AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

265-8040 COVER GP-VALVE MECHANISM S/N 24Z4366-UP AN ATTACHMENT 3512 GEN SET ENGINE


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

GEN SET ENGINE 3512 GEN SET ENGINE 24Z
 3512 Generator Set Engine 24Z04366-UP SEBP2573 3512 24Z   (1981)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
155-2565 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
155-2566 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
265-8040 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
FASTENER GP-VALVE MECHANISM
1W-8109 FASTENER GP-VALVE MECHANISM
VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
 

#SEBP25730040
 

265-8040: COVER GP-VALVE MECHANISM

265-8040 COVER GP-VALVE MECHANISM
S/N 24Z4366-UP
AN ATTACHMENT
i02304356 SEBP2573
2658040 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 265-8041 [1] COVER  
2. 272-0757 [1] SEAL-VALVE COVER (VALVE COVER BASE)  
3. 1A-9579 [4] BOLT (5/16-18X1.5-IN)  
4. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP25730041
 

7N-1855: COVER GP-VALVE MECHANISM

7N-1855 COVER GP-VALVE MECHANISM
S/N 24Z4366-UP
i00091710 SEBP2573
7N1855 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-8894 C [1] COVER  
2. 272-0757 C [1] SEAL-VALVE COVER  
3. 1A-9579 [4] BOLT (5/16-18X1.5-IN)  
4. 9M-1974 C [4] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25730042
 

8N-7103: CRANKSHAFT GP

8N-7103 CRANKSHAFT GP
S/N 24Z4366-9615
i00092873 SEBP2573
8N7103 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-6786 C [1] CRANKSHAFT AS  
  7N-2003 [24] DOWEL  
2. 128-4845 [36] BOLT AS  
3. 2W-2288 [6] PLUG  
4. 105-0253 [7] BEARING-MAIN (STANDARD)  
  105-0254 AB BEARING-MAIN (0.63-MM US)  
  105-0255 AB BEARING-MAIN (1.27-MM US)  
  105-0256 AB BEARING-MAIN (0.63-MM OS)  
  105-0257 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
5. 7C-6209 [2] PLATE-THRUST  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25730043
 

8N-7103: CRANKSHAFT GP

8N-7103 CRANKSHAFT GP
S/N 24Z9616-UP
i01339955 SEBP2573
8N7103 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-6786 [1] CRANKSHAFT AS  
  7N-2003 [24] DOWEL  
2. 128-4845 [36] BOLT AS  
3. 2W-2288 [6] PLUG  
4. 149-6031 CJ [7] BEARING AS-MAIN (STANDARD)  
  149-6032 ABC BEARING-MAIN (0.63-MM US)  
  149-6033 ABC BEARING-MAIN (1.27-MM US)  
  149-6034 ABC BEARING-MAIN (0.63-MM OS)  
  149-6035 ABC BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
5. 7C-6209 J [2] PLATE-THRUST  
   
    AVAILABLE REPAIR KIT(S):
  196-9530 J KIT-BASIC ENGINE REPAIR (MAIN BEARING)  
    (INCLUDES THRUST PLATES & MAIN BEARINGS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25730044
 

100-8026: CYLINDER BLOCK AS

100-8026 CYLINDER BLOCK AS
S/N 24Z6027-10300
PART OF 115-3504, 115-3505, 240-6650 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@115-5154@@@@@
i00092980 SEBP2573
1008026 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 223-1696 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [3] PLUG  
6. 8T-2929 [3] SEAL-O-RING  
7. 8T-2928 [3] SEAL-O-RING  
8. 211-7826 [12] LINER-CYLINDER BLOCK  
9. 7N-2046 [36] SEAL-O-RING  
10. 8N-4707 [12] BAND-FILLER  
 

#SEBP25730045
 

101-1227: CYLINDER BLOCK AS

101-1227 CYLINDER BLOCK AS
S/N 24Z4366-6026
PART OF 2W-2944 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@101-1244@@@@@
i00092981 SEBP2573
1011227 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 9Y-9175 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [2] PLUG  
6. 8T-2929 [2] SEAL-O-RING  
7. 8T-2928 [2] SEAL-O-RING  
8. 110-6993 [12] LINER-CYLINDER BLOCK  
9. 7N-2046 [36] SEAL-O-RING  
10. 8N-4707 [12] BAND-FILLER  
 

#SEBP25730046
 

101-1241: CYLINDER BLOCK AS

101-1241 CYLINDER BLOCK AS
S/N 24Z4366-6026
PART OF 101-1244 CYLINDER BLOCK GP
i00092982 SEBP2573
1011241 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 9Y-9175 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [2] PLUG  
6. 8T-2929 [2] SEAL-O-RING  
7. 8T-2928 [2] SEAL-O-RING  
 

#SEBP25730047
 

106-2779: CYLINDER BLOCK AS

106-2779 CYLINDER BLOCK AS
S/N 24Z6027-UP
PART OF 115-5154 CYLINDER BLOCK GP
i02478951 SEBP2573
1062779 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 223-1696 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [3] PLUG  
6. 8T-2928 [3] SEAL-O-RING  
7. 8T-2929 [3] SEAL-O-RING  
 

#SEBP25730048
 

350-1392: CYLINDER BLOCK AS

350-1392 CYLINDER BLOCK AS
S/N 24Z10301-UP
PART OF 353-3970 CYLINDER BLOCK GP
i03810951 SEBP2573
3501392 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 223-1696 [7] CAP-CRANKSHAFT BEARING  
2. 8T-2929 [3] SEAL-O-RING  
3. 4W-4813 [3] PLUG  
4. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
5. 7X-7925 [28] BOLT (7/8-14X11-IN)  
6. 8T-2928 [3] SEAL-O-RING  
 

#SEBP25730049
 

350-1413: CYLINDER BLOCK AS

350-1413 CYLINDER BLOCK AS
S/N 24Z10301-UP
PART OF 240-6650 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@353-3970@@@@@, 36- 7N-2046 SEAL-O-RING, 12-211-7826 LINER-CYLINDER BLOCK, 12-352-6061 SEAL-LINER
i03831410 SEBP2573
3501413 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-6061 [12] SEAL-LINER  
2. 5P-8249 [28] WASHER-HARD (24X41.5X4-MM THK)  
3. 7X-7925 [28] BOLT (7/8-14X11-IN)  
4. 223-1696 [7] CAP-CRANKSHAFT BEARING  
5. 4W-4813 [3] PLUG  
6. 8T-2929 [3] SEAL-O-RING  
7. 8T-2928 [3] SEAL-O-RING  
8. 211-7826 [12] LINER-CYLINDER BLOCK  
9. 7N-2046 [36] SEAL-O-RING  
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Changes To Valve Clearance Settings
1983/04/27
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Check Cylinder Heads For Water Passage Plugs
1984/04/11
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Valve Mechanism Groups Use New Lifter Assemblies
1985/08/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Stronger Cylinder Heads Used
1986/02/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Material Changed In Exhaust and Inlet Valves
1987/05/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, and New Cylinder Head Assemblies Groups With New Inlet Valve Seats
1990/03/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
New Cylinder Head Gasket Used
1993/09/01
Non-Counterbored Valve Guides Used{1104}
1994/03/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Exhaust Valve With Tapered Stem Used In Engine Cylinder Head Groups{1105}
1995/09/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Addition to Specifications "Valve Mechanism" {1123}
2005/02/28
New Cover Seals are Available {1107, 1201, 1210}
2007/03/26
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/08/01
New Rocker Arm Improves Lubrication {1123}
2003/09/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
2003/12/01
An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
2005/05/23
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3500 Industrial and Generator Set Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installation Of Service Cylinder Head Assembly{1101}
Installation Of Service Cylinder Head Assembly{1101}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Specifications
Valve Rocker Arms, Lifters, And Bridges
SUPPLEMENT FOR UPRATED 3500 ENGINES
Valve Mechanism
3500 Generator Set Engines
Valve Mechanism
3500 Generator Set Engines
Fuel Injector Mechanism
3500 Generator Set Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
3500 Engines
Valve Lash and Valve Bridge Adjustment
3500 Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Engines
Valve Lash Check
3500 Engines
Disassembly and Assembly
Valve Cover - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft and Push Rods - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft - Disassemble
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft - Assemble
3508, 3512 and 3516 Generator Set Engines
Valve Cover Base - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal {1107}
1985/01/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Mechanism Groups Use New Lifter Assemblies{1209}
1985/08/05
Stronger Push Rod Used{1208}
1985/08/05
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Stronger Cylinder Heads Used{1100}
1986/01/27
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Correct Identification Of Rocker Arm Assembly Components{1123}
1992/11/09
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3512 :

COVER GP-VALVE MECHANISM
155-2566 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
155-2565 COVER GP-VALVE MECHANISM
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
7W-2378 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
263-8944 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
8N-7103 CRANKSHAFT GP
CRANKSHAFT GP
8N-7103 CRANKSHAFT GP
CYLINDER BLOCK AS
100-8026 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1227 CYLINDER BLOCK AS
CYLINDER BLOCK AS
101-1241 CYLINDER BLOCK AS
CYLINDER BLOCK AS
106-2779 CYLINDER BLOCK AS
CYLINDER BLOCK AS
350-1392 CYLINDER BLOCK AS

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.