183-2824 PUMP GP-FUEL PRIMING S/N 98Z16500-UP PART OF 129-3230 PUMP GP-FUEL PRIMING 322B L EXCAVATOR

183-2824: PUMP GP-FUEL PRIMING

183-2824 PUMP GP-FUEL PRIMING
S/N 98Z16500-UP
PART OF 129-3230 PUMP GP-FUEL PRIMING

Parts for your 322B L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	9Y-8389	[1]	GASKET (FUEL PRIMING PUMP)
2.	183-2823	[1]	PUMP AS-FUEL PRIMING
3.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
4.	8T-7547 M	[1]	BOLT (M8X1.25X30-MM)
5.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
6.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

127-2308: SEPARATOR GP-WATER

SEPARATOR GP-WATER

127-2308 SEPARATOR GP-WATER
S/N 1YS1-UP
PART OF 117-4340, 139-9390 LINES GP-FUEL
FOR USE WITH APPLICATIONS THAT REQUIRE A PRIMARY 150 MICRON SERVICEABLE FUEL FILTER, AND A WATER SEPERATOR THAT HAS A PLASTIC BOWL WITH A DRAIN
ALSO AN ATTACHMENT

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3K-8460	[2]	PLUG (1/2-20-THD)
2.	117-4089	[1]	ELEMENT-WATER SEPARATOR (WATER SEPARATOR)
3.	118-1461	[1]	BASE AS
4.	118-8118	[1]	RING-RETAINING
5.	118-8119	[1]	NUT
6.	5P-7814	[2]	SEAL-O-RING
7.	112-9401	[1]	BOWL AS-WATER COLLECTION
	128-8614	[1]	KIT-SEAL (WATER SEPARATOR)(WATER SEPARATOR)

			AVAILABLE REPAIR KIT(S):
	121-4480	[1]	KIT-WATER BASE (WATER SEPARATOR)(SEPARATOR)
			(INCLUDES PLUGS, SEALS, RETAINING RING, & CAPS)

123-2381: SUPPORT GP-GOVERNOR CONTROL

SUPPORT GP-GOVERNOR CONTROL

123-2381 SUPPORT GP-GOVERNOR CONTROL
S/N 98Z16500-UP
PART OF 131-3804 ENGINE AR

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-0614	[1]	BRACKET AS
2.	319-4253	[1]	SUPPORT AS
3.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
4.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
5.	6V-9804 M	[2]	BOLT (M8X1.25X75-MM)
6.	8T-6912 M	[2]	BOLT (M8X1.25X50-MM)
7.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

117-4271: TANK & MTG GP-FUEL

TANK & MTG GP-FUEL

117-4271 TANK & MTG GP-FUEL
S/N 1YS1-UP
PART OF 134-2245 CHASSIS AR

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-4272 Y	[1]	TANK GP-FUEL
2.	8T-4140 M	[4]	BOLT (M16X2X60-MM)
3.	6I-6123	[4]	SPACER (17X28X25-MM THK)
4.	5P-8502	[1]	PADLOCK GP
	5P-8500 A	[1]	KEY
	8Y-6364 A	[1]	SLEEVE
	A		NOT PART OF THIS GROUP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

117-4272: TANK GP-FUEL

TANK GP-FUEL

117-4272 TANK GP-FUEL
S/N 1YS1-UP
PART OF 117-4271 TANK & MTG GP-FUEL

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
2.	349-7059 J	[1]	CAP AS-FUEL (LOCKABLE, VENTED)
	7D-7111	[1]	SEAL-O-RING
	350-7735		KIT-CAP FILTER (FUEL TANK)
			(INCLUDES BREATHER BODY, BREATHER GASKET, MOUNTING SCREWS & NYLON WASHERS)
3.	9P-7121	[1]	STRAINER-FUEL (FUEL TANK)
4.	223-3095 Y	[1]	GAUGE GP-SIGHT (FUEL LEVEL)
5.	4I-0378	[1]	GASKET-RUBBER
6.	095-0736 M	[5]	SCREW-MACHINE (M5X0.8X10-MM)
7.	8T-0328	[5]	WASHER-HARD (5.5X10X1-MM THK)
8.	341-3685	[1]	SENDER AS-FUEL LEVEL (TANK)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	004-6683	[1]	FITTING
10.	4I-0379	[1]	VALVE-MANUAL
11.	003-7764	[2]	END-HOSE
12.	095-1388	[1]	CLAMP-HOSE
13.	103-2529 E		HOSE (18CM)
14.	128-4411	[1]	VALVE AS (FUEL SHUTOFF)
15.	120-5170	[1]	COVER AS
16.	8T-4192 M	[6]	BOLT (M12X1.75X25-MM)
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

142-5847: VALVE GP-FUEL SHUTOFF

VALVE GP-FUEL SHUTOFF

142-5847 VALVE GP-FUEL SHUTOFF
S/N 1YS1-UP
PART OF 135-1729, 140-9419 SPECIAL AR-LOG LOADER
AN ATTACHMENT

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-7611	[1]	GROMMET
2.	093-2065	[1]	GROMMET
3.	2W-6818	[1]	KNOB
4.	2W-6819	[1]	KNOB
5.	6V-8187	[4]	NUT (1/4-28-THD)
6.	142-7108	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
	9B-2923	[1]	HINGE
7.	152-6749	[2]	VALVE-BALL
8.	003-2143	[1]	ELBOW
9.	030-7764	[2]	FITTING
10.	142-2889	[2]	CABLE AS
			(EACH INCLUDES)
	6F-0253	[4]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	9S-1354	[4]	NUT (5/8-18-THD)
11.	8B-3768	[2]	ROD END
12.	9S-1303	[2]	PIN
13.	3B-4607	[2]	PIN-COTTER
14.	9X-2026	[2]	WASHER (6.5X17X1-MM THK)
15.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
16.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
17.	003-7764	[2]	END-HOSE
18.	003-9514	[2]	COUPLING-PIPE
19.	5P-8502	[1]	PADLOCK GP
	5P-8500 A	[1]	KEY
20.	6V-5710	[1]	VALVE-BALL
	A		NOT PART OF THIS GROUP
	M		METRIC PART

111-4696: ALARM GP-TRAVEL

ALARM GP-TRAVEL

111-4696 ALARM GP-TRAVEL
S/N 1YS1-UP
PART OF 134-2245 CHASSIS AR

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-7738	[1]	ALARM GP
	3E-7739	[1]	WIRE AS
	3T-1815	[1]	ALARM GP
2.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
3.	7X-2538 M	[2]	BOLT (M8X1.25X100-MM)
	M		METRIC PART

124-0643: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

124-0643 ALTERNATOR GP-CHARGING
S/N 98Z16500-UP
24 VOLT, 55 AMPERE
PART OF 131-3804 ENGINE AR

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-3463	[1]	BRACKET-ALTERNATOR
2.	9W-3043 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 52-AMPERE)
3.	9Y-1751	[1]	STRAP
4.	8T-4186 M	[2]	BOLT (M10X1.5X40-MM)
5.	8T-4222	[1]	WASHER-PLATED (11X32X2.5-MM THK)
6.	4N-0205	[1]	SPACER (0.42X0.75X0.6-IN THK)
7.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
8.	4P-4318	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
9.	7X-2543 M	[1]	BOLT (M10X1.5X120-MM)
10.	7C-5583	[1]	SPACER
11.	8T-7547 M	[4]	BOLT (M8X1.25X30-MM)
12.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

9W-3043: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

9W-3043 ALTERNATOR GP-CHARGING
S/N 98Z16500-UP
24-VOLT, 52-AMPERE
PART OF 124-0643 ALTERNATOR GP-CHARGING

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8F-1434	[2]	LOCKWASHER
2.	8C-6141	[1]	PLATE-SUPPORT
3.	9W-1904	[1]	FAN (12-BLADE)
4.	9W-1901 M	[4]	SCREW (M5X0.8X96-MM)
5.	8C-6149	[1]	FRAME AS
6.	2P-8099	[1]	BALL BEARING
7.	9W-1794	[1]	COVER
8.	8C-6146	[1]	ROTOR
9.	1H-3244	[1]	LOCKWASHER
10.	9W-1793	[1]	BEARING
11.	8C-6147	[1]	STATOR
12.	6V-9492 M	[2]	SCREW-MACHINE (M4X0.7X25-MM)
13.	8C-6144	[1]	RECTIFIER
14.	8C-6148	[1]	FRAME AS
15.	6V-5210 M	[2]	SCREW-MACHINE (M4X0.7X10-MM)
16.	096-6166	[5]	WASHER-HARD (4.5X9X1-MM THK)
17.	105-2063	[1]	REGULATOR AS-ALTERNATOR (24-VOLT)
18.	9B-7233	[1]	LOCKWASHER
19.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
20.	5C-2890 M	[2]	NUT (M6X1-THD)
21.	5C-2874 M	[1]	NUT (M5X0.8-THD)
22.	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
23.	5C-7261 M	[1]	NUT (M8X1.25-THD)
24.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
25.	5C-8312 M	[1]	NUT (M4X0.7-THD)
26.	6V-9673 M	[1]	SCREW-MACHINE (M5X0.8X12-MM)
27.	9W-1900	[1]	CAPACITOR
28.	8C-6143	[1]	GASKET
29.	8C-6142	[1]	RING-FITTING

			AVAILABLE REPAIR KIT(S):
	9W-1912	[1]	KIT-HARDWARE (ALTERNATOR AIR)
			(INCLUDES SPACERS, LOCKWASHERS, NUTS, SCREWS & KEY)
	8C-6150	[1]	KIT-TERMINAL (ALTERNATOR AIR)
			(INCLUDES NUTS, WASHERS, INSULATORS, BUSHING, STUD & CAP)
	M		METRIC PART

116-0183: BATTERY & WIRING GP

BATTERY & WIRING GP

116-0183 BATTERY & WIRING GP
S/N 1YS1-UP
PART OF 134-2245 CHASSIS AR

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	138-4281	[1]	HARNESS AS
2.	111-4836	[38]	CLIP
3.	8T-4195 M	[8]	BOLT (M10X1.5X30-MM)
4.	8T-4121	[92]	WASHER-HARD (11X21X2.5-MM THK)
5.	111-4837	[23]	CLIP
6.	8T-4137 M	[57]	BOLT (M10X1.5X20-MM)
7.	7Y-8167	[2]	GROMMET (50-MM ID)
8.	8T-4191 M	[9]	BOLT (M10X1.5X16-MM)
9.	7Y-8165	[1]	GROMMET
10.	116-0118	[15]	CLIP
11.	111-4883	[1]	BRACKET AS
12.	138-4282	[1]	HARNESS AS-WIRING (BOOM LIGHTS, HORN)
13.	116-0229	[2]	BRACKET AS
14.	116-0230	[1]	BRACKET AS
15.	111-4838	[5]	CLIP
16.	111-4839	[5]	STRAP
17.	142-5536	[2]	GROMMET
18.	7X-2621 M	[4]	BOLT (M10X1.5X12-MM)
19.	7G-1060	[1]	STRAP AS-GROUND
20.	135-6086	[1]	HARNESS AS-CAB (REAR)
21.	132-1805	[1]	STRAP AS-GROUND
22.	102-7886	[1]	SPACER (11X20X80-MM THK)
23.	8T-4198 M	[1]	BOLT (M10X1.5X100-MM)
24.	8T-4189 M	[5]	BOLT (M8X1.25X20-MM)
25.	5P-4116	[7]	WASHER-HARD (8.8X20.5X2-MM THK)
26.	3S-2093	[10]	STRAP-CABLE
27.	6E-1435	[2]	SPACER (11X30X29-MM THK)
28.	6G-2256	[2]	CLAMP
29.	2G-8767	[4]	WASHER (10.5X60X3-MM THK)
30.	6G-2263	[4]	SPACER (10.5X19X28.5-MM THK)
31.	8T-4172 M	[2]	BOLT (M10X1.5X80-MM)
32.	130-8446	[1]	HARNESS AS
33.	130-8241	[1]	BRACKET AS
34.	8T-4136 M	[9]	BOLT (M10X1.5X25-MM)
35.	085-7329	[1]	SPACER (9X19X30-MM THK)
36.	7Y-8168	[1]	GROMMET
37.	093-2068	[1]	GROMMET
38.	125-4861	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(270CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
39.	116-0080	[1]	CABLE AS (JUMPER)
	5P-0761 E		CABLE (00-GA, RED)(31CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
40.	125-4727	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(27CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)(FLAT)
	9G-8909	[1]	COVER-TERMINAL (BLACK)(SPHERICAL)
	3S-6050	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
41.	4I-4641	[1]	GROMMET
42.	3T-5760	[2]	BATTERY GP (12-VOLT, 750-CCA)
43.	6W-6005	[1]	HOLD-DOWN-BATTERY
44.	121-1044	[1]	HARNESS AS-POWER (NEUTRAL START RELAY)
45.	8T-4133 M	[1]	NUT (M10X1.5-THD)
46.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
47.	5I-8304	[1]	ROD
48.	5C-7261 M	[1]	NUT (M8X1.25-THD)
49.	116-0068	[1]	BRACKET
50.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50CM)
51.	7Y-8169	[1]	GROMMET
52.	8T-6912 M	[1]	BOLT (M8X1.25X50-MM)
53.	128-8928	[1]	BRACKET AS
54.	138-4422 Y	[1]	PANEL GP-CIRCUIT BREAKER
55.	132-1973	[1]	HARNESS AS-LIGHTING (CHASSIS)
56.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
57.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
58.	4S-1962	[1]	CLIP (LOOP)
59.	7Y-8109	[1]	BRACKET AS
60.	7Y-3195	[1]	GROMMET
61.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
62.	3S-8665	[1]	CLIP (LOOP)
63.	6W-6672	[1]	SPACER (10.5X20X38-MM THK)
64.	8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
65.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
66.	7K-1181	[4]	STRAP-CABLE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

FUEL SYSTEM

PUMP GP-FUEL PRIMING

Truck Engine News

An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08

Engine News

An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08

Operation and Maintenance Manual

Fuel System Priming Pump - Operate
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler

Special Instruction

Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}

Service Letter-NACD

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

Service Letter-Australia

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

Service Letter-CFEL

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Specifications

Primary Fuel Filter
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR

Tool Operating Manual

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Service Letter-China

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

Service Letter-Asia

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

Service Letter-APD

All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines

Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines

Testing and Adjusting

Fuel System - Prime
3114, 3116, and 3126 Engines

Disassembly and Assembly

Fuel Priming Pump
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE

Fuel Filter & Fuel Filter Base
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE

Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Service Magazine

Improved Fuel Priming Pump Used{1258}
1987/04/20

New Larger Capacity Water Separator Is Available{1250}
1979/03/12

Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29

An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04

Caterpillar Parts SIS Catalog 322B L :

Truck sale:

59,500

Caterpillar 322BL, Construction
- Crawler Excavators
RING POWER CORP.

35,000

Caterpillar 322BL, Construction
- Crawler Excavators
MICHIGAN CAT

45,000

Caterpillar 322BL, Construction
- Crawler Excavators
WAGNER EQUIPMENT CO

42,500

Caterpillar 322BL, Construction
- Crawler Excavators
WAGNER EQUIPMENT CO

34,000

Caterpillar 322BL, Construction
- Crawler Excavators
TRACTOR & EQUIPMENT CO.