AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130-6135 CYLINDER GP-RIPPER S/N 5PP1-UP 184.15MM (7.25 IN.) BORE X 305MM (12 IN.) STROKE PART OF 130-3430 RIPPER AR Type 1 AN ATTACHMENT D6G SR


HYDRAULIC SYSTEM
CYLINDER GP
FILTER GP
HYDRAULIC GP
LINES GP-BULLDOZER

TRACK-TYPE TRACTOR D6G SR TRACK-TYPE TRACTOR 3SR
 D6G Track-Type Tractor Super Rural 3SR00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2578 D6G SR 3SR   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
BRACKET GP-CYLINDER
5Y-2129 BRACKET GP-CYLINDER
143-8588 CYLINDER AR-TILT
CYLINDER AR-TILT
2Y-8590 CYLINDER AR-TILT
CYLINDER GP-BULLDOZER LIFT
124-4772 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
8J-6868 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
CYLINDER GP-RIPPER
130-6135 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
130-6135 CYLINDER GP-RIPPER
CYLINDER GP-TILT
9T-2797 CYLINDER GP-TILT
 

#SEBP25780200
 

130-6135: CYLINDER GP-RIPPER

130-6135 CYLINDER GP-RIPPER
S/N 5PP1-UP
184.15MM (7.25 IN.) BORE X 305MM (12 IN.) STROKE
PART OF 130-3430 RIPPER AR
Type 1
AN ATTACHMENT
i00502814 SEBP2578
1306135 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
2. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 2Y-1349 [2] FLANGE  
4. 5H-4019 [1] COVER  
5. 4J-0520 [1] SEAL-O-RING  
6. 131-1133 [1] HEAD-HYDRAULIC CYLINDER  
7. 2J-0564 [1] LOCKNUT (2-12-THD)  
8. 1J-2674 [1] RING-WEAR  
9. 5J-4993 [1] SEAL AS  
  5J-4407 [1] RING-EXPANDER  
10. 8J-1772 [1] PISTON  
11. 2K-2939 [1] SEAL-O-RING  
12. 2K-2940 [1] RING-BACKUP  
13. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
14. 3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
15. 2K-2037 [4] BOLT (1-1/8-7X2.75-IN)  
16. 8C-3840 [1] SEAL-LIP TYPE  
17. 5J-0964 [1] SEAL-U-CUP  
18. 8C-3839 [1] SEAL AS  
19. 8T-5668 [1] RING-WEAR  
20. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
21. 8J-1777 [1] ROD AS  
22. 2K-4507 [1] BUSHING  
23. 131-1132 [1] CYLINDER AS  
24. 1J-2675 [1] JUNCTION BLOCK  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25780201
 

130-6135: CYLINDER GP-RIPPER

130-6135 CYLINDER GP-RIPPER
S/N 5PP1-UP
184.15MM (7.25 IN.) BORE X 305MM (12 IN.) STROKE
PART OF 130-3430 RIPPER AR
Type 2
AN ATTACHMENT
i01424026 SEBP2578
1306135 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
2. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 2Y-1349 [2] FLANGE  
4. 5H-4019 [1] COVER  
5. 4J-0520 [1] SEAL-O-RING  
6. 131-1133 [1] HEAD-HYDRAULIC CYLINDER  
7. 2J-0564 [1] LOCKNUT (2-12-THD)  
8. 1J-2674 [1] RING-WEAR  
9. 5J-4993 [1] SEAL AS  
  5J-4407 [1] RING-EXPANDER  
10. 8J-1772 [1] PISTON  
11. 2K-2939 [1] SEAL-O-RING  
12. 2K-2940 [1] RING-BACKUP  
13. 8T-5668 [1] RING-WEAR  
14. 3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
15. 2K-2037 [4] BOLT (1-1/8-7X2.75-IN)  
16. 167-2463 C [1] SEAL-WIPER  
17. 167-2312 C [1] SEAL-U-CUP  
18. 167-2201 C [1] SEAL AS-BUFFER  
19. 131-1132 [1] CYLINDER AS  
20. 1J-2675 [1] JUNCTION BLOCK  
21. 8J-1777 [1] ROD AS  
22. 2K-4507 [1] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25780202
 

9T-2797: CYLINDER GP-TILT

9T-2797 CYLINDER GP-TILT
S/N 3SR1-UP
152MM (6 IN) BORE X 102MM (4 IN) STROKE
PART OF 143-8588 CYLINDER AR-TILT
AN ATTACHMENT
i00433133 SEBP2578
9T2797 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6559 [2] CAP-BEARING  
2. 8E-9212 B [32] SHIM (0.8-MM THK)  
3. 9T-2795 [1] CYLINDER AS  
  7J-7816 [1] YOKE AS  
4. 5F-1678 [1] SEAL-O-RING  
5. 0T-0055 [4] BOLT (3/8-16X4.25-IN)  
6. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 5J-7893 [1] TUBE AS  
8. 0S-1594 [1] BOLT (3/8-16X1-IN)  
  1D-4717 [1] NUT (3/8-16-THD)  
9. 5H-3252 [1] SEAL-O-RING  
10. 4F-8420 B [1] PACKING  
11. 4F-8421 B [6] SHIM (0.25-MM THK)  
12. 167-2463 [1] SEAL-WIPER  
13. 7J-3169 [1] ROD AS  
14. 3B-2968 [8] BOLT (3/4-10X3.5-IN)  
  5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
15. 2A-4639 [4] BOLT (3/8-16X1.625-IN)  
16. 2J-3243 [1] RETAINER  
17. 1D-4627 [4] BOLT (7/8-9X3-IN)  
  5P-8249 [4] WASHER-HARD (24X41.5X4-MM THK)  
18. 5J-7889 [1] HEAD  
19. 4J-4500 [2] WASHER (1.757X3X0.25-IN THK)  
20. 5J-4989 [1] SEAL AS  
21. 9T-2787 [1] PISTON AS  
  6T-9609 [1] SPRING  
22. 5J-0014 [1] RING-WEAR  
23. 5J-5731 [1] LOCKNUT (1-3/4-12-THD)  
24. 2K-3258 [1] RING-BACKUP  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25780203
 

101-3834: FILTER GP-OIL

101-3834 FILTER GP-OIL
S/N 3SR1-UP
PART OF 128-3214 LINES GP-PUMP
AN ATTACHMENT
i00463292 SEBP2578
1013834 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0973 [1] FILTER-OIL (ADVANCED EFFICIENCY)  
2. 101-1168 [1] PLUG  
3. 3J-1907 [1] SEAL-O-RING  
4. 5F-9144 [1] SEAL-O-RING  
 

#SEBP25780204
 

128-3859: HYDRAULIC AR

128-3859 HYDRAULIC AR -3 VALVE
S/N 3SR1-UP
BLADE LIFT-2 REAR ATTACHMENTS
AN ATTACHMENT
i00520327 SEBP2578
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  132-6251 Y [1] CONTROL GP-HYDRAULIC  
  126-3923 Y [1] LINES GP-BULLDOZER  
  126-3690 Y [1] LINES GP-HYDRAULIC  
  128-3214 Y [1] LINES GP-PUMP  
  128-3215 Y [1] PUMP GP-GEAR  
  125-0339 Y [1] TANK GP-HYDRAULIC  
  128-3217 Y [1] VALVE GP-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780205
 

128-5648: HYDRAULIC AR

128-5648 HYDRAULIC AR
S/N 3SR1-UP
BLADE LIFT
AN ATTACHMENT
i00521057 SEBP2578
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  132-6877 Y [1] CONTROL GP-HYDRAULIC  
  126-3923 Y [1] LINES GP-BULLDOZER  
  128-3214 Y [1] LINES GP-PUMP  
  128-3215 Y [1] PUMP GP-GEAR  
  125-0339 Y [1] TANK GP-HYDRAULIC  
  128-5678 Y [1] VALVE GP-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780206
 

128-5644: HYDRAULIC AR-2 VALVE

128-5644 HYDRAULIC AR-2 VALVE
S/N 3SR1-UP
BLADE LIFT-REAR ATTACHMENT
AN ATTACHMENT
i00521054 SEBP2578
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  132-7956 Y [1] CONTROL GP-HYDRAULIC  
  126-3923 Y [1] LINES GP-BULLDOZER  
  128-3214 Y [1] LINES GP-PUMP  
  126-3692 Y [1] LINES GP-REAR ATTACHMENT  
  128-3215 Y [1] PUMP GP-GEAR  
  125-0339 Y [1] TANK GP-HYDRAULIC  
  128-5677 Y [1] VALVE & MTG GP-MAIN CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780207
 

128-5647: HYDRAULIC AR-2 VALVE

128-5647 HYDRAULIC AR-2 VALVE
S/N 3SR1-UP
BLADE LIFT-BLADE TILT
AN ATTACHMENT
i00521055 SEBP2578
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  132-7329 Y [1] CONTROL GP-HYDRAULIC  
  126-3923 Y [1] LINES GP-BULLDOZER  
  128-3214 Y [1] LINES GP-PUMP  
  126-8088 Y [1] LINES GP-TILT  
  128-3215 Y [1] PUMP GP-GEAR  
  125-0339 Y [1] TANK GP-HYDRAULIC  
  128-5677 Y [1] VALVE & MTG GP-MAIN CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780208
 

126-3923: LINES GP-BULLDOZER

126-3923 LINES GP-BULLDOZER
S/N 3SR1-UP
PART OF 128-3859, 128-5648 HYDRAULIC AR, 128-5644, 128-5647 HYDRAULIC AR-2 VALVE
AN ATTACHMENT
i00707643 SEBP2578
1263923 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-6276 [2] CONNECTOR  
2. 3D-2824 [4] SEAL-O-RING  
3. 126-3933 I [2] HOSE AS  
4. 2P-7211 [2] TEE  
5. 126-3932 [4] FLANGE  
6. 4J-0520 [4] SEAL-O-RING  
7. 0S-1571 [16] BOLT (3/8-16X1.75-IN)  
8. 5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 0S-1621 [1] BOLT (1/2-13X1-IN)  
10. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8D-9947 [2] CLIP  
12. 8T-2502 [3] BOLT (3/8-16X1.125-IN)  
13. 6V-8801 [1] NUT (3/8-16-THD)  
14. [1] BRACKET  
15. 4S-6680 [2] CONNECTOR  
16. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 128-4244 I [1] HOSE AS  
18. 126-3931 I [1] HOSE AS  
19. 1P-4576 [8] FLANGE-HALF  
20. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
21. 130-4835 [1] BRACKET  
22. 7M-8485 [2] SEAL-O-RING  
23. 7G-3832 [3] GROMMET  
24. 7G-3834 [3] CLIP (SLOT)  
25. 7G-3833 [3] CLIP (TAB)  
26. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 5P-2228 [4] BOLT (1/2-13X1-IN)  
28. 6V-8188 [4] NUT (1/2-13-THD)  
29. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25780209
 

140-6634: LINES GP-BULLDOZER

140-6634 LINES GP-BULLDOZER
S/N 6SP1-UP; 6TP1-UP; 6WP1-UP
PART OF 140-6635, 140-6636 BULLDOZER AR-ANGLING, 140-6637 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00500254 SEBP2578
1406634 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [16] BOLT (3/8-16X1.75-IN)  
2. 5M-2894 [36] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 1P-4576 [8] FLANGE-HALF  
4. 8B-2133 [2] BOSS  
5. 1A-1460 [2] BOLT (1/2-13X2-IN)  
6. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 8J-1182 [4] CLAMP  
8. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
9. 6K-8564 [2] STRIP AS  
    (EACH INCLUDES)
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
10. 3H-5522 [2] PLATE-CONNECTOR  
11. 4J-5267 [8] SEAL-O-RING  
12. 7G-2450 I [2] HOSE AS  
13. 3K-6060 [8] LOCKNUT (3/8-16-THD)  
14. 9P-7232 [2] TUBE AS  
15. 4J-0519 [6] SEAL-O-RING  
16. 2P-9017 [2] BRACKET AS  
    (EACH INCLUDES)
  2P-9015 [1] SPACER (14.3X21.7X69.9-MM THK)  
17. 1P-7018 [2] PLATE-ORIFICE  
18. 3P-0550 [2] ELBOW  
19. 6P-8063 [2] TUBE AS  
20. 3P-0568 I [2] HOSE AS  
21. 2A-4639 [4] BOLT (3/8-16X1.625-IN)  
23. 8M-4988 [4] SEAL-O-RING  
24. 6V-8801 [2] NUT (3/8-16-THD)  
25. 0S-1590 [10] BOLT (3/8-16X2-IN)  
26. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
27. 7S-6719 [2] STUD-TAPERLOCK (3/8-16-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Operation and Maintenance Manual
Bulldozer Cylinder Support Bearings - Lubricate - If Equipped
D6F SR, D6G and D6G SR Track-Type Tractors
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Bulldozer Tilt Cylinder
D6F and D6G Track-Type Tractors Hydraulic System
Ripper Cylinder
D6F and D6G Track-Type Tractors Hydraulic System
Bulldozer Lift Cylinder
D6F and D6G Track-Type Tractors Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Remove 9S-8900 Double Acting Cylinders From Service and Contact The Dealer Service Tools Hotline {0617, 5102, 7562}
2007/01/22
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6G SR :

CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
CYLINDER GP-BULLDOZER LIFT
8J-6868 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
124-4772 CYLINDER GP-BULLDOZER LIFT
CYLINDER AR-TILT
2Y-8590 CYLINDER AR-TILT
143-8588 CYLINDER AR-TILT
BRACKET GP-CYLINDER
5Y-2129 BRACKET GP-CYLINDER
MECHANISM GP-BRAKE
125-9182 MECHANISM GP-BRAKE
MECHANISM GP-BRAKE
125-9182 MECHANISM GP-BRAKE
CYLINDER GP-RIPPER
130-6135 CYLINDER GP-RIPPER
CYLINDER GP-TILT
9T-2797 CYLINDER GP-TILT
FILTER GP-OIL
101-3834 FILTER GP-OIL
128-3859 HYDRAULIC AR
128-5648 HYDRAULIC AR
128-5644 HYDRAULIC AR-2 VALVE
128-5647 HYDRAULIC AR-2 VALVE
LINES GP-BULLDOZER
126-3923 LINES GP-BULLDOZER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.