AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

126-2712 VALVE GP-PUMP CONTROL S/N 4GR1-99999 PART OF 126-1184 PUMP GP-PISTON 85D CHALLENGER


HYDRAULIC SYSTEM
PUMP GP
DRAWBAR, THREE POINT HITCH AND PTO
HITCH GP-3 POINT
POWER TAKE-OFF GP
DRAWBAR GP
DRIVE GP-POWER TAKE-OFF
FRAME AND BODY
DRAWBAR GP
DRAWBAR, THREE POINT HITCH AND PTO
HITCH GP-3 POINT
POWER TAKE-OFF GP

CHALLENGER 85D CHALLENGER 4GR
 Challenger 85D Agricultural Tractor 4GR00001-UP (MACHINE) POWERED BY 3196 Engine SEBP2584 85D 4GR   (1996)

HYDRAULIC SYSTEM

PUMP GP
ROTATING GP-PUMP
6E-6569 ROTATING GP-PUMP
ROTATING GP-PUMP
9T-2031 ROTATING GP-PUMP
VALVE GP-PUMP CONTROL
126-2712 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
126-2754 VALVE GP-PUMP CONTROL
 

#SEBP25840300
 

126-2712: VALVE GP-PUMP CONTROL

126-2712 VALVE GP-PUMP CONTROL
S/N 4GR1-99999
PART OF 126-1184 PUMP GP-PISTON
i00514081 SEBP2584
1262712 VALVE GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4246 [1] SPRING-MARGIN  
2. 9S-4191 [1] PLUG (9/16-18-THD)  
3. 3J-1907 [3] SEAL-O-RING  
4. 6E-4241 [1] SPOOL-MARGIN  
5. 9T-2186 [2] PLUG  
6. 6E-4239 [1] SPOOL-CUTOFF  
7. 6E-4230 [2] GUIDE-SPRING  
8. 6E-4228 [1] SPRING  
9. 6E-6140 [1] PLUG-COMPENSATOR  
  033-6036 [1] SEAL-O-RING  
10. 6E-4318 [1] PIN-SPRING STOP  
11. 6E-6141 [2] LOCKNUT-SEALING  
12. 9X-8914 M [2] SETSCREW-SOCKET (M8X1.25X45-MM)  
13. 6E-6142 [1] PLUG-MARGIN  
  033-6027 [1] SEAL-O-RING  
14. 6E-4242 [2] GUIDE-SPRING  
15. 6E-4229 [1] BODY-COMPENSATOR  
  M   METRIC PART
 

#SEBP25840301
 

126-2754: VALVE GP-PUMP CONTROL

126-2754 VALVE GP-PUMP CONTROL
S/N 4GR1-99999
PART OF 126-0980 PUMP GP-PISTON
i00514092 SEBP2584
1262754 VALVE GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3816 [1] SPOOL  
2. 9T-3815 [1] SEAT  
3. 9T-3814 [1] SPRING  
4. 5L-4758 [1] SEAL-O-RING  
5. 9T-3813 [1] PLUG  
6. 9S-8002 [1] PLUG (7/16-20-THD)  
7. 3J-7354 [1] SEAL-O-RING  
8. 9T-7062 [1] BODY  
9. 3J-6021 [3] PLUG  
10. 9S-8003 [1] PLUG (1/2-20-THD)  
11. 7L-8316 [1] SETSCREW-SOCKET (10-32X2.54-IN)  
12. 9T-3809 [1] SPOOL  
13. 9T-3810 [1] SEAT  
14. 9T-6858 [1] SPRING  
15. 9T-3812 [1] SEAT  
16. 8T-7931 [1] SETSCREW (1/2-20-THD)  
17. 1J-9671 [1] SEAL-O-RING  
18. 6E-0231 [1] SEAT-CHECK VALVE  
19. 2S-9600 [1] DOWEL  
20. 3E-4354 [1] BALL  
 

#SEBP25840302
 

113-7275: ADAPTER GP-3 POINT HITCH

113-7275 ADAPTER GP-3 POINT HITCH
S/N 4GR1-99999
PART OF 117-6153 CONFIGURATION AR-WITHOUT HITCH, 124-6650 HITCH READY AR
i00478700 SEBP2584
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9X-2614 [1] CONNECTOR  
  6V-9850 [1] ELBOW  
  9U-2348 I [1] HOSE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [3] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP25840303
 

113-7273: ADAPTER GP-POWER TAKE-OFF

113-7273 ADAPTER GP-POWER TAKE-OFF
S/N 4GR1-99999
PART OF 113-7291 CONFIGURATION AR-WITHOUT PTO, 135-7490 SPECIAL AR-WITHOUT PTO
i00478696 SEBP2584
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  101-7901 [1] ANGLE AS  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
  1D-4569 [2] BOLT (1/2-13X4.25-IN)  
  0S-1573 [1] BOLT (1/2-13X4-IN)  
  5P-2228 [1] BOLT (1/2-13X1-IN)  
  4F-8711 [1] PLUG-BUTTON (39.69MM DIA)  
  1N-5998 [1] PLUG (1 7/8-12 THD)  
  6S-8224 [4] PLUG-PROTECTION  
  6K-6307 [1] SEAL-O-RING (43.69MM ID)  
  8V-9708 [1] SPACER (14.3X25.4X35-MM THK)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP25840304
 

9U-1695: DRAWBAR GP-SWINGING

9U-1695 DRAWBAR GP-SWINGING
S/N 4GR1-99999
PART OF 117-6153 CONFIGURATION AR-WITHOUT HITCH
i00438802 SEBP2584
9U1695 DRAWBAR GP-SWINGING Parts scheme
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0347 [2] BOLT (5/8-11X2.25-IN)  
  3K-2889 [2] LOCKNUT (5/8-11-THD)  
2. 3F-3442 [1] DOWEL  
3. 3W-6116 [1] PIN  
4. 7B-0863 [2] LATCH-PIN  
5. 3B-2968 [4] BOLT (3/4-10X3.5-IN)  
6. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 119-6204 [1] PLATE  
8. 9U-3817 [1] PLATE-WEAR (BOT.DRAWBAR HAMMER STRAP)  
9. 125-6370 [1] DRAWBAR AS  
10. 3W-6121 [1] PIN AS  
11. 8T-9398 [1] BOLT (3/4-10X1.75-IN)  
  7X-0564 [1] WASHER-HARD (20X51X3-MM THK)  
12. 9K-9731 [1] SPACER (20.4X28.5X14.2-MM THK)  
13. 4M-4649 [2] PLATE-LOCK  
14. 4L-6454 [4] BOLT (3/8-16X1-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 106-3677 [1] PIN (DRAWBAR)  
16. 3W-7254 [1] SPACER (47X80X20-MM THK)  
 

#SEBP25840305
 

9U-1695: DRAWBAR GP-SWINGING

9U-1695 DRAWBAR GP-SWINGING
S/N 4GR817-99999
PART OF 117-6153 CONFIGURATION AR-WITHOUT HITCH
i00597415 SEBP2584
9U1695 DRAWBAR GP-SWINGING Parts scheme
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0347 [2] BOLT (5/8-11X2.25-IN)  
  3K-2889 [2] LOCKNUT (5/8-11-THD)  
2. 3F-3442 [1] DOWEL  
3. 3W-6116 [1] PIN  
4. 150-8766 C [2] LATCH  
5. 3B-2968 [4] BOLT (3/4-10X3.5-IN)  
6. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 119-6204 [1] PLATE  
8. 9U-3817 [1] PLATE-WEAR (BOTTOM DRAWBAR HAMMER STRAP)  
9. 125-6370 [1] DRAWBAR AS  
10. 135-4729 C [1] RETAINER AS  
11. 9B-7237 C [4] BOLT (3/8-16X1.25-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 135-4730 C [1] PIN (DRAWBAR)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25840306
 

7T-3000: DRIVE GP-POWER TAKE-OFF

7T-3000 DRIVE GP-POWER TAKE-OFF
S/N 4GR1-99999
PART OF 134-6747 KIT-POWER TAKE-OFF
i00422065 SEBP2584
7T3000 DRIVE GP-POWER TAKE-OFF Parts scheme
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1558 [1] BOLT (1/2-20X3.25-IN)  
2. 1P-6563 [1] WASHER-RETAINING (0.531X2.559X0.48-IN THK)  
3. 7T-3063 [1] YOKE AS  
4. 3K-0196 [1] GUARD  
5. 1J-6472 [1] RING-RETAINING  
6. 1T-0043 [1] BALL BEARING  
7. 9H-6079 [1] SEAL-LIP TYPE  
8. 0S-1594 [7] BOLT (3/8-16X1-IN)  
9. 7T-3061 [1] HOUSING-CLUTCH  
10. 8M-4435 [1] SEAL-O-RING  
11. 2M-9780 [1] SEAL-O-RING  
12. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
13. 8P-4922 [3] RING-SEAL  
14. 7T-3058 [1] RING-SEAL  
15. 0S-1590 [2] BOLT (3/8-16X2-IN)  
16. 1T-0132 [1] SEAL-O-RING  
17. 5P-8191 C [3] RING-RETAINING  
18. 7T-3062 [1] MANIFOLD-CLUTCH  
19. 7T-3067 [1] RING-SEAL  
20. 6Y-7981 [8] DISC-FRICTION  
21. 7T-3057 [1] PISTON-CLUTCH  
22. 3P-1608 [1] RING-RETAINING  
23. 3P-0337 [6] PLATE-CLUTCH  
24. 3P-0335 [1] PLATE-CLUTCH PRESSURE  
25. 4M-9592 [10] SPRING  
26. 7T-3059 [1] HUB-CLUTCH  
27. 1T-0795 [1] RING-RETAINING  
28. 5D-1921 [1] RING-RETAINING  
29. 7T-3055 [1] SHAFT AS  
30. 3S-2938 [1] BUSHING  
31. 7T-3056 [1] HUB-CLUTCH  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25840307
 

3W-5023: FRAME GP-DRAWBAR

3W-5023 FRAME GP-DRAWBAR
S/N 4GR1-99999
PART OF 117-6153 CONFIGURATION AR-WITHOUT HITCH
i00365855 SEBP2584
3W5023 FRAME GP-DRAWBAR Parts scheme
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-6125 [1] SUPPORT AS  
2. 8T-9400 C [12] BOLT (7/8-9X2.5-IN)  
3. 8C-6913 C [12] WASHER-HARD (24X41.5X4-MM THK)  
4. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
5. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6K-1510 [2] STOP  
7. 125-5542 [1] PLATE-WEAR  
8. 4L-8183 [2] SPACER (0.656X1.125X0.38-IN THK)  
9. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
10. 8T-9393 [2] BOLT (5/8-11X1.5-IN)  
11. 6S-8224 [4] PLUG-PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25840308
 

124-6650: HITCH READY AR

124-6650 HITCH READY AR
S/N 4GR1-99999
i00518112 SEBP2584
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  113-7275 Y [1] ADAPTER GP-3 POINT HITCH  
  124-6666 Y [1] CAB GP  
  132-4652 Y [1] LINES GP-HYDRAULIC  
  108-2363 Y [1] VALVE GP-BANK  
   
  8T-8915 [2] BOLT (3/8-16X3.25-IN)  
  8T-9400 [1] BOLT (7/8-9X2.5-IN)  
  4F-8711 [1] PLUG-BUTTON (39.69MM DIA)  
  6S-8224 [8] PLUG-PROTECTION  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  8C-6913 [8] WASHER-HARD (24X41.5X4-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25840309
 

122-0539: KIT-POWER TAKE-OFF

122-0539 KIT-POWER TAKE-OFF
S/N 4GR1-99999
FIELD CONVERSION
PART OF 134-6747 KIT-POWER TAKE-OFF
FOR USE WITH TRACTORS EQUIPPED WITH POWER TAKE-OFF TRANSMISSIONS
i00488198 SEBP2584
  For full view, you need register

Parts for your 85D CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  113-7270 Y [1] CONTROL GP-POWER TAKE-OFF  
  113-7272 Y [1] LINES GP-POWER TAKE-OFF  
  113-7271 Y [1] MOUNTING GP-POWER TAKE-OFF  
  136-0504 Y [1] POWER TAKE-OFF GP  
  3W-5101 Y [1] SHAFT GP-POWER TAKE-OFF  
   
  7X-0293 [2] BOLT (3/8-16X4.75-IN)  
  3K-0360 [1] SEAL-O-RING (16.36MM ID)  
  9S-4185 [1] PLUG (3/4-16-THD)(3/4-16 THD)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications
Hydraulic Pump
CHALLENGER 65D, CHALLENGER 75D, AND CHALLENGER 85D AGRICULTU
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Disassembly and Assembly
Implement Pump
CHALLENGER 65D , CHALLENGER 75D & CHALLENGER 85D AGRICUILTUR
Service Magazine
New Tooling Simplifies Steering Pump Neutral Adjustment {5070,0738}
1997/02/24
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
The Swashplate Stop for the Piston Pump is now Retained with a Dowel Pin {5070}
2000/08/14
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 85D :

VALVE GP-CONTROL
105-1873 VALVE GP-CONTROL
VALVE GP-BREAKER RELIEF
4T-4273 VALVE GP-BREAKER RELIEF
VALVE GP-BANK
112-4544 VALVE GP-BANK
VALVE GP-BANK
108-2363 VALVE GP-BANK
TANK GP-HYDRAULIC & FUEL
133-7179 TANK GP-HYDRAULIC & FUEL
ROTATING GP-PUMP
9T-2031 ROTATING GP-PUMP
ROTATING GP-PUMP
6E-6569 ROTATING GP-PUMP
PUMP GP-PISTON
127-4589 PUMP GP-PISTON
VALVE GP-PUMP CONTROL
126-2754 VALVE GP-PUMP CONTROL
113-7275 ADAPTER GP-3 POINT HITCH
113-7273 ADAPTER GP-POWER TAKE-OFF
DRAWBAR GP-SWINGING
9U-1695 DRAWBAR GP-SWINGING
DRAWBAR GP-SWINGING
9U-1695 DRAWBAR GP-SWINGING
DRIVE GP-POWER TAKE-OFF
7T-3000 DRIVE GP-POWER TAKE-OFF
FRAME GP-DRAWBAR
3W-5023 FRAME GP-DRAWBAR
124-6650 HITCH READY AR

Truck sale:

Caterpillar 85D, Agriculture
33,000 
Caterpillar 85D, Agriculture
- tractors
MICHIGAN CAT
Caterpillar 85D, Agriculture
74,000 
Caterpillar 85D, Agriculture
- tractors
ZIEGLER AG EQUIPMENT
CATERPILLAR 85D 1996
 
CATERPILLAR 85D 1996
- AG TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR 85D 1997
$38,227 USD 
CATERPILLAR 85D 1997
- AG TRACTORS
FINNING CANADA (SASKATCHEWAN)
2360 Pasqua St North Box 707 - Regina -
CATERPILLAR 85D 1997
$38,227 USD 
CATERPILLAR 85D 1997
- AG TRACTORS
FINNING CANADA (SASKATCHEWAN)
2360 Pasqua St North Box 707 - Regina -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.