POWER TRAIN
CONTROL GP-TRANSMISSION HYDCOOLER GP
DRIVE GP-FINAL
FILLER GP-POWER TRAIN OIL
FILTER GP
GEAR GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP25900160
8P-3046: CONTROL GP-TRANSMISSION HYD
8P-3046 CONTROL GP-TRANSMISSION HYD
S/N 2ZY1-UP
PART OF 131-9269 TRANSMISSION AR
S/N 2ZY1-UP
PART OF 131-9269 TRANSMISSION AR
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8P-3045 Y | [1] | VALVE GP-TRANSMISSION CONTROL | |
| 2. | 5F-4899 | [4] | BOLT (3/8-16X5.5-IN) | |
| 3. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4. | 9G-1672 | [1] | ELBOW | |
| 5. | 6T-0423 | [1] | SUPPORT | |
| 6. | 3T-8218 | [1] | SLEEVE | |
| 7. | 8M-8157 | [4] | SEAL-O-RING | |
| 8. | 3T-8217 | [1] | SLEEVE | |
| 9. | 8M-4432 | [4] | SEAL-O-RING | |
| 10. | 3T-8286 | [2] | SLEEVE | |
| 11. | 8L-5922 | [1] | BOLT-LOCKING (5/16-18X0.563-IN) | |
| 12. | 6N-8863 | [1] | WASHER (10.2X32X2.5-MM THK) | |
| 13. | 2M-1672 | [4] | BEARING AS-NEEDLE | |
| 14. | 6T-9735 | [2] | LEVER AS | |
| 15. | 2K-9111 | [1] | PIN-SPRING | |
| 16. | 6T-9738 | [1] | BRACKET AS | |
| 17. | 035-1933 | [2] | WASHER (0.516X1X0.12-IN THK) | |
| 18. | 6T-9736 | [1] | SHAFT | |
| 19. | 5H-9899 | [2] | RING-RETAINING (EXTERNAL) | |
| 20. | 8E-2810 | [1] | RESONATOR AS | |
| 3D-2824 | [2] | SEAL-O-RING | ||
| 6Y-2349 | [1] | CONNECTOR | ||
| 8E-2811 | [1] | BODY-VALVE | ||
| 8M-1322 | [1] | SPRING | ||
| 9S-8008 | [1] | PLUG (1-1/16-12-THD) | ||
| 9W-5435 | [1] | PISTON | ||
| 21. | 3D-2824 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25900161
8N-0130: COOLER GP-TRANSMISSION OIL
8N-0130 COOLER GP-TRANSMISSION OIL
S/N 3DS1-UP; BDW1-UP
PART OF 130-5124 INSTALLATION AR-ENGINE
S/N 3DS1-UP; BDW1-UP
PART OF 130-5124 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-3514 | [1] | CORE AS | |
| 2. | 9M-8546 | [2] | GASKET (TRANSMISSION OIL) | |
| 3. | 8T-8919 | [3] | BOLT (1/2-13X1.75-IN) | |
| 4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 5. | 5P-2424 | [1] | BOLT (1/2-13X2.25-IN) | |
| 6. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 8N-0133 | [1] | BRACKET | |
| 8. | 8T-6871 | [1] | BOLT (5/8-11X2.5-IN) | |
| 9. | 8T-4122 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP25900162
132-5536: DRIVE GP-FINAL
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-3980 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 2. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0439 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL DRAIN) | |
| 4. | 2S-4078 | [1] | SEAL-O-RING | |
| 5. | 8T-9399 | [28] | BOLT (3/4-10X2.25-IN) | |
| 6. | 8T-4994 | [58] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 7. | 8G-4565 | [3] | GEAR-PLANETARY (30-TEETH) | |
| 8. | 132-5537 | [1] | HUB | |
| 9. | 8G-4564 | [3] | SHAFT | |
| 10. | 8G-4573 | [1] | SPINDLE | |
| 11. | 9G-5343 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [1] | RING-TORIC | ||
| 12. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 13. | 9X-7672 | [1] | SEAL-LIP TYPE | |
| 14. | 134-2826 | [1] | SHAFT-SUN GEAR (10-TEETH) | |
| 15. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 16. | 5S-7382 | [3] | BOLT (3/8-16X1.375-IN) | |
| 17. | 106-0712 | [1] | HUB-RING GEAR | |
| 18. | 8G-4569 | [1] | RING | |
| 19. | 8G-4568 | [1] | GEAR-RING (74-TEETH) | |
| 20. | 9H-0846 | [1] | SEAL-O-RING | |
| 21. | 8G-4567 | [1] | CARRIER | |
| 22. | 9G-4876 | [1] | RETAINER | |
| 23. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 24. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 8G-4566 | [1] | PLATE | |
| 26. | 0L-1329 | [9] | BOLT (1/2-13X3-IN) | |
| 27. | 1H-8128 | [1] | SEAL-O-RING | |
| 28. | 2P-3696 | [3] | RETAINER | |
| 29. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 30. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 31. | 3K-0360 | [1] | SEAL-O-RING | |
| 32. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL FILL) | |
| 33. | 2M-3340 | [1] | SEAL-O-RING | |
| 34. | 7X-0368 | [30] | BOLT (3/4-10X3-IN) | |
| 35. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP25900163
132-5536: DRIVE GP-FINAL
132-5536 DRIVE GP-FINAL
S/N 3DS344-UP; BDW1-UP
PART OF 129-7607, 187-8716, 204-9305 POWER TRAIN AR
S/N 3DS344-UP; BDW1-UP
PART OF 129-7607, 187-8716, 204-9305 POWER TRAIN AR
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-3980 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 2. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0439 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL DRAIN) | |
| 4. | 2S-4078 | [1] | SEAL-O-RING | |
| 5. | 8T-9399 | [28] | BOLT (3/4-10X2.25-IN) | |
| 6. | 8T-4994 | [58] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 7. | 8G-4565 | [3] | GEAR-PLANETARY (30-TEETH) | |
| 8. | 132-5537 | [1] | HUB | |
| 9. | 8G-4564 | [3] | SHAFT | |
| 10. | 178-6851 C | [1] | SPINDLE | |
| 11. | 6Y-0859 C | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 C | [2] | RING-TORIC | ||
| 12. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 13. | 9X-7672 | [1] | SEAL-LIP TYPE | |
| 14. | 134-2826 | [1] | SHAFT-SUN GEAR (10-TEETH) | |
| 15. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 16. | 5S-7382 | [3] | BOLT (3/8-16X1.375-IN) | |
| 17. | 178-6854 C | [1] | HUB-RING GEAR | |
| 18. | 8G-4569 | [1] | RING | |
| 19. | 8G-4568 | [1] | GEAR-RING (74-TEETH) | |
| 20. | 9H-0846 | [1] | SEAL-O-RING | |
| 21. | 8G-4567 | [1] | CARRIER | |
| 22. | 9G-4876 | [1] | RETAINER | |
| 23. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 24. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 8G-4566 | [1] | PLATE | |
| 26. | 0L-1329 | [9] | BOLT (1/2-13X3-IN) | |
| 27. | 1H-8128 | [1] | SEAL-O-RING | |
| 28. | 2P-3696 | [3] | RETAINER | |
| 29. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 30. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 31. | 3K-0360 | [1] | SEAL-O-RING | |
| 32. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL FILL) | |
| 33. | 2M-3340 | [1] | SEAL-O-RING | |
| 34. | 7X-0368 | [30] | BOLT (3/4-10X3-IN) | |
| 35. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25900164
132-5536: DRIVE GP-FINAL
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 2. | 1B-3980 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 2P-3696 | [3] | RETAINER | |
| 4. | 8H-0901 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 5. | 8H-0902 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 6. | 2K-5066 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 7. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 8. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 9. | 8G-4564 | [3] | SHAFT | |
| 10. | 8G-4566 | [1] | PLATE | |
| 11. | 8G-4567 | [1] | CARRIER | |
| 12. | 8G-4568 | [1] | GEAR-RING (74-TEETH) | |
| 13. | 8G-4569 | [1] | RING | |
| 14. | 9G-4876 | [1] | RETAINER | |
| 15. | 9X-7672 | [1] | SEAL-LIP TYPE | |
| 16. | 132-5537 | [1] | HUB | |
| 17. | 134-2826 | [1] | SHAFT-SUN GEAR (10-TEETH) | |
| 18. | 176-0184 C | [1] | PLUG AS-DRAIN (MAGNETIC)(FINAL DRIVE, OIL FILL) | |
| 18A. | 2S-4078 | [1] | SEAL-O-RING | |
| 6V-0439 | [1] | PLUG-MAGNETIC | ||
| 19. | 178-6851 | [1] | SPINDLE | |
| 20. | 178-6854 | [1] | HUB-RING GEAR | |
| 21. | 8G-4565 C | [3] | GEAR-PLANETARY (30-TEETH) | |
| 22. | 0L-1329 | [9] | BOLT (1/2-13X3-IN) | |
| 23. | 148-8411 C | [1] | PLUG AS (FINAL DRIVE, OIL DRAIN) | |
| 23A. | 3K-0360 | [1] | SEAL-O-RING | |
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 24. | 1H-8128 | [1] | SEAL-O-RING | |
| 25. | 2M-3340 | [1] | SEAL-O-RING | |
| 26. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 27. | 5S-7382 | [3] | BOLT (3/8-16X1.375-IN) | |
| 28. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 29. | 336-8237 | [30] | BOLT (3/4-10X76.2-IN) | |
| 30. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 31. | 8T-4994 | [58] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 32. | 8T-9399 | [28] | BOLT (3/4-10X2.25-IN) | |
| 33. | 9H-0846 | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25900165
3W-4102: FILLER GP-POWER TRAIN OIL
3W-4102 FILLER GP-POWER TRAIN OIL
S/N 3DS1-UP; BDW1-UP
PART OF 129-7607, 187-8716, 204-9305 POWER TRAIN AR
S/N 3DS1-UP; BDW1-UP
PART OF 129-7607, 187-8716, 204-9305 POWER TRAIN AR
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8G-5654 | [1] | GASKET | |
| 2. | 6Y-5161 BE | [1] | TUBE | |
| 3. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 4. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 3W-3032 | [1] | TUBE AS | |
| 6. | 3W-4103 | [1] | GAUGE-OIL LEVEL (POWER TRAIN) | |
| 7. | 2W-6225 | [1] | CAP AS-OIL FILLER (POWER TRAIN) | |
| 8. | 9G-5127 | [1] | BREATHER (ATMOSPHERIC)(POWER TRAIN OIL FILLER) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP25900166
9W-8668: FILTER GP-OIL
9W-8668 FILTER GP-OIL -TRANSMISSION
S/N 3DS1-UP; BDW1-UP
WITH HOUSING
PART OF 8G-4349 LINES GP-POWER TRAIN OIL
S/N 3DS1-UP; BDW1-UP
WITH HOUSING
PART OF 8G-4349 LINES GP-POWER TRAIN OIL
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7S-8700 | [1] | COVER AS | |
| 3S-4398 | [1] | STUD-TAPERLOCK (1/2-13-THD) | ||
| 2. | 2H-3928 | [1] | SEAL-O-RING | |
| 3. | 0S-1595 | [6] | BOLT (1/2-13X1.25-IN) | |
| 4. | 5K-1770 | [1] | SEAL-O-RING | |
| 5. | 8F-8882 | [2] | SEAL-O-RING | |
| 6. | 9S-4205 | [1] | PLUG | |
| 7. | 238-5084 | [1] | SEAL-O-RING | |
| 8. | 2H-3788 | [1] | LOCKNUT (1/2-13-THD) | |
| 9. | 2S-6462 | [1] | RETAINER | |
| 10. | 343-4464 | [1] | FILTER ELEMENT-OIL (ADVANCED EFFICIENCY)(HYDRAULIC) | |
| 11. | 6T-9222 | [1] | SPOOL | |
| 12. | 6T-9223 | [1] | SPRING | |
| 13. | 8G-4716 | [1] | HOUSING AS | |
| 4J-7533 | [1] | SEAL-O-RING | ||
| 6L-2245 | [1] | PIN-SPRING | ||
| 9S-8001 | [1] | PLUG | ||
| 14. | 5J-2722 B | [2] | SHIM (1.22-MM THK) | |
| 15. | 244-3712 | [1] | PLUG AS | |
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 17. | 5J-4571 | [1] | SPRING | |
| 18. | 5M-2504 | [1] | SLUG | |
| 19. | 7T-5643 | [1] | COVER | |
| 20. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 21. | 8T-7301 | [1] | SEAL-FACE | |
| 22. | 7T-5644 | [1] | SPOOL AS | |
| 7M-8592 | [1] | RING-RETAINING | ||
| 7T-5642 | [1] | SLEEVE | ||
| 8M-4409 | [1] | RETAINER | ||
| 5M-9548 | [1] | SPRING | ||
| 8M-2538 | [1] | POPPET | ||
| 6T-2997 | [1] | SPOOL | ||
| 23. | 4M-1751 B | [2] | SPACER (15.09X0.4-MM THK) | |
| 24. | 309-5130 | [1] | PLUG AS | |
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| B | USE AS REQUIRED | |||
#SEBP25900167
133-9649: GEAR GP-BEVEL & TRANSFER
133-9649 GEAR GP-BEVEL & TRANSFER
S/N 2ZY1-UP
PART OF 131-9269 TRANSMISSION AR
Type 1
S/N 2ZY1-UP
PART OF 131-9269 TRANSMISSION AR
Type 1
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-6520 | [1] | CASE AS | |
| 5. | 9U-9523 | [1] | GEAR-TRANSFER (37-TEETH) | |
| 6. | 3T-9820 B | [1] | SHIM PACK (INCLUDES 25-SHIMS) | |
| 7. | 3T-8527 | [1] | COVER | |
| 8. | 3B-1915 | [6] | BOLT (3/8-16X1.375-IN) | |
| 9. | 6V-2404 | [1] | LOCKWASHER-BEARING | |
| 10. | 1L-6957 | [1] | LOCKNUT-BEARING | |
| 11. | 3T-9674 | [1] | RETAINER | |
| 12. | 0S-1599 | [1] | BOLT (1/2-20X2.75-IN) | |
| 13. | 205-4137 | [3] | CUP-BEARING | |
| 14. | 205-4138 | [3] | CONE-BEARING | |
| 15. | 2D-8009 | [1] | SEAL-O-RING | |
| 16. | 0L-1351 | [4] | BOLT (3/8-16X0.875-IN) | |
| 17. | 2J-6362 | [1] | BEARING | |
| 18. | 1T-0720 | [3] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 19. | 6V-5773 | [1] | SEAL-LIP TYPE | |
| 20. | 3T-8641 | [1] | CAGE-BEARING | |
| 21. | 3T-8639 | [1] | CARRIER-SEAL | |
| 22. | 0S-1595 | [11] | BOLT (1/2-13X1.25-IN) | |
| 23. | 3T-9819 B | [1] | SHIM PACK (INCLUDES 19-SHIMS) | |
| 24. | 9U-9522 | [1] | GEAR-TRANSFER (22-TEETH) | |
| 25. | 9S-7695 | [1] | TEE | |
| 26. | 3T-9815 | [1] | TUBE AS | |
| 27. | 2N-1287 | [2] | ELBOW-FLARED | |
| 28. | 3T-0219 | [1] | RETAINER-BEARING | |
| 29. | 3T-8518 | [1] | CAGE-BEARING | |
| 30. | 200-8644 B | [2] | SHIM PACK (INCLUDES 24-SHIMS) | |
| 31. | 206-2963 | [1] | TUBE AS | |
| 32. | 8L-6557 | [2] | CONNECTOR | |
| 33. | 3T-8469 | [1] | GEAR-BEVEL (31-TEETH) | |
| 34. | 9W-3013 | [1] | SHAFT-BEVEL GEAR | |
| 35. | 5B-0841 | [20] | BOLT (5/8-18X1.75-IN) | |
| 36. | 5P-4921 | [1] | RACE-BEARING OUTER | |
| 37. | 5P-4920 | [1] | RACE & ROLLER AS | |
| 38. | 6T-7996 | [1] | TUBE AS | |
| 39. | 8D-0071 | [1] | TEE-FLARED | |
| 40. | 6T-7995 | [1] | TUBE AS | |
| 41. | 3T-9817 | [1] | TUBE AS | |
| 42. | 0S-1587 | [8] | BOLT (1/2-13X1.75-IN) | |
| 43. | 6V-0456 | [1] | BEARING AS-ROLLER | |
| 44. | 2B-2404 | [1] | CLIP | |
| 45. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 46. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 47. | 3T-8528 | [1] | WASHER (5-MM THK) | |
| 48. | 7T-8859 | [1] | CUP-BEARING | |
| 49. | 7T-8858 | [1] | CONE-BEARING | |
| 50. | 7T-9357 | [1] | PINION-BEVEL (14-TEETH) | |
| 51. | 206-2080 | [1] | TUBE AS | |
| 52. | 052-0572 | [1] | TEE-SWIVEL | |
| 53. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 54. | 1A-5350 | [2] | CLIP | |
| 55. | 0S-1614 | [2] | BOLT (1/4-20X0.5-IN) | |
| B | USE AS REQUIRED | |||
#SEBP25900168
133-9649: GEAR GP-BEVEL & TRANSFER
133-9649 GEAR GP-BEVEL & TRANSFER
S/N 2ZY1-UP
PART OF 131-9269 TRANSMISSION AR
Type 2
S/N 2ZY1-UP
PART OF 131-9269 TRANSMISSION AR
Type 2
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-0073 C | [1] | CASE AS-TRANSMISSION | |
| 2. | 7T-8859 | [1] | CUP-BEARING | |
| 3. | 7T-8858 | [1] | CONE-BEARING | |
| 4. | 265-2109 | [1] | SET-BEVEL GEAR (31, 14-TEETH) | |
| 5. | 226-0931 C | [1] | GEAR-TRANSFER (37-TEETH) | |
| 6. | 3T-9820 B | [1] | SHIM PACK (INCLUDES 25-SHIMS) | |
| 7. | 3T-8527 | [1] | COVER | |
| 8. | 3B-1915 | [6] | BOLT (3/8-16X1.375-IN) | |
| 9. | 6V-2404 | [1] | LOCKWASHER-BEARING | |
| 10. | 1L-6957 | [1] | LOCKNUT-BEARING | |
| 11. | 3T-9674 | [1] | RETAINER | |
| 12. | 0S-1599 | [1] | BOLT (1/2-20X2.75-IN) | |
| 13. | 205-4137 | [3] | CUP-BEARING | |
| 14. | 205-4138 | [3] | CONE-BEARING | |
| 15. | 2D-8009 | [1] | SEAL-O-RING | |
| 16. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 17. | 2J-6362 | [1] | BEARING | |
| 18. | 1T-0720 | [3] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 19. | 318-0106 | [1] | SEAL-LIP TYPE | |
| 20. | 317-8261 | [1] | CAGE-BEARING | |
| 21. | 108-8250 | [1] | CARRIER-SEAL | |
| 22. | 0S-1595 | [11] | BOLT (1/2-13X1.25-IN) | |
| 23. | 3T-9819 B | [1] | SHIM PACK (INCLUDES 19-SHIMS) | |
| 24. | 226-0930 C | [1] | GEAR-TRANSFER (22-TEETH) | |
| 25. | 204-5341 C | [1] | TEE | |
| 26. | 198-9162 C | [1] | TUBE AS | |
| 27. | 032-1268 C | [1] | CONNECTOR (90-DEG) | |
| 28. | 3T-0219 | [1] | RETAINER-BEARING | |
| 29. | 3T-8518 | [1] | CAGE-BEARING | |
| 30. | 200-8644 B | [2] | SHIM PACK (INCLUDES 24-SHIMS) | |
| 31. | 206-2963 | [1] | TUBE AS | |
| 32. | 8L-6557 C | [1] | CONNECTOR | |
| 34. | 9W-3013 | [1] | SHAFT-BEVEL GEAR | |
| 35. | 5B-0841 | [20] | BOLT (5/8-18X1.75-IN) | |
| 36. | 5P-4921 | [1] | RACE-BEARING OUTER | |
| 37. | 5P-4920 | [1] | RACE & ROLLER AS | |
| 38. | 6T-7996 | [1] | TUBE AS | |
| 39. | 8D-0071 | [1] | TEE-FLARED | |
| 40. | 6T-7995 | [1] | TUBE AS | |
| 41. | 198-9163 C | [1] | TUBE AS | |
| 42. | 0S-1587 | [8] | BOLT (1/2-13X1.75-IN) | |
| 43. | 6V-0456 | [1] | BEARING AS-ROLLER | |
| 44. | 2B-2404 | [1] | CLIP | |
| 45. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 46. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 47. | 3T-8528 | [1] | WASHER (5-MM THK) | |
| 48. | 206-2080 | [1] | TUBE AS | |
| 49. | 052-0572 | [1] | TEE-SWIVEL | |
| 50. | 0S-1614 | [2] | BOLT (1/4-20X0.5-IN) | |
| 51. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 52. | 1A-5350 | [2] | CLIP | |
| 53. | 032-1267 C | [1] | CONNECTOR (STRAIGHT) | |
| 54. | 2N-1287 | [1] | ELBOW-FLARED | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP25900169
133-9649: GEAR GP-BEVEL & TRANSFER
133-9649 GEAR GP-BEVEL & TRANSFER
S/N 2ZY1-UP
PART OF 131-9269 TRANSMISSION AR
Type 3
S/N 2ZY1-UP
PART OF 131-9269 TRANSMISSION AR
Type 3
For full view, you need register
Parts for your 527 TRACK SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-0073 | [1] | CASE AS-TRANSMISSION | |
| 2. | 7T-8859 | [1] | CUP-BEARING | |
| 3. | 3L-9410 | [1] | CONE-BEARING | |
| 4. | 265-2109 | [1] | SET-BEVEL GEAR (31, 14-TEETH) | |
| 5. | 226-0931 | [1] | GEAR-TRANSFER (37-TEETH) | |
| 6. | 201-1282 BC | [1] | SHIM PACK (INCLUDES 25-SHIMS) | |
| 7. | 201-1281 C | [1] | COVER | |
| 8. | 3B-1915 | [6] | BOLT (3/8-16X1.375-IN) | |
| 9. | 6V-2404 | [1] | LOCKWASHER-BEARING | |
| 10. | 1L-6957 | [1] | LOCKNUT-BEARING | |
| 11. | 3T-9674 | [1] | RETAINER | |
| 12. | 0S-1599 | [1] | BOLT (1/2-20X2.75-IN) | |
| 13. | 205-4137 | [3] | CUP-BEARING | |
| 14. | 205-4138 | [3] | CONE-BEARING | |
| 15. | 2D-8009 | [1] | SEAL-O-RING | |
| 16. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 17. | 2J-6362 | [1] | BEARING | |
| 18. | 1T-0720 | [3] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 19. | 318-0106 | [1] | SEAL-LIP TYPE | |
| 20. | 317-8261 | [1] | CAGE-BEARING | |
| 21. | 108-8250 | [1] | CARRIER-SEAL | |
| 22. | 0S-1595 | [11] | BOLT (1/2-13X1.25-IN) | |
| 23. | 3T-9819 B | [1] | SHIM PACK (INCLUDES 19-SHIMS) | |
| 24. | 226-0930 | [1] | GEAR-TRANSFER (22-TEETH) | |
| 25. | 204-5341 | [1] | TEE | |
| 26. | 198-9162 | [1] | TUBE AS | |
| 27. | 032-1268 | [1] | CONNECTOR (90-DEG) | |
| 28. | 3T-0219 | [1] | RETAINER-BEARING | |
| 29. | 3T-8518 | [1] | CAGE-BEARING | |
| 30. | 200-8644 B | [2] | SHIM PACK (INCLUDES 24-SHIMS) | |
| 31. | 206-2963 | [1] | TUBE AS | |
| 32. | 8L-6557 | [1] | CONNECTOR | |
| 34. | 9W-3013 | [1] | SHAFT-BEVEL GEAR | |
| 35. | 5B-0841 | [20] | BOLT (5/8-18X1.75-IN) | |
| 36. | 5P-4921 | [1] | RACE-BEARING OUTER | |
| 37. | 5P-4920 | [1] | RACE & ROLLER AS | |
| 38. | 6T-7996 | [1] | TUBE AS | |
| 39. | 8D-0071 | [1] | TEE-FLARED | |
| 40. | 6T-7995 | [1] | TUBE AS | |
| 41. | 198-9163 | [1] | TUBE AS | |
| 42. | 0S-1587 | [8] | BOLT (1/2-13X1.75-IN) | |
| 43. | 6V-0456 | [1] | BEARING AS-ROLLER | |
| 44. | 2B-2404 | [1] | CLIP | |
| 45. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 46. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 47. | 3T-8528 | [1] | WASHER (5-MM THK) | |
| 48. | 206-2080 | [1] | TUBE AS | |
| 49. | 052-0572 | [1] | TEE-SWIVEL | |
| 50. | 0S-1614 | [2] | BOLT (1/4-20X0.5-IN) | |
| 51. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 52. | 1A-5350 | [2] | CLIP | |
| 53. | 032-1267 | [1] | CONNECTOR (STRAIGHT) | |
| 54. | 2N-1287 | [1] | ELBOW-FLARED | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
