AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

111-0578 BLADE GP-ANGLING S/N 6TP1-UP PART OF 140-6636 BULLDOZER AR-ANGLING Type 1 AN ATTACHMENT D6G SR


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D6G SR TRACK-TYPE TRACTOR 3SR
 D6G Track-Type Tractor Super Rural 3SR00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2578 D6G SR 3SR   (1996)

WORK TOOLS

BLADE GP
BLADE AS-STRAIGHT
7T-4585 BLADE AS-STRAIGHT
BLADE GP-ANGLING
111-0578 BLADE GP-ANGLING
BLADE GP-ANGLING
111-0578 BLADE GP-ANGLING
BLADE GP-ANGLING
9J-8528 BLADE GP-ANGLING
BLADE GP-STRAIGHT
7T-4586 BLADE GP-STRAIGHT
 

#SEBP25780270
 

111-0578: BLADE GP-ANGLING

111-0578 BLADE GP-ANGLING
S/N 6TP1-UP
PART OF 140-6636 BULLDOZER AR-ANGLING
Type 1
AN ATTACHMENT
i00474884 SEBP2578
1110578 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-8063 [16] BOLT (3/4-10X2.5-IN)  
2. 3B-4512 [16] LOCKWASHER  
3. 111-0579 [1] BLADE AS-ANGLING  
  3J-5030 [1] PLATE-WEAR  
  3J-5029 [1] PLATE-WEAR  
4. 3J-5026 [1] REINFORCEMENT  
5. 9J-8427 [1] BRACKET  
6. 3J-6567 [2] RETAINER  
7. 3J-6570 [4] SUPPORT-BEARING  
8. 3J-6575 [4] BEARING  
9. 3B-4627 [1] PIN-COTTER  
10. 4F-0255 [1] PIN (12.7MM DIA)  
11. 3F-6149 [1] PIN (50.72MM DIA)  
12. 7J-2778 Y [1] EDGE GP-BIT & CUTTING (ANGLING)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780271
 

111-0578: BLADE GP-ANGLING

111-0578 BLADE GP-ANGLING
S/N 6TP1-UP
PART OF 140-6636 BULLDOZER AR-ANGLING
Type 2
AN ATTACHMENT
i00993633 SEBP2578
1110578 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-8063 [16] BOLT (3/4-10X2.5-IN)  
2. 3B-4512 [16] LOCKWASHER  
3. 111-0579 [1] BLADE AS-ANGLING  
  3J-5030 [1] PLATE-WEAR  
  3J-5029 [1] PLATE-WEAR  
4. 3J-5026 [1] REINFORCEMENT  
5. 9J-8427 [1] BRACKET  
6. 3J-6567 [2] RETAINER  
7. 3J-6570 [4] SUPPORT-BEARING  
8. 4T-6151 C [4] TRUNNION  
9. 3B-4627 [1] PIN-COTTER  
10. 4F-0255 [1] PIN (12.7MM DIA)  
11. 3F-6149 [1] PIN (50.72MM DIA)  
12. 7J-2778 Y [1] EDGE GP-BIT & CUTTING (ANGLING)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780272
 

9J-8528: BLADE GP-ANGLING

9J-8528 BLADE GP-ANGLING
S/N 6SP1-UP
PART OF 140-6635 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00434410 SEBP2578
9J8528 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6575 [4] BEARING  
2. 1A-8063 [16] BOLT (3/4-10X2.5-IN)  
3. 3B-4512 [16] LOCKWASHER  
4. 9J-8427 [1] BRACKET  
5. 3J-5030 [1] PLATE-WEAR (END)  
6. 3F-6149 [1] PIN  
7. 9J-8418 [1] SHOE  
8. 5J-6940 [1] BIT-END  
  4J-8261 A [1] BIT-END  
9. 3J-5029 [1] PLATE-WEAR (END)  
10. 3J-6570 [4] SUPPORT-BEARING  
11. 9J-8417 [1] SHOE  
12. 5J-6939 [1] BIT-END  
  4J-8261 A [1] BIT-END  
13. 6J-1406 [2] EDGE-CUTTING  
14. 4F-7827 [32] BOLT-PLOW (3/4-10X2.25-IN)  
15. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
16. 4F-0255 [1] PIN  
17. 3B-4626 [1] PIN-COTTER  
18. 5P-4020 AC [1] PLATE-SERIAL NUMBER (BULLDOZER)  
  4B-4158 AC [2] SCREW-DRIVE (NO 4X0.25-IN)  
  3J-3740 A [1] PLATE-SERVICE INFORMATION  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25780273
 

7T-4586: BLADE GP-STRAIGHT

7T-4586 BLADE GP-STRAIGHT
S/N 6WP1-UP
PART OF 140-6637 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00422874 SEBP2578
7T4586 BLADE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-2783 Y [1] EDGE GP-BIT & CUTTING  
2. 7T-4585 Y [1] BLADE AS-STRAIGHT  
3. 4J-1611 [2] PLATE-WEAR  
4. 4J-9853 B [8] SHIM (3-MM THK)  
5. 5F-8933 [4] BOLT-PLOW (3/4-10X3.75-IN)  
6. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
7. 3B-4512 [4] LOCKWASHER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780274
 

7J-2778: EDGE GP-BIT & CUTTING

7J-2778 EDGE GP-BIT & CUTTING
S/N 6TP1-UP
PART OF 111-0578 BLADE GP-ANGLING
AN ATTACHMENT
i01344989 SEBP2578
7J2778 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3009 [2] EDGE-CUTTING  
2. 3G-8297 [1] BIT-END (RH)  
3. 3G-8298 [1] BIT-END (LH)  
4. 4F-7827 [32] BOLT-PLOW (3/4-10X2.25-IN)  
5. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
 

#SEBP25780275
 

7J-2783: EDGE GP-BIT & CUTTING

7J-2783 EDGE GP-BIT & CUTTING
S/N 6WP1-UP
PART OF 7T-4586 BLADE GP-STRAIGHT
AN ATTACHMENT
i00405988 SEBP2578
7J2783 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3013 [1] EDGE-CUTTING (CENTER)  
2. 4F-7827 [27] BOLT-PLOW (3/4-10X2.25-IN)  
  2J-3506 [27] NUT-FULL (3/4-10-THD)  
3. 3G-8319 [1] BIT-END (RH)  
  3G-8320 [1] BIT-END (LH)  
4. 4T-3010 [2] EDGE-CUTTING (END)  
 

#SEBP25780276
 

3K-9880: MOUNTING GP-RIPPER

3K-9880 MOUNTING GP-RIPPER
S/N 5PP1-UP
PART OF 130-3430 RIPPER AR
AN ATTACHMENT
i00365874 SEBP2578
3K9880 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1363 [4] BOLT (1-8X2.75-IN)  
2. 7M-9650 [16] WASHER (5.94-MM THK)  
3. 7F-9547 [1] PIN AS-DRAWBAR  
4. 4K-1079 [8] STUD (3/4X2.9IN OAL)  
5. 5H-1504 [8] WASHER-HARD (20X33.5X5-MM THK)  
6. 6B-6682 [8] NUT-FULL (3/4-16-THD)  
7. 3K-1516 [1] SEAL-RING  
8. 2K-0703 [1] BAR  
9. 0S-1621 [2] BOLT (1/2-13X1-IN)  
  3B-4508 [2] LOCKWASHER  
10. 3K-9750 [1] PIN  
11. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
12. 5K-8687 [2] STUD-TAPERLOCK (1 1/4X4.9IN OAL)  
  4K-0684 [2] WASHER-HARD (34X55X6-MM THK)  
13. 3K-9770 [2] NUT-FULL (1-1/4-7-THD)  
14. 2J-3507 [10] NUT-FULL (1-8-THD)  
15. 5D-3118 [4] STUD-TAPERLOCK (1-8-THD)(1-8X3.9IN OAL)  
16. 8J-0980 [1] PLATE AS-MOUNTING  
17. 4K-3613 [1] PLATE AS  
18. 3B-4647 [1] PIN-COTTER  
19. 9J-9598 [2] PIN  
20. 3B-5325 [4] PIN-COTTER  
21. 4K-4487 [1] PLATE (RH)  
22. 4K-4488 [1] PLATE (LH)  
23. 1D-4643 [2] BOLT (1-8X5.5-IN)  
24. 2K-6563 [2] PIN  
25. 4K-3927 B [10] SHIM (8.13MM THK)  
26. 1D-4609 [6] BOLT (3/4-10X3-IN)  
27. 7D-4512 [4] STUD-TAPERLOCK (1-8X4.6IN OAL)  
28. 5P-6652 [6] WASHER (20X44.5X6-MM THK)  
  B   USE AS REQUIRED
 

#SEBP25780277
 

130-3430: RIPPER AR

130-3430 RIPPER AR
S/N 5PP1-UP
AN ATTACHMENT
i00501409 SEBP2578
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  130-6135 Y [1] CYLINDER GP-RIPPER  
  130-7089 Y [1] LINES GP-RIPPER  
  3K-9880 Y [1] MOUNTING GP-RIPPER  
  8J-7521 Y [1] RIPPER GP  
   
  8M-3494 [1] PLATE-SERIAL NUMBER (RIPPER)  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780278
 

8J-7521: RIPPER GP

8J-7521 RIPPER GP
S/N 5PP1-UP
PART OF 130-3430 RIPPER AR
AN ATTACHMENT
i00425679 SEBP2578
8J7521 RIPPER GP Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-6562 [2] PIN  
2. 3B-5325 [4] PIN-COTTER  
3. 3B-8489 [7] FITTING-GREASE (1/8-27 PTF)  
4. 2K-2306 [2] LINK  
5. 9J-9598 [2] PIN  
6. 5K-2657 [1] LINK AS  
7. 8J-2189 Y [3] TOOTH GP-RIPPER  
8. 8J-7130 [1] CARRIAGE AS  
9. 2K-4615 [1] BOSS  
10. [1] BOSS  
11. 3K-5702 [2] GUSSET  
12. 5K-7748 [5] HOLDER-BIT  
13. 2K-4683 [1] PIN  
14. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
15. 8F-8804 [1] BOLT (1/2-13X5.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25780279
 

8J-2189: TOOTH GP-RIPPER

8J-2189 TOOTH GP-RIPPER
S/N 5PP1-UP
PART OF 8J-7521 RIPPER GP
Type 1
AN ATTACHMENT
i00424750 SEBP2578
8J2189 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6G SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5325 [2] PIN-COTTER  
2. 8J-2190 [1] PIN  
3. 9J-3139 [1] SHANK-RIPPER  
4. 8E-6358 [1] PIN  
  1U-2405 [1] RETAINER  
5. 6Y-0359 [1] TIP-RIPPER  
 

Information:

Disassembly and Assembly
Push Arms and Blade - Remove
D6G Track-Type Tractor Power Train
Push Arms and Blade - Install
D6G Track-Type Tractor Power Train

Caterpillar Parts SIS Catalog D6G SR :

BLADE AS-STRAIGHT
7T-4585 BLADE AS-STRAIGHT
TACHOMETER GP-ELECTRIC
125-1337 TACHOMETER GP-ELECTRIC
SUSPENSION GP-SEAT
9C-7161 SUSPENSION GP-SEAT
9C-3696 SEAT GP-SUSPENSION
SEAT GP
9C-7773 SEAT GP
SEAT BELT GP
8Y-4029 SEAT BELT GP
SEAT & SUPPORT GP
125-2115 SEAT & SUPPORT GP
ROPS GP
9G-6074 ROPS GP
BLADE GP-ANGLING
111-0578 BLADE GP-ANGLING
BLADE GP-ANGLING
9J-8528 BLADE GP-ANGLING
BLADE GP-STRAIGHT
7T-4586 BLADE GP-STRAIGHT
EDGE GP-BIT & CUTTING
7J-2778 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
7J-2783 EDGE GP-BIT & CUTTING
MOUNTING GP-RIPPER
3K-9880 MOUNTING GP-RIPPER
130-3430 RIPPER AR
RIPPER GP
8J-7521 RIPPER GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.