WORK TOOLS
GRAPPLE GPWINCH GP
HYDRAULIC SYSTEM
VALVE GP-CONTROLSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSPROTECTION GP
WORK TOOLS
GRAPPLE GP#SEBP25900420
133-8772: INSTALLATION AR-GRAPPLE
133-8772 INSTALLATION AR-GRAPPLE
S/N 3DS1-UP; BDW1-UP
FIXED GRAPPLE
PART OF 133-9172 INSTALLATION AR-WINCH
AN ATTACHMENT
S/N 3DS1-UP; BDW1-UP
FIXED GRAPPLE
PART OF 133-9172 INSTALLATION AR-WINCH
AN ATTACHMENT
For full view, you need register
#SEBP25900421
133-7500: INSTALLATION AR-WINCH
133-7500 INSTALLATION AR-WINCH
S/N 3DS1-UP; BDW1-UP
PART OF 279-5054 MACHINE AR
AN ATTACHMENT
S/N 3DS1-UP; BDW1-UP
PART OF 279-5054 MACHINE AR
AN ATTACHMENT
For full view, you need register
Parts for your 527 TRACK SKIDDER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 134-1247 Y | [1] | FASTENER GP-HYDRAULIC LINES | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25900422
133-9172: INSTALLATION AR-WINCH
For full view, you need register
Parts for your 527 TRACK SKIDDER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 134-9641 Y | [1] | CONTROL GP-WINCH | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25900423
8E-3350: VALVE GP-WINCH
8E-3350 VALVE GP-WINCH
S/N 3DS1-UP; BDW1-UP
PART OF 134-9641 CONTROL GP-WINCH
AN ATTACHMENT
S/N 3DS1-UP; BDW1-UP
PART OF 134-9641 CONTROL GP-WINCH
AN ATTACHMENT
For full view, you need register
Parts for your 527 TRACK SKIDDER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-0360 | [1] | SEAL-O-RING | |
| 2. | 9S-8007 | [4] | PLUG | |
| 3. | 7J-0204 | [4] | SEAL-O-RING | |
| 4. | 3D-4245 | [2] | SEAL-O-RING | |
| 5. | 7T-5458 | [2] | BUSHING-SEAL | |
| 6. | 8C-5244 | [2] | SEAL-QUAD RING | |
| 7. | 4J-4051 | [1] | SPRING | |
| 8. | 5M-6242 | [2] | COVER | |
| 9. | 4F-9029 | [2] | SEAL | |
| 10. | 2P-9271 | [1] | SPOOL-CONTROL | |
| 11. | 8E-2057 | [1] | PISTON-LOCKUP SELECTOR | |
| 12. | 7G-4876 | [1] | SLUG | |
| 13. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
| 14. | 7S-4607 | [2] | DETENT AS | |
| 15. | 5J-1605 | [2] | COVER | |
| 16. | 5F-7054 | [2] | SEAL-O-RING | |
| 17. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 18. | 3J-1907 | [3] | SEAL-O-RING | |
| 19. | 0S-1617 | [4] | BOLT (5/16-18X0.75-IN) | |
| 20. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 6N-8863 | [2] | WASHER (10.2X32X2.5-MM THK) | |
| 22. | 0T-0102 | [6] | BOLT (3/8-16X0.625-IN) | |
| 23. | 9S-8004 | [1] | PLUG (9/16-18-THD) |
#SEBP25900424
134-3020: FILM GP
134-3020 FILM GP
S/N 3DS1-UP; BDW1-UP
PART OF 279-5054 MACHINE AR, 132-4525 PLATE & FILM GP
ALSO AN ATTACHMENT
S/N 3DS1-UP; BDW1-UP
PART OF 279-5054 MACHINE AR, 132-4525 PLATE & FILM GP
ALSO AN ATTACHMENT
For full view, you need register
#SEBP25900425
292-4505: FILM GP
For full view, you need register
Parts for your 527 TRACK SKIDDER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | FILM-STRIPE (CAT 527, RH) | ||
| 2. | [1] | FILM-STRIPE (CAT 527, LH) | ||
| 3. | 9X-2433 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | |
#SEBP25900426
339-6231: FILM GP
339-6231 FILM GP
S/N H4G1-UP
PART OF 129-8177 ENGINE AR
FOR USE WITH 3300 CAPTIVE ENGINES BUILT AT CIPL-PSD
S/N H4G1-UP
PART OF 129-8177 ENGINE AR
FOR USE WITH 3300 CAPTIVE ENGINES BUILT AT CIPL-PSD
For full view, you need register
Parts for your 527 TRACK SKIDDER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7E-8050 | [1] | FILM GP (EPA CERTIFICATION) | ||
| INSTALL ON TOP OF VALVE COVER TOWARDS FRONT OF ENGINE READABLE FROM RIGHT HAND SIDE OF ENGINE IF POSSIBLE, | ||||
| OR LEFT HAND SIDE OF BLOCK JUST ABOVE ENGINE INFO LABEL. | ||||
| INSTALL LAMINANT ON TOP OF FILM. | ||||
| 115-5852 | [1] | PLATE & FILM GP (ENGINE INFORMATION) | ||
| INSTALL ON LEFT HAND REAR SIDE OF BLOCK. | ||||
| INSTALL LAMINANT OVER SILVER FILM. | ||||
| 3N-3790 | [1] | PLATE-SERIAL NUMBER (ENGINE) | ||
| INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON CAST PAD ON UPPER LEFT HAND SIDE OF CYLINDER BLOCK. | ||||
| STAMP SERIAL NUMBER IN CYLINDER BLOCK JUST BELOW SERIAL NUMBER PLATE IN CHARACTERS SIZE 6 MM HIGH. | ||||
| 274-7398 | [1] | TAG-INFORMATION (CRANKCASE, NO OIL) | ||
| INSTALL 'NO OIL' TAG AS REQUIRED ON ENGINES SHIPPED WITHOUT OIL IN THE CRANKCASE. | ||||
| ATTACH WITH WIRE TO OIL GAGE RING HANDLE, OR ONTO OIL FILLER CAP T-HANDLE, NECESSARY TO BE EASILY VISIBLE ON ENGINE. | ||||
#SEBP25900427
132-4525: PLATE & FILM GP
For full view, you need register
Parts for your 527 TRACK SKIDDER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | FILM GP | ||
| -OR- | ||||
| Y | [1] | FILM GP | ||
| 239-6986 | [1] | PLATE-SERIAL NUMBER (MACHINE) | ||
| (ON LH REAR OF CASE) | ||||
| 3N-3790 A | [1] | PLATE-SERIAL NUMBER (ENGINE) | ||
| (ON CAST PAD ON UPPER LH SIDE OF CYLINDER BLOCK) | ||||
| 4B-4158 A | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 127-8830 | [2] | FILM-IDENTIFICATION (EQUALIZER BAR LUBRICATION) | ||
| (ON RH & LH CASE AND FRAME SIDEPLATE ABOVE EQUALIZER BAR) | ||||
| 334-4603 | [1] | FILM-INFORMATION (HYDO ADVANCED 10) | ||
| (ON TOP OF TANK ADJACENT TO HYDRAULIC TANK FILLER SPOUT) | ||||
| 114-0931 | [1] | FILM-IDENTIFICATION (SERVICE CONNECTOR) | ||
| (ON FUSE BOX NEXT TO DIAGNOSTIC CONNECTOR) | ||||
| 3E-8108 | [1] | FILM-IDENTIFICATION (TRANSMISSION OIL LEVEL) | ||
| (ON INSIDE CENTER OF FORWARD LH ENCLOSURE GROUP DOOR) | ||||
| 3E-8110 | [1] | FILM-IDENTIFICATION (TRANSMISSION, PARKING BRAKE) | ||
| (ON RH SIDE OF LEVER ON TRANSMISSION & PARKING BRAKE LOCK GUARD) | ||||
| 7X-7644 | [5] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| 1-(BY FRONT TOWING EYE) | ||||
| 1-(AT REAR HITCH CLEVIS (WINCH ONLY)) | ||||
| 2-(ON RH & LH SIDE OF TRACK ROLLER FRAME, CENTERED BETWEEN FRONT & REAR IDLERS) | ||||
| 2-(ABOVE EACH EYE OF SWING BOOM (ON SWING BOOM GRAPPLE ONLY)) | ||||
| 148-3027 | [2] | FILM-INSTRUCTION (FUEL SHUTOFF) | ||
| LOCATE ON LH SIDE OF MACHINE ABOVE TRACK AS FOLLOWS: | ||||
| 1-(ON EXTERIOR SIDE OF ACCESS DOOR) | ||||
| 1-(ON INTERIOR SIDE OF ACCESS DOOR) | ||||
| 7X-3229 | [4] | FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION) | ||
| (ON RH & LH SIDE OF TRACK ROLLER FRAME BETWEEN FRONT IDLER AND ROLLER AND BETWEEN REAR IDLER AND ROLLER) | ||||
| 225-0312 | [1] | FILM-WARNING (JUMP START, READ OMM, INTL) | ||
| (ON INSIDE CENTER OF LH REAR ENCLOSURE GROUP DOOR, BATTERY ACCESS DOOR) | ||||
| A | NOT PART OF THIS GROUP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25900428
134-9651: PROTECTION AR-VANDALISM
134-9651 PROTECTION AR-VANDALISM
S/N 3DS1-UP; BDW1-UP
FOR USE WITH OPEN ROPS MACHINES ONLY
AN ATTACHMENT
S/N 3DS1-UP; BDW1-UP
FOR USE WITH OPEN ROPS MACHINES ONLY
AN ATTACHMENT
For full view, you need register
Parts for your 527 TRACK SKIDDER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-8502 | [1] | PADLOCK GP | ||
| (RADIATOR FILL ACCESS DOOR) | ||||
| 5P-8502 | [2] | PADLOCK GP | ||
| (FUEL SYSTEM FILL CAP & DRAIN VALVE) | ||||
| 5P-8502 | [1] | PADLOCK GP | ||
| (FUEL SYSTEM FILL SCREEN DOOR) | ||||
| 5P-8502 | [1] | PADLOCK GP | ||
| (HYDRAULIC TANK FILLER CAP) | ||||
| (EACH PADLOCK GP INCLUDES) | ||||
| 5P-8500 A | [1] | KEY | ||
| 8Y-6364 A | [1] | SLEEVE | ||
| 4W-1686 Y | [1] | PROTECTION GP-VANDALISM (OIL FILLER & OIL LEVEL GAUGE) | ||
| A | NOT PART OF THIS GROUP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25900429
4W-1686: PROTECTION GP-VANDALISM
4W-1686 PROTECTION GP-VANDALISM
S/N 3DS1-UP; BDW1-UP
OIL FILLER & OIL LEVEL GAUGE
PART OF 134-9651 PROTECTION AR-VANDALISM
AN ATTACHMENT
S/N 3DS1-UP; BDW1-UP
OIL FILLER & OIL LEVEL GAUGE
PART OF 134-9651 PROTECTION AR-VANDALISM
AN ATTACHMENT
For full view, you need register
Parts for your 527 TRACK SKIDDER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-8502 | [1] | PADLOCK GP | |
| 5P-8500 A | [2] | KEY | ||
| 8Y-6364 A | [1] | SLEEVE | ||
| 2. | 103-6012 | [1] | HASP AS | |
| 3. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 4. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 5. | 8T-2502 | [1] | BOLT (3/8-16X1.125-IN) | |
| A | NOT PART OF THIS GROUP | |||
