AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

134-5204 ROPS GP-ENCLOSED S/N 1EW700-99999 PART OF 134-5969 CAB AR 972G WHEEL LOADER


OPERATOR STATION
CAB GP
SEAT GP
CAB GP
SUPPORT GP

WHEEL LOADER 972G WHEEL LOADER 1EW
 972G Wheel Loader 1EW00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2571 972G 1EW   (1997)

OPERATOR STATION

CAB GP
133-2310 OPERATOR AR
ROPS GP-ENCLOSED
134-5204 ROPS GP-ENCLOSED
ROPS GP-ENCLOSED
134-5204 ROPS GP-ENCLOSED
STEERING COLUMN GP
156-0549 STEERING COLUMN GP
VISOR GP-CAB
131-2633 VISOR GP-CAB
 

#SEBP25710620
 

134-5204: ROPS GP-ENCLOSED

134-5204 ROPS GP-ENCLOSED
S/N 1EW700-99999
PART OF 134-5969 CAB AR
i01507525 SEBP2571
1345204 ROPS GP-ENCLOSED Parts scheme 1345204 ROPS GP-ENCLOSED Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0318 B [3] SHIM (0.8-MM THK)  
2. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
3. 100-7488 [1] CHANNEL  
4. 192-3276 C [1] BRACKET AS  
5. 107-4594 [1] CHANNEL AS  
6. 143-2239 [1] SHEET AS  
7. 107-4600 [1] GLASS (RIGHT SIDE, REAR)  
8. 107-4601 [1] GLASS (REAR)  
9. 107-4602 [1] GLASS (LEFT SIDE, REAR)  
10. 107-4603 [1] GLASS (FRONT)  
11. 107-4604 [1] GLASS (FRONT, RH)  
12. 107-4605 [1] GLASS (FRONT, LH)  
13. 107-7306 [1] SHEET AS  
14. 148-5247 [1] BRACKET  
15. 109-5008 [4] BUMPER-CONICAL  
16. [1] PLATFORM AS  
17. 111-0687 [1] STRIKER AS  
18. 112-9303 [1] TRIM (RH)  
19. 112-9304 [1] TRIM (LH)  
20. 112-9305 [1] TRIM  
21. 114-9252 [1] BRACKET AS  
22. 115-0538 [1] COVER  
23. 121-9869 [1] PLATE  
24. 122-0364 [1] PLATE  
25. 126-1052 [1] PIN  
26. 149-1162 [1] PLATE AS (RH)  
27. 149-1163 [1] PLATE AS (LH)  
28. 158-5919 [1] PLATE AS  
29. 125-6510 [1] INSULATION  
30. 125-7141 [1] COVER  
31. 125-7142 [1] COVER  
32. 125-7156 [1] TRIM  
33. 125-7157 [1] TRIM  
34. 126-6016 B [2] SEAL  
35. 128-1026 [1] SHIELD-STRIKER  
36. 162-5296 [1] BAR  
37. 131-1269 [1] DOOR AS  
  1V-6755 [1] LATCH AS  
  111-1316 [1] HINGE  
38. 134-5205 [1] CAB AS  
39. 136-9351 [1] TRIM (RH)  
40. 136-9352 [1] TRIM (LH)  
41. 138-7066 Y [1] DOOR GP-CAB (LH)  
42. 148-5245 Y [1] DOOR GP-CAB (RH)  
43. 5C-7261 M [6] NUT (M8X1.25-THD)  
44. 8T-4121 [30] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4133 M [4] NUT (M10X1.5-THD)  
46. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
47. 8T-4137 M [22] BOLT (M10X1.5X20-MM)  
48. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
49. 8T-7963 M [2] LOCKNUT (M8X1.25-THD)  
51. 6H-3956 [1] PIN  
54. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25710621
 

122-4617: SEAT BELT GP

122-4617 SEAT BELT GP
S/N 1EW1-UP
RETRACTABLE
PART OF 113-1011 SEAT GP
i00702276 SEBP2571
1224617 SEAT BELT GP Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-6432 [1] LOCKNUT (7/16-20-THD)  
2. 8T-5360 [1] WASHER (12X22.5X2.5-MM THK)  
3. 8Y-5953 [1] BOLT (7/16-20X1.5-IN)  
4. 1A-4350 [1] BOLT (7/16-20X1.75-IN)  
 

#SEBP25710622
 

156-1148: SEAT BELT GP

156-1148 SEAT BELT GP
S/N 1EW1-99999
76.2 (3-IN)
PART OF 113-1011 SEAT GP
i01140528 SEBP2571
1561148 SEAT BELT GP Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-9080 [1] BOLT (7/16-20X1.5-IN)  
2. 8T-5360 [1] WASHER (12X22.5X2.5-MM THK)  
3. 1A-4350 [1] BOLT (7/16-20X1.75-IN)  
4. 4D-6432 [1] LOCKNUT (7/16-20-THD)  
 

#SEBP25710623
 

113-1011: SEAT GP

113-1011 SEAT GP
S/N 1EW1-UP
PART OF 109-8200 SEAT GP-SUSPENSION
i00707630 SEBP2571
1131011 SEAT GP Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6883 Y [1] EXTENSION GP-BACKREST (CLOTH)  
2. 130-8966 Y [1] SEAT GP (CLOTH)  
3. 122-4617 CY [1] SEAT BELT GP (RETRACTABLE)  
4. 130-8967 Y [1] ARMREST GP  
5. 130-2321 C [1] WASHER (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25710624
 

113-1011: SEAT GP

113-1011 SEAT GP
S/N 1EW1-99999
PART OF 109-8200 SEAT GP-SUSPENSION
i01157775 SEBP2571
1131011 SEAT GP Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6883 Y [1] EXTENSION GP-BACKREST (CLOTH)  
2. 130-8966 Y [1] SEAT GP (CLOTH)  
3. 156-1148 CY [1] SEAT BELT GP (RETRACTABLE, 3-IN)  
4. 130-8967 Y [1] ARMREST GP  
5. 130-2321 [1] WASHER (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25710625
 

130-8966: SEAT GP

130-8966 SEAT GP -CLOTH
S/N 1EW1-99999
LUMBAR
PART OF 113-1011 SEAT GP
i00190999 SEBP2571
1308966 SEAT GP Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-5947 JN [4] FASTENER  
2. 8Y-5992 Y [1] PAN GP-SEAT  
3. 113-0899 L [10] SCREW-FLAT HEAD (6-20X0.5-IN)  
4. 119-7127 [1] CUSHION AS (BACK)  
5. 8Y-5929 [1] PLATE AS-SLIDE  
  4K-9097 [7] NUT-WELD (5/16-18-THD)  
6. 8Y-5930 [1] BAR AS  
7. 8Y-5931 [1] BAR AS  
8. 8S-7803 [2] RING-RETAINING  
9. 8Y-5932 [1] LATCH AS  
10. 8Y-5936 [1] SPRING  
11. 095-0878 [1] PIN-SPRING  
12. 116-6527 [1] BRACKET AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
13. 8Y-5938 [1] BRACKET AS (LH)  
  4D-6432 [1] LOCKNUT (7/16-20-THD)  
14. 2K-4973 [6] LOCKNUT (3/8-16-THD)  
  7U-4898 [6] SCREW (3/8-16X0.75-IN)  
15. 8Y-5979 [1] PIN  
16. 6V-2456 [2] RING-RETAINING  
17. 8Y-6833 [1] SPRING (RH)  
18. 8Y-6834 [1] SPRING (LH)  
19. 1C-0569 [2] BOLT (5/16-18X0.5-IN)  
20. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
21. 7X-0320 [1] BOLT (7/16-14X5-IN)  
22. 8Y-5928 [2] SPRING  
23. 8Y-5981 [2] BUSHING-BACKREST  
24. 7B-7525 [2] BOLT-SOCKET HEAD (7/16-14X1.25-IN)  
  8Y-6051 [2] SPACER (11.19X14.21X14.24-MM THK)  
25. 9L-7469 J [2] LOCK PIN  
26. 061-8803 B [4] SHIM (1.52-MM THK)  
27. 108-8421 Y [1] PAN GP-BACKREST (LUMBAR)  
   
    AVAILABLE REPAIR KIT(S):
  8Y-6933 J [1] KIT-TILT PAN  
  112-4577 L [1] KIT-SEAT KNOB  
  119-7141 N [1] KIT-SEAT CUSHION (CLOTH)  
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   KIT MARKED L INCLUDES PART(S) MARKED L
  M   METRIC PART
  N   KIT MARKED N INCLUDES PART(S) MARKED N
  Y   SEPARATE ILLUSTRATION
 

#SEBP25710626
 

109-8200: SEAT GP-SUSPENSION

109-8200 SEAT GP-SUSPENSION
S/N 1EW1-99999
PART OF 134-5969 CAB AR
i00812719 SEBP2571
1098200 SEAT GP-SUSPENSION Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7731 M [4] BOLT (M10X1.5X70-MM)  
2. 166-7225 [1] KIT-SLIDER BLOCK  
  4F-4879 [1] BOLT (3/8-16X0.5-IN)  
  173-5787 [4] SETSCREW (1/4-20-THD)  
3. 113-1011 Y [1] SEAT GP (CLOTH)  
4. 150-7718 YC [1] SUSPENSION GP-SEAT (AIR)  
5. 199-8904 [1] PLATE AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25710627
 

156-0549: STEERING COLUMN GP

156-0549 STEERING COLUMN GP
S/N 1EW1-99999
PART OF 153-4968 CONTROL GP-STEERING
i01227108 SEBP2571
1560549 STEERING COLUMN GP Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-8867 [1] KIT-GAS ASSIST (STEERING COLUMN)  
2. 149-2906 [1] KIT-NUT (STEERING COLUMN)  
3. 149-2907 [1] KIT-TILT LEVER (STEERING COLUMN)  
4. 156-4315 [1] KIT-SHAFT (STEERING COLUMN)  
5. 149-0774 [1] KIT-HOUSING (STEERING COLUMN)  
6. 254-1519 [1] COVER  
 

#SEBP25710628
 

127-0743: SUPPORT GP-HYDRAULIC CONTROL

127-0743 SUPPORT GP-HYDRAULIC CONTROL
S/N 1EW1-UP
PART OF 134-5969 CAB AR
i00190972 SEBP2571
1270743 SUPPORT GP-HYDRAULIC CONTROL Parts scheme 1270743 SUPPORT GP-HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9372 [4] LOCKWASHER  
2. 3B-5470 [1] SPRING  
3. 3K-4897 [1] PIN-SPRING  
4. 3T-0852 M [4] LOCKNUT (M8X1.25-THD)  
5. 4B-4278 [1] WASHER (10.2X20.5X1.6-MM THK)  
6. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
7. 4E-6331 [1] LEVER (CUSHION POSITIONING)  
8. 4E-6332 [1] SHAFT  
9. 4E-6523 [1] SUPPORT-SLIDE  
10. 4E-6526 [1] CUSHION AS (RH)  
11. 4E-6527 M [2] BOLT-PIVOT (M12X1.75X25.4-MM)  
12. 4E-8722 [6] NUT (RETAINER)  
13. 4E-9173 [2] SHAFT-CONTROL  
14. 4E-9174 [2] BEARING  
15. 156-7128 M [4] BEARING  
16. 4E-9453 [1] BAR  
17. 4E-9454 [1] LEVER  
18. 4E-9455 [1] SUPPORT  
19. 4E-9456 [1] SHAFT  
20. 4E-9457 [1] ADAPTER  
21. 4E-9757 [1] RACK  
22. 5C-2890 M [2] NUT (M6X1-THD)  
23. 5D-4822 [2] RING-RETAINING  
24. 6V-9327 M [8] SETSCREW-SOCKET (M6X1-THD)  
25. 7V-0445 [1] SPRING  
26. 7X-2031 [2] RETAINER  
27. 7X-3310 [1] KNOB-BALL  
28. 8C-7506 M [3] SCREW-MACHINE (M8X1.25X40-MM)  
29. 8P-9475 [1] COLLAR  
30. 8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
31. 8Y-5746 [1] ASHTRAY  
32. 9M-9725 [2] SPACER (0.319X0.375X0.19-MM THK)  
33. 9U-0952 [1] PIN  
34. 9U-0953 [1] GUIDE  
35. 9U-0954 [1] STUD  
36. 9U-0955 [1] PIN  
37. 9U-0958 [1] SLIDER  
38. 9U-2421 [1] SPACER  
39. 9U-2422 [1] ROD  
40. 9U-3925 [4] RING-RETAINING  
41. 9U-3926 [2] STOP  
42. 9U-3927 [1] BEARING  
43. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
44. 9X-2044 M [13] SCREW-TRUSS HEAD (M6X1X16-MM)  
45. 9X-8290 M [2] BOLT (M8X1.25X20-MM)  
46. 091-9967 [1] SPRING  
47. 095-0758 M [4] SCREW-MACHINE (M6X1X14-MM)  
48. 108-2994 [1] TRACK  
49. 157-6999 [1] SUPPORT AS  
  8T-3612 M [5] NUT-WELD (M8X1.25-THD)  
50. 126-9583 [1] STRIP  
51. 126-9594 [1] PLATE AS  
52. [1] LEVER AS (CONSOLE POSITIONING)  
53. 127-1962 [1] ROD  
54. 127-5478 [1] COVER  
55. 127-5479 [1] COVER  
56. 127-5480 [1] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
57. 137-6841 B [2] SHIM (0.2-MM THK)  
58. 128-2477 [1] SPACER (14X25X9-MM THK)  
59. 128-2478 [2] SPACER (8.5X15X9-MM THK)  
60. 5C-7261 M [4] NUT (M8X1.25-THD)  
61. 8T-4138 M [4] BOLT (M6X1X20-MM)  
62. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
63. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
65. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
66. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
67. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25710629
 

184-6177: SUPPORT GP-HYDRAULIC CONTROL

184-6177 SUPPORT GP-HYDRAULIC CONTROL
S/N 1EW1-99999
PART OF 134-5969 CAB AR
i01404801 SEBP2571
1846177 SUPPORT GP-HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your 972G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-4897 [1] PIN-SPRING  
2. 4B-4278 [1] WASHER (10.2X20.5X1.6-MM THK)  
3. 4E-6523 [1] SUPPORT-SLIDE  
4. 4E-6526 [1] CUSHION AS (RH)  
5. 4E-8722 [4] NUT (RETAINER)  
6. 4E-9173 [2] SHAFT-CONTROL  
7. 4E-9174 [2] BEARING  
8. 6V-9327 M [4] SETSCREW-SOCKET (M6X1-THD)  
9. 7V-0445 [1] SPRING  
10. 7X-3310 [1] KNOB-BALL  
11. 8Y-5746 [1] ASHTRAY  
12. 8Y-6333 [1] GASKET (ASHTRAY)  
13. 9U-0952 [1] PIN  
14. 9U-0953 [1] GUIDE  
15. 9U-0954 [1] STUD  
16. 9U-0955 [1] PIN  
17. 9U-0958 [1] SLIDER  
18. 9U-3925 [4] RING-RETAINING  
19. 9U-3926 [2] STOP  
20. 9U-3927 [1] BEARING  
21. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
22. 9W-1991 [1] SPACER (10.7X17.1X40-MM THK)  
23. 127-0323 [1] LEVER AS  
24. 127-5480 [1] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
25. 137-6841 B [2] SHIM (0.2-MM THK)  
26. 170-0489 [1] HOUSING  
27. 170-0976 [1] BRACKET AS  
28. 170-7473 [2] KNOB AS  
29. 176-0822 [1] BRACKET AS  
30. 184-6462 [1] HOUSING  
31. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
32. 5C-7261 M [4] NUT (M8X1.25-THD)  
33. 7C-4354 [1] CLIP  
34. 7X-0575 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
35. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
36. 8T-4138 M [4] BOLT (M6X1X20-MM)  
37. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
38. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
39. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
40. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
41. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
42. 9X-2038 [8] WASHER (7X19X2-MM THK)  
43. 9X-2044 M [8] SCREW-TRUSS HEAD (M6X1X16-MM)  
44. 9X-2616 M [2] SCREW-SOCKET (M8X1.25X16-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Special Instruction
Improving the Environment of the Operator{7301}
Improving the Environment of the Operator{7301}
Service Magazine
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02

Caterpillar Parts SIS Catalog 972G :

ROPS GP-ENCLOSED
134-5204 ROPS GP-ENCLOSED
PEDAL GP-GOVERNOR
111-0844 PEDAL GP-GOVERNOR
PEDAL GP-BRAKE
188-7497 PEDAL GP-BRAKE
PEDAL GP-BRAKE
188-7496 PEDAL GP-BRAKE
PEDAL GP-BRAKE
187-2054 PEDAL GP-BRAKE
PEDAL GP-BRAKE
186-0157 PEDAL GP-BRAKE
186-0156 PEDAL GP-BRAKE
PEDAL GP-BRAKE
180-3996 PEDAL GP-BRAKE
SEAT BELT GP
122-4617 SEAT BELT GP
SEAT BELT GP
156-1148 SEAT BELT GP
SEAT GP
113-1011 SEAT GP
SEAT GP
113-1011 SEAT GP
SEAT GP
130-8966 SEAT GP
SEAT GP-SUSPENSION
109-8200 SEAT GP-SUSPENSION
STEERING COLUMN GP
156-0549 STEERING COLUMN GP
SUPPORT GP-HYDRAULIC CONTROL
127-0743 SUPPORT GP-HYDRAULIC CONTROL

Truck sale:

Caterpillar 972G
 
Caterpillar 972G
- bucket
FINNING CANADA
Caterpillar 972G, Construction
71,000 
Caterpillar 972G, Construction
- Wheel Loaders
BUTLER MACHINERY COMPANY
Caterpillar 972G, Construction
53,385 
Caterpillar 972G, Construction
- Wheel Loaders
WILLIAM ADAMS PTY. LTD.
Australia
 
55,000 
Caterpillar 972G, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 972G, Construction
49,000 
Caterpillar 972G, Construction
- Wheel Loaders
QUINN COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.