AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

113-7273 ADAPTER GP-POWER TAKE-OFF S/N 5AR1-UP PART OF 113-7282 CONFIGURATION AR-WITHOUT PTO, 135-7489 SPECIAL AR-WITHOUT PTO 75D


DRAWBAR, THREE POINT HITCH AND PTO
POWER TAKE-OFF GP
CONTROL GP
COUPLER GP-QUICK
DRAWBAR GP
DRIVE GP-POWER TAKE-OFF
FRAME AND BODY
DRAWBAR GP
DRAWBAR, THREE POINT HITCH AND PTO
HITCH AR
HITCH GP-3 POINT

CHALLENGER 75D CHALLENGER 5AR
 Challenger 75D Agricultural Tractor 5AR00001-UP (MACHINE) POWERED BY 3176C Engine SEBP2583 75D 5AR   (1996)

DRAWBAR, THREE POINT HITCH AND PTO

POWER TAKE-OFF GP
113-7273 ADAPTER GP-POWER TAKE-OFF
122-0539 KIT-POWER TAKE-OFF
134-6747 KIT-POWER TAKE-OFF
MOUNTING GP-POWER TAKE-OFF
113-7271 MOUNTING GP-POWER TAKE-OFF
135-7491 POWER TAKE-OFF AR
POWER TAKE-OFF GP
136-0504 POWER TAKE-OFF GP
POWER TAKE-OFF GP
147-9435 POWER TAKE-OFF GP
SHAFT GP-POWER TAKE-OFF
3W-5101 SHAFT GP-POWER TAKE-OFF
 

#SEBP25830330
 

113-7273: ADAPTER GP-POWER TAKE-OFF

113-7273 ADAPTER GP-POWER TAKE-OFF
S/N 5AR1-UP
PART OF 113-7282 CONFIGURATION AR-WITHOUT PTO, 135-7489 SPECIAL AR-WITHOUT PTO
i00478696 SEBP2583
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  101-7901 [1] ANGLE AS  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
  1D-4569 [2] BOLT (1/2-13X4.25-IN)  
  0S-1573 [1] BOLT (1/2-13X4-IN)  
  5P-2228 [1] BOLT (1/2-13X1-IN)  
  4F-8711 [1] PLUG-BUTTON (39.69MM DIA)  
  1N-5998 [1] PLUG (1 7/8-12 THD)  
  6S-8224 [4] PLUG-PROTECTION  
  6K-6307 [1] SEAL-O-RING (43.69MM ID)  
  8V-9708 [1] SPACER (14.3X25.4X35-MM THK)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP25830331
 

9U-1676: CONTROL & MOUNTING GP

9U-1676 CONTROL & MOUNTING GP
S/N 5AR1-UP
PART OF 124-6677 CAB GP, 9U-3283 HITCH AR-3 POINT
i00438652 SEBP2583
9U1676 CONTROL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7706 Y [1] CONTROL GP-ELECTRONIC (ROTARY POSITION SENSOR)  
2. 127-8378 C [1] CONTROL GP-ELECTRONIC (AG HITCH CONTROL)  
3. 3W-6763 [1] PLATE  
4. 8T-8908 [3] BOLT (1/4-20X1-IN)  
5. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 129-6466 [1] SWITCH AS-ROLLER (THROTTLE)  
7. 9X-0199 [1] BOOT-SWITCH  
8. 6V-8370 [1] NUT-HEX (3/4-32-THD)  
  2H-3922 [1] LOCKWASHER  
9. 6V-8363 [2] SCREW (10-32X0.312-IN)  
10. 8F-1434 [2] LOCKWASHER  
11. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
12. 6V-7357 M [1] BOLT (M6X1X25-MM)  
13. 6V-8187 [2] NUT (1/4-28-THD)  
14. 6V-8185 [5] NUT (1/4-20-THD)  
15. 5R-1341 [1] ROD-CONTROL  
16. 5G-9896 [2] SPACER  
17. 6L-7751 [2] ROD END  
18. 8T-9368 [1] BOLT (1/4-20X2.25-IN)  
19. 5P-2675 [1] BOLT (1/4-20X1.75-IN)  
20. 6V-7646 [2] WASHER-HARD (7.2X25X2-MM THK)  
21. 4W-3940 [1] SPRING  
22. 6D-0679 [1] KNOB  
23. 3W-6759 [1] LEVER  
24. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
25. 9U-3196 [1] HARNESS AS  
26. 8G-1119 [1] DISC  
27. 7B-1756 [1] LOCKNUT  
28. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
29. 9K-6540 [6] WASHER-SPRING (0.63X1.25X0.04-IN THK)  
30. 3S-2093 [5] STRAP-CABLE  
31. 3W-6756 [1] KNOB  
32. 4D-8123 [1] CLIP  
33. 3E-7746 [1] SWITCH AS-ROCKER (DRAFT CONTROL)  
34. 3E-7745 [1] SWITCH AS-ROCKER (HOOK UP)  
35. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
36. 3W-6760 [1] SUPPORT AS  
37. 8H-9189 [1] DOWEL  
38. 3W-6761 [1] STUD  
39. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
40. 5P-6419 [1] GROMMET  
41. 3W-6757 [1] PLATE AS  
42. 9V-7451 [1] NUT-WELD (1/4-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25830332
 

104-3055: COUPLER GP-QUICK

104-3055 COUPLER GP-QUICK
S/N 5AR1-UP
PART OF 124-4799 HITCH AR, 9U-3283 HITCH AR-3 POINT
i00472585 SEBP2583
1043055 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3463 [1] FRAME AS-COUPLER  
2. 124-6644 [2] PLATE AS  
3. 104-3465 [2] PIN AS  
4. 133-4285 [1] PIN AS  
5. 104-3467 [2] LEVER AS  
6. 104-3471 [1] HOOK AS (CATEGORY III)  
7. 104-3472 [1] HOOK AS (CATEGORY IV)  
8. 133-4287 [2] ROD AS  
9. 107-0590 [1] SPACER (19.43X24.51X19.05-MM THK)  
10. 6J-0208 [2] SPRING  
11. 3J-2801 [4] BOLT-PLOW (1-8X2.5-IN)  
12. 5P-8250 [4] WASHER (28X49X5-MM THK)  
13. 6K-3632 [4] LOCKNUT (1-8-THD)  
14. 6J-3335 [2] PIN  
15. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3B-4617 [4] PIN-COTTER  
17. 5P-8248 [5] WASHER-HARD (20X36.5X3.5-MM THK)  
18. 1A-8827 [2] PIN  
19. 1D-4615 [4] BOLT (3/4-10X5.5-IN)  
20. 0S-1626 [1] BOLT (3/4-10X1.5-IN)  
21. 7H-2069 [2] BOLT (3/4-10X1-IN)  
22. 104-3466 [2] BUSHING  
23. 1K-6870 [4] LOCKNUT (3/4-10-THD)  
24. 5P-6652 [2] WASHER (20X44.5X6-MM THK)  
 

#SEBP25830333
 

9U-1695: DRAWBAR GP-SWINGING

9U-1695 DRAWBAR GP-SWINGING
S/N 5AR1-529
PART OF 117-6153 CONFIGURATION AR-WITHOUT HITCH, 124-4799 HITCH AR
i00438802 SEBP2583
9U1695 DRAWBAR GP-SWINGING Parts scheme
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0347 [2] BOLT (5/8-11X2.25-IN)  
  3K-2889 [2] LOCKNUT (5/8-11-THD)  
2. 3F-3442 [1] DOWEL  
3. 3W-6116 [1] PIN  
4. 7B-0863 [2] LATCH-PIN  
5. 3B-2968 [4] BOLT (3/4-10X3.5-IN)  
6. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 119-6204 [1] PLATE  
8. 9U-3817 [1] PLATE-WEAR (BOT.DRAWBAR HAMMER STRAP)  
9. 125-6370 [1] DRAWBAR AS  
10. 3W-6121 [1] PIN AS  
11. 8T-9398 [1] BOLT (3/4-10X1.75-IN)  
  7X-0564 [1] WASHER-HARD (20X51X3-MM THK)  
12. 9K-9731 [1] SPACER (20.4X28.5X14.2-MM THK)  
13. 4M-4649 [2] PLATE-LOCK  
14. 4L-6454 [4] BOLT (3/8-16X1-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 106-3677 [1] PIN (DRAWBAR)  
16. 3W-7254 [1] SPACER (47X80X20-MM THK)  
 

#SEBP25830334
 

9U-1695: DRAWBAR GP-SWINGING

9U-1695 DRAWBAR GP-SWINGING
S/N 5AR530-UP
PART OF 117-6153 CONFIGURATION AR-WITHOUT HITCH, 124-4799 HITCH AR
i00597415 SEBP2583
9U1695 DRAWBAR GP-SWINGING Parts scheme
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0347 [2] BOLT (5/8-11X2.25-IN)  
  3K-2889 [2] LOCKNUT (5/8-11-THD)  
2. 3F-3442 [1] DOWEL  
3. 3W-6116 [1] PIN  
4. 150-8766 C [2] LATCH  
5. 3B-2968 [4] BOLT (3/4-10X3.5-IN)  
6. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 119-6204 [1] PLATE  
8. 9U-3817 [1] PLATE-WEAR (BOTTOM DRAWBAR HAMMER STRAP)  
9. 125-6370 [1] DRAWBAR AS  
10. 135-4729 C [1] RETAINER AS  
11. 9B-7237 C [4] BOLT (3/8-16X1.25-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 135-4730 C [1] PIN (DRAWBAR)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25830335
 

7T-3000: DRIVE GP-POWER TAKE-OFF

7T-3000 DRIVE GP-POWER TAKE-OFF
S/N 5AR1-UP; 3GX860-UP
PART OF 134-6747 KIT-POWER TAKE-OFF, 9U-8840 TRANSMISSION AR
i00422065 SEBP2583
7T3000 DRIVE GP-POWER TAKE-OFF Parts scheme
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1558 [1] BOLT (1/2-20X3.25-IN)  
2. 1P-6563 [1] WASHER-RETAINING (0.531X2.559X0.48-IN THK)  
3. 7T-3063 [1] YOKE AS  
4. 3K-0196 [1] GUARD  
5. 1J-6472 [1] RING-RETAINING  
6. 1T-0043 [1] BALL BEARING  
7. 9H-6079 [1] SEAL-LIP TYPE  
8. 0S-1594 [7] BOLT (3/8-16X1-IN)  
9. 7T-3061 [1] HOUSING-CLUTCH  
10. 8M-4435 [1] SEAL-O-RING  
11. 2M-9780 [1] SEAL-O-RING  
12. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
13. 8P-4922 [3] RING-SEAL  
14. 7T-3058 [1] RING-SEAL  
15. 0S-1590 [2] BOLT (3/8-16X2-IN)  
16. 1T-0132 [1] SEAL-O-RING  
17. 5P-8191 C [3] RING-RETAINING  
18. 7T-3062 [1] MANIFOLD-CLUTCH  
19. 7T-3067 [1] RING-SEAL  
20. 6Y-7981 [8] DISC-FRICTION  
21. 7T-3057 [1] PISTON-CLUTCH  
22. 3P-1608 [1] RING-RETAINING  
23. 3P-0337 [6] PLATE-CLUTCH  
24. 3P-0335 [1] PLATE-CLUTCH PRESSURE  
25. 4M-9592 [10] SPRING  
26. 7T-3059 [1] HUB-CLUTCH  
27. 1T-0795 [1] RING-RETAINING  
28. 5D-1921 [1] RING-RETAINING  
29. 7T-3055 [1] SHAFT AS  
30. 3S-2938 [1] BUSHING  
31. 7T-3056 [1] HUB-CLUTCH  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25830336
 

3W-5023: FRAME GP-DRAWBAR

3W-5023 FRAME GP-DRAWBAR
S/N 5AR1-UP
PART OF 117-6153 CONFIGURATION AR-WITHOUT HITCH
i00365855 SEBP2583
3W5023 FRAME GP-DRAWBAR Parts scheme
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-6125 [1] SUPPORT AS  
2. 8T-9400 C [12] BOLT (7/8-9X2.5-IN)  
3. 8C-6913 C [12] WASHER-HARD (24X41.5X4-MM THK)  
4. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
5. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6K-1510 [2] STOP  
7. 125-5542 [1] PLATE-WEAR  
8. 4L-8183 [2] SPACER (0.656X1.125X0.38-IN THK)  
9. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
10. 8T-9393 [2] BOLT (5/8-11X1.5-IN)  
11. 6S-8224 [4] PLUG-PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25830337
 

124-4799: HITCH AR

124-4799 HITCH AR
S/N 5AR1-UP
i00517225 SEBP2583
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  124-6677 Y [1] CAB GP  
  104-3055 Y [1] COUPLER GP-QUICK  
  9T-9517 Y [2] CYLINDER GP-LIFT (HITCH)  
  9U-1695 Y [1] DRAWBAR GP-SWINGING  
  133-6298 Y [1] GUARD GP-REAR  
  113-7308 Y [1] HITCH GP-3 POINT  
  113-7309 Y [1] LINES GP-HYDRAULIC  
  9U-1678 Y [1] LINES GP-HYDRAULIC  
  108-2365 Y [1] VALVE GP-BANK  
  7I-3410 Y [1] WIRING GP-3 POINT HITCH  
   
  8C-4977 [1] FILM-WARNING (HITCH CONT IN HOOK-UP MODE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25830338
 

9U-3283: HITCH AR-3 POINT

9U-3283 HITCH AR-3 POINT
S/N 5AR1-UP
FIELD CONVERSION
i00440239 SEBP2583
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9U-1676 Y [1] CONTROL & MOUNTING GP  
  104-3055 Y [1] COUPLER GP-QUICK  
  9T-9517 Y [2] CYLINDER GP-LIFT (HITCH)  
  113-7308 Y [1] HITCH GP-3 POINT  
  113-7309 Y [1] LINES GP-HYDRAULIC  
  9U-3371 Y [1] VALVE & LINES GP  
  7I-3410 Y [1] WIRING GP-3 POINT HITCH  
   
  8C-4977 [1] FILM-WARNING (HITCH CONT IN HOOK-UP MODE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25830339
 

113-7308: HITCH GP-3 POINT

113-7308 HITCH GP-3 POINT
S/N 5AR1-UP
PART OF 124-4799 HITCH AR, 9U-3283 HITCH AR-3 POINT
i00478827 SEBP2583
1137308 HITCH GP-3 POINT Parts scheme
  For full view, you need register

Parts for your 75D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7235 [1] SUPPORT AS  
  7T-1099 [2] LINK  
2. 5P-2228 [6] BOLT (1/2-13X1-IN)  
3. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 5G-9977 [3] BAR  
5. 102-4634 [1] SHAFT AS-ROCKER ARM  
6. 6K-7983 [2] BUSHING  
7. 8F-9836 [1] BOSS (3/8-16-THD)  
8. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
9. 6L-1698 [2] SPACER (13.87X21.34X12.7-MM THK)  
10. 4E-5112 [2] PIN AS  
11. 4E-7872 Y [1] LINK GP (PITCH CONTROL)  
12. 7X-0341 [2] BOLT (1/2-13X7-IN)  
13. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
14. 1B-4287 [2] WASHER (14.3X58.7X5-MM THK)  
15. 4E-7866 Y [2] LINK GP (LIFT)  
16. 7X-0346 [8] BOLT (5/8-11X2-IN)  
17. 8T-4122 [28] WASHER-HARD (17X32X3.5-MM THK)  
18. 3W-7265 [2] BLOCK  
19. 3W-7218 [4] PLATE  
20. 8D-7424 [12] SPACER (48X81X6-MM THK)  
21. 8T-9393 [16] BOLT (5/8-11X1.5-IN)  
22. 3W-7266 [2] BLOCK  
23. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
24. 8C-6913 [16] WASHER-HARD (24X41.5X4-MM THK)  
25. 8C-6362 [4] BOLT (5/8-11X2.75-IN)  
26. 3W-7897 B [8] SPACER  
27. 8T-9400 [16] BOLT (7/8-9X2.5-IN)  
28. 4E-5114 [2] PIN  
29. 3W-7212 [2] BLOCK  
30. 3W-7255 [4] SPACER (47X80X10-MM THK)  
31. 3B-8491 [4] FITTING-GREASE (1/8-27 PTF)  
32. 4E-5110 [2] PIN AS  
33. 3W-7264 [2] PIN  
34. 7X-0537 [4] WASHER-HARD (40.5X67X6-MM THK)  
35. 3B-5324 [2] PIN-COTTER  
36. 8T-9383 [2] BOLT (1/2-13X0.75-IN)  
37. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
38. 5G-9975 [1] PIN  
39. 188-2757 [2] LINK AS-LOWER  
    (EACH INCLUDES)
40. 186-0974 [1] BALL JOINT AS  
41. 186-0975 [1] BALL JOINT AS  
42. 4L-8183 [2] SPACER (0.656X1.125X0.38-IN THK)  
43. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
44. 6K-1510 [2] STOP  
45. 7X-0515 [4] WASHER-HARD (17X35X5-MM THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
47. 125-5543 [1] PLATE-WEAR (DRAWBAR SUPPORT W/HITCH)  
48. 7X-0353 [2] BOLT (5/8-11X4.25-IN)  
49. 7X-0448 [2] NUT (5/8-11-THD)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 75D :

113-7275 ADAPTER GP-3 POINT HITCH
VALVE GP-SOLENOID
100-3915 VALVE GP-SOLENOID
VALVE GP-RELIEF
9T-1819 VALVE GP-RELIEF
VALVE GP-RELIEF
8E-7037 VALVE GP-RELIEF
VALVE GP-RELIEF
103-5460 VALVE GP-RELIEF
VALVE GP-PUMP CONTROL
126-2754 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
126-2712 VALVE GP-PUMP CONTROL
VALVE GP-CONTROL
9T-1799 VALVE GP-CONTROL
CONTROL & MOUNTING GP
9U-1676 CONTROL & MOUNTING GP
COUPLER GP-QUICK
104-3055 COUPLER GP-QUICK
DRAWBAR GP-SWINGING
9U-1695 DRAWBAR GP-SWINGING
DRAWBAR GP-SWINGING
9U-1695 DRAWBAR GP-SWINGING
DRIVE GP-POWER TAKE-OFF
7T-3000 DRIVE GP-POWER TAKE-OFF
FRAME GP-DRAWBAR
3W-5023 FRAME GP-DRAWBAR
124-4799 HITCH AR
9U-3283 HITCH AR-3 POINT

Truck sale:

Caterpillar 75D, Agriculture
33,000 
Caterpillar 75D, Agriculture
- tractors
MICHIGAN CAT
CATERPILLAR 75D 1996
 
CATERPILLAR 75D 1996
- AG TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
 
USD $32,500 
1997 CAT 75D

Central Illinois Ag
Atlanta, Illinois
1997 CAT 75D
USD $37,949 
1997 CAT 75D

Finning Canada
Edmonton, Alberta, Canada T5P4C3
CATERPILLAR 75D 1997
$38,227 USD 
CATERPILLAR 75D 1997
- AG TRACTORS
FINNING CANADA (SASKATCHEWAN)
2360 Pasqua St North Box 707 - Regina -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.