AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6Y-4315 FRAME GP-TRACK ROLLER S/N 3SR1-UP WITH GUIDING GUARDS PART OF 6Y-4312 FRAME AR-TRACK ROLLER D6G SR


UNDERCARRIAGE
FRAME GP-TRACK ROLLER
GUARD GP
IDLER GP
LINK GP-TRACK
ROLLER GP

TRACK-TYPE TRACTOR D6G SR TRACK-TYPE TRACTOR 3SR
 D6G Track-Type Tractor Super Rural 3SR00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2578 D6G SR 3SR   (1996)

UNDERCARRIAGE

FRAME GP-TRACK ROLLER
6Y-4312 FRAME AR-TRACK ROLLER
FRAME GP-TRACK ROLLER
6Y-4315 FRAME GP-TRACK ROLLER
 

#SEBP25780170
 

6Y-4315: FRAME GP-TRACK ROLLER

6Y-4315 FRAME GP-TRACK ROLLER
S/N 3SR1-UP
WITH GUIDING GUARDS
PART OF 6Y-4312 FRAME AR-TRACK ROLLER
i00391793 SEBP2578
6Y4315 FRAME GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
2. 7X-0351 [4] BOLT (5/8-11X3.75-IN)  
3. 7M-1825 [2] CAP AS-BEARING  
    (EACH INCLUDES)
  7M-0699 [1] CAP-BRACE BEARING  
  9P-7752 [1] DOWEL  
4. 6V-8544 [8] SEAL-SPLIT BEARING  
5. 3B-8490 [2] FITTING-GREASE (1/4-18 PTF)  
6. 7X-0358 [4] BOLT (5/8-11X5.5-IN)  
7. 9G-6038 [1] FRAME AS-TRACK ROLLER (RH)  
7A. 7M-0409 [1] BEARING-FINAL DRIVE  
  7X-0391 [2] BOLT (7/8-9X5.5-IN)  
  226-0204 [1] CAP  
8. 9G-6037 [1] FRAME AS-TRACK ROLLER (LH)  
8A. 7M-0409 [1] BEARING-FINAL DRIVE  
  7X-0391 [2] BOLT (7/8-9X5.5-IN)  
  226-0204 [1] CAP  
9. 1B-4367 [8] BOLT (5/8-11X3-IN)  
10. 1S-8734 [4] BRACKET-ROLLER  
11. 1A-1135 [16] BOLT (5/8-11X2-IN)  
12. 7B-3235 [24] BOLT (1/2-13X1.375-IN)  
13. 5P-8245 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 7G-8389 [2] GUARD  
15. 7X-0365 [8] BOLT (3/4-10X1.5-IN)  
16. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
17. 9S-8245 [3] STRIP  
18. 9S-8246 [3] STRIP  
19. 7T-0205 [4] BEARING-BRACE  
20. 2S-5658 [24] WASHER-HARD (17X29X3-MM THK)  
 

#SEBP25780171
 

7G-8390: GUARD GP-TRACK GUIDE

7G-8390 GUARD GP-TRACK GUIDE
S/N 3SR1-UP
CENTER
AN ATTACHMENT
i00401270 SEBP2578
7G8390 GUARD GP-TRACK GUIDE Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4608 [8] BOLT (3/4-10X2.75-IN)  
  2S-0115 [8] WASHER-HARD (20X36.5X5-MM THK)  
  3P-4133 [8] SPACER (0.781X1.5X1-IN THK)  
2. 7G-8400 [2] GUARD AS-TRACK ROLLER  
3. 6H-1717 [16] BOLT (1/2-13X1.125-IN)  
  3B-4508 [16] LOCKWASHER  
4. 3V-1133 [4] STRIP  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#SEBP25780172
 

6Y-4313: GUARD GP-TRACK ROLLER

6Y-4313 GUARD GP-TRACK ROLLER
S/N 3SR1-UP
PART OF 6Y-4312 FRAME AR-TRACK ROLLER
i00391781 SEBP2578
6Y4313 GUARD GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1669 [2] GUARD  
2. 8M-7207 [1] GUARD AS-FRAME  
  8M-7208 [1] GUARD AS-FRAME (LH)(LH)  
    (EA GUARD AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
3. 8C-4436 C [30] BOLT (1/2-13X1.375-IN)  
4. 4S-5049 [1] GUARD AS (RH)  
  4S-5050 [1] GUARD AS (LH)  
5. 5C-6565 C [14] BOLT (1/2-13X1.125-IN)  
6. 4L-6454 [2] BOLT (3/8-16X1-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 2S-6261 [1] GUARD AS-SPRING (RH)  
  2S-6262 [1] GUARD AS-SPRING (LH)  
    (EA GUARD AS INCLUDES)
8. 5H-8991 [1] SHAFT  
9. 2S-6267 [1] COVER AS  
  9S-7869 [1] COVER AS  
10. 1S-5242 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
11. 7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
12. 5P-1076 C [10] WASHER-HARD (13.5X30X4-MM THK)  
13. 2Y-1948 C [34] SPACER (9.5MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25780173
 

9G-7639: GUARD GP-TRACK ROLLER

9G-7639 GUARD GP-TRACK ROLLER
S/N 3SR1-UP
FOR USE WITH END GUIDE GUARDING
AN ATTACHMENT
i00429835 SEBP2578
9G7639 GUARD GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9399 [4] BOLT (3/4-10X2.25-IN)  
  8T-4994 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
  1B-4206 [6] NUT (5/8-18-THD)  
  8T-4122 [12] WASHER-HARD (17X32X3.5-MM THK)  
3. 7M-2527 [2] PLATE  
4. 9G-7634 [1] GUARD AS-TRACK ROLLER (INNER RH)  
  9G-7636 [1] GUARD AS-TRACK ROLLER (INNER LH)  
5. 1D-4608 [26] BOLT (3/4-10X2.75-IN)  
  2S-0115 [26] WASHER-HARD (20X36.5X5-MM THK)  
  3P-4133 [26] SPACER (0.781X1.5X1-IN THK)  
6. 9G-7638 [1] GUARD AS-TRACK ROLLER (OUTER RH)  
  9G-7643 [1] GUARD AS-TRACK ROLLER (OUTER LH)  
7. 2M-4668 [6] RETAINER-GUARD  
8. 7M-2530 BE [6] TUBE  
9. 8T-8917 [12] BOLT (1/2-13X1.25-IN)  
  8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 7M-2532 [6] TIE ROD AS  
    (EACH INCLUDES)
  1B-4206 [1] NUT (5/8-18-THD)  
  7M-2531 [1] TIE ROD  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP25780174
 

6Y-4314: IDLER GP-FRONT

6Y-4314 IDLER GP-FRONT
S/N 3SR1-UP
PART OF 6Y-4312 FRAME AR-TRACK ROLLER
i00391789 SEBP2578
6Y4314 IDLER GP-FRONT Parts scheme 6Y4314 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
2. 1D-4720 [8] NUT (5/8-11-THD)  
3. 2S-5926 [2] VALVE-RELIEF  
4. 5M-6708 [4] WASHER (0.609X1.25X0.219-IN THK)  
5. 190-8609 [2] VALVE-FILL  
6. 1A-8537 [8] BOLT (5/8-11X2.75-IN)  
7. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
8. 1F-5151 [8] DOWEL  
9. 7M-1861 [2] STOP-SPRING (RH)(RH OUTER-LH INNER)  
  7M-1862 [2] STOP-SPRING (LH)(RH INNER-LH OUTER)  
10. 5L-4398 [8] BOLT (1/2-13X2.25-IN)  
11. 4B-1382 [8] PLATE-SPRING CAP  
12. 8M-6217 [2] GUARD-IDLER (RH)(RH OUTER-LH INNER)  
  8M-6218 [2] GUARD-IDLER (LH)(RH INNER-LH OUTER)  
13. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
  0T-0329 [2] LOCKNUT  
14. 7M-2461 [2] WASHER  
15. 9G-6476 [2] ROD GP-RECOIL  
    (EACH INCLUDES)
  2S-5927 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
  7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
16. 5P-8245 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 2P-7984 [2] YOKE AS-IDLER  
18. 5M-5009 [2] IDLER AS  
19. 4F-5004 [8] SPRING AS-ARM  
20. 7M-1845 [4] PLATE AS-SPRING  
21. 1D-4556 [4] BOLT (7/16-14X2.75-IN)  
  5P-8244 [4] WASHER-HARD (12X22.5X2.5-MM THK)  
22. 8S-9089 [16] BOLT (1/2-13X4.5-IN)  
  9M-6692 [8] STRIP  
  9M-3486 [8] SPACER (2.427-IN THK)  
23. 6F-4991 [8] BOLT (7/8-14X6.5-IN)  
  4M-6953 [8] WASHER-HARD (24X38X3.5-MM THK)  
24. 5M-5000 [4] LOCK-PIN  
25. 8M-6191 [2] SLEEVE-BOLT  
26. 9M-3770 [2] NUT-FULL (1-3/8-6-THD)  
27. 0S-1620 [2] BOLT (1/2-13X0.75-IN)  
28. 2S-1654 [2] WASHER (3.5X44.5X6-MM THK)  
29. 7M-1856 [2] PILOT-SPRING  
30. 3P-1459 [2] SPRING-RECOIL  
31. 0S-1588 [24] BOLT (3/8-16X1.25-IN)  
  5M-2894 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
32. 5M-5003 [2] BEARING-SHAFT (RH)(RH OUTER-LH INNER)  
33. 5F-8000 [4] SEAL-O-RING  
34. 5M-5005 [2] SHAFT-IDLER  
35. 7M-1776 [4] PLATE-IDLER GUIDE  
36. 3P-1900 [4] BUSHING AS-IDLER  
    (EACH INCLUDES)
37. 9B-2289 [2] PIN  
38. 1H-6227 [4] SEAL-O-RING  
39. 7M-1859 [2] PILOT AS-SPRING  
  1K-3227 [2] GUSSET  
40. 5F-0149 [2] SEAL-O-RING  
41. 4S-9006 [2] SEAL-PACKING  
42. 1H-8397 [2] RING-RETAINING  
43. 8H-7980 [2] PISTON  
44. 5M-2997 [2] SEAL (.109X3.062X.210 IN)  
45. 5M-2998 [2] RING-EXTRUSION  
46. 1S-5331 [2] CYLINDER  
47. 6H-6269 [4] RING-WEAR  
48. 7M-1851 [2] BOLT-SPRING  
49. 1A-8537 [8] BOLT (5/8-11X2.75-IN)  
  5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
50. 9G-8303 [4] COLLAR-IDLER END  
51. 7M-1857 B [12] SHIM-COLLAR (1-MM THK)  
52. 5M-5004 [2] BEARING-SHAFT (LH)(RH INNER-LH OUTER)  
53. 2P-0347 [2] PLUG  
  1S-8947 [2] SEAL-O-RING  
54. 7M-1848 B [48] SHIM-GUIDE PLATE  
55. 1M-8747 [4] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
56. 8H-2262 [2] RING-TORIC  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
 

#SEBP25780175
 

117-1020: LINK AS-TRACK

117-1020 LINK AS-TRACK
S/N 3SR1-UP
SEALED & LUBRICATED
PART OF 100-4437, 100-4439, 6Y-6897 TRACK GP
AN ATTACHMENT
i01417115 SEBP2578
1171020 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0473 [39] PLUG-CLEAR  
2. 5G-2247 [39] STOPPER-RUBBER  
3. 3P-1104 [78] RING-THRUST  
4. 9W-8124 [78] SEAL AS  
5. 3P-1112 [38] LINK-TRACK (RH)  
6. 3P-1113 [38] LINK-TRACK (LH)  
7. 6Y-6745 [1] LINK-TRACK MASTER (BUSHING END, RH)  
    (MASTER)
8. 6Y-6746 [1] LINK-TRACK MASTER (BUSHING END, LH)  
    (MASTER)
9. 6Y-6743 [1] LINK-TRACK MASTER (PIN END, RH)  
    (MASTER)
10. 6Y-6744 [1] LINK-TRACK MASTER (PIN END, LH)  
    (MASTER)
11. 8E-5257 [39] BUSHING-TRACK  
12. 160-7819 [39] PIN-TRACK  
 

#SEBP25780176
 

3P-1120: LINK AS-TRACK

3P-1120 LINK AS-TRACK
S/N 3SR1-UP
SEALED & LUBRICATED
PART OF 100-4407, 100-4437, 100-4439, 6Y-6897 TRACK GP
ALSO AN ATTACHMENT
i00367078 SEBP2578
3P1120 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0473 [39] PLUG-CLEAR  
2. 9G-1642 [39] STOPPER-RUBBER  
3. 3P-1104 [78] RING-THRUST  
4. 9W-8124 C [78] SEAL AS  
5. 3P-1112 [38] LINK-TRACK (RH)  
6. 3P-1113 [38] LINK-TRACK (LH)  
7. 6Y-6745 [1] LINK-TRACK MASTER (BUSHING END, RH)  
    (MASTER)
8. 6Y-6746 [1] LINK-TRACK MASTER (BUSHING END, LH)  
    (MASTER)
9. 6Y-6743 [1] LINK-TRACK MASTER (PIN END, RH)  
    (MASTER)
10. 6Y-6744 [1] LINK-TRACK MASTER (PIN END, LH)  
    (MASTER)
11. 3P-1109 [39] BUSHING-TRACK  
12. 3P-1108 [39] PIN-TRACK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25780177
 

3T-3206: ROLLER GP-TRACK CARRIER

3T-3206 ROLLER GP-TRACK CARRIER
S/N 3SR1-UP
PART OF 6Y-4312 FRAME AR-TRACK ROLLER
i00368418 SEBP2578
3T3206 ROLLER GP-TRACK CARRIER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8320 [1] ROLLER AS  
2. 9S-3567 [1] COLLAR AS-END  
3. 1M-4291 [2] DOWEL  
4. 3T-3207 [1] SHAFT-ROLLER  
5. 1H-9696 [1] SEAL-O-RING  
6. 1M-7914 [1] RING-RETAINING  
7. 9W-6647 [1] SEAL GP-DUO-CONE  
8. 8H-2262 [2] RING-TORIC  
9. 126-1347 [2] BEARING AS-SPECIAL  
    (EACH INCLUDES)
  9S-3582 [1] CONE-BEARING  
10. 9S-3581 [1] CUP-BEARING  
11. 8P-6188 [1] PLATE-RETAINER  
12. 2H-6338 [1] SEAL-O-RING  
13. 5K-9107 [2] BOLT-LOCKING (3/8-16X0.75-IN)  
14. 2P-0347 [1] PLUG  
15. 1S-8947 [1] SEAL-O-RING  
16. 0S-1594 [3] BOLT (3/8-16X1-IN)  
  5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 5M-2043 [1] COVER-ROLLER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25780178
 

118-1618: ROLLER GP-TRACK-DOUBLE FLANGE

118-1618 ROLLER GP-TRACK-DOUBLE FLANGE
S/N 3SR1-UP
PART OF 9G-8034 ROLLER GP-TRACK-DOUBLE FLANGE
FIELD REPLACEMENT FOR @@@@@ 9G-8034@@@@@
i00480556 SEBP2578
1181618 ROLLER GP-TRACK-DOUBLE FLANGE Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-0418 [2] COLLAR-ROLLER END  
2. 116-6702 [1] SHAFT-TRACK ROLLER  
3. 9W-6647 [1] SEAL GP-DUO-CONE  
  8H-2262 [2] RING-TORIC  
4. 2P-3201 [12] BOLT-WASHER HEAD (3/8-16X1-IN)  
5. 2H-3928 [2] SEAL-O-RING  
6. 2P-8048 [2] BUSHING AS-ROLLER  
  9B-2289 [2] PIN  
  8P-5197 [1] BEARING AS  
7. 9G-8032 [1] RIM AS-TRACK ROLLER  
8. 5F-8000 [2] SEAL-O-RING  
9. 6Y-0473 [1] PLUG-CLEAR  
  7G-4332 [1] STOPPER  
10. 5M-4443 [2] RING-LOCK  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25780179
 

9G-8034: ROLLER GP-TRACK-DOUBLE FLANGE

9G-8034 ROLLER GP-TRACK-DOUBLE FLANGE
S/N 3SR1-UP
PART OF 6Y-4312 FRAME AR-TRACK ROLLER
FIELD REPLACEMENT ORDER @@@@@118-1618@@@@@
i00429978 SEBP2578
9G8034 ROLLER GP-TRACK-DOUBLE FLANGE Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-1618 CY [1] ROLLER GP-TRACK-DOUBLE FLANGE  
2. 1D-4608 [4] BOLT (3/4-10X2.75-IN)  
3. 5H-1504 [4] WASHER-HARD (20X33.5X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Track Roller Frame Bearings - Lubricate
D6F SR, D6G and D6G SR Track-Type Tractors
Tool Operating Manual
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Disassembly and Assembly
Track Roller Frames
D6E TRACTOR POWER TRAIN
Track Roller Frame - Remove
D6G Track-Type Tractor Power Train
Track Roller Frame - Install
D6G Track-Type Tractor Power Train

Caterpillar Parts SIS Catalog D6G SR :

6Y-4312 FRAME AR-TRACK ROLLER
BAR GP-EQUALIZER
6Y-4316 BAR GP-EQUALIZER
SUPPORT GP-FENDER
125-8661 SUPPORT GP-FENDER
HOOD & DASH GP
124-2872 HOOD & DASH GP
GUARD GP-RADIATOR
5Y-2006 GUARD GP-RADIATOR
GUARD GP-CRANKCASE
5Y-2066 GUARD GP-CRANKCASE
GUARD AS-RADIATOR
5Y-2007 GUARD AS-RADIATOR
FLOORPLATE GP
124-4483 FLOORPLATE GP
GUARD GP-TRACK GUIDE
7G-8390 GUARD GP-TRACK GUIDE
GUARD GP-TRACK ROLLER
6Y-4313 GUARD GP-TRACK ROLLER
GUARD GP-TRACK ROLLER
9G-7639 GUARD GP-TRACK ROLLER
IDLER GP-FRONT
6Y-4314 IDLER GP-FRONT
LINK AS-TRACK
117-1020 LINK AS-TRACK
LINK AS-TRACK
3P-1120 LINK AS-TRACK
ROLLER GP-TRACK CARRIER
3T-3206 ROLLER GP-TRACK CARRIER
ROLLER GP-TRACK-DOUBLE FLANGE
118-1618 ROLLER GP-TRACK-DOUBLE FLANGE

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.