AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

139-5657 COOLER GP-FUEL S/N 24Z4366-UP AN ATTACHMENT 3512 GEN SET ENGINE


FUEL SYSTEM
LINES GP-FUEL
GOVERNOR GP
DRIVE GP-TACHOMETER

GEN SET ENGINE 3512 GEN SET ENGINE 24Z
 3512 Generator Set Engine 24Z04366-UP SEBP2573 3512 24Z   (1981)

FUEL SYSTEM

LINES GP-FUEL
139-5657 COOLER GP-FUEL
COOLER GP-FUEL
6I-3139 COOLER GP-FUEL
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
COOLER GP-FUEL
7E-6681 COOLER GP-FUEL
 

#SEBP25730680
 

139-5657: COOLER GP-FUEL

139-5657 COOLER GP-FUEL
S/N 24Z4366-UP
AN ATTACHMENT
i02419457 SEBP2573
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  281-7389 [10] PLATE GP-HEAT EXCHANGER  
  281-7390 [11] SEAL GP-FUEL COOLER  
 

#SEBP25730681
 

6I-3139: COOLER GP-FUEL

6I-3139 COOLER GP-FUEL
S/N 24Z4366-UP
PART OF 7C-6206 RADIATOR GP
FOR USE WITH 35-CV RADIATOR
AN ATTACHMENT
i00395761 SEBP2573
6I3139 COOLER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6633 [1] COOLER-FUEL  
2. 6I-3138 [2] SUPPORT AS-COOLER  
3. 8N-1186 I [1] HOSE AS  
4. 3N-4906 I [1] HOSE AS  
5. 2H-3939 [1] ELBOW  
6. 2L-8228 [1] ELBOW  
7. 8C-3121 [2] BOLT (5/16-18X1.5-IN)  
8. 6P-0699 [2] GROMMET  
9. 6V-8189 [4] NUT (5/16-18-THD)  
10. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
11. 5P-2955 [2] BOLT (5/16-18X2.5-IN)  
12. 7X-2501 [4] BOLT (1/4-20X1.25-IN)  
13. 7E-6745 [4] HANGER  
14. 6V-8185 [8] NUT (1/4-20-THD)  
16. 4B-1256 [4] SCREW-MACHINE (1/4-20X0.75-IN)  
17. 6B-9081 [2] BUSHING-REDUCER  
18. 034-1432 B [3] STRAP-CABLE  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25730682
 

7E-6634: COOLER GP-FUEL

7E-6634 COOLER GP-FUEL
S/N 24Z4366-UP
FOR USE WITH 72-25 RADIATOR
AN ATTACHMENT
i00386613 SEBP2573
7E6634 COOLER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6633 [1] COOLER-FUEL  
2. 7E-6685 [2] SUPPORT AS  
3. 8N-1186 I [1] HOSE AS  
4. 3N-4906 I [1] HOSE AS  
5. 2H-3939 [1] ELBOW  
6. 2L-8228 [1] ELBOW  
8. 6P-0699 [2] GROMMET  
9. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
10. 6V-8801 [4] NUT (3/8-16-THD)  
11. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 4P-1701 C [1] KIT-COOLER MOUNTING (FUEL)  
16. 6B-9081 [2] BUSHING-REDUCER  
17. 034-1432 B [3] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25730683
 

7E-6681: COOLER GP-FUEL

7E-6681 COOLER GP-FUEL
S/N 24Z4366-UP
PART OF 143-5216 PARTS GP-MISCELLANEOUS, 9Y-6675 RADIATOR GP
FOR USE WITH 46-CV RADIATOR
AN ATTACHMENT
i00386637 SEBP2573
7E6681 COOLER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6633 [1] COOLER-FUEL  
2. 7E-6683 [2] SUPPORT AS  
3. 8N-1186 I [1] HOSE AS  
4. 3N-4906 I [1] HOSE AS  
5. 2H-3939 [1] ELBOW  
6. 2L-8228 [1] ELBOW  
8. 1S-1014 [2] GROMMET  
9. 8C-3121 [2] BOLT (5/16-18X1.5-IN)  
10. 6V-8189 [4] NUT (5/16-18-THD)  
11. 8T-4224 B [12] WASHER-HARD (8.8X16X2-MM THK)  
12. 4P-1701 [1] KIT-COOLER MOUNTING (FUEL)  
13. 5P-2955 [2] BOLT (5/16-18X2.5-IN)  
17. 6B-9081 [2] BUSHING-REDUCER  
18. 034-1432 B [3] STRAP-CABLE  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25730684
 

7E-6682: COOLER GP-FUEL

7E-6682 COOLER GP-FUEL
S/N 24Z4366-UP
FOR USE WITH 60-13 RADIATOR
AN ATTACHMENT
i00386649 SEBP2573
7E6682 COOLER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6633 [1] COOLER-FUEL  
2. 7E-6684 [2] SUPPORT AS  
3. 8N-1186 I [1] HOSE AS  
4. 3N-4906 I [1] HOSE AS  
5. 2H-3939 [1] ELBOW  
6. 2L-8228 [1] ELBOW  
8. 6P-0699 [2] GROMMET  
9. 4M-6425 [4] BOLT (5/16-18X1-IN)  
10. 6V-8189 [4] NUT (5/16-18-THD)  
11. 8T-4224 B [12] WASHER-HARD (8.8X16X2-MM THK)  
12. 4P-1701 C [1] KIT-COOLER MOUNTING (FUEL)  
13. 6B-9081 [2] BUSHING-REDUCER  
14. 034-1432 B [3] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25730685
 

7E-8090: COOLER GP-FUEL

7E-8090 COOLER GP-FUEL
S/N 24Z4366-UP
FOR USE WITH 50-11 RADIATOR
AN ATTACHMENT
i00388690 SEBP2573
7E8090 COOLER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 006-5707 [1] ELBOW-PIPE  
2. 9M-1974 B [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 2H-3939 [1] ELBOW  
4. 7E-8825 I [1] HOSE AS  
5. 6B-9081 [2] BUSHING-REDUCER  
6. 3N-7223 I [1] HOSE AS  
7. 5P-6994 [1] CLIP  
8. 0S-1595 [1] BOLT (1/2-13X1.25-IN)  
9. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
10. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
11. 7E-8827 [2] BRACKET AS-COOLER  
12. 0S-1618 [4] BOLT (5/16-18X1-IN)  
13. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
14. 5S-0003 [4] NUT (5/16-18-THD)  
15. 7E-6633 [1] COOLER-FUEL  
16. 7E-8826 [2] SUPPORT AS-COOLER  
17. 0S-1588 [8] BOLT (3/8-16X1.25-IN)  
18. 9M-6527 [16] WASHER-HARD (10.2X25.5X5-MM THK)  
19. 9S-8752 [8] NUT-FULL (3/8-16-THD)  
20. 4P-1701 [1] KIT-COOLER MOUNTING (FUEL)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25730686
 

2W-0782: COVER GP-GOVERNOR

2W-0782 COVER GP-GOVERNOR
S/N 24Z4366-UP
LIMITER & PNEUMATIC SPEED SETTING
PART OF 124-3172, 6I-0663, 7C-0098 GOVERNOR GP
FIELD REPLACEMENT ORDER @@@@@124-3172@@@@@
AN ATTACHMENT
i00069220 SEBP2573
2W0782 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4182 [1] PLUG (7/16-20-THD)  
2. 6V-5048 [1] SEAL-O-RING  
 

#SEBP25730687
 

1W-2135: DRIVE GP-GOVERNOR

1W-2135 DRIVE GP-GOVERNOR
S/N 24Z4366-UP
PART OF 1W-5024 GOVERNOR GP
AN ATTACHMENT
i00109160 SEBP2573
1W2135 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 6J-2244 [1] SEAL-O-RING  
3. 7N-5700 [1] ADAPTER  
4. 1W-2133 [1] HOUSING AS-DRIVE  
  1W-9379 [1] BUSHING  
5. 1T-0550 [2] PIN-SPRING  
6. 8C-5197 [1] SEAL-O-RING  
7. 0L-2070 [4] BOLT (3/8-16X2.25-IN)  
8. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 7N-5695 [1] GASKET  
10. 7N-5696 [1] COVER  
11. 0S-1594 [5] BOLT (3/8-16X1-IN)  
12. 1N-3409 [1] GEAR-BEVEL (42-TEETH)  
13. 8N-9392 [1] COUPLING-GOVERNOR DRIVE  
14. 7N-5701 [1] PINION-GOVERNOR DRIVE (24-TEETH)  
15. 061-9457 [1] SEAL-O-RING  
16. 6V-8260 [1] SEAL-O-RING  
17. 8T-6757 [3] PLUG-PIPE  
18. 7N-5694 B [1] SHIM (0.8-MM THK)  
19. 1A-7669 [2] BOLT (1/2-13X7-IN)  
20. 9S-4182 [2] PLUG (7/16-20-THD)  
  6V-5048 [2] SEAL-O-RING  
21. 6V-3348 [2] SEAL-O-RING  
22. 1D-4588 [2] BOLT (5/8-11X4.25-IN)  
23. 4H-8158 [1] RING-RETAINING  
24. 0S-1621 [2] BOLT (1/2-13X1-IN)  
25. 3P-0647 [4] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP25730688
 

8N-0117: DRIVE GP-GOVERNOR

8N-0117 DRIVE GP-GOVERNOR
S/N 24Z4366-UP
PART OF 8N-0237 GOVERNOR GP-ELECTRIC
i00427952 SEBP2573
8N0117 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8736 [1] HOUSING AS-MOUNTING  
1A. 4K-8603 [2] PLUG-CUP  
2. 6V-8260 [1] SEAL-O-RING  
3. 6V-3348 [1] SEAL-O-RING  
4. 0S-1625 [2] BOLT (5/8-11X2.5-IN)  
5. 1A-1460 [2] BOLT (1/2-13X2-IN)  
6. 1N-5999 [3] PLUG-O-RING  
7. 7J-0204 [3] SEAL-O-RING  
8. 3K-8460 [1] PLUG (1/2-20-THD)  
9. 1J-9671 [1] SEAL-O-RING  
10. 2W-7253 [1] COUPLING-DRIVE  
 

#SEBP25730689
 

4W-5267: DRIVE GP-TACHOMETER

4W-5267 DRIVE GP-TACHOMETER
S/N 24Z4366-UP
AN ATTACHMENT
i00379582 SEBP2573
4W5267 DRIVE GP-TACHOMETER Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2493 [1] ADAPTER AS-DRIVE  
2. 7H-9899 [2] SEAL  
3. 4M-8303 [2] SEAL-O-RING  
4. 1N-3126 [1] COVER AS-CAMSHAFT DRIVE  
5. 1F-4622 [1] BEARING AS-NEEDLE  
6. 4S-7756 [1] SEAL-LIP TYPE  
7. 5M-4987 [2] DOWEL  
8. 1A-2029 [8] BOLT (3/8-16X1.125-IN)  
9. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
11. 7N-4320 [1] GASKET  
12. 4W-4589 [1] SHAFT-TACHOMETER DRIVE  
13. 4W-4587 [1] ADAPTER-TACHOMETER DRIVE  
14. 5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
15. 9X-8887 [1] BOLT (3/4-10X3-IN)  
16. 9S-0211 [4] CLAMP-METER  
17. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
18. 7N-4076 [1] COVER  
 

Information:

Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed
1983/02/16
Remanufactured Unit Injectors Are Available
1983/08/17
Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow
1984/02/22
Improvements Made To Fuel Filter Housing
1984/10/24
Additional Information For Correct Fuel Injector Timing
1984/12/12
New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load
1984/12/12
New Clamp Added To Right Hand Instrument Panel Fuel Filter Differential Lines Group
1985/05/01
Fuel Filter Service Indicators Now Available
1985/07/01
New O-ring Seals And Additional Clamps Used In Instrument Panel Fuel Filter Differential Lines Group
1985/10/01
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water
1986/01/01
Lubricate Clamp When Installing Unit Injector Assemblies
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Fuel Injector Reference For 3500 Family Engines
1987/01/01
Fuel Injector Trim Bolt
1987/06/01
Additional Information For Installing Fuel Injectors
1988/06/01
Replacement Fuel Injector Nozzles With New Nose Cones Available
1988/08/01
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors
1988/12/01
Fuel Manifolds Changed To Steel
1989/05/01
Check Valve Added To Fuel Injection Lines
1989/05/01
New Clamps With Grommets Used In Fuel Lines
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
New Fuel Injectors Available For Parts Service
1989/09/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
Fuel Return Line Added To Fuel System In Power Modules
1990/05/01
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1)
1990/06/01
Some Fuel Injectors May Be Used In Mixed Sets
1990/06/01
Improvements To Auxiliary Fuel Filter Housing Assembly
1990/06/01
New, Longer Bolt Gives Better Retention To Fuel Injection Lines
1990/06/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
Additional Clip And Hardware Prevent Damage To Fuel Line Of 4W6887 Instrument Panel
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines
1991/05/01
New Return Spring Used In Unit Injectors
1991/08/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New Fuel Filter Housing Assembly Has 180 Degree Supports For Increased Strength{1262}
1996/11/01
SOLAS Requirement for Screening Fuel and Oil Line Connections on Marine Engines {1274, 1307}
2003/06/01
A New Fuel Shield is Available {1252}
2005/03/28
Improved Fuel Cooler {1712}
2005/07/04
Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
A Two Piece Clip and Grommet for the Fuel Lines Are Now Used On Certain Commercial Engines {1250, 1250, 7553}
2013/08/30
Special Instruction
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Australia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CFEL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-CSARL
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Americas
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Truck/Ag/Marine
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-China
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-Asia
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Remove Certain 0R0906, 0R1756, 0R1758, 0R2921, 0R2922, 0R2923, 0R2924, 0R2925, 0R3051, And 0R3052 Remanufactured Unit Injectors Used On 3500 Engines From Parts Stock
Service Magazine
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors{0622,1250}
1981/07/06
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Remanufactured Unit Injectors Are Available{1290}
1983/07/11
New Seal And Washer Will Prevent The Flow Of Dirty Fuel Past The Filter{1261}
1983/10/24
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow{1252}
1984/02/13
Improvements Made To Fuel Filter Housing{1260,1261,1262}
1984/10/22
Additional Information For Correct Fuel Injector Timing{1290}
1984/11/19
New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load{1251,1250}
1984/11/26
A Water Separator Can Help Prevent Fuel Injector Damage If Fuel Is Contaminated With Water{1263,1250,1273}
1985/12/09
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fuel Injector Reference For 3500 Family Engines{1290}
1987/01/19
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Two 11 mm Injectors Available For Parts Service{1250,1290}
1988/06/20
Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Manifolds Changed To Steel {1252,1702}
1989/05/01
Check Valve Added To Fuel Injection Lines {1274}
1989/05/22
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
Fuel Return Line Added To Fuel System In Power Modules {1274}
1990/05/07
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New, Longer Bolt Gives Better Retention To Fuel Injection Lines {1252}
1990/05/28
Improvements To Auxiliary Fuel Filter Housing Assembly {1262}
1990/06/11
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Additional Clip And Hardware Prevent Damage To Fuel Line Of 4W6887 Instrument Panel{1261}
1990/10/15
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
Engine Updates Help Prevent Piston Seizures{1214,1252,1265,1274,1355,1383,1393,1456}
1991/05/13
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines{1252,1702}
1991/05/27
New Return Spring Used In Unit Injectors {1290}
1991/07/22
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

Caterpillar Parts SIS Catalog 3512 :

CONTROL GP-GOVERNOR
7C-4172 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
5N-5442 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
2W-2643 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
2W-0688 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
2W-0543 CONTROL GP-GOVERNOR
133-5617 CONTROL GP-GOVERNOR
133-3066 CONTROL GP-GOVERNOR
131-7253 CONTROL GP-GOVERNOR
COOLER GP-FUEL
6I-3139 COOLER GP-FUEL
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
COOLER GP-FUEL
7E-6681 COOLER GP-FUEL
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
COOLER GP-FUEL
7E-8090 COOLER GP-FUEL
COVER GP-GOVERNOR
2W-0782 COVER GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
8N-0117 DRIVE GP-GOVERNOR

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.