type of Main Bearing is Available {1202, 1203}
2004/05/03
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Liner Seat Insert Available
1983/08/17
New Connecting Rod And Main Bearings Used
1983/11/30
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/16
Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/12/01
New Cylinder Liner Available
1986/02/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Mid-Life Bearing Maintenance Recommendations
1987/09/01
New Piston Cooling Jets Used
1987/09/01
New Liner Seat Insert Available
1988/12/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Service Tips For Piston Cooling Jets (Tubes)
1990/12/01
Procedure To Retain Oil Pump When The Cylinder Block Pump Mounting Pad Is Broken
1991/05/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/09/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
2006/03/20
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Long Blocks for Certain Engines {1000, 1201}
2015/05/29
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Liner Flange Breakage
Liner Flange Breakage
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
Specifications
Cylinder Block
3406B INDUSTRIAL & MARINE ENGINES
Cylinder Liners
3406B INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection
3406B INDUSTRIAL & MARINE ENGINES
Bearings For Connecting Rods And Mains
3406B INDUSTRIAL & MARINE ENGINES
Idler Gear Shaft Pilot Bore
3406B INDUSTRIAL & MARINE ENGINES
Idler Gear Shaft Pilot Bore
3406C INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Block
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Liners
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection
3406C INDUSTRIAL & MARINE ENGINES
Connecting Rod And Main Bearing Journals
3406C INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Spacer Plate
3406B INDUSTRIAL & MARINE ENGINES
Piston Cooling Tubes
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3406B INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3406B INDUSTRIAL & MARINE ENGINES
Cylinder Liners
3406B INDUSTRIAL & MARINE ENGINES
Spacer Plate
3406C INDUSTRIAL & MARINE ENGINES
Piston Cooling Tubes
3406C INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3406C INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Liners
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11
New Cylinder Liner Available{1201}
1986/02/10
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
New Piston Cooling Jets Used {1213,1214}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/01/30
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Procedure To Retain Oil Pump When Pump Mounting Pad On Cylinder Block Is Broken{1201,1304}
1991/05/20
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/08/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
High Alloy Cylinder Head Improved
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed
1988/11/01
New Head Gasket Available; Head Gasket Replacement Guidelines
1989/02/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/03/01
New Valve Lifter Improves Oil Flow To Top Of Engine
1990/04/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Heads Have Additional Coolant Passages
1992/06/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
New Stronger Cylinder Head Bolts Used{1100}
1996/05/09
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Reman Cylinder Head Kits Are Now Available {1100}
2001/02/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Reman Cylinder Heads Are Now Used on Certain 3406 Mechanical Engines {1100, 1101}
2012/04/05
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR SETTING THE VALVE LASH ON CERTAIN 3406C INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR SETTING THE VALVE LASH ON CERTAIN 3406C INDUSTRIAL ENGINES
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
Specifications
Valves
3406B INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406C INDUSTRIAL & MARINE ENGINES
Valves
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406C INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Disassembly and Assembly
Cylinder Head Assembly
3406B INDUSTRIAL & MARINE ENGINES
Valves
3406B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406B INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly
3406C INDUSTRIAL & MARINE ENGINES
Valves
3406C INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406C INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3406C INDUSTRIAL & MARINE ENGINES
Valve Guides
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
High Alloy Cylinder Head Improved{1101}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/01/30
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/05
New Water Seals Used In Cylinder Head Assemblies{1124}
1994/09/05
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Engine News
Damper Requirements For Remanufactured Short Block
1993/08/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material {1205}
1994/10/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/09/01
Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed{1153}
1996/05/09
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts
1977/11/09
Specifications
Pulley Tightener Group
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Disassembly and Assembly
Crankshaft Vibration Damper And Pulley
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper &amp; Pulley
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
Fan Drive Pulley Group Components{1359}
1993/03/08
Fan Drive Pulley Group Components{1359}
1993/04/12
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Specifications
Accessory Drive Group
3406B INDUSTRIAL & MARINE ENGINES
Auxiliary Drive Groups
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Accessory Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Accessory Drive Group
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Auxiliary Drive Group
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Disassembly and Assembly
Accessory Drive
3406B INDUSTRIAL & MARINE ENGINES
Accessory Drive
3406C INDUSTRIAL & MARINE ENGINES
Specifications
Accessory Drive Group
3406B INDUSTRIAL & MARINE ENGINES
Auxiliary Drive Groups
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Accessory Drive Group
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Auxiliary Drive Group
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Disassembly and Assembly
Accessory Drive
3406B INDUSTRIAL & MARINE ENGINES
Accessory Drive
3406C INDUSTRIAL & MARINE ENGINES
Engine News
Fan Drive Pulley Group Components
1993/04/01
Specifications
V-Belt Tension Chart
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Fan Drive Pulley Group Components{1359}
1993/03/08
Fan Drive Pulley Group Components{1359}
1993/04/12
Engine News
Improved Water Pump Groups Available{1361}
1996/11/01
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}
Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Specifications
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Hydraulic Pump Drive Mounting
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Hydraulic Pump Drive Mounting
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Magazine
New Water Pump Has Improved Seal{1361}
1983/02/14
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
Inspection And Installation Procedures For Water Pump Shaft And Seals{1361,1389,1373}
1985/06/17
New Oil Seal And Coolant Seal Group Improve Service Life Of Engine Water Pump{1361,1389,1373}
1985/06/17
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Improvements Made To Water Pumps; New Groups/Parts Available For Certain Applications{1364,1361}
1990/02/19
New Water Pump Groups Use Tapered Roller Bearing {1361}
1993/07/05
New Cast Iron Inlet Adapter And Impeller For Water Pumps {1361}
1993/07/05
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Water Pump Has Improved Seal{1361}
1983/02/14
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Improvements Made To Water Pumps; New Groups/Parts Available For Certain Applications{1364,1361}
1990/02/19
New Water Pump Groups Use Tapered Roller Bearing {1361}
1993/07/05
New Cast Iron Inlet Adapter And Impeller For Water Pumps {1361}
1993/07/05
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Technical Information Bulletin
Radiator Noise
Radiator Noise
Specifications
Radiator
3406B INDUSTRIAL & MARINE ENGINES
Radiator<BR> (Folded Core)
3406B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Expansion Tank
3406B INDUSTRIAL & MARINE ENGINES
Marine Gear Oil Cooler Core
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/01/25
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Fan Drive Pulley Group Components{1359}
1993/03/08
Fan Drive Pulley Group Components{1359}
1993/04/12
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
No Gaskets Used With Aluminum Flywheel Housings
1991/10/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Inspect For Correct Camshaft Idler Gear Shaft And Bolts{1206}
1995/01/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/24
Special Instruction
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Adapter Group (6N9829)
3406B INDUSTRIAL & MARINE ENGINES
Idler Gear Assembly<BR> (For Front Gear Group)
3406B INDUSTRIAL & MARINE ENGINES
Idler Gear Shaft Pilot Bore
3406B INDUSTRIAL & MARINE ENGINES
Flywheel
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Runout
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing Bore
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing Runout
3406B INDUSTRIAL & MARINE ENGINES
Idler Gear Shaft Pilot Bore
3406C INDUSTRIAL & MARINE ENGINES
Flywheel
3406C INDUSTRIAL & MARINE ENGINES
Flywheel Adapter Group
3406C INDUSTRIAL & MARINE ENGINES
Flywheel Housing Runout
3406C INDUSTRIAL & MARINE ENGINES
Flywheel Runout
3406C INDUSTRIAL & MARINE ENGINES
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Flywheel
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3406B INDUSTRIAL & MARINE ENGINES
Flywheel
3406C INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Engine News
Self-Locking Bolts Used In Front Timing Gear Group
1988/11/01
Inspect For Correct Camshaft Idler Gear Shaft And Bolts{1206}
1995/01/01
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/09/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Checking The Alignment Of Timing Gear Marks On 3406 Engines{1206}
1997/01/22
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Improved Camshaft Gears Are Now Used on Certain 3406C, C15, and C18 Engines {1212}
Improved Camshaft Gears Are Now Used on Certain 3406C, C15, and C18 Engines {1212}
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Front (Timing) Gear Group
3406B INDUSTRIAL & MARINE ENGINES
Idler Gear Assembly<BR> (For Front Gear Group)
3406B INDUSTRIAL & MARINE ENGINES
Idler Gear Shaft Pilot Bore
3406B INDUSTRIAL & MARINE ENGINES
Front Housing And Covers
3406B INDUSTRIAL & MARINE ENGINES
Front Housing And Covers
3406C INDUSTRIAL & MARINE ENGINES
Front Gear Group (Timing)
3406C INDUSTRIAL & MARINE ENGINES
Idler Gear Shaft Pilot Bore
3406C INDUSTRIAL & MARINE ENGINES
Idler Gear Assembly (For Front Gear Group)
3406C INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Accessory Drive
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES
Timing Gears And Plate
3406B INDUSTRIAL & MARINE ENGINES
Timing Gear Cover
3406B INDUSTRIAL & MARINE ENGINES
Accessory Drive
3406C INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal &amp; Wear Sleeve
3406C INDUSTRIAL & MARINE ENGINES
Timing Gears &amp; Plate
3406C INDUSTRIAL & MARINE ENGINES
Timing Gear Cover
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Self-Locking Bolts Used In Front Timing Gear Group{1206}
1988/10/17
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Engine News
No Gaskets Used With Aluminum Flywheel Housings
1991/10/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
New Flywheel Housing Gasket For 3406 Engines {1157}
1999/03/01
Special Instruction
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Adapter Group (6N9829)
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing Bore
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing Runout
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing Cover
3406C INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3406C INDUSTRIAL & MARINE ENGINES
Flywheel Housing Bore
3406C INDUSTRIAL & MARINE ENGINES
Flywheel Housing Runout
3406C INDUSTRIAL & MARINE ENGINES
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Crankshaft Rear Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES
Flywheel
3406B INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal &amp; Wear Sleeve
3406C INDUSTRIAL & MARINE ENGINES
Flywheel Housing
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Engine News
Inspect For Correct Camshaft Idler Gear Shaft And Bolts{1206}
1995/01/01
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/09/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Idler Gear Assembly<BR> (For Front Gear Group)
3406B INDUSTRIAL & MARINE ENGINES
Idler Gear Shaft Pilot Bore
3406B INDUSTRIAL & MARINE ENGINES
Front Housing And Covers
3406B INDUSTRIAL & MARINE ENGINES
Front Housing And Covers
3406C INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Accessory Drive
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES
Timing Gears And Plate
3406B INDUSTRIAL & MARINE ENGINES
Timing Gear Cover
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal &amp; Wear Sleeve
3406C INDUSTRIAL & MARINE ENGINES
Timing Gear Cover
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Self-Locking Bolts Used In Front Timing Gear Group{1206}
1988/10/17
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02
Disassembly and Assembly
Engine Lifting Brackets (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Engine Lifting Brackets (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15
New Piston Pin Retainer Used
1982/02/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Crankshaft Seal Usage On 3400 Series Engines
1986/01/01
Fan Drive Pulley Group Components
1993/04/01
Inspect For Correct Camshaft Idler Gear Shaft And Bolts{1206}
1995/01/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts
1977/11/09
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Piston Pin Retainer Used{1214,1225}
1982/02/08
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Water Pump Has Improved Seal{1361}
1983/02/14
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Valve Lifter Assemblies Used In Valve Mechanism Groups{1209}
1983/10/31
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Inspection And Installation Procedures For Water Pump Shaft And Seals{1361,1389,1373}
1985/06/17
New Oil Seal And Coolant Seal Group Improve Service Life Of Engine Water Pump{1361,1389,1373}
1985/06/17
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Piston Pin Bearing Used In Connecting Rod Assembly{1218}
1977/04/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Recommendations For Reusability Of Pistons With Crater Rim Cracks{1214}
1987/06/29
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Recommendations For Bearing Lubrication And Adjustment{3055}
1988/08/08
Self-Locking Bolts Used In Front Timing Gear Group{1206}
1988/10/17
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/01/30
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improvements Made To Water Pumps; New Groups/Parts Available For Certain Applications{1364,1361}
1990/02/19
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Improved Seals Used; Seal Replacement In Folded Core Radiators{1353}
1990/06/04
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Piston Pin Retainer Used{1225}
1991/10/14
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Liner Seat Inserts Available{1217}
1992/11/09
Fan Drive Pulley Group Components{1359}
1993/04/12
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Technical Information Bulletin
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Engine News
Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed{1153}
1996/05/09
Disassembly and Assembly
Engine Front Support
3406B INDUSTRIAL & MARINE ENGINES
Engine Rear Support
3406B INDUSTRIAL & MARINE ENGINES

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.