OPERATOR STATION
FILTER GP-CAB AIRPANEL GP
PROTECTION GP-VANDALISM
HEATER GP
INSTALLATION GP-CONTROLS
OPERATOR STATION
FILTER GP-CAB AIR
#SEBP25660720
119-4769: FILTER GP-CAB AIR
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS#SEBP25660721
119-4769: FILTER GP-CAB AIR
For full view, you need register
#SEBP25660722
155-5234: GAUGE GP-FUEL LEVEL
155-5234 GAUGE GP-FUEL LEVEL
S/N 4YS1028-UP
24-VOLT
PART OF 113-3644 PANEL GP-INSTRUMENT
ALSO AN ATTACHMENT
S/N 4YS1028-UP
24-VOLT
PART OF 113-3644 PANEL GP-INSTRUMENT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS#SEBP25660723
137-6351: GUARD GP-VANDALISM
137-6351 GUARD GP-VANDALISM
S/N 4YS1-UP
PART OF 135-2506 OPERATOR AR-OPEN ROPS
AN ATTACHMENT
S/N 4YS1-UP
PART OF 135-2506 OPERATOR AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 246-2641 | [3] | PADLOCK GP | |
| (EACH INCLUDES) | ||||
| 5P-8500 | [1] | KEY | ||
| 2. | 131-1240 | [1] | PLATE AS | |
| 3. | 136-6980 | [1] | PLATE AS | |
| 4. | 136-6982 | [1] | PLATE | |
| 5. | 136-6984 | [1] | PLATE | |
| 6. | 145-1135 | [1] | PLATE | |
| 7. | 145-1136 | [1] | PLATE | |
| 8. | 145-1140 | [1] | PLATE | |
| 9. | 145-5607 | [1] | PLATE AS | |
| 10. | 123-0708 M | [4] | SCREW-HEX SOCKET (M4X0.7X30-MM) | |
| M | METRIC PART | |||
#SEBP25660724
107-4629: HEATER & MTG GP-CAB
107-4629 HEATER & MTG GP-CAB -WITH CABLE CONTROL
S/N 4YS1-1362
PART OF 135-2505 CAB AR-ENCLOSED ROPS
S/N 4YS1-1362
PART OF 135-2505 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-5643 BD | SEAL | ||
| 2. | 107-3317 Y | [1] | HEATER GP-CAB | |
| 3. | 156-4449 | [1] | CABLE AS (HEATER TEMPERATURE CONTROL) | |
| 2H-3920 | [2] | LOCKWASHER | ||
| 6V-8369 | [1] | NUT (7/16-28-THD) | ||
| 143-8874 | [1] | BOOT | ||
| 4. | 118-7259 | [1] | GASKET | |
| 5. | 7X-0579 | [11] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 6. | 8T-4908 M | [11] | BOLT (M8X1.25X25-MM) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25660725
107-4629: HEATER & MTG GP-CAB
107-4629 HEATER & MTG GP-CAB -WITH CABLE CONTROL
S/N 4YS1363-UP
PART OF 135-2505 CAB AR-ENCLOSED ROPS
S/N 4YS1363-UP
PART OF 135-2505 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-5643 D | SEAL (1.6-M) | ||
| 2. | 180-9874 CY | [1] | HEATER GP-CAB | |
| 3. | 156-4449 | [1] | CABLE AS (HEATER TEMPERATURE CONTROL) | |
| 2H-3920 | [2] | LOCKWASHER | ||
| 6V-8369 | [1] | NUT (7/16-28-THD) | ||
| 143-8874 | [1] | BOOT | ||
| 4. | 118-7259 | [1] | GASKET | |
| 5. | 7X-0579 | [11] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 6. | 8T-4908 M | [11] | BOLT (M8X1.25X25-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25660726
107-3317: HEATER GP-CAB
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-6522 | [1] | GROMMET | |
| 2. | 2S-3745 | [6] | SCREW-TAPPING (10-16X0.5-IN) | |
| 3. | 3E-1841 | [1] | LEVER | |
| 4. | 136-1953 E | HOSE (15-CM) | ||
| 4A. | 136-1953 E | HOSE (23-CM) | ||
| 4B. | 136-1953 E | HOSE (18-CM) | ||
| 5. | 3S-2093 | [2] | STRAP-CABLE | |
| 6. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 7. | 8T-0154 | [6] | CLAMP-HOSE | |
| 8. | 8T-5372 D | SEAL (0.12-M EACH) | ||
| 8A. | 8T-5372 D | SEAL (0.15-M) | ||
| 9. | 6V-1392 D | SEAL (0.6-M) | ||
| 9A. | 6V-1392 D | SEAL (0.07-M EACH) | ||
| 10. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 11. | 8C-4586 | [2] | CLAMP | |
| 12. | 8C-8451 M | [1] | BOLT (M6X1X40-MM) | |
| 13. | 8C-8457 M | [1] | SCREW-MACHINE (M5X0.8X14-MM) | |
| 14. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 17. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 18. | 8Y-5737 | [1] | CLAMP | |
| 19. | 9G-1950 | [1] | RESISTOR | |
| 20. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 21. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 22. | 9X-8498 M | [1] | BOLT (M6X1X180-MM) | |
| 23. | 037-4426 | [1] | RETAINER | |
| 24. | 100-3143 | [2] | PLATE-ORIFICE | |
| 25. | 100-3426 | [2] | WHEEL AS-BLOWER | |
| (EACH INCLUDES) | ||||
| 037-4838 | [2] | CLAMP | ||
| 26. | 112-9565 J | [1] | MOTOR AS-BLOWER | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 27. | 113-0302 | [1] | COIL AS-HEATER | |
| 28. | 114-3140 | [1] | GROMMET | |
| 29. | 118-5044 | [1] | HARNESS AS-WIRING (CAB HEATER) | |
| 6T-6505 | [5] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
| 9W-0852 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACVLE AS & WEDGE) | ||||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 6T-6506 | [5] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 30. | 118-5046 | [1] | HOUSING AS | |
| 31. | 123-8851 | [1] | CASE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 32. | 124-8493 | [2] | GASKET | |
| 33. | 124-8494 | [1] | GASKET | |
| 34. | 124-8495 | [1] | VALVE AS-WATER | |
| 35. | 126-8542 | [1] | FRAME AS-FILTER | |
| 36. | 151-0894 | [1] | COVER AS | |
| 37. | 127-8613 | [1] | GASKET | |
| 38. | 129-3178 M | [3] | LOCKNUT (M6X1-THD) | |
| 39. | 102-0341 | [1] | CLIP (TAB) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9G-0398 J | [1] | KIT-MOTOR BRUSH (CONDENSER FAN MOTOR) | ||
| (INCLUDES BRUSHES & BRUSH CAPS) | ||||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICE(S) PARTS MARKED J | |||
| M | METRIC PART | |||
#SEBP25660727
107-3317: HEATER GP-CAB
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-6522 | [1] | GROMMET | |
| 2. | 2S-3745 | [6] | SCREW-TAPPING (10-16X0.5-IN) | |
| 3. | 3E-1841 | [1] | LEVER | |
| 4. | 3S-2093 | [2] | STRAP-CABLE | |
| 5. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 6. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 7. | 8C-4586 | [2] | CLAMP | |
| 8. | 8C-8457 M | [1] | SCREW-MACHINE (M5X0.8X14-MM) | |
| 9. | 8T-0154 | [6] | CLAMP-HOSE | |
| 10. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 11. | 8T-4205 | [11] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 8Y-5737 | [1] | CLAMP | |
| 13. | 9G-1950 | [1] | RESISTOR | |
| 14. | 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 15. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 16. | 037-4426 | [1] | RETAINER | |
| 17. | 100-3143 | [2] | PLATE-ORIFICE | |
| 18. | 100-3426 | [2] | WHEEL AS-BLOWER | |
| (EACH INCLUDES) | ||||
| 037-4838 | [2] | CLAMP | ||
| 19. | 102-0341 | [1] | CLIP (TAB) | |
| 20. | 113-0302 | [1] | COIL AS-HEATER | |
| 21. | 114-3140 | [1] | GROMMET | |
| 22. | 118-5044 | [1] | HARNESS AS-WIRING (CAB HEATER) | |
| 6T-6505 | [5] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
| 9W-0852 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 6T-6506 | [5] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 23. | 118-5046 | [1] | HOUSING AS | |
| 24. | 124-8494 | [1] | GASKET | |
| 25. | 124-8495 | [1] | VALVE AS-WATER | |
| 26. | 126-8542 | [1] | FRAME AS-FILTER | |
| 27. | 127-8613 C | [1] | GASKET | |
| 28. | 129-3178 M | [3] | LOCKNUT (M6X1-THD) | |
| 29. | 141-9784 CM | [1] | BOLT (M6X1X190-MM) | |
| 30. | 151-0894 | [1] | COVER AS | |
| 31. | 156-6819 C | [1] | CASE AS | |
| 6V-9632 M | [7] | NUT-WELD (M6X1-THD) | ||
| 32. | 174-1486 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 33. | 6V-7728 M | [1] | BOLT (M6X1X45-MM) | |
| 34. | 5P-5673 CD | SEAL (2.3-M) | ||
| 34A. | 5P-5673 CD | SEAL (2.1-M) | ||
| 35. | 136-1953 E | HOSE (15-CM) | ||
| 35A. | 136-1953 E | HOSE (23-CM) | ||
| 35B. | 136-1953 E | HOSE (18-CM) | ||
| 36. | 8T-5372 CD | SEAL (0.12-M EACH) | ||
| 36A. | 8T-5372 D | SEAL (0.15-M) | ||
| 37. | 6V-1392 D | SEAL (0.6-M) | ||
| 37A. | 6V-1392 CD | SEAL (0.07-M EACH) | ||
| 38. | 5P-5905 D | SEAL (0.12-M) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP25660728
180-9874: HEATER GP-CAB
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-5908 D | SEAL (0.1-M) | ||
| 2. | 3E-1841 | [1] | LEVER | |
| 3. | 3S-2093 | [2] | STRAP-CABLE | |
| 4. | 8C-4586 | [2] | CLAMP | |
| 5. | 8Y-5737 | [1] | CLAMP | |
| 6. | 9G-1950 | [1] | RESISTOR | |
| 7. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 8. | 9X-2488 | [6] | CLAMP-HOSE | |
| 9. | 100-3143 | [2] | PLATE-ORIFICE | |
| 10. | 100-3426 | [2] | WHEEL AS-BLOWER | |
| (EACH INCLUDES) | ||||
| 037-4838 | [2] | CLAMP | ||
| 11. | 102-0341 | [1] | CLIP (TAB) | |
| 12. | 114-3140 | [1] | GROMMET | |
| 13. | 118-5044 | [1] | HARNESS AS-WIRING (CAB HEATER) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 6T-6505 | [5] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
| 6T-6506 | [5] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 14. | 118-5046 | [1] | HOUSING AS (CAB) | |
| 15. | 124-8494 | [1] | GASKET | |
| 16. | 124-8495 | [1] | VALVE AS-WATER (CAB HEATER) | |
| 17. | 151-0894 | [1] | COVER AS | |
| 18. | 156-6819 | [1] | CASE AS | |
| 6V-9632 M | [9] | NUT-WELD (M6X1-THD) | ||
| 19. | 174-1486 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE & WEDGE) | ||||
| 20. | 183-7528 | [1] | COIL AS-HEATER | |
| 21. | 037-4426 | [1] | RETAINER | |
| 22. | 129-3178 M | [3] | LOCKNUT (M6X1-THD) | |
| 23. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 24. | 1P-6522 | [1] | GROMMET | |
| 25. | 2S-3745 | [6] | SCREW-TAPPING (10-16X0.5-IN) | |
| 26. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 27. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 28. | 6V-7728 M | [1] | BOLT (M6X1X45-MM) | |
| 29. | 8C-8457 M | [1] | SCREW-MACHINE (M5X0.8X14-MM) | |
| 30. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 31. | 8T-4205 | [11] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 32. | 9X-2044 M | [1] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 33. | 136-1953 E | HOSE (56-CM) | ||
| 34. | 8T-5372 D | SEAL (0.4-M) | ||
| 35. | 6V-1392 D | SEAL (0.8-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP25660729
133-5668: INSTALLATION GP-GOV CONTROL
133-5668 INSTALLATION GP-GOV CONTROL
S/N 4YS1-UP
PART OF 127-3262 OPERATOR AR-ENCLOSED ROPS, 135-2506 OPERATOR AR-OPEN ROPS
Type 1
ALSO AN ATTACHMENT
S/N 4YS1-UP
PART OF 127-3262 OPERATOR AR-ENCLOSED ROPS, 135-2506 OPERATOR AR-OPEN ROPS
Type 1
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 938G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-9264 BD | SEAL | ||
| 2. | 6K-8180 | [1] | GROMMET | |
| 3. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 6V-7743 M | [1] | LOCKNUT (M6X1-THD) | |
| 6. | 8C-3111 | [1] | ROD END | |
| 7. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 8. | 140-6705 | [1] | CABLE AS | |
| 9. | 8T-4742 | [1] | END-YOKE ROD | |
| 10. | 8T-4744 | [1] | PIN AS-SPRING | |
| 11. | 7K-1181 | [2] | STRAP-CABLE | |
| 12. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
Information:
OPERATOR STATION
FILTER GP-CAB AIR
Operation and Maintenance Manual
Special Instruction
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Service Magazine
