AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE S/N 2GS285-UP PART OF 7D-9600 SHAFT GP-PUMP DRIVE 12H ES MOTOR GRADER


HYDRAULIC SYSTEM
SHAFT GP
VALVE & LINKAGE GP

MOTOR GRADER 12H ES MOTOR GRADER 2GS
 12H Motor Grader 2GS00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2589 12H ES 2GS   (1996)

HYDRAULIC SYSTEM

SHAFT GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
 

#SEBP25890570
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 2GS285-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00491052 SEBP2589
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
3. 027-1287 [1] FITTING-GREASE (PUMP DRIVE)  
4. 9K-2721 [2] LOCKWASHER  
5. 6G-6623 [1] SEAL  
6. 5H-3593 [1] RETAINER-FELT  
7. 6G-4358 [1] YOKE  
8. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP25890571
 

5Y-0769: UNIVERSAL JOINT GP-PUMP DRIVE

5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 2GS1-284
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00125215 SEBP2589
5Y0769 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Y-0766 [1] YOKE AS-SLIP  
2. 2Y-5755 [3] FITTING  
3. 5Y-0768 [1] YOKE  
4. 5Y-0767 [2] BEARING  
 

#SEBP25890572
 

121-4083: VALVE & LINKAGE GP

121-4083 VALVE & LINKAGE GP -BANK 4-LH,RH
S/N 2GS1-UP
PART OF 124-4190 BLADE AR
i00126055 SEBP2589
1214083 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-3116 CY [1] VALVE GP-BANK 4 (RH)  
2. 130-3117 CY [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTERSHIFT)  
6. 8X-4276 [8] ROD  
  6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
42. 8D-5633 [1] LEVER (SIDESHIFT)  
43. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25890573
 

121-4086: VALVE & LINKAGE GP

121-4086 VALVE & LINKAGE GP -BANK 5 LH-RH
S/N 2GS1-UP
AN ATTACHMENT
i00126057 SEBP2589
1214086 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [2] LEVER  
5. 8D-5633 [2] LEVER  
6. 8D-5634 [2] LEVER  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [12] BEARING  
10. 8D-5641 [10] BEARING  
11. 8W-0456 [1] SHAFT  
12. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
12A. 146-0705 [1] ROD  
12B. 7H-3641 [1] END-ROD (5/16-24-THD)  
12C. 8L-8598 [1] ROD END  
12D. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [2] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 130-3119 CY [1] VALVE GP-BANK 5 (LH)  
23. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
24. 2G-6747 [1] KNOB-BLADE TIP  
25. 2G-6748 [1] KNOB-BLADE LIFT  
26. 2G-6749 [1] KNOB-SIDESHIFT  
27. 2G-6751 [1] KNOB-CIRCLE DRIVE  
28. 2G-6752 [1] KNOB-ARTICULATION  
29. 2G-6753 [1] KNOB-SCARIFIER  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
35. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
36. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25890574
 

121-4090: VALVE & LINKAGE GP

121-4090 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N 2GS1-UP
PART OF 124-3776 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00126058 SEBP2589
1214090 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [9] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5641 [9] BEARING  
12. 8L-8598 [9] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 146-0705 [9] ROD  
23. 130-3116 CY [1] VALVE GP-BANK 4 (RH)  
24. 130-3118 CY [1] VALVE GP-BANK 5 (LH)  
25. 2G-6740 [1] KNOB-RIPPER  
26. 2G-6747 [1] KNOB-BLADE TIP  
27. 2G-6748 [1] KNOB-BLADE LIFT  
28. 2G-6749 [1] KNOB-SIDESHIFT  
29. 2G-6751 [1] KNOB-CIRCLE DRIVE  
30. 2G-6752 [1] KNOB-ARTICULATION  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8186 [9] NUT-FULL (5/16-24-THD)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25890575
 

121-4095: VALVE & LINKAGE GP

121-4095 VALVE & LINKAGE GP -BANK 4-RH-BANK 5-LH
S/N 2GS1-UP
AN ATTACHMENT
i00126060 SEBP2589
1214095 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [9] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5641 [9] BEARING  
12. 8L-8598 [9] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [2] LEVER  
16. 101-2458 [1] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 146-0705 [9] ROD  
23. 130-3116 CY [1] VALVE GP-BANK 4 (RH)  
24. 130-3119 CY [1] VALVE GP-BANK 5 (LH)  
25. 2G-6747 [1] KNOB-BLADE TIP  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6749 [1] KNOB-SIDESHIFT  
28. 2G-6751 [1] KNOB-CIRCLE DRIVE  
29. 2G-6752 [1] KNOB-ARTICULATION  
30. 2G-6753 [1] KNOB-SCARIFIER  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8186 [9] NUT-FULL (5/16-24-THD)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25890576
 

121-4097: VALVE & LINKAGE GP

121-4097 VALVE & LINKAGE GP -BANK 5-LH,RH
S/N 2GS1-UP
PART OF 124-3775 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00126062 SEBP2589
1214097 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [10] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [12] BEARING  
11. 8D-5641 [10] BEARING  
12. 8L-8598 [10] ROD END  
13. 8W-0456 [1] SHAFT  
14. 8X-5499 [2] RETAINER  
15. 9M-1853 [6] MOUNTING  
16. 101-2457 [2] LEVER  
17. 101-2458 [2] LEVER  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4516 [1] SHAFT  
23. 146-0705 [10] ROD  
24. 130-3118 CY [1] VALVE GP-BANK 5 (LH)  
25. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
26. 2G-6740 [1] KNOB-RIPPER  
27. 2G-6747 [1] KNOB-BLADE TIP  
28. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
29. 2G-6749 [1] KNOB-SIDESHIFT  
30. 2G-6751 [1] KNOB-CIRCLE DRIVE  
31. 2G-6752 [1] KNOB-ARTICULATION  
32. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
33. 2G-6755 [1] KNOB-CENTERSHIFT  
34. 2G-6756 [1] KNOB-WHEEL LEAN  
35. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
36. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
39. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
40. 6V-8186 [10] NUT-FULL (5/16-24-THD)  
41. 6V-8188 [2] NUT (1/2-13-THD)  
42. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
43. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
45. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
46. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
47. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25890577
 

124-3771: VALVE & LINKAGE GP

124-3771 VALVE & LINKAGE GP -BANK 4-LH-BANK 5-RH
S/N 2GS1-UP
AN ATTACHMENT
i00126119 SEBP2589
1243771 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [9] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [11] BEARING  
11. 8D-5641 [9] BEARING  
12. 8L-8598 [9] ROD END  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER  
16. 101-2458 [2] LEVER  
17. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
18. 104-7429 [2] PLATE  
19. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 137-4515 [2] BUSHING  
21. 137-4516 [1] SHAFT  
22. 146-0705 [9] ROD  
23. 130-3117 CY [1] VALVE GP-BANK 4 (LH)  
24. 130-3123 CY [1] VALVE GP-BANK 5 (RH)  
25. 2G-6747 [1] KNOB-BLADE TIP  
26. 2G-6748 [1] KNOB-BLADE LIFT  
27. 2G-6749 [1] KNOB-SIDESHIFT  
28. 2G-6751 [1] KNOB-CIRCLE DRIVE  
29. 2G-6752 [1] KNOB-ARTICULATION  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 2G-6755 [1] KNOB-CENTERSHIFT  
32. 2G-6756 [1] KNOB-WHEEL LEAN  
33. 2G-6757 [1] KNOB-BLADE LIFT  
34. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8186 [9] NUT-FULL (5/16-24-THD)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
44. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25890578
 

124-3813: VALVE & LINKAGE GP

124-3813 VALVE & LINKAGE GP
S/N 2GS1-UP
AN ATTACHMENT
i00516932 SEBP2589
1243813 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [20] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [10] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [12] BEARING  
11. 8D-5641 [10] BEARING  
12. 8L-8598 [10] ROD END  
13. 8W-0456 [1] SHAFT  
14. 8X-5499 [2] RETAINER  
15. 9M-1853 [6] MOUNTING  
16. 101-2457 [1] LEVER  
17. 101-2458 [2] LEVER  
18. 103-1597 [1] LEVER (PLOW/DOZER ANGLE)  
19. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 104-7429 [2] PLATE  
21. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
22. 137-4515 [2] BUSHING  
23. 137-4516 [1] SHAFT  
24. 146-0705 [10] ROD  
25. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
26. 130-3117 CY [1] VALVE GP-BANK 4 (LH)  
27. 130-3124 CY [1] VALVE GP-BANK 6 (RH)  
28. 2G-6747 [1] KNOB-BLADE TIP  
29. 2G-6748 [1] KNOB-BLADE LIFT  
30. 2G-6749 [1] KNOB-SIDESHIFT  
31. 2G-6751 [1] KNOB-CIRCLE DRIVE  
32. 2G-6752 [1] KNOB-ARTICULATION  
33. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
34. 2G-6755 [1] KNOB-CENTERSHIFT  
35. 2G-6756 [1] KNOB-WHEEL LEAN  
36. 2G-6757 [1] KNOB-BLADE LIFT  
37. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
38. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6V-8186 [10] NUT-FULL (5/16-24-THD)  
42. 6V-8188 [2] NUT (1/2-13-THD)  
43. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
46. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
47. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
48. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25890579
 

124-3814: VALVE & LINKAGE GP

124-3814 VALVE & LINKAGE GP -BANK 5-RH-BANK 6-LH
S/N 2GS1-UP
PART OF 124-3816 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00126124 SEBP2589
1243814 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12H ES MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [22] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
4. 7H-3641 [11] END-ROD (5/16-24-THD)  
5. 8D-5632 [2] LEVER  
6. 8D-5633 [2] LEVER  
7. 8D-5634 [2] LEVER  
8. 8D-5636 B [4] SHIM (0.254-MM THK)  
9. 8D-5637 B [4] SHIM (0.762-MM THK)  
10. 8D-5640 [13] BEARING  
11. 8D-5641 [11] BEARING  
12. 8L-8598 [11] ROD END  
13. 8W-0456 [2] SHAFT  
14. 8X-5499 [2] RETAINER  
15. 9M-1853 [6] MOUNTING  
16. 101-2457 [2] LEVER  
17. 101-2458 [2] LEVER  
18. 103-1597 [1] LEVER  
19. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
20. 104-7429 [2] PLATE  
21. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
22. 137-4515 [2] BUSHING  
23. 137-4516 [1] SHAFT  
24. 146-0705 [11] ROD  
25. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
26. 130-3118 CY [1] VALVE GP-BANK 5 (LH)  
27. 130-3124 CY [1] VALVE GP-BANK 6 (RH)  
28. 2G-6740 [1] KNOB-RIPPER  
29. 2G-6747 [1] KNOB-BLADE TIP  
30. 2G-6748 [1] KNOB-BLADE LIFT  
31. 2G-6749 [1] KNOB-SIDESHIFT  
32. 2G-6751 [1] KNOB-CIRCLE DRIVE  
33. 2G-6752 [1] KNOB-ARTICULATION  
34. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
35. 2G-6755 [1] KNOB-CENTERSHIFT  
36. 2G-6756 [1] KNOB-WHEEL LEAN  
37. 2G-6757 [1] KNOB-BLADE LIFT  
38. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
39. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
41. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
42. 6V-8186 [11] NUT-FULL (5/16-24-THD)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
45. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
47. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
48. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 12H ES :

TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
9T-5604 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWASHPLATE GP
100-3416 SWASHPLATE GP
UNIVERSAL JOINT GP-PUMP DRIVE
5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
121-4083 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4086 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4090 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4095 VALVE & LINKAGE GP
VALVE & LINKAGE GP
121-4097 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-3771 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-3813 VALVE & LINKAGE GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.