ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRONICS GP-ENGINE
ELECTRONICS GP-COMMUNICATION
ELECTRONICS GP-ENGINE
ELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP25630280
221-9506: CONNECTOR AS
221-9506 CONNECTOR AS -ELECTRONIC CONTROL
REPLACED BY 346-1577 CONNECTOR
FOR USE WITH MULTI-STATION CONTROL SYSTEM
AN ATTACHMENT
REPLACED BY 346-1577 CONNECTOR
FOR USE WITH MULTI-STATION CONTROL SYSTEM
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP25630281
117-2752: CONTROL & MTG GP-ENGINE ELEK
117-2752 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 212-9449 | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 6V-6703 M | [2] | KIT-RETAINING BOLT (ENGINE ELECTRONIC CONTROL) | ||
| (EACH INCLUDES BOLT, RETAINING RING AND O-RING SEALS) | ||||
| 126-7574 | [1] | SCREW-PAN HEAD (8-32X9.52-MM) | ||
| 7X-6315 | [1] | STRAP AS-GROUND | ||
| 2. | 8T-0276 M | [4] | BOLT (M8X1.25X45-MM) | |
| 3. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 4. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 6. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 7. | 6V-3964 | [1] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 8. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 9. | 5P-7970 M | [1] | NUT (M8X1.25-THD) | |
| M | METRIC PART | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#SEBP25630282
124-2673: CONTROL & MTG GP-ENGINE ELEK
124-2673 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-3055 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 2. | 8T-0276 M | [4] | BOLT (M8X1.25X45-MM) | |
| 3. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 4. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 6. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 7. | 6V-3964 | [1] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 8. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| 9. | 5P-7970 M | [1] | NUT (M8X1.25-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25630283
256-7511: CONTROL GP-COMMUNICATION
256-7511 CONTROL GP-COMMUNICATION -PL1000T
FOR USE WITH @@@@@270-1732@@@@@
AN ATTACHMENT
FOR USE WITH @@@@@270-1732@@@@@
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS#SEBP25630284
256-7512: CONTROL GP-COMMUNICATION
256-7512 CONTROL GP-COMMUNICATION -PL1000E
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 335-6885 | [1] | FILM-WARNING (CSA CONTROL PANEL APPROVAL) |
#SEBP25630285
115-3055: CONTROL GP-ENGINE ELECTRONIC
115-3055 CONTROL GP-ENGINE ELECTRONIC
PART OF 124-2673 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
PART OF 124-2673 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 212-9450 J | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 126-7574 | [1] | SCREW-PAN HEAD (8-32X9.52-MM) | ||
| 7X-6315 | [1] | STRAP AS-GROUND | ||
| 134-4126 | [1] | WASHER (4.52X8.28X0.76-MM THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 6V-6703 JM | [2] | KIT-RETAINING BOLT (ENGINE ELECTRONIC CONTROL) | ||
| (EACH KIT INCLUDES BOLT, RING & SEALS) | ||||
| J | KIT MARKED J SERVICE(S) PARTS MARKED J | |||
| M | METRIC PART | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#SEBP25630286
121-7028: CONTROL GP-ENGINE ELECTRONIC
121-7028 CONTROL GP-ENGINE ELECTRONIC -THROTTLE POSITION
CANNOT BE USED WITH @@@@@ 9X-9647@@@@@
AN ATTACHMENT
CANNOT BE USED WITH @@@@@ 9X-9647@@@@@
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 121-7029 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25630287
121-7029: CONTROL GP-ENGINE ELECTRONIC
121-7029 CONTROL GP-ENGINE ELECTRONIC -THROTTLE POSITION
PART OF 121-7028 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT
PART OF 121-7028 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS#SEBP25630288
219-8024: CONTROL GP-ENGINE SPEED
219-8024 CONTROL GP-ENGINE SPEED -ELECTRONIC TROLL PROCESSOR
FOR USE WITH MULTI-STATION CONTROL SYSTEM
AN ATTACHMENT
FOR USE WITH MULTI-STATION CONTROL SYSTEM
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP25630289
256-4883: CONTROL GP-ENGINE SPEED
256-4883 CONTROL GP-ENGINE SPEED -ELECTRONIC TROLL PROCESSOR
FOR USE WITH MULTI-STATION CONTROL SYSTEM
AN ATTACHMENT
FOR USE WITH MULTI-STATION CONTROL SYSTEM
AN ATTACHMENT
Parts for your 3196 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/01
2000/04/01
Special Instruction
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Certain 225-6118 Harnesses (Caterpillar Data Link) Used with the Plug and Run Wiring System May Contain Shielding
Certain 225-6118 Harnesses (Caterpillar Data Link) Used with the Plug and Run Wiring System May Contain Shielding
Certain 225-6118 Harnesses (Caterpillar Data Link) Used with the Plug and Run Wiring System May Contain Shielding
Certain 225-6118 Harness Cables Used with the Plug and Run Wiring System (Caterpillar Data Link) May Need to be Rewired
Certain 225-6118 Harness Cables Used with the Plug and Run Wiring System (Caterpillar Data Link) May Need to be Rewired
Certain 225-6118 Harness Cables Used with the Plug and Run Wiring System (Caterpillar Data Link) May Need to be Rewired
Certain 40-Pin to 70-Pin Adapter Harnesses That Are Used With a Troll Processor May Need to Be Rewired
Certain 40-Pin to 70-Pin Adapter Harnesses That Are Used With a Troll Processor May Need to Be Rewired
Certain 40-Pin to 70-Pin Adapter Harnesses That Are Used With a Troll Processor May Need to Be Rewired
Specifications
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Wiring Harness
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electrical Connector - Inspect
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Wiring Harness (Open Circuit) - Test
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Wiring Harness (Short Circuit) - Test
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Troubleshooting
Connector Locations
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Service Magazine