3406B INDUSTRIAL ENGINE 6TB09166-09856 LUBRICATION SYSTEM Caterpillar SIS




INDUSTRIAL ENGINE 3406B INDUSTRIAL ENGINE 6TB
 3406B INDUSTRIAL ENGINE 6TB09166-09856 SEBP2558 3406B 6TB   (1983)

Parts group 3406B:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
BREATHER GP
9Y-2989 BREATHER GP
9Y2989 BREATHER GP
AN ATTACHMENT
BREATHER GP
2N-8220 BREATHER GP
2N8220 BREATHER GP
FUMES DISPOSAL GP
4N-2743 FUMES DISPOSAL GP
4N2743 FUMES DISPOSAL GP
FUMES DISPOSAL GP
4N-1288 FUMES DISPOSAL GP
4N1288 FUMES DISPOSAL GP
AN ATTACHMENT
FUMES DISPOSAL GP
9N-2517 FUMES DISPOSAL GP
9N2517 FUMES DISPOSAL GP
FUMES DISPOSAL GP
5N-7430 FUMES DISPOSAL GP
5N7430 FUMES DISPOSAL GP
FOR USE WITH 7N9944 AND 7N9945 RADIATOR GPS
AN ATTACHMENT
FUMES DISPOSAL GP
9N-3425 FUMES DISPOSAL GP
9N3425 FUMES DISPOSAL GP
RH-FRONT
FILLER GP-ENGINE OIL
FILLER GP-OIL
6N-1016 FILLER GP-OIL
6N1016 FILLER GP-OIL
CANNOT BE USED WITH 7N8085 TRANSMISSION OIL COOLER
ALSO AN ATTACHMENT
FILLER GP-ENGINE OIL
2W-7201 FILLER GP-ENGINE OIL
2W7201 FILLER GP-OIL
LH.
CANNOT BE USED WITH 5N9337 GOVERNOR CONTROL GP (AIR ACTUATED)
ALSO AN ATTACHMENT
FILLER GP-OIL
7N-8488 FILLER GP-OIL
7N8488 FILLER GP-OIL
RH-FRONT
FOR USE WITH BELT TIGHTENER
AN ATTACHMENT
FILLER GP-OIL
7N-6822 FILLER GP-OIL
7N6822 FILLER GP-OIL
RH-FRONT
FOR USE WITH BELT TIGHTENER
AN ATTACHMENT
FILTER GP-ENGINE OIL
BASE GP-OIL FILTER
121-2471 BASE GP-OIL FILTER
1212471 BASE GP-OIL FILTER
PART OF 1212472 FILTER-ENGINE OIL
AN ATTACHMENT
BASE GP-OIL FILTER
9Y-4872 BASE GP-OIL FILTER
9Y4872 BASE GP-OIL FILTER
REPLACED BY 1212471-PAGE 153
PART OF 1109159 FILTER-ENGINE OIL
AN ATTACHMENT
FILTER GP-ENGINE OIL
4N-0731 FILTER GP-ENGINE OIL
4N0731 FILTER GP-ENGINE OIL
S/N 6TB9166-UP
6I-1393 FILTER GP-ENGINE OIL
6I1393 FILTER GP-ENGINE OIL
TYPE 1
AN ATTACHMENT
FILTER GP-ENGINE OIL
6I-1393 FILTER GP-ENGINE OIL
6I1393 FILTER GP-ENGINE OIL
TYPE 2
AN ATTACHMENT
FILTER GP-ENGINE OIL
6I-1393 FILTER GP-ENGINE OIL
6I1393 FILTER GP-ENGINE OIL
TYPE 3
1109159-PAGE 163
AN ATTACHMENT
FILTER GP-ENGINE OIL
110-9159 FILTER GP-ENGINE OIL
1109159 FILTER GP-ENGINE OIL
9Y4872-PAGE 153
PART OF 4N0731, 6I1393 FILTER-ENGINE OIL
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-9951 GAUGE GP-OIL LEVEL (DIPSTICK)
4N9951 GAUGE GP-OIL LEVEL (DIPSTICK)
LH. FOR USE WITH FRONT OR REAR SUMP STANDARD OIL PAN
NOT FOR USE WITH HIGH CAPACITY OIL PAN
ALSO AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-0748 GAUGE GP-OIL LEVEL (DIPSTICK)
4N0748 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
6N-2282 GAUGE GP-OIL LEVEL (DIPSTICK)
6N2282 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
4W-3924 GAUGE GP-OIL LEVEL (DIPSTICK)
4W3924 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
7N-8084 GAUGE GP-OIL LEVEL (DIPSTICK)
7N8084 GAUGE GP-OIL LEVEL (DIPSTICK)
FOR USE WITH 7N8085 TRANSMISSION OIL COOLER GP & REAR SUMP OIL PAN
PART OF 2W4125 COOLER AR-TRANSMISSION OIL
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
7N-0166 GAUGE GP-OIL LEVEL (DIPSTICK)
7N0166 GAUGE GP-OIL LEVEL (DIPSTICK)
LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
1W-8342 LINES GP-ENGINE OIL
1W8342 LINES GP-ENGINE OIL
EXTERNAL
LINES GP-ENGINE OIL
4N-1128 LINES GP-ENGINE OIL
4N1128 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
9N-2282 LINES GP-ENGINE OIL
9N2282 LINES GP-ENGINE OIL
S/N 6TB9166-UP
LINES GP-ENGINE OIL
7W-9010 LINES GP-ENGINE OIL
7W9010 LINES GP-ENGINE OIL
REMOTE FILTER
AN ATTACHMENT
LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-4073 LINES GP-TURBOCHARGER OIL
4N4073 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-8808 LINES GP-TURBOCHARGER OIL
1W8808 LINES GP-TURBOCHARGER OIL
FOR USE IN UNDERGROUND MINING APPLICATIONS
PART OF 2W4125 TRANSMISSION OIL COOLER AR-TRANSMISSION
AN ATTACHMENT
LINES GP-TURBOCHARGER OIL
9N-0013 LINES GP-TURBOCHARGER OIL
9N0013 LINES GP-TURBOCHARGER OIL
S/N 6TB9166-UP
ALSO AN ATTACHMENT
LINES GP-TURBOCHARGER OIL
4N-5394 LINES GP-TURBOCHARGER OIL
4N5394 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
9Y-0581 LINES GP-TURBOCHARGER OIL
9Y0581 LINES GP-TURBOCHARGER OIL
COVER GP-TURBOCHARGER DRAIN
4N-5489 COVER GP-TURBOCHARGER DRAIN
4N5489 COVER GP-TURBOCHARGER DRAIN
PUMP GP-ENGINE OIL
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
4N2481 FASTENER GP-OIL PUMP MOUNTING
PUMP GP-ENGINE OIL
4N-0733 PUMP GP-ENGINE OIL
4N0733 PUMP GP-ENGINE OIL*R

Information:

(For parts list, see above)

Technical Information Bulletin
Excessive Blow-By And Oil Consumption Complaints
Excessive Blow-By And Oil Consumption Complaints
Specifications
Breather Cap
3406B INDUSTRIAL & MARINE ENGINES
Breather Cap
3406C INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Engine News
Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group
1984/02/22
Improved Air Pipe And New Valve Assembly Used In Air Shut-Off Group
1992/01/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation Of 4W1979 Shut-Off Group{1704}
Installation Of 4W1979 Shut-Off Group{1704}
Disassembly and Assembly
Oil Filler Pipe (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install
1987/02/01
New Engine Oil Coolers Have Rubber End Sheets
1988/02/01
New Oil Change Recommendations For Severe Applications
1989/08/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Installation Procedure For 1R-0716 Engine Oil Filter {1318}
1994/06/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
New High Efficiency Oil Filters are Now Available {1308}
2004/03/01
Special Instruction
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Oil Filter
3406B INDUSTRIAL & MARINE ENGINES
Oil Filter Group - L.H.
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Engine Oil Filters And Bypass Valves
3406C INDUSTRIAL & MARINE ENGINES
Engine Oil Filter Group
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Filter Base
3406B INDUSTRIAL & MARINE ENGINES
Oil Filter Base
3406B INDUSTRIAL & MARINE ENGINES
Oil Filter Base (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Oil Filter Base (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Oil Cooler (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Oil Cooler (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/01/25
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
New High Efficiency Oil Filters are Now Available {1308}
2004/03/22
New High Efficiency Oil Filters are Now Available {1308}
2006/08/21
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Disassembly and Assembly
Dipstick Assembly (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Dispstick Assembly (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Engine News
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans
1991/06/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Specifications
Oil Filter
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Engine News
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
A New Drain Line for the Turbocharger is Now Used {1052, 1307}
2008/03/17
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Engine News
Visual Checks And Easy Tests Can Be Of Assistance When Troubleshooting Coolant Leakage Into The Lubrication System
1980/07/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
New Oil Change Recommendations For Severe Applications
1989/08/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
Service Magazine
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Remanufactured Oil Pumps Available{1304}
1984/06/04
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Special Instruction
Installation and Operation of the Cat QuickEvac<SUP>TM</SUP> System{0707, 1325}
Installation and Operation of the Cat QuickEvacTM System{0707, 1325}
Supplement to the Operation and Maintenance Manual{0707}
Supplement to the Operation and Maintenance Manual{0707}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New Cat QuickEvac<SUP>TM</SUP> High Speed Oil Change Arrangements Are Available {1302, 1372}
2003/03/10
New QuickEvac High Speed Oil Change Arrangements Are Available {1325}
2006/09/25
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Disassembly and Assembly
Sump Pump
3406B INDUSTRIAL & MARINE ENGINES
Engine News
Different O-Ring Seal Now Used On The Oil Pump Suction Tube
1980/12/10
Remanufactured Oil Pumps Available
1984/06/20
New Oil Pump Gears Used
1986/07/01
Procedure To Retain Oil Pump When The Cylinder Block Pump Mounting Pad Is Broken
1991/05/01
New Oil Pump Group Used{1304}
1999/04/01
Special Instruction
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
3400 Engine Oil Pumps{1304}
3400 Engine Oil Pumps{1304}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Technical Information Bulletin
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Specifications
Oil Pump
3406B INDUSTRIAL & MARINE ENGINES
Gauge For Transmission Oil Pressure<BR> (1W4126)
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Engine Oil Pump
3406C INDUSTRIAL & MARINE ENGINES
Oil Pressure Indicator
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Sending Units For Oil Pressure Indicator
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Disassembly and Assembly
Sump Pump
3406B INDUSTRIAL & MARINE ENGINES
Oil Pump
3406B INDUSTRIAL & MARINE ENGINES
Oil Pump
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Remanufactured Oil Pumps Available{1304}
1984/06/04
New Oil Pump Gears Used {1304}
1986/07/07
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Procedure To Retain Oil Pump When Pump Mounting Pad On Cylinder Block Is Broken{1201,1304}
1991/05/20
Different Housings are Used on 3400 Remanufactured Engines {1304}
2007/04/02
Disassembly and Assembly
Sump Pump
3406B INDUSTRIAL & MARINE ENGINES
Sump Pump
3406C INDUSTRIAL & MARINE ENGINES
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Engine News
Oil Total Base Number (TBN) Test Kit Available
1986/02/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States