ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP25850200
106-0057: WIRING GP-CONSOLE
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 119-5026 | [8] | SCREW-PAN HEAD (10-16X0.63-IN) | |
2. | 134-4430 | [1] | CABLE AS-COAXIAL | |
3. | 9W-1442 | [21] | FUSE (10-AMPERE) | |
4. | 9W-1441 | [6] | FUSE (15-AMPERE) | |
5. | 7Y-5493 | [1] | TOOL (FUSE PULLER) | |
6. | 111-4799 | [1] | SWITCH AS-LIMIT (NEUTRAL START) | |
102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
5P-5998 D | TUBE (300MM) | |||
3E-3390 | [3] | PIN-CONNECTOR | ||
3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
3S-2093 | [1] | STRAP-CABLE | ||
7. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
8. | 096-5962 | [2] | WASHER-HARD (3.4X7X0.8-MM THK) | |
9. | 116-0082 | [2] | STRAP | |
10. | 125-4726 | [1] | CLIP | |
11. | 3S-2093 | [1] | STRAP-CABLE | |
12. | 132-1979 | [1] | HARNESS AS | |
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
13. | 134-5274 | [1] | BRACKET | |
D | ORDER BY THE METER | |||
M | METRIC PART |
#SEBP25850201
106-0058: WIRING GP-CONSOLE
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 114-0421 | [1] | SWITCH AS-TOGGLE | |
(BACKUP ENGINE PUMP REGULATION VALVE) | ||||
3L-8187 | [12] | LOCKWASHER | ||
6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
6T-3632 | [1] | LOCKWASHER | ||
6T-3633 | [1] | RING-LOCKING | ||
6V-8374 | [12] | SCREW-MACHINE (6-32X0.25-IN) | ||
2. | 110-7884 | [1] | SWITCH AS-TOGGLE (MOMENTARY)(BACKUP GOVERNOR) | |
3L-8187 | [3] | LOCKWASHER | ||
6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
6T-3632 | [1] | LOCKWASHER | ||
6T-3633 | [1] | RING-LOCKING | ||
6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
3. | 119-5026 | [3] | SCREW-PAN HEAD (10-16X0.63-IN) | |
4. | 116-0082 | [4] | STRAP | |
5. | 121-1049 | [1] | BRACKET | |
6. | 163-6630 | [1] | PANEL AS-CONTROL | |
7. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY)(KEY SWITCH) | |
8. | 185-9208 | [1] | KNOB AS | |
9. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
11. | 106-0107 | [1] | SWITCH GP-ROTARY (THROTTLE) | |
8T-8737 | [1] | PLUG-SEAL | ||
3E-3390 | [5] | PIN-CONNECTOR | ||
102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
3E-3383 | [4] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
7Y-5458 M | [1] | NUT (M12X1-THD) | ||
7Y-5464 | [1] | WASHER (12.2X15.4X0.5-MM THK) | ||
106-0210 | [1] | SEAL | ||
12. | 106-0211 | [1] | BRACKET AS | |
13. | 121-1160 | [1] | WASHER (25.5X34X1-MM THK) | |
14. | 113-0308 | [1] | SEAL-O-RING | |
15. | 125-4726 | [1] | CLIP | |
16. | 3S-2093 | [1] | STRAP-CABLE | |
17. | 141-6437 | [1] | HARNESS AS | |
18. | 111-4785 | [1] | SWITCH AS-ROCKER (LOWER WIPER) | |
116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
116-0174 | [5] | TERMINAL | ||
19. | 111-4786 | [1] | SWITCH AS-ROCKER (LOWER WASHER)(LOWER WASHER) | |
116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
116-0174 | [4] | TERMINAL | ||
20. | 111-4788 | [1] | SWITCH AS (FINE SWING) | |
116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
116-0174 | [5] | TERMINAL | ||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25850202
139-9393: WIRING GP-FUEL TANK SELECTOR
139-9393 WIRING GP-FUEL TANK SELECTOR
S/N 1YS1-UP
PART OF 138-8077 COUNTERWEIGHT AR-FUEL
AN ATTACHMENT
S/N 1YS1-UP
PART OF 138-8077 COUNTERWEIGHT AR-FUEL
AN ATTACHMENT
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3S-2093 | [27] | STRAP-CABLE | |
2. | 141-7807 | [1] | HARNESS AS | |
3. | 138-5204 | [1] | SWITCH AS-ROCKER (FUEL TANK SELECTOR) | |
4. | 141-1673 | [1] | HARNESS AS | |
5. | 111-4871 | [1] | RELAY (24-VOLT)(FUEL) | |
6. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
7. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
8. | 7K-1181 | [3] | STRAP-CABLE | |
9. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
10. | 9M-8406 | [1] | CLIP (LOOP) | |
11. | 6V-3265 | [1] | CLIP | |
12. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
13. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
M | METRIC PART |
#SEBP25850203
133-8930: WIRING GP-GRAPPLE CONTROL
133-8930 WIRING GP-GRAPPLE CONTROL
S/N 1YS1-949
PART OF 136-0057, 149-8741 HYDRAULIC AR-GRAPPLE ROTATOR
AN ATTACHMENT
S/N 1YS1-949
PART OF 136-0057, 149-8741 HYDRAULIC AR-GRAPPLE ROTATOR
AN ATTACHMENT
Parts for your 322B L EXCAVATOR:
CATERPILLAR SIS#SEBP25850204
133-8930: WIRING GP-GRAPPLE CONTROL
133-8930 WIRING GP-GRAPPLE CONTROL
S/N 1YS1-UP
PART OF 136-0057, 149-8741, 197-6444 HYDRAULIC AR-GRAPPLE ROTATOR
AN ATTACHMENT
S/N 1YS1-UP
PART OF 136-0057, 149-8741, 197-6444 HYDRAULIC AR-GRAPPLE ROTATOR
AN ATTACHMENT
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 140-0172 | [1] | HARNESS AS | |
2. | 133-9656 | [1] | HARNESS AS | |
3. | 166-8057 Y | [1] | PANEL GP-RELAY (GRAPPLE CONTROL) | |
4. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
5. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
6. | 111-4836 | [3] | CLIP | |
7. | 3S-2093 | [30] | STRAP-CABLE | |
8. | 167-1063 | [1] | HARNESS AS | |
9. | 167-1062 | [2] | HARNESS AS | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25850205
137-6917: WIRING GP-GRAPPLE CONTROL
137-6917 WIRING GP-GRAPPLE CONTROL
S/N 1YS1-UP
PART OF 138-8082, 145-9139 HYDRAULIC AR
AN ATTACHMENT
S/N 1YS1-UP
PART OF 138-8082, 145-9139 HYDRAULIC AR
AN ATTACHMENT
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4K-8864 | [1] | CLIP | |
2. | 3S-2093 | [19] | STRAP-CABLE | |
3. | 141-9294 | [1] | HARNESS AS | |
4. | 143-0841 | [1] | CONTROL GP-FOOT | |
5. | 1A-0621 | [1] | GROMMET | |
6. | 2H-1855 | [1] | SWITCH AS-FOOT | |
6V-8362 | [3] | SCREW-MACHINE (8-32X0.31-IN) | ||
9B-7233 | [3] | LOCKWASHER | ||
7. | 6V-1322 | [2] | BOLT (1/4-20X0.375-IN) | |
8. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
9. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
10. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
11. | 142-5834 | [1] | STRIP | |
12. | 155-6688 | [1] | SUPPORT AS | |
117-6356 | [1] | STEP AS | ||
13. | 155-7418 | [1] | COVER AS | |
14. | 142-1833 | [1] | HARNESS AS | |
M | METRIC PART |
#SEBP25850206
150-9159: WIRING GP-GRAPPLE CONTROL
150-9159 WIRING GP-GRAPPLE CONTROL
S/N 1YS1-UP
PART OF 151-2729, 151-2730 HYDRAULIC AR-GRAPPLE ROTATOR
Type 1
AN ATTACHMENT
S/N 1YS1-UP
PART OF 151-2729, 151-2730 HYDRAULIC AR-GRAPPLE ROTATOR
Type 1
AN ATTACHMENT
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 140-0172 | [1] | HARNESS AS | |
2. | 133-9656 | [1] | HARNESS AS | |
3. | 150-7156 | [1] | HARNESS AS | |
4. | 141-5418 Y | [1] | PANEL GP-RELAY | |
5. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
6. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
7. | 111-4836 | [1] | CLIP | |
8. | 3S-2093 | [50] | STRAP-CABLE | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25850207
150-9159: WIRING GP-GRAPPLE CONTROL
150-9159 WIRING GP-GRAPPLE CONTROL
S/N 1YS1-UP
PART OF 151-2729, 151-2730, 197-6445 HYDRAULIC AR-GRAPPLE ROTATOR
Type 2
AN ATTACHMENT
S/N 1YS1-UP
PART OF 151-2729, 151-2730, 197-6445 HYDRAULIC AR-GRAPPLE ROTATOR
Type 2
AN ATTACHMENT
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 140-0172 | [1] | HARNESS AS | |
2. | 133-9656 | [1] | HARNESS AS | |
3. | 150-7156 | [1] | HARNESS AS | |
4. | 166-8059 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
5. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
7. | 111-4836 | [1] | CLIP | |
8. | 3S-2093 | [50] | STRAP-CABLE | |
9. | 167-1063 | [1] | HARNESS AS | |
10. | 167-1062 | [2] | HARNESS AS | |
11. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
12. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25850208
128-7868: WIRING GP-HAMMER
128-7868 WIRING GP-HAMMER
S/N 1YS1-UP
SINGLE FUNCTION
PART OF 138-4465 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N 1YS1-UP
SINGLE FUNCTION
PART OF 138-4465 CONTROL AR-AUXILIARY
AN ATTACHMENT
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 111-4837 | [3] | CLIP | |
2. | 116-0118 | [4] | CLIP | |
3. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
4. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
5. | 136-1209 | [1] | HARNESS AS | |
6. | 3S-2093 | [17] | STRAP-CABLE | |
7. | 111-4787 | [1] | SWITCH AS-ROCKER (HYDRAULIC FLOW MODE) | |
116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
116-0174 | [4] | TERMINAL | ||
8. | 136-1208 | [1] | HARNESS AS | |
9. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
M | METRIC PART |
#SEBP25850209
163-1642: WIRING GP-LOG LOADER
163-1642 WIRING GP-LOG LOADER
S/N 1YS1-UP
BUTT-N-TOP
PART OF 163-3314, 163-3315 HYDRAULIC AR-LOG LOADER
AN ATTACHMENT
S/N 1YS1-UP
BUTT-N-TOP
PART OF 163-3314, 163-3315 HYDRAULIC AR-LOG LOADER
AN ATTACHMENT
Parts for your 322B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 143-0841 | [1] | CONTROL GP-FOOT | |
2. | 1A-0621 | [1] | GROMMET | |
3. | 2H-1855 | [1] | SWITCH AS-FOOT | |
6V-8362 | [3] | SCREW-MACHINE (8-32X0.31-IN) | ||
9B-7233 | [3] | LOCKWASHER | ||
4. | 6V-1322 | [2] | BOLT (1/4-20X0.375-IN) | |
5. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
6. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
7. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
8. | 142-5834 | [1] | STRIP | |
9. | 155-6688 | [1] | SUPPORT AS | |
117-6356 | [1] | STEP AS | ||
10. | 155-7418 | [1] | COVER AS | |
11. | 142-1833 | [1] | HARNESS AS | |
12. | 163-2401 | [1] | HARNESS AS | |
13. | 3S-2093 | [25] | STRAP-CABLE | |
14. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
15. | 111-4836 | [3] | CLIP | |
16. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
17. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
18. | 111-4871 | [1] | RELAY (24-VOLT) | |
19. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
20. | 138-5181 | [1] | BRACKET AS | |
21. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
22. | 6V-2383 | [2] | CLIP | |
23. | 5P-1076 | [3] | WASHER-HARD (13.5X30X4-MM THK) | |
24. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
M | METRIC PART |
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Operation and Maintenance Manual
Fuses - Replace
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
Window Wiper and Washer Control
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
Service Hour Meter
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
Battery Disconnect Switch
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
Battery or Battery Cable - Inspect/Replace
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
Battery - Recycle
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Installation Procedure for 180-8007 Heat and Air Conditioner Control Group on Certain Excavators{1408, 7304, 7320}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Technical Information Bulletin
Specifications
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Switches
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Sensors
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Senders
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Monitoring System
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Check of Speed Sensor - Troubleshoot - 4201 And 4302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Does Not Work - Troubleshoot - 420E And 2303
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Low Idle Switch Does Not Work - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Electrical Components And Connector Locations
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller Connector Contact Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
System Schematic
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Harness and Wire Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Speed Sensor - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Troubleshooting
Indicator for Volts Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Indicator for Positive Ground Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Indicator for Generator Hot
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Indicator for Over 75% Duty Cycle
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Indicator for Negative Ground Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Service Magazine
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
1987/05/04
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
1979/01/29
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
1999/06/28
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
2000/04/10
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}