4P-9858 GEAR GP-FRONT S/N 13Z36792-UP TIMING PART OF 116-7567, 136-9004, 139-5531, 141-4836, 145-3275, 187-0773 ENGINE AR ALSO AN ATTACHMENT 330B L

BASIC ENGINE

GEAR GP

0. 4P-9858 GEAR GP-FR

HOUSING GP-FLYWHEEL

1. 8N-2395 HOUSING GP

GEAR GP

2. 8N-0303 HOUSING GP

CYLINDER HEAD GP

3. 398-9357 KIT-CYLIND
4. 391-8256 KIT-CYLIND
5. 447-8653 KIT-CYLIND

SERVICE EQUIPMENT AND SUPPLIES

KIT-REBUILD

6. 20R-1428 KIT-ENGINE
7. 20R-1454 KIT-ENGINE
8. 393-2643 KIT-ENGINE
9. 398-0453 KIT-ENGINE
0. INFORMATION

EXCAVATOR 330B L EXCAVATOR 3YR
330B L, 330B LN Excavators 3YR00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2592 330B L 3YR (1996)

BASIC ENGINE

GEAR GP

4P-9858 GEAR GP-FRONT

8N-0303 HOUSING GP-FRONT

#SEBP25920050

4P-9858: GEAR GP-FRONT

GEAR GP-FRONT

4P-9858 GEAR GP-FRONT
S/N 13Z36792-UP
TIMING
PART OF 116-7567, 136-9004, 139-5531, 141-4836, 145-3275, 187-0773 ENGINE AR
ALSO AN ATTACHMENT

i00188777 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-2602	[1]	BOLT (5/8-11X2-IN)
2.	7N-2994	[1]	WASHER (49.3X16.25X12.3-MM THK)
3.	8N-4960	[1]	PLATE-THRUST
4.	0S-1618	[2]	BOLT (5/16-18X1-IN)
5.	170-7502	[1]	SHAFT-DRIVE IDLER
6.	0S-1748	[4]	BOLT (3/8-24X2-IN)
7.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	196-0224	[1]	GEAR AS-IDLER (50-TEETH)
	196-9988	[1]	BUSHING
9.	4P-7826	[1]	GEAR-CAMSHAFT (66-TEETH)
10.	4P-7822	[1]	WEIGHT AS
10A.	9N-5766	[2]	WEIGHT
10B.	1W-5879	[2]	SPRING (54.6MM LONG)
10C.	1W-5878	[2]	SPRING (35.7MM LONG)
10D.	9N-5767	[2]	SLIDE
10E.	9N-5765	[1]	PLATE-END
10F.	4B-1273	[2]	SCREW-MACHINE (10-24X0.5-IN)
10G.	8N-0498	[1]	SEAL-FACE
10H.	6F-4718	[1]	SEAL-O-RING
11.	0S-1594	[2]	BOLT (3/8-16X1-IN)
12.	196-0028	[1]	GEAR AS-IDLER (47-TEETH)
	195-0302	[1]	BUSHING
13.	5B-9079	[1]	NUT-JAM (3/8-24-THD)

#SEBP25920051

8N-2395: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

8N-2395 HOUSING GP-FLYWHEEL
S/N 13Z36792-UP
PART OF 116-7567, 136-9004, 139-5531, 141-4836, 145-3275, 187-0773 ENGINE AR
ALSO AN ATTACHMENT

i00429634 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0645 B	[1]	PLUG-CUP (32.08-MM OD)
2.	5F-0304	[2]	PLUG
	2A-1162	[2]	GASKET
3.	8T-6765	[1]	PLUG-PIPE (1/4-18-THD)
4.	7X-7730	[1]	PLUG-PIPE
5.	7X-7731	[1]	PLUG-PIPE (3/4-14-THD)
6.	1A-1460	[13]	BOLT (1/2-13X2-IN)
7.	9H-5921	[1]	GASKET
8.	143-0814	[1]	HOUSING-FLYWHEEL
9.	8S-0527 B	[1]	PLUG-CUP
10.	8T-6760	[1]	PLUG-PIPE (1-1/2-11-1/2 NPT)
	B		USE AS REQUIRED

#SEBP25920052

8N-0303: HOUSING GP-FRONT

HOUSING GP-FRONT

8N-0303 HOUSING GP-FRONT
S/N 13Z36792-UP
PART OF 116-7567, 136-9004, 139-5531, 141-4836, 145-3275, 187-0773 ENGINE AR
ALSO AN ATTACHMENT

i00189041 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0923	[1]	HOUSING AS-FRONT
2.	9X-2485	[6]	STUD
3.	1W-7816	[1]	PLATE AS
	5M-6214	[1]	PLUG (1/8-27 PTF)
4.	6H-0192	[3]	STUD
5.	8N-0110	[1]	GASKET-FRONT PLATE
6.	1W-3900	[1]	GASKET

#SEBP25920053

398-9357: KIT-CYLINDER HEAD

KIT-CYLINDER HEAD

398-9357 KIT-CYLINDER HEAD
S/N 3YR1-UP; 5LR1-UP
OPTIONAL REBUILD CYLINDER HEAD REBUILD KIT FOR 3306 ENGINE
FOR USE WITH @@@@@144-6303@@@@@, @@@@@122-9790@@@@@
FIELD INSTALLATION

i05267693 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
148-7425	[12]	GUIDE-VALVE (STANDARD)
154-6997 AB		GUIDE-VALVE (0.51-MM OS)
154-6998 AB		GUIDE-VALVE (0.13-MM OS)
107-0265	[6]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
AB		INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
107-0268	[6]	INSERT-VALVE SEAT (INLET)(STANDARD)
AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.25-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
2A-4429	[24]	LOCK-RETAINER
8T-6762	[3]	PLUG-PIPE (1/2-14-THD)
8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
1W-5300	[12]	ROTOCOIL AS
		(EACH INCLUDES)
6N-7174	[1]	SHIELD-OIL
7N-8018	[6]	SEAL
9Y-1798	[18]	SEAL
3S-5496	[2]	SEAL-O-RING
7S-7144	[12]	SPRING-VALVE
148-7455	[6]	VALVE-EXHAUST
100-7860	[6]	VALVE-INLET
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED

#SEBP25920054

391-8256: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

391-8256 KIT-CYLINDER HEAD GASKET
S/N 13Z36792-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FIELD REPLACEMENT FOR 142-0228 KIT-GASKET
FIELD INSTALLATION

i05106250 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8M-2295	[4]	BOLT (3/8-16X1.625-IN)
1H-7666	[1]	GASKET
1P-0451	[1]	GASKET (TURBOCHARGER)
1S-4295	[1]	GASKET (TURBOCHARGER)
5S-6735	[2]	GASKET
7N-0200	[1]	GASKET
7N-0944	[1]	GASKET (WATER TEMPERATURE REGULATOR)
8H-9788	[1]	GASKET
188-6126	[1]	GASKET
111-8015	[1]	GASKET AS-CYLINDER HEAD
2P-6132	[1]	GASKET-ELBOW
9S-7083	[1]	GASKET-INLET
9Y-1979	[3]	GASKET-MANIFOLD
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
115-7550	[1]	GASKET-PLATE
2N-2766	[4]	LOCKNUT (3/8-16-THD)
7N-8018	[6]	SEAL
9Y-1798	[18]	SEAL
2M-9780	[1]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
3S-5496	[2]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5M-5860	[2]	SEAL-O-RING
5H-7704	[2]	SEAL-O-RING
8H-2046	[1]	SEAL-O-RING
8M-4448	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING
133-1247	[1]	SEAL-VALVE COVER

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

#SEBP25920055

447-8653: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

447-8653 KIT-CYLINDER HEAD GASKET
S/N 3YR1-UP
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION

i06805368 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)


			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED

#SEBP25920056

20R-1428: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1428 KIT-ENGINE OVERHAUL
S/N 3YR425-UP; 5LR276-UP; 13Z40558-UP
(GOLD KIT OVERHAUL)
PART OF 139-5531, 145-3275 ENGINE AR, 144-6303, 148-0697 ENGINE AR-GENERAL
FOR USE WITH @@@@@122-9790@@@@@, @@@@@144-6303@@@@@, @@@@@116-7567@@@@@, @@@@@145-3275@@@@@, @@@@@148-0697@@@@@, @@@@@139-5531@@@@@, 3306 MACHINE ENGINE
ALSO AN ATTACHMENT

i04992091 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
393-2643 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

10R-3637	[6]	CYLINDER PACK AS
		(EACH INCLUDES)
6I-0497	[1]	RING-PISTON (OIL)
110-5800	[1]	LINER-CYLINDER BLOCK
156-8263	[1]	BODY AS-PISTON
7N-9805	[1]	PIN-PISTON
0R-0914	[1]	ROD AS-CONNECTING
1P-9956	[2]	BOLT-CONNECTING ROD
5S-6348	[2]	NUT (1/2-20-THD)
8N-1849	[1]	BEARING-CONNECTING ROD
1S-9543	[2]	RETAINER-PIN
2W-1707	[1]	RING-PISTON (TOP)
5P-8768 Y	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
5S-6750	[1]	RING-PISTON (INTERMEDIATE)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP25920057

20R-1454: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1454 KIT-ENGINE OVERHAUL
S/N 3YR425-UP; 5LR276-UP; 13Z40558-UP
(PLATINUM KIT OVERHAUL)
PART OF 139-5531, 145-3275 ENGINE AR, 144-6303, 148-0697 ENGINE AR-GENERAL
FOR USE WITH @@@@@122-9790@@@@@, @@@@@116-7567@@@@@, @@@@@144-6303@@@@@, @@@@@145-3275@@@@@, @@@@@148-0697@@@@@, @@@@@139-5531@@@@@, 3306 MACHINE ENGINE
ALSO AN ATTACHMENT

i04992337 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
393-2643 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

0R-2549	[1]	CYLINDER HEAD GP
5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5S-6735	[1]	GASKET
103-2454	[12]	SPRING-VALVE
100-7860	[6]	VALVE-INLET
148-7455	[6]	VALVE-EXHAUST
0R-0836	[1]	CYLINDER HEAD AS
8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
107-0265	[6]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
AB		INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
107-0268	[6]	INSERT-VALVE SEAT (INLET)(STANDARD)
AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.25-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
148-7425	[12]	GUIDE-VALVE (STANDARD)
154-6997 AB		GUIDE-VALVE (0.51-MM OS)
154-6998 AB		GUIDE-VALVE (0.13-MM OS)
3B-0623	[6]	PLUG-CUP
3B-0645	[7]	PLUG-CUP (32.08-MM OD)
3P-1896	[13]	PLUG-CUP (35.31-MM OD)
8N-4485	[1]	VALVE AS-VENT
8T-6762	[3]	PLUG-PIPE (1/2-14-THD)
0S-1594	[4]	BOLT (3/8-16X1-IN)
1P-6367	[1]	COVER
1W-5300	[12]	ROTOCOIL AS
		(EACH INCLUDES)
6N-7174	[1]	SHIELD-OIL
2A-4429	[24]	LOCK-RETAINER
0R-1002	[1]	PUMP GP-WATER
8N-5929	[1]	COVER-WATER PUMP
115-7559	[1]	GEAR-WATER PUMP (33-TEETH)
172-0038	[1]	GASKET
176-1250	[1]	PUMP GP-WATER
172-5189	[1]	IMPELLER-PUMP
172-5185	[1]	SHAFT-WATER PUMP
1K-6985	[1]	RING-RETAINING
6H-3957	[1]	BALL BEARING
8T-6765	[1]	PLUG-PIPE (1/4-18-THD)
154-4482	[1]	SEAL-LIP TYPE
169-1750	[1]	SEAL GP
208-4836	[1]	KIT-GASKET (WATER PUMP)
2P-0406	[1]	GASKET
2P-6132	[1]	GASKET-ELBOW
5F-3106	[1]	SEAL-O-RING
7N-0200	[1]	GASKET
9M-4849	[1]	SEAL-O-RING
0L-1351	[2]	BOLT (3/8-16X0.875-IN)
3B-8428	[1]	BOLT (7/16-14X3.25-IN)
4S-9191	[1]	WASHER (12X22.5X5-MM THK)
5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8H-9789	[1]	BALL BEARING
0R-0920	[1]	PUMP GP-ENGINE OIL
9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	[1]	BODY AS-OIL PUMP
8S-6511	[2]	BUSHING
	[1]	BODY AS-OIL PUMP
8S-6511	[2]	BUSHING
6N-1036	[2]	GEAR (8-TEETH)
8S-0493	[1]	SHAFT AS-PUMP
8S-0490	[1]	SHAFT
2P-1781	[1]	SPACER (0.24-MM THK)
4B-9880	[1]	BALL
4N-3732	[1]	COVER-VALVE
4P-3546	[1]	VALVE AS-RELIEF (ENGINE OIL PUMP)
6I-1345	[1]	SHAFT AS-OIL PUMP
0T-0065	[3]	BOLT (3/8-16X3.5-IN)
1B-8709	[1]	KEY-WOODRUFF
1F-1006	[1]	DOWEL
2B-2694	[1]	BOLT (5/16-18X2-IN)
2P-1170	[1]	SHAFT AS-GEAR
4B-9782	[1]	BALL

10R-3637	[6]	CYLINDER PACK AS
		(EACH INCLUDES)
6I-0497	[1]	RING-PISTON (OIL)
110-5800	[1]	LINER-CYLINDER BLOCK
156-8263	[1]	BODY AS-PISTON
7N-9805	[1]	PIN-PISTON
0R-0914	[1]	ROD AS-CONNECTING
1P-9956	[2]	BOLT-CONNECTING ROD
5S-6348	[2]	NUT (1/2-20-THD)
8N-1849	[1]	BEARING-CONNECTING ROD
1S-9543	[2]	RETAINER-PIN
2W-1707	[1]	RING-PISTON (TOP)
5P-8768 Y	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
5S-6750	[1]	RING-PISTON (INTERMEDIATE)
104-9453	[6]	NOZZLE AS-FUEL VALVE
		(EACH INCLUDES)
7W-4486	[1]	WASHER (9.76X17.14X1.8-MM THK)
9L-9098	[1]	SEAL-CARBON STOP
114-3362	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP25920058

393-2643: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

393-2643 KIT-ENGINE OVERHAUL
S/N 3YR425-UP; 5LR276-UP; 13Z40558-UP
(BRONZE KIT OVERHAUL)
PART OF 139-5531, 145-3275 ENGINE AR, 144-6303, 148-0697 ENGINE AR-GENERAL, 20R-1428, 20R-1454, 398-0453 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@144-6303@@@@@, @@@@@122-9790@@@@@, @@@@@116-7567@@@@@, @@@@@145-3275@@@@@, @@@@@148-0697@@@@@, @@@@@139-5531@@@@@, REHS7766, 3306 MACHINE ENGINE
ALSO AN ATTACHMENT

i04992158 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
281-0029 Y	[6]	KIT-GASKET (SINGLE FUEL INJECTOR SEALS)
392-5434 Y	[1]	KIT-GASKET (FRONT STRUCTURE)
392-5441 Y	[1]	KIT-GASKET (CENTRAL, LOWER STRUCTURE)
393-1165 Y	[1]	KIT-TURBOCHARGER GASKET

328-5572	[6]	BEARING-CONNECTING ROD (STANDARD)
3E-6914	[6]	BOLT (3/8-16X0.87-IN)
9L-2295	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)
2W-9162	[1]	BREATHER AS (CRANKCASE)
7M-4046	[4]	BUSHING
394-8206	[1]	BUSHING
8N-4110	[1]	BUSHING
394-8207	[1]	BUSHING
195-0302	[1]	BUSHING
374-8364	[1]	BUSHING
196-9988	[1]	BUSHING
374-8353	[1]	BUSHING
5P-0597	[2]	CLAMP-HOSE
5P-2230	[2]	CLAMP-HOSE
8T-4983	[2]	CLAMP-HOSE
8T-4984	[2]	CLAMP-HOSE
8T-6703	[2]	CLAMP-HOSE
1R-1807	[1]	FILTER AS-ENGINE OIL (ADVANCED EFFICIENCY)
9M-2341	[1]	FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)
1R-0750	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
1P-0451	[1]	GASKET
380-7572	[1]	GASKET-TURBOCHARGER
4M-6480	[1]	GASKET
6I-2002	[1]	GASKET
7N-9520	[1]	GASKET
131-6645	[1]	HOSE
4N-9216	[1]	HOSE-AIR
392-0164	[1]	KIT-GASKET (OIL COOLER, LINES)
2A-3541	[1]	GASKET
2M-5407	[1]	GASKET
2S-0795	[2]	GASKET
	[1]	GASKET
2W-4561	[1]	GASKET
3D-2824	[2]	SEAL-O-RING
3P-1155	[2]	SEAL-O-RING
4N-3841	[1]	GASKET
5M-4741	[2]	GASKET
5P-8118	[2]	SEAL-O-RING
8S-5409	[2]	GASKET
9M-6974	[2]	GASKET
114-2687	[2]	SEAL-O-RING
6V-2982	[1]	KIT-GASKET (REAR STRUCTURE)
2A-1162	[2]	GASKET
383-3682	[1]	GASKET
4H-7869	[1]	GASKET
391-1100	[1]	GASKET
4M-5469	[1]	GASKET
4W-0452	[1]	SEAL GP-CRANKSHAFT (COUNTERCLOCKWISE ROTATION)
9H-5921	[1]	GASKET
208-4836	[1]	KIT-GASKET (WATER PUMP)
2P-0406	[1]	GASKET
2P-6132	[1]	GASKET-ELBOW
5F-3106	[1]	SEAL-O-RING
7N-0200	[1]	GASKET
9M-4849	[1]	SEAL-O-RING
380-7575	[1]	KIT-GASKET (WATER PUMP)
392-4638	[1]	KIT-GASKET (SINGLE CYLINDER HEAD)
1N-9372	[1]	GASKET-FLANGE (AIR INLET)
1P-0451	[1]	GASKET
380-7572	[1]	GASKET-TURBOCHARGER
2N-2766	[4]	LOCKNUT (3/8-16-THD)
2P-6132	[1]	GASKET-ELBOW
3S-5496	[2]	SEAL-O-RING
5H-7704	[2]	SEAL-O-RING
5M-5860	[2]	SEAL-O-RING
5S-6735	[2]	GASKET
6L-1648	[2]	SEAL-O-RING
7L-9061	[1]	SEAL-O-RING
7N-0200	[1]	GASKET
7N-0944	[1]	GASKET
7N-8018	[6]	SEAL
8H-2046	[1]	SEAL-O-RING
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)
8H-9788	[1]	GASKET
8M-4448	[1]	SEAL-O-RING
9L-2295	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)
9Y-1798	[18]	SEAL
379-0165	[1]	SEAL
9Y-1979	[3]	GASKET-MANIFOLD
111-8015	[1]	GASKET AS-CYLINDER HEAD
279-4977	[1]	GASKET AS-CYLINDER HEAD
115-7550	[1]	GASKET-PLATE
133-1247	[1]	SEAL-VALVE COVER
188-6126	[1]	GASKET
388-0654	[1]	GASKET
0L-0364	[2]	LOCK
8S-1491	[1]	LOCK
2N-2766	[12]	LOCKNUT (3/8-16-THD)
8S-8874	[1]	LOCKNUT
5B-9079	[1]	NUT-JAM (3/8-24-THD)
4B-3938	[2]	PLUG-CUP
6V-3508	[2]	PLUG-CUP
8T-6757	[6]	PLUG-PIPE
111-8010	[1]	REGULATOR-WATER TEMPERATURE
9H-1113	[2]	RING-RETAINING
2J-0157	[1]	SEAL-O-RING
2M-9780	[2]	SEAL-O-RING
3J-1907	[7]	SEAL-O-RING
3J-7354	[2]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
4J-8997	[1]	SEAL-O-RING
4M-8303	[1]	SEAL-O-RING
5F-7054	[1]	SEAL-O-RING
5P-6718	[1]	SEAL-O-RING
7L-9061	[1]	SEAL-O-RING
8M-5248	[2]	SEAL-O-RING
061-7539	[1]	SEAL-O-RING
061-9458	[1]	SEAL-O-RING
214-7567	[1]	SEAL-O-RING
8H-2778	[1]	SEAL-RING
1M-7643	[1]	SPACER (10.5X25.4X18.21-MM THK)
6B-7469	[1]	SPACER (0.406X0.875X0.875-IN THK)
8M-3182	[2]	SPRING
6V-1426	[9]	STUD-TAPERLOCK (3/8-16X2.75-IN, HIGH TEMP)
6V-1427	[2]	STUD-TAPERLOCK (3/8-16X3.54-IN)
9L-1658	[1]	STUD-TAPERLOCK (3/8-16X2.598-IN)
106-1793	[1]	STUD-TAPERLOCK (3/8-16X2.36-IN)
8M-7145	[11]	WASHER (10.2X28.5X5-MM THK)
117-3035	[12]	WASHER
5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5P-8244	[1]	WASHER-HARD (12X22.5X2.5-MM THK)
8T-4896	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
134-0641	[1]	WASHER-HARD (10.2X28.5X5-MM THK)
7N-0550	[2]	WASHER-SPRING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
Y		SEPARATE ILLUSTRATION

#SEBP25920059

398-0453: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

398-0453 KIT-ENGINE OVERHAUL
S/N 3YR425-UP; 5LR276-UP; 13Z40558-UP
(SILVER KIT OVERHAUL)
PART OF 139-5531, 145-3275 ENGINE AR, 144-6303, 148-0697 ENGINE AR-GENERAL
FOR USE WITH @@@@@122-9790@@@@@, @@@@@144-6303@@@@@, @@@@@116-7567@@@@@, @@@@@145-3275@@@@@, @@@@@148-0697@@@@@, @@@@@139-5531@@@@@, 3306 MACHINE ENGINE
ALSO AN ATTACHMENT

i04992369 SEBP2592

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
393-2643 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
5P-8768 Y	[1]	KIT-GASKET (SINGLE CYLINDER LINER)

1S-9543	[12]	RETAINER-PIN
2W-1707	[6]	RING-PISTON (TOP)
5S-6750	[6]	RING-PISTON (INTERMEDIATE)
6I-0497	[6]	RING-PISTON (OIL)
371-5941	[6]	LINER-CYLINDER
156-8263	[6]	BODY AS-PISTON

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION