AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

134-9644 WIRING GP-ENGINE S/N 7BS1-UP PART OF 138-3204 CHASSIS AR Type 1 IT38G INTEGRATED TOOLCARRIER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

INTEGRATED TOOLCARRIER IT38G INTEGRATED TOOLCARRIER 7BS
 IT38G Integrated Toolcarrier 7BS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2572 IT38G 7BS   (1997)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
134-4099 WIRING GP-CAB
WIRING GP-ELECTRIC CLUTCH
168-9087 WIRING GP-ELECTRIC CLUTCH
WIRING GP-ENGINE
134-9644 WIRING GP-ENGINE
WIRING GP-ENGINE
134-9644 WIRING GP-ENGINE
WIRING GP-ENGINE
142-0810 WIRING GP-ENGINE
WIRING GP-ENGINE
142-0810 WIRING GP-ENGINE
 

#SEBP25720270
 

134-9644: WIRING GP-ENGINE

134-9644 WIRING GP-ENGINE
S/N 7BS1-UP
PART OF 138-3204 CHASSIS AR
Type 1
i00511752 SEBP2572
1349644 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 3V-0778 [1] BRACKET  
3. 3Y-2888 [1] CONNECTOR  
4. 6V-2455 [1] SENSOR GP-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14CM)  
5. 7W-1238 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
6. 9R-5675 [1] SPACER (9X13.72X46-MM THK)  
7. 104-3007 [1] SENDER AS-TEMPERATURE (TORQUE CONVERTER OIL)  
8. 104-3008 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
9. 118-5144 [1] SENDER AS-TEMPERATURE (ENGINE)  
    (EACH SENDER AS INCLUDES)
  102-8802 KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 9U-2277 [2] CLIP AS  
11. 135-4704 [1] HARNESS AS-ENGINE  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [5] STRAP-CABLE  
  3T-3044 [1] PLUG AS-CONNECTOR (25-PIN)  
  7G-7917 [2] PLUG-SEAL  
  7G-7918 [4] PLUG-SEAL  
  7G-7919 [2] PLUG-SEAL  
  8N-1521 [1] BELL AS-END  
  8T-8737 [8] PLUG-SEAL  
12. 139-0204 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 147-3793 [1] HARNESS AS-TRANSMISSION  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  7G-7917 [3] PLUG-SEAL  
  7K-1181 [1] STRAP-CABLE  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  8N-1535 [1] BELL AS-END  
14. 3J-1907 [1] SEAL-O-RING  
15. 3K-0360 [3] SEAL-O-RING  
16. 4D-7794 [1] CLIP  
17. 4K-8864 [3] CLIP (LOOP)  
18. 4P-7581 [1] CLIP (LADDER)  
19. 4P-8134 [1] CLIP (LADDER)  
20. 4S-1962 [3] CLIP (LOOP)  
21. 8M-2770 [1] CLIP (LOOP)  
22. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4133 M [1] NUT (M10X1.5-THD)  
24. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
25. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
26. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
27. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
28. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
29. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
30. 9M-8406 [5] CLIP (LOOP)  
31. 9X-7345 [1] GROMMET  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP25720271
 

134-9644: WIRING GP-ENGINE

134-9644 WIRING GP-ENGINE
S/N 7BS1-UP
PART OF 138-3204 CHASSIS AR
Type 2
i01110268 SEBP2572
1349644 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 3V-0778 [1] BRACKET  
3. 3Y-2888 [1] CONNECTOR  
4. 6V-2455 [1] SENSOR GP-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14CM)  
5. 7W-1238 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
6. 9R-5675 [1] SPACER (9X13.72X46-MM THK)  
7. 104-3007 [1] SENDER AS-TEMPERATURE (TORQUE CONVERTER OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 104-3008 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 118-5144 [1] SENDER AS-TEMPERATURE (ENGINE)  
  102-8802 KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 9U-2277 [2] CLIP AS  
11. 171-4406 C [1] HARNESS AS-ENGINE  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [6] STRAP-CABLE  
  3T-3044 [1] PLUG AS-CONNECTOR (25-PIN)  
  7G-7918 [4] PLUG-SEAL  
  7G-7919 [2] PLUG-SEAL  
  8N-1521 [1] BELL AS-END  
  8T-8737 [10] PLUG-SEAL  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
12. 139-0204 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 147-3793 [1] HARNESS AS-TRANSMISSION  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  8N-1535 [1] BELL AS-END  
14. 3J-1907 [1] SEAL-O-RING  
15. 3K-0360 [3] SEAL-O-RING  
16. 4D-7794 [1] CLIP  
17. 4K-8864 [3] CLIP (LOOP)  
18. 4P-7581 [1] CLIP (LADDER)  
19. 4P-8134 [1] CLIP (LADDER)  
20. 4S-1962 [3] CLIP (LOOP)  
21. 8M-2770 [1] CLIP (LOOP)  
22. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4133 M [1] NUT (M10X1.5-THD)  
24. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
25. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
26. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
27. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
28. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
29. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
30. 9M-8406 [1] CLIP (LOOP)  
31. 9X-7345 [1] GROMMET  
32. 6D-4246 [4] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP25720272
 

142-0810: WIRING GP-ENGINE

142-0810 WIRING GP-ENGINE
S/N 7BS1-679
PART OF 141-8606 ALTERNATOR AR-CHARGING
FOR USE WITH 70 AMP ALTERNATOR
AN ATTACHMENT
i00503348 SEBP2572
1420810 WIRING GP-ENGINE Parts scheme 1420810 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 9X-7345 [1] GROMMET  
3. 3Y-2888 [1] CONNECTOR  
4. 6V-2455 [1] SENSOR GP-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [4] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE  
5. 7W-1238 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
6. 9R-5675 [1] SPACER (9X13.72X46-MM THK)  
7. 104-3007 [1] SENDER AS-TEMPERATURE (TORQUE CONVERTER OIL)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [4] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 104-3008 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [4] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 118-5144 [1] SENDER AS-TEMPERATURE (ENGINE)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [4] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 9U-2277 [2] CLIP AS  
11. 9M-8406 [5] CLIP (LOOP)  
12. 141-9814 [1] HARNESS AS-ENGINE  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [5] STRAP-CABLE  
  3T-3044 [1] PLUG AS-CONNECTOR (25-PIN)  
  7G-7917 [2] PLUG-SEAL  
  7G-7918 [4] PLUG-SEAL  
  7G-7919 [2] PLUG-SEAL  
  8N-1521 [1] BELL AS-END  
  8T-8737 [8] PLUG-SEAL  
13. 147-3793 [1] HARNESS AS-TRANSMISSION  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  7G-7917 [3] PLUG-SEAL  
  7K-1181 [1] STRAP-CABLE  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  8N-1535 [1] BELL AS-END  
14. 3J-1907 [1] SEAL-O-RING  
15. 3K-0360 [3] SEAL-O-RING  
16. 4D-7794 [1] CLIP  
17. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
18. 4K-8864 [3] CLIP (LOOP)  
19. 4P-7581 [2] CLIP (LADDER)  
20. 4P-8134 [3] CLIP (LADDER)  
21. 4S-1962 [3] CLIP (LOOP)  
22. 8M-2770 [2] CLIP (LOOP)  
23. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
26. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
27. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
28. 3V-0778 [1] BRACKET  
29. 139-0204 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
30. 4K-8302 [1] CLIP (LOOP)  
31. 8T-4133 M [1] NUT (M10X1.5-THD)  
32. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP25720273
 

142-0810: WIRING GP-ENGINE

142-0810 WIRING GP-ENGINE
S/N 7BS680-UP
PART OF 141-8606 ALTERNATOR AR-CHARGING
FOR USE WITH 70 AMP ALTERNATOR
AN ATTACHMENT
i01110291 SEBP2572
1420810 WIRING GP-ENGINE Parts scheme 1420810 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 3V-0778 [1] BRACKET  
3. 3Y-2888 [1] CONNECTOR  
4. 6V-2455 [1] SENSOR GP-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE  
5. 7W-1238 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
6. 9R-5675 [1] SPACER (9X13.72X46-MM THK)  
7. 9U-2277 [2] CLIP AS  
8. 104-3007 [1] SENDER AS-TEMPERATURE (TORQUE CONVERTER OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 104-3008 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 118-5144 [1] SENDER AS-TEMPERATURE (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 139-0204 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
12. 147-3793 [1] HARNESS AS-TRANSMISSION  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
13. 171-4407 [1] HARNESS AS-ENGINE  
  3T-3044 [1] PLUG AS-CONNECTOR (25-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
14. 3J-1907 [1] SEAL-O-RING  
15. 3K-0360 [3] SEAL-O-RING  
16. 4D-7794 [1] CLIP  
17. 4K-8302 [1] CLIP (LOOP)  
18. 4K-8864 [3] CLIP (LOOP)  
19. 4P-7581 [2] CLIP (LADDER)  
20. 4P-8134 [3] CLIP (LADDER)  
21. 4S-1962 [3] CLIP (LOOP)  
22. 8M-2770 [1] CLIP (LOOP)  
23. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4133 M [1] NUT (M10X1.5-THD)  
25. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
26. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
27. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
28. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
29. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
31. 9M-8406 [5] CLIP (LOOP)  
32. 9X-7345 [1] GROMMET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP25720274
 

138-3206: WIRING GP-FRONT

138-3206 WIRING GP-FRONT
S/N 7BS1-UP
PART OF 138-3204 CHASSIS AR
i00583824 SEBP2572
1383206 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-9891 Y [1] HARNESS AS-FRONT  
2. 112-2960 [1] HARNESS AS-LIGHTING (LH)  
  8T-8737 [5] PLUG-SEAL  
  102-8807 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
3. 112-3638 [1] HARNESS AS-LIGHTING (RH)  
  102-8807 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [5] PLUG-SEAL  
4. 7T-0970 [1] HORN AS (24-VOLT, HIGH TONE)  
  8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  9B-7233 [2] LOCKWASHER  
5. 5P-7468 [2] CLIP (SLOT)  
6. 5P-7469 [2] CLIP (TAB)  
7. 6D-4246 [1] CLIP (LOOP)  
8. 5P-8444 [2] GROMMET (37-MM ID)  
9. 4P-8134 [2] CLIP (LADDER)  
10. 2T-3019 [2] CLIP (LOOP)  
11. 116-0118 [1] CLIP  
12. 6V-2383 [1] CLIP  
13. 6D-4244 [3] CLIP (LOOP)  
14. 3S-2093 [7] STRAP-CABLE  
15. 7K-1181 [14] STRAP-CABLE  
16. 126-6435 [1] BRACKET  
17. 124-0178 [1] PLATE  
18. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4223 [9] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4133 M [1] NUT (M10X1.5-THD)  
21. 8T-4244 M [5] NUT (M12X1.75-THD)  
22. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
23. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
24. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
25. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
26. 9K-0700 [2] GROMMET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25720275
 

135-4552: WIRING GP-MACHINE

135-4552 WIRING GP-MACHINE
S/N 7BS1-UP
PART OF 138-3204 CHASSIS AR
i00585384 SEBP2572
1354552 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-0240 [1] SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)(6-32X.25IN)  
  102-8803 KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  112-4550 BE SLEEVE  
2. 7K-1181 C [31] STRAP-CABLE  
3. 106-3887 [1] GROMMET  
4. 8T-4244 M [1] NUT (M12X1.75-THD)  
5. 147-6979 C [1] HARNESS AS-CHASSIS  
  3T-3043 [1] RECEPTACLE AS-CONNECTOR (25-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  7G-7917 [7] PLUG-SEAL  
  7G-7918 [8] PLUG-SEAL  
  7G-7919 [4] PLUG-SEAL  
  8T-8737 PLUG-SEAL  
  7G-7920 [1] PLUG-SEAL  
  7K-1181 [3] STRAP-CABLE  
  3S-2093 [4] STRAP-CABLE  
  8N-1535 [6] BELL AS-END  
  8N-1521 [2] BELL AS-END  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  8N-1518 [1] PLUG AS-CONNECTOR (25-PIN)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  102-8807 [5] KIT-CONNECTING PLUG (2-PIN)  
  102-8808 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE)
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 148-6471 C [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
7. 137-6838 Y [1] WIRING GP-RELAY PANEL  
8. 139-8489 [1] BRACKET AS  
9. 4S-4455 C [1] CLIP  
10. 2M-3433 C [2] GROMMET  
11. 5P-9297 [1] CLIP (LOOP)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25720276
 

135-4552: WIRING GP-MACHINE

135-4552 WIRING GP-MACHINE
S/N 7BS1-1134
PART OF 138-3204 CHASSIS AR
i01110295 SEBP2572
1354552 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-0240 [1] SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)(6-32X.25IN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
2. 7K-1181 [28] STRAP-CABLE  
3. 106-3887 [1] GROMMET  
4. 8T-4244 M [1] NUT (M12X1.75-THD)  
5. 171-4405 C [1] HARNESS AS-CHASSIS  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  8N-1518 [1] PLUG AS-CONNECTOR (25-PIN)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  3T-3043 [1] RECEPTACLE AS-CONNECTOR (25-PIN)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  8N-1521 [2] BELL AS-END  
  8N-1535 [1] BELL AS-END  
  3S-2093 [5] STRAP-CABLE  
  7K-1181 [3] STRAP-CABLE  
6. 148-6471 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
7. 137-6838 Y [1] WIRING GP-RELAY PANEL  
8. 139-8489 [1] BRACKET AS  
9. 4S-4455 [1] CLIP  
10. 2M-3433 [2] GROMMET  
11. 5P-9297 [1] CLIP (LOOP)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 188-6252 [1] FILM-INSTRUCTION (HOOD TILT)  
18. 5F-9757 [1] GROMMET  
19. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
20. 130-5300 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25720277
 

135-4552: WIRING GP-MACHINE

135-4552 WIRING GP-MACHINE
S/N 7BS1135-UP
PART OF 138-3204 CHASSIS AR
i01684634 SEBP2572
1354552 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-0240 [1] SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)(6-32X.25IN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
2. 7K-1181 [28] STRAP-CABLE  
3. 106-3887 [1] GROMMET  
4. 8T-4244 M [1] NUT (M12X1.75-THD)  
5. 214-6405 C [1] HARNESS AS-CHASSIS  
  3E-3369 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  8N-1518 [1] PLUG AS-CONNECTOR (25-PIN)  
  8N-1529 [1] PLUG AS-CONNECTOR (14-PIN)  
  129-7164 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  3T-3043 [1] RECEPTACLE AS-CONNECTOR (25-PIN)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  8N-1521 [2] BELL AS-END  
  8N-1535 [1] BELL AS-END  
6. 148-6471 [1] PLATE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
7. 137-6838 Y [1] WIRING GP-RELAY PANEL  
8. 139-8489 [1] BRACKET AS  
9. 4S-4455 [1] CLIP  
10. 2M-3433 [2] GROMMET  
11. 5P-9297 [1] CLIP (LOOP)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 188-6252 [1] FILM-INSTRUCTION (HOOD TILT)  
18. 5F-9757 [1] GROMMET  
19. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
20. 130-5300 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25720278
 

134-4100: WIRING GP-OPEN ROPS

134-4100 WIRING GP-OPEN ROPS
S/N 7BS1-926
PART OF 135-0511 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i00509357 SEBP2572
1344100 WIRING GP-OPEN ROPS Parts scheme 1344100 WIRING GP-OPEN ROPS Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4393 [5] LOCKWASHER  
2. 3E-6329 BY [1] ALARM GP (ACTION)  
3. 7K-1181 [16] STRAP-CABLE  
4. 8T-8737 [26] PLUG-SEAL (3.07MM ODX14.6MM OAL)  
5. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
6. 107-6065 B [1] SWITCH GP-LAMP TEST  
7. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING/FLOOD/PANEL/TAIL LIGHT)  
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 109-2356 B [3] PLUG (SWITCH)  
9. 110-6109 [1] KNOB-CONTROL  
10. 111-0155 [1] PLATE AS (LH)  
11. 111-0156 [1] PLATE AS (RH)  
12. 111-0161 [5] HOUSING  
13. 111-7873 [1] HARNESS AS-CAB  
14. 111-7899 B [3] GASKET  
15. 112-4735 [1] CONTROL GP-DIODE BLOCK  
16. 114-3947 [5] PLATE  
17. 115-1748 [10] LAMP (24-VOLT, 3-WATT)  
18. 118-7238 [1] SWITCH AS-NEUTRALIZER (XMSN OVERRIDE CONTROL)  
19. 118-7241 [1] FILM-INSTRUCTION (DASH, RH)(RH DUCT)  
20. 135-2603 [1] FILM-PANEL (LH DUCT)  
21. 173-9190 [1] HARNESS AS-PANEL (SWITCH PANELS, RH, LH)  
22. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
23. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
24. 102-8806 [2] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
25. 4P-7581 [1] CLIP (LADDER)  
26. 4P-8134 [3] CLIP (LADDER)(TIE WRAP)  
27. 5C-8312 M [5] NUT (M4X0.7-THD)  
28. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25720279
 

134-4100: WIRING GP-OPEN ROPS

134-4100 WIRING GP-OPEN ROPS
S/N 7BS927-UP
PART OF 135-0511 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i01506440 SEBP2572
1344100 WIRING GP-OPEN ROPS Parts scheme 1344100 WIRING GP-OPEN ROPS Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [15] STRAP-CABLE  
2. 8T-8737 C [26] PLUG-SEAL  
3. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
4. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)  
    (RUNNING/FLOOD/PANEL/TAIL LIGHTS)
5. 109-2356 BC [4] PLUG  
6. 110-6109 [1] KNOB-CONTROL  
7. 111-7899 BC [4] GASKET  
8. 115-1748 [2] LAMP (24-VOLT, 3-WATT)  
9. 118-7238 [1] SWITCH AS-NEUTRALIZER (XMSN OVERRIDE CONTROL)  
  111-7899 [1] GASKET  
10. 148-0642 CY [1] MODULE GP-WARNING INDICATOR (WITHOUT ALARM)  
11. 156-7183 C [1] PLATE AS (LH)  
12. 156-7184 C [1] PLATE AS (RH)  
13. 157-1997 C [4] SPACER (4.34X15.88X6.34-MM THK)  
14. 172-2309 C [1] HARNESS AS-CAB  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [9] PLUG-SEAL  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS & WEDGE)
15. 198-5177 C [1] FILM-PANEL (DUCT, LH)  
16. 200-1889 C [1] HARNESS AS-PANEL (SWITCH PANELS, RH, LH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [13] PLUG-SEAL  
  5P-6271 [1] CONNECTOR AS  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2265 [5] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
17. 201-2674 C [1] FILM-PANEL  
18. 202-9749 CY [1] MODULE GP-WARNING INDICATOR  
19. 1P-7326 C [4] WASHER (4.32X9.52X1.52-MM THK)  
20. 102-8804 C [1] KIT-RECEPTACLE (4-PIN)  
21. 102-8805 C [1] KIT-RECEPTACLE (6-PIN)  
22. 102-8806 C [2] KIT-RECEPTACLE (8-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
23. 4P-7581 [1] CLIP (LADDER)  
24. 4P-8134 [2] CLIP (LADDER)  
25. 8T-2659 CM [4] LOCKNUT (M4X0.7-THD)  
26. 8T-4121 C [1] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 CM [1] NUT (M10X1.5-THD)  
28. 8T-4199 M [3] BOLT (M8X1.25X12-MM)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-1046 M [8] SCREW (M4X0.7X18-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3114, 3116, and 3126 Engines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog IT38G :

WIRING GP-ELECTRIC CLUTCH
168-9087 WIRING GP-ELECTRIC CLUTCH
WIRING GP-CAB
134-4099 WIRING GP-CAB
WIRING GP-CAB
134-4099 WIRING GP-CAB
WARNING GP-BACKUP
136-1116 WARNING GP-BACKUP
SWITCH GP-WIPER
275-7741 SWITCH GP-WIPER
SWITCH GP-SECONDARY STEERING
143-2477 SWITCH GP-SECONDARY STEERING
SWITCH GP-MAGNETIC
254-3783 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
241-8368 SWITCH GP-MAGNETIC
WIRING GP-ENGINE
134-9644 WIRING GP-ENGINE
WIRING GP-ENGINE
142-0810 WIRING GP-ENGINE
WIRING GP-ENGINE
142-0810 WIRING GP-ENGINE
WIRING GP-FRONT
138-3206 WIRING GP-FRONT
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-MACHINE
135-4552 WIRING GP-MACHINE
WIRING GP-OPEN ROPS
134-4100 WIRING GP-OPEN ROPS

Truck sale:

Caterpillar IT38G
 
Caterpillar IT38G
- Wheel Loaders
ZIEGLER CAT
 
 
Caterpillar IT38G II, Misc Forklifts, Material handling equipment


 
30.773 
Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung


 
63.000 
Caterpillar IT38G II 3, Radlader, Bau-Und Bergbauausrüstung


Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung
 
Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.