105-1695 CONTROL GP-FUEL INJECTION S/N 98Z16500-UP PART OF 131-3804 ENGINE AR 322B L EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
2.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	106-0185	[1]	BRACKET AS
4.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
5.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
6.	4D-8123	[2]	CLIP
7.	106-0070	[1]	SPRING
8.	119-0615	[1]	LEVER AS
9.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
10.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
11.	5C-7261 M	[1]	NUT (M8X1.25-THD)
12.	106-0188	[1]	COVER AS
13.	106-0126	[1]	MOTOR AS-GOVERNOR
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
13A.	157-3160	[1]	JOINT
13B.	Z	[1]	CABLE AS
14.	8T-4197 M	[2]	BOLT (M8X1.25X40-MM)

	319-4243 AFY	[1]	CABLE GP-GOVERNOR CONTROL
			(REFER TO REHS3989 FIELD REPAIR OF GOVERNOR MOTOR CABLES)
	A		NOT PART OF THIS GROUP
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

#SEBP25850102

132-7806: CONTROL GP-GOVERNOR

CONTROL GP-GOVERNOR

132-7806 CONTROL GP-GOVERNOR
S/N 1YS380-UP
PART OF 134-2245 CHASSIS AR

i00498271 SEBP2585

1327806 CONTROL GP-GOVERNOR Parts scheme

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
2.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	106-0185	[1]	BRACKET AS
4.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
5.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
6.	4D-8123	[2]	CLIP
7.	106-0070	[1]	SPRING
8.	132-7802	[1]	LEVER AS
9.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
10.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
11.	5C-7261 M	[1]	NUT (M8X1.25-THD)
12.	106-0188	[1]	COVER AS
13.	106-0126	[1]	MOTOR AS-GOVERNOR
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
14.	099-3649 M	[2]	BOLT (M8X1.25X40-MM)

	319-4243 AFY	[1]	CABLE GP-GOVERNOR CONTROL
			(REFER TO REHS3989 FIELD REPAIR OF GOVERNOR MOTOR CABLES)
	A		NOT PART OF THIS GROUP
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25850103

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 98Z16500-UP
PART OF 130-7323 GOVERNOR GP-UNIT INJECTOR

i00122334 SEBP2585

7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-5612	[1]	HOUSING AS-FRONT
1A.	101-0768	[1]	GEAR AS-DRIVE (44-TEETH)
	8T-0114	[1]	PIN-SPRING
1B.	7S-6798	[1]	SEAL-LIP TYPE
1C.	7S-5005	[2]	DOWEL
1D.	9Y-3107 M	[1]	BOLT (M8X1.25X45-MM)
2.		[1]	SPRING-TORSION
3.	4P-9490	[1]	SHAFT AS-SHUTOFF
3A.	9X-8902 M	[4]	BOLT-SOCKET HEAD (M3X0.5X8-MM)
3B.	4P-9492	[1]	BRACKET-SHAFT
3C.	4P-9493	[1]	LEVER-SHUTOFF (SOLENOID)
3D.	4P-9494	[1]	SPRING-SHUTOFF
3E.	105-0585	[1]	LEVER-SHUTOFF (OUTPUT)
4.	6V-5213 M	[2]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
5.	7W-5615	[1]	SLEEVE AS-PUMP
	1W-0565	[1]	RING-RETAINING
6.	4D-9986	[2]	SEAL-O-RING
7.	4P-3953	[1]	PISTON AS
8.	7E-0156	[1]	FITTING-INLET
9.	4P-4224	[1]	COVER-TRANSFER PUMP
10.	7C-5294	[1]	SPRING
11.	8C-6364 M	[3]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
12.	7E-9898	[1]	CONNECTOR
13.	3J-1907	[2]	SEAL-O-RING
14.	7W-7383	[2]	VALVE AS-CHECK
15.	7E-3943	[1]	LEVER-CONTROL
16.	9Y-9846 M	[1]	SCREW-LOCATOR
17.	6L-8598	[2]	RING-RETAINING
18.	4P-3538	[1]	SHAFT-THROTTLE
19.	7E-3944	[1]	SLEEVE
	M		METRIC PART

#SEBP25850104

7W-4812: FASTENER GP-FUEL INJ PUMP

FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 98Z16500-UP
PART OF 115-4177 GOVERNOR GP-UNIT INJECTOR

i00122408 SEBP2585

7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-3872 J	[1]	SLEEVE
2.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
3.	6V-5218 M	[3]	BOLT (M8X1.25X35-MM)
4.	9Y-5295	[1]	TUBE
5.	6F-6673	[1]	SEAL-O-RING
6.	7C-3839	[1]	CLIP-SPRING
7.	7E-0844	[1]	SEAL
8.	1T-1068	[1]	SEAL-O-RING (FUEL INJECTION PUMP)
	J		INSTALL SLEEVE IN FRONT HOUSING
	M		METRIC PART

#SEBP25850105

223-3095: GAUGE GP-SIGHT

GAUGE GP-SIGHT

223-3095 GAUGE GP-SIGHT -FUEL LEVEL
S/N 1YS1-UP
PART OF 117-4272 TANK GP-FUEL

i02293231 SEBP2585

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6F-4855	[4]	SEAL-O-RING
2.	236-3259 M	[2]	BOLT-SPECIAL
3.	237-8526	[1]	TUBE
4.	095-1519	[4]	SEAL-O-RING

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	M		METRIC PART

#SEBP25850106

115-3576: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

115-3576 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16500-UP
PART OF 115-4177 GOVERNOR GP-UNIT INJECTOR

i00492139 SEBP2585

1153576 GOVERNOR GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7323 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	128-4980	[1]	CAM-TORQUE
3.	7E-9749	[1]	SPRING GP-GOVERNOR
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
6.	4P-5745	[1]	CONTROL AS-FUEL RATIO
	6I-1564	[1]	DIAPHRAGM
	7C-5599	[1]	WASHER
	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
	8T-5447	[1]	RING-RETAINING
	Y		SEPARATE ILLUSTRATION

#SEBP25850107

115-4177: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

115-4177 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16500-UP
PART OF 131-3804 ENGINE AR

i00492663 SEBP2585

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7W-4812 Y	[1]	FASTENER GP-FUEL INJ PUMP
115-3576 Y	[1]	GOVERNOR GP-UNIT INJECTOR
7W-8434 Y	[1]	LINES GP-GOVERNOR OIL
Y		SEPARATE ILLUSTRATION

#SEBP25850108

130-7323: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

130-7323 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16500-UP
PART OF 115-3576 GOVERNOR GP-UNIT INJECTOR

i00195729 SEBP2585

1307323 GOVERNOR GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1460	[1]	RING-RETAINING
2.	108-1612	[1]	CLEVIS
3.	6D-9953	[1]	PIN-SPRING
4.	7C-8854	[1]	PIN-CLEVIS
5.	115-2553	[1]	VALVE-GOVERNOR SERVO
6.	8C-3312	[1]	RING-RETAINING
7.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
8.	5P-9757	[1]	SEAL-O-RING
9.	108-1613	[1]	PISTON-SERVO
10.	125-8158	[1]	SLEEVE-RACK CONTROL
11.	9Y-1837	[1]	SPRING
12.	8T-7060	[1]	RING-RETAINING
13.	117-9098	[1]	SLEEVE-LIMITING
14.	7N-2171	[1]	RING-RETAINING
15.	114-1803	[1]	LEVER AS
15A.	Z	[1]	PIN
15B.	Z	[2]	SWIVEL
16.	7W-5594	[1]	SHAFT AS-PIVOT
16A.	Z	[1]	PIN
17.	7E-3216	[1]	BLOCK AS-BEARING
17A.	6F-5933	[2]	BEARING AS-NEEDLE
18.	7E-3217	[1]	LEVER AS
18A.	Z	[1]	SWIVEL
19.	4P-8948	[1]	SEAT AS-SPRING
19A.	Z	[1]	INSERT
20.	7C-3776	[1]	PISTON AS
20A.	4N-6407	[1]	SPOOL-DASHPOT
20B.	4N-6406	[1]	RING-SPACER
20C.	4N-6404	[1]	RING-RETAINING
21.	7C-5480	[1]	SPRING-TORSION
22.	7C-8640	[1]	SPRING-CAM
23.	123-6433	[1]	ARBOR AS-TORQUE CAM
24.	5M-2057	[1]	SEAL-O-RING
25.	7W-5591	[1]	SEAT-GOVERNOR SPRING
26.	7C-5883 B	[7]	SHIM (0.25-MM THK)
27.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
28.	4P-4000	[1]	SPRING-LEVER
29.	8C-8546 M	[9]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
30.	3P-3547	[1]	RING-RETAINING
31.	4P-5743	[1]	LEVER AS-LIMIT
32.	4P-3537	[1]	RING-TOLERANCE
33.	4P-3539	[1]	LEVER-THROTTLE
34.	8T-8895 M	[2]	SETSCREW-SOCKET (M4X0.7X16-MM)
35.	4W-6630	[1]	LEVER
36.	115-1192	[1]	SEAL-GOVERNOR HOUSING
37.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
38.	7W-4313	[1]	WASHER (5X11X1.5-MM THK)
39.	130-7322	[1]	HOUSING AS
40.	2S-4078	[1]	SEAL-O-RING
41.	5C-8312 M	[1]	NUT (M4X0.7-THD)
42.	8T-6702 M	[1]	SETSCREW-SOCKET (M5X0.8X20-MM)
43.	6V-8189	[1]	NUT (5/16-18-THD)
44.	128-4794	[1]	PLUG
45.	7L-3386	[1]	SEAL-O-RING
46.	7C-5884	[1]	COVER-OIL SUMP
47.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
48.	6V-5683 M	[1]	BOLT (M6X1X16-MM)
49.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
50.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
51.	7C-4483	[1]	SCREEN AS (OIL INLET)(UNIT INJECTOR)
52.	6V-5100	[1]	SEAL-O-RING
53.	4P-4231	[1]	COVER-REAR
54.	5C-2874 M	[2]	NUT (M5X0.8-THD)
55.	4W-6010	[1]	CLAMP
56.	8T-0269 M	[3]	BOLT-SOCKET HEAD (M6X1X20-MM)
57.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
58.	7C-5150	[1]	PIN
59.	4P-0737	[1]	SHAFT-RISER
60.	7C-5148	[1]	CARRIER-FLYWEIGHT
61.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
62.	2S-7316	[2]	DOWEL
63.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
64.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
65.	7C-5541	[2]	PLATE
66.	7W-8993	[2]	WEIGHT
67.	8C-5061	[1]	RING-RETAINING
68.	7C-2743	[2]	RACE
69.	7W-5561	[1]	BEARING-THRUST
70.	7W-1440 B	[8]	SHIM (0.12-MM THK)
71.	4P-8947	[1]	RISER
72.	109-4587	[1]	RING-TOLERANCE
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

#SEBP25850109

143-4915: KIT-FUEL SYSTEM GASKET

KIT-FUEL SYSTEM GASKET

143-4915 KIT-FUEL SYSTEM GASKET
S/N 1YS1-UP
KIT CONTAINS THE GASKET, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL. ENGINE MOUNTED FUEL SYSTEM COMPONENTS. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED
FIELD INSTALLATION

i06897958 SEBP2585

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-0436	[1]	GASKET (FUEL PRIMING PUMP)
7E-0844	[1]	SEAL
1H-8171	[1]	SEAL-O-RING
1J-9671	[1]	SEAL-O-RING
3J-1907	[17]	SEAL-O-RING
1T-1068	[1]	SEAL-O-RING
3J-7354	[3]	SEAL-O-RING
4J-5477	[3]	SEAL-O-RING
4K-1388	[1]	SEAL-O-RING
5F-7054	[1]	SEAL-O-RING
5P-7813	[1]	SEAL-O-RING
5P-7814	[2]	SEAL-O-RING
6F-6673	[1]	SEAL-O-RING
6V-4589	[1]	SEAL-O-RING
6V-8397	[11]	SEAL-O-RING
6V-9027	[2]	SEAL-O-RING
114-8718	[6]	SEAL-O-RING
125-8274	[6]	SEAL-O-RING
237-7623	[1]	SEAL-O-RING


		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED