AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

141-4041 MOUNTING GP-LIFT CYLINDER S/N 8EP1-UP PART OF 141-4035 BULLDOZER AR-ANGLING AN ATTACHMENT 527


HYDRAULIC SYSTEM
CYLINDER GP
PIN GP
PUMP GP
TANK GP
VALVE GP-CONTROL
VALVE GP-CHECK

TRACK SKIDDER 527 TRACK SKIDDER 3DS
 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2590 527 3DS   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-ANGLING
131-7192 CYLINDER GP-ANGLING
CYLINDER GP-HYDRAULIC
152-6485 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
152-6485 CYLINDER GP-HYDRAULIC
CYLINDER GP-LIFT
141-8640 CYLINDER GP-LIFT
CYLINDER GP-LIFT
6E-0367 CYLINDER GP-LIFT
CYLINDER GP-TILT
296-1451 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-9558 CYLINDER GP-TILT
MOUNTING GP-LIFT CYLINDER
141-4041 MOUNTING GP-LIFT CYLINDER
 

#SEBP25900320
 

141-4041: MOUNTING GP-LIFT CYLINDER

141-4041 MOUNTING GP-LIFT CYLINDER
S/N 8EP1-UP
PART OF 141-4035 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00580724 SEBP2590
1414041 MOUNTING GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-8654 [2] LINK AS  
2. 8T-8917 [6] BOLT (1/2-13X1.25-IN)  
3. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 4T-0231 [6] RETAINER  
5. 2B-2938 [2] PIN-CLEVIS  
6. 6S-6646 [2] PIN-COTTER  
7. 9W-9996 [2] BAR  
8. 8E-6537 [2] PIN AS  
9. 6S-3931 [6] WASHER  
10. 7X-0384 [2] BOLT (7/8-9X3-IN)  
11. 8G-5501 [1] HANDHOLD  
12. 5P-2228 [4] BOLT (1/2-13X1-IN)  
13. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
14. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
15. 8G-5428 [2] PIN  
16. 8E-6526 [2] BUSHING-TERMINAL  
17. 8E-6533 [1] SUPPORT AS  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
  8P-9770 [1] PLATE  
18. 8E-6523 [4] PIN  
19. 4J-0805 B [30] WASHER (1.781X2.5X0.12-IN THK)  
20. 3G-8891 [4] SPACER (45X50X18-MM THK)  
21. 8E-6532 [1] SUPPORT AS  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
  8P-9770 [1] PLATE  
22. 8G-5502 [1] HANDHOLD  
23. 3P-9111 [2] SPACER (23X41.3X19-MM THK)  
  B   USE AS REQUIRED
 

#SEBP25900321
 

6Y-8115: PIN GP-CYLINDER

6Y-8115 PIN GP-CYLINDER
S/N 7DH1-UP; 5HP1-UP; 3DS1-UP; BDW1-UP
PART OF 131-2224, 293-9000 BULLDOZER AR-ANGLING, 131-8430 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00395282 SEBP2590
6Y8115 PIN GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-8900 [2] PIN  
2. 4T-0231 [2] RETAINER  
3. 8C-4436 [2] BOLT (1/2-13X1.375-IN)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 4J-0805 [6] WASHER (1.781X2.5X0.12-IN THK)  
 

#SEBP25900322
 

6E-5052: PUMP GP-PISTON

6E-5052 PUMP GP-PISTON -IMPLEMENT
S/N 3DS1-UP; BDW1-UP
SLIPPER
PART OF 141-4036 HYDRAULIC AR, 129-7609, 131-0775, 379-7868 HYDRAULIC AR-MACHINE
ALSO AN ATTACHMENT
i00401147 SEBP2590
6E5052 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6572 [1] SHAFT  
2. 6E-6573 [1] BEARING  
3. 6E-4224 [1] PLUG-SWASHPLATE  
4. 033-6036 [1] SEAL-O-RING  
5. 6E-6574 [1] HEAD  
6. 9T-1699 [1] SPRING  
7. 9T-1710 [1] POPPET  
8. 9T-1636 [1] SEAT  
9. 6E-6575 [1] COVER  
10. 6V-8837 M [3] BOLT (M6X1X16-MM)  
11. 1P-8362 [1] SEAL-O-RING  
12. 6E-6576 [1] BEARING  
13. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
14. 6E-2943 [1] PLUG  
15. 095-0888 [2] PIN-SPRING  
16. 9T-3038 B [1] SHIM PACK  
17. 6V-5684 M [4] BOLT (M12X1.75X45-MM)  
18. 9S-4185 [1] PLUG (3/4-16-THD)  
19. 3K-0360 [1] SEAL-O-RING  
20. 6E-6568 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
21. 6V-8336 M [1] BOLT (M12X1.75X70-MM)  
22. 8T-5039 [3] SEAL-O-RING  
23. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
24. 6E-6577 [1] HOUSING  
25. 005-0469 [1] CUP-BEARING  
26. 6E-6578 [1] KIT-PISTON BIAS  
    (INCLUDES SPRING, ROD, PISTON & SEAL)
27. 6E-6579 [1] SPRING-BIAS  
28. 6E-6569 Y [1] ROTATING GP-PUMP  
29. 6E-6580 [1] GASKET  
30. 6V-3922 [2] SEAL-O-RING  
31. 3E-7417 [4] PLUG  
32. 8T-7876 [4] SEAL-O-RING  
33. 9T-3030 [1] PLATE  
34. 111-6800 [1] CONE-BEARING  
35. 111-6801 [1] CUP-BEARING  
36. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
37. 6E-6581 [1] SPACER  
38. 9T-1652 [1] PIN  
39. 6E-6582 [1] KIT-PISTON CONTROL  
    (INCLUDES ROD, PISTON & SEAL)
40. 6E-6583 [1] SWASHPLATE GP  
  8F-7219 [2] SEAL-O-RING  
  139-0532 [2] BLOCK-STOP  
41. 008-3214 [2] RING-RETAINING (INTERNAL)  
42. 3E-6776 [2] SEAL-LIP TYPE  
43. 005-0471 [1] CONE-BEARING  
44. 5F-3106 A [1] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25900323
 

6E-6569: ROTATING GP-PUMP

6E-6569 ROTATING GP-PUMP -IMPLEMENT
S/N 3DS1-UP; BDW1-UP
PART OF 6E-5052 PUMP GP-PISTON
ALSO AN ATTACHMENT
i00403042 SEBP2590
6E6569 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 002-3455 [1] RING-RETAINING  
2. 9T-3025 [1] GUIDE  
3. 3T-0849 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 6E-6584 [2] PLATE-SPACER  
5. 6E-6585 [2] PLATE-LIMITER  
6. 9T-3018 [9] PISTON AS  
7. 9T-3021 [1] GUIDE  
8. 9T-3023 [1] SPRING  
9. 9T-3026 [1] BARREL  
10. 9T-3019 [1] PLATE  
  M   METRIC PART
 

#SEBP25900324
 

129-7623: TANK & FILTER GP-HYDRAULIC

129-7623 TANK & FILTER GP-HYDRAULIC
S/N 3DS1-UP; BDW1-UP
PART OF 141-4036 HYDRAULIC AR, 129-7609, 131-0775, 379-7868 HYDRAULIC AR-MACHINE
ALSO AN ATTACHMENT
i00498005 SEBP2590
1297623 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-6913 [1] RETAINER  
2. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
3. 9T-0714 [1] PLATE  
4. 4J-8252 [1] GAUGE-SIGHT (HYDRAULIC TANK)  
5. 4J-8251 [1] GROMMET  
6. 8J-8782 [1] BODY-DRAIN VALVE (HYDRAULIC TANK)  
7. 9J-7031 [1] PLUG-DRAIN (HYDRAULIC TANK OIL)  
8. 5M-2057 [1] SEAL-O-RING  
9. 5P-1075 [47] WASHER-HARD (10.2X22.5X3-MM THK)  
10. 8M-4436 [1] SEAL-O-RING  
11. 8J-8783 [1] VALVE-DRAIN  
12. 1U-2827 [1] GUIDE-VALVE  
13. 7B-3039 [1] SPRING  
14. 2J-7761 [1] RING-RETAINING  
15. 5D-1911 [1] COVER-HYDRAULIC CAP  
16. 1L-5072 [1] DOWEL  
17. 9M-7394 [1] LEVER  
18. 4B-9782 [1] BALL  
19. 6H-5139 [1] PLATE-PRESSURE  
20. 7H-1447 [1] CAP-FILLER (HYDRAULIC OIL)  
21. 9H-6454 [1] GASKET  
22. 3G-0361 [1] GASKET  
23. 9J-3047 [1] STRAINER (HYDRAULIC TANK OIL)  
24. 4F-7952 [1] SEAL-O-RING  
25. 9T-0819 [1] SHIELD  
26. 8J-8468 [1] VALVE  
27. 3G-3267 [1] SCREEN AS (HYDRAULIC TANK OIL)  
28. 9J-2914 [1] SPACER  
29. 1R-0735 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)  
    -OR-
  104-6931 A [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)  
    -OR-
  139-1537 A [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
30. 9T-3264 [1] COVER  
31. 8F-9206 [1] SEAL-O-RING  
32. 4T-0521 [1] BOLT (5/8-11X17.1-IN)  
33. 6V-9633 [1] GASKET  
34. 8J-8322 [1] RING-RETAINING  
35. 8J-8436 [1] TUBE AS  
36. 8J-8443 [1] SPRING  
37. 4K-0367 [1] NUT-FULL (5/8-11-THD)  
38. 4T-2654 [1] ELBOW  
39. 4T-4145 [1] VALVE-BREAKER RELIEF  
40. 3D-2824 [1] SEAL-O-RING  
41. 6V-8801 [4] NUT (3/8-16-THD)  
42. 133-8896 [1] TANK AS  
43. 4T-2646 [1] GASKET  
44. 4T-2647 [1] COVER  
45. 323-2172 [1] BRACKET AS  
46. 030-8535 [4] BOLT-LOCKING (3/8-16X0.875-IN)  
47. 2K-4973 [37] LOCKNUT (3/8-16-THD)  
  A   NOT PART OF THIS GROUP
 

#SEBP25900325
 

6E-4781: VALVE GP-BANK

6E-4781 VALVE GP-BANK -BULLDOZER
S/N 3DS344-UP; BDW1-UP
PART OF 131-0775 HYDRAULIC AR-MACHINE
ALSO AN ATTACHMENT
i00400770 SEBP2590
6E4781 VALVE GP-BANK Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5653 Y [1] VALVE GP-MAKEUP (IMPLEMENT PILOT OIL)  
2. 6E-4955 Y [1] VALVE GP-CONTROL (BULLDOZER LIFT)  
3. 6E-4953 Y [1] VALVE GP-CONTROL (BULLDOZER TILT)  
4. 6E-4954 Y [1] VALVE GP-CONTROL (BLADE ANGLE)  
5. 139-0238 [1] COVER-END  
6. 4T-4518 [3] STUD (3/8-16X8.52-IN)  
7. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
8. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 4T-2723 B [12] SHIM (0.076-MM THK)  
10. 4D-9986 [8] SEAL-O-RING  
11. 4J-5267 [4] SEAL-O-RING  
12. 4J-5140 [4] SEAL-O-RING  
13. 9S-8008 [2] PLUG (1-1/16-12-THD)  
14. 3D-2824 [2] SEAL-O-RING  
15. 9S-8005 [1] PLUG (3/4-16-THD)  
16. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25900326
 

6E-4781: VALVE GP-BANK

6E-4781 VALVE GP-BANK -BULLDOZER
S/N 3DS1-UP; BDW1-UP
PART OF 131-0775 HYDRAULIC AR-MACHINE
ALSO AN ATTACHMENT
i00919747 SEBP2590
6E4781 VALVE GP-BANK Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-6695 CY [1] VALVE GP-MAKEUP (IMPLEMENT PILOT OIL)  
2. 6E-4955 Y [1] VALVE GP-CONTROL (BULLDOZER LIFT)  
3. 6E-4953 Y [1] VALVE GP-CONTROL (BULLDOZER TILT)  
4. 6E-4954 Y [1] VALVE GP-CONTROL (BLADE ANGLE)  
5. 139-0238 [1] COVER-END  
6. 4T-4518 [3] STUD (3/8-16X8.52-IN)  
7. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
8. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 4T-2723 B [12] SHIM (0.076-MM THK)  
10. 4D-9986 [8] SEAL-O-RING  
11. 4J-5267 [4] SEAL-O-RING  
12. 4J-5140 [4] SEAL-O-RING  
13. 9S-8008 [2] PLUG (1-1/16-12-THD)  
14. 3D-2824 [2] SEAL-O-RING  
15. 9S-8005 [1] PLUG (3/4-16-THD)  
16. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25900327
 

131-7177: VALVE GP-BANK 2

131-7177 VALVE GP-BANK 2 -BULLDOZER
S/N 3DS1-343
PART OF 129-7609 HYDRAULIC AR-MACHINE
Type 1
i00510497 SEBP2590
1317177 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5653 Y [1] VALVE GP-MAKEUP (IMPLEMENT PILOT OIL)  
2. 6E-4955 Y [1] VALVE GP-CONTROL (BULLDOZER LIFT)  
3. 6E-4954 Y [1] VALVE GP-CONTROL (BLADE ANGLE)  
4. 139-0238 [1] COVER-END  
5. 4T-4538 [3] STUD (3/8-16-THD)  
6. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
7. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 4T-2723 [9] SHIM (0.076-MM THK)  
9. 4D-9986 [6] SEAL-O-RING  
10. 4J-5267 [3] SEAL-O-RING  
11. 4J-5140 [3] SEAL-O-RING  
12. 9S-8008 [2] PLUG (1-1/16-12-THD)  
13. 3D-2824 [2] SEAL-O-RING  
14. 9S-8005 [1] PLUG (3/4-16-THD)  
15. 3K-0360 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25900328
 

131-7177: VALVE GP-BANK 2

131-7177 VALVE GP-BANK 2 -BULLDOZER
S/N 3DS1-343
PART OF 129-7609 HYDRAULIC AR-MACHINE
Type 2
i00813831 SEBP2590
1317177 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-6695 YC [1] VALVE GP-MAKEUP (IMPLEMENT PILOT OIL)  
2. 6E-4955 Y [1] VALVE GP-CONTROL (BULLDOZER LIFT)  
3. 6E-4954 Y [1] VALVE GP-CONTROL (BLADE ANGLE)  
4. 139-0238 [1] COVER-END  
5. 4T-4538 [3] STUD (3/8-16-THD)  
6. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
7. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 4T-2723 [9] SHIM (0.076-MM THK)  
9. 4D-9986 [6] SEAL-O-RING  
10. 4J-5267 [3] SEAL-O-RING  
11. 4J-5140 [3] SEAL-O-RING  
12. 9S-8008 [2] PLUG (1-1/16-12-THD)  
13. 3D-2824 [2] SEAL-O-RING  
14. 9S-8005 [1] PLUG (3/4-16-THD)  
15. 3K-0360 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25900329
 

6E-4701: VALVE GP-CHECK

6E-4701 VALVE GP-CHECK
S/N 3DS1-UP; BDW1-UP
PART OF 134-9641 CONTROL GP-WINCH
AN ATTACHMENT
i00400580 SEBP2590
6E4701 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 527 TRACK SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 [1] SEAL-O-RING  
2. 6V-8397 [1] SEAL-O-RING  
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 527 :

MOUNTING GP-CONTROL VALVE
379-7869 MOUNTING GP-CONTROL VALVE
MOUNTING GP-CONTROL VALVE
135-1983 MOUNTING GP-CONTROL VALVE
LINES GP-TILT CYLINDER
8G-7711 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
379-2043 LINES GP-TILT CYLINDER
LINES GP-PUMP
379-2040 LINES GP-PUMP
LINES GP-PUMP
129-7621 LINES GP-PUMP
LINES GP-LIFT CYLINDER
8G-4442 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
379-2042 LINES GP-LIFT CYLINDER
PIN GP-CYLINDER
6Y-8115 PIN GP-CYLINDER
PUMP GP-PISTON
6E-5052 PUMP GP-PISTON
ROTATING GP-PUMP
6E-6569 ROTATING GP-PUMP
TANK & FILTER GP-HYDRAULIC
129-7623 TANK & FILTER GP-HYDRAULIC
VALVE GP-BANK
6E-4781 VALVE GP-BANK
VALVE GP-BANK
6E-4781 VALVE GP-BANK
VALVE GP-BANK 2
131-7177 VALVE GP-BANK 2
VALVE GP-BANK 2
131-7177 VALVE GP-BANK 2

Truck sale:

Caterpillar 527, skidder, Forestry equipment
173,742 
Caterpillar 527, skidder, Forestry equipment
- skidder
FINNING CANADA
Caterpillar 527GROEM, skidder, Forestry equipment
369,700 
Caterpillar 527GROEM, skidder, Forestry equipment
- skidder
PETERSON CAT
Caterpillar 527, Forestry Equipment
195,000 USD 
Caterpillar 527, Forestry Equipment
- skidder
WESTERN STATES EQUIPMENT
Caterpillar 527GR, Forestry Equipment
209,122 
Caterpillar 527GR, Forestry Equipment
- skidder
FINNING CANADA
Canada
Caterpillar 527, Forestry Equipment
 
Caterpillar 527, Forestry Equipment
- skidder
PETERSON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.