FUEL SYSTEM
PUMP GP-FUEL PRIMINGPUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER
GOVERNOR GP
TANK GP-FUEL
VALVE GP-CHECK
ELECTRICAL AND STARTING SYSTEM
ALARM GPFUEL SYSTEM
PUMP GP-FUEL PRIMING#SEBP25930120
129-3230: PUMP GP-FUEL PRIMING
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 183-2824 CY | [1] | PUMP GP-FUEL PRIMING (MANUAL) | |
2. | 9Y-1760 | [1] | BRACKET-PRIMING PUMP | |
3. | 7X-2537 M | [1] | BOLT (M8X1.25X35-MM) | |
4. | 8T-4183 M | [1] | BOLT (M12X1.75X40-MM) | |
5. | 113-0454 I | [1] | HOSE AS | |
6. | 6V-8724 | [1] | ELBOW | |
7. | 3J-1907 | [4] | SEAL-O-RING | |
8. | 6V-8397 | [2] | SEAL-O-RING | |
9. | 8T-0151 | [1] | ADAPTER | |
10. | 5P-4924 | [1] | ELBOW | |
11. | 6V-8636 | [1] | CONNECTOR | |
12. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
13. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
14. | 129-3231 | [1] | BRACKET AS | |
8T-3597 M | [1] | NUT-WELD (M12X1.75-THD) | ||
8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
C | CHANGE FROM PREVIOUS TYPE | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25930121
183-2824: PUMP GP-FUEL PRIMING
183-2824 PUMP GP-FUEL PRIMING -MANUAL
S/N 4TF28805-UP
S/N 4TF28805-UP
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SIS#SEBP25930122
108-9845: PUMP GP-FUEL TRANSFER
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 103-2556 E | HOSE (400CM) | ||
1A. | 103-2556 E | HOSE (175CM) | ||
2. | 140-0559 | [1] | SUPPORT AS | |
3. | 123-3929 Y | [1] | PUMP & MOTOR GP-FUEL TRANSFER | |
4. | 006-5707 | [1] | ELBOW-PIPE | |
5. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
6. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
7. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
8. | 120-5114 | [1] | FILM-INSTRUCTION (REFUELING PUMP) | |
9. | 2S-3440 | [4] | CLAMP-HOSE | |
10. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
11. | 4P-7581 | [3] | CLIP (LADDER) | |
12. | 122-4021 | [1] | COVER | |
13. | 5C-6108 Y | [1] | SWITCH GP-REFUELING (FUEL TANK SHUTOFF) | |
14. | 8T-4179 M | [4] | BOLT (M12X1.75X20-MM) | |
15. | 140-0580 | [1] | VALVE AS | |
16. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
17. | 105-6701 | [3] | CONNECTOR-HOSE | |
18. | 5P-8309 D | SEAL (.6M) | ||
19. | 7K-1181 | [3] | STRAP-CABLE | |
D | ORDER BY THE METER | |||
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25930123
108-9845: PUMP GP-FUEL TRANSFER
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 103-2556 E | HOSE (400CM) | ||
1A. | 103-2556 E | HOSE (175CM) | ||
2. | 140-0559 | [1] | SUPPORT AS | |
3. | 165-1436 Y | [1] | PUMP & MOTOR GP-FUEL TRANSFER | |
4. | 006-5707 | [1] | ELBOW-PIPE | |
5. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
6. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
7. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
8. | 120-5114 | [1] | FILM-INSTRUCTION (REFUELING PUMP) | |
9. | 2S-3440 | [4] | CLAMP-HOSE | |
10. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
11. | 4P-7581 | [3] | CLIP (LADDER) | |
12. | 122-4021 | [1] | COVER | |
13. | 5C-6108 Y | [1] | SWITCH GP-REFUELING (FUEL TANK SHUTOFF) | |
14. | 8T-4179 M | [4] | BOLT (M12X1.75X20-MM) | |
15. | 140-0580 | [1] | VALVE AS | |
16. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
17. | 105-6701 | [3] | CONNECTOR-HOSE | |
18. | 7X-7877 E | STRIP-EDGE (53CM) | ||
19. | 7K-1181 | [3] | STRAP-CABLE | |
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25930124
127-2308: SEPARATOR GP-WATER
127-2308 SEPARATOR GP-WATER
S/N 1ZS1-UP; 2ES1-UP
S/N 1ZS1-UP; 2ES1-UP
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3K-8460 | [2] | PLUG (1/2-20-THD) | |
2. | 117-4089 | [1] | ELEMENT-WATER SEPARATOR | |
3. | 118-1461 | [1] | BASE AS | |
4. | 118-8118 | [1] | RING-RETAINING | |
5. | 118-8119 | [1] | NUT | |
6. | 5P-7814 | [2] | SEAL-O-RING | |
7. | 112-9401 | [1] | BOWL AS-WATER COLLECTION | |
128-8614 | [1] | KIT-SEAL (WATER SEPARATOR) | ||
AVAILABLE REPAIR KIT(S): | ||||
121-4480 | [1] | KIT-WATER BASE (WATER SEPARATOR) | ||
(INCLUDES PLUGS, SEALS, RETAINING RING, & CAPS) |
#SEBP25930125
123-2381: SUPPORT GP-GOVERNOR CONTROL
123-2381 SUPPORT GP-GOVERNOR CONTROL
S/N 4TF28805-UP
S/N 4TF28805-UP
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 119-0614 | [1] | BRACKET AS | |
2. | 319-4253 | [1] | SUPPORT AS | |
3. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
4. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
5. | 6V-9804 M | [2] | BOLT (M8X1.25X75-MM) | |
6. | 8T-6912 M | [2] | BOLT (M8X1.25X50-MM) | |
7. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
M | METRIC PART |
#SEBP25930126
122-3996: TANK & MTG GP-FUEL
122-3996 TANK & MTG GP-FUEL
S/N 1ZS1-UP; 2ES1-UP
S/N 1ZS1-UP; 2ES1-UP
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SIS#SEBP25930127
122-3997: TANK GP-FUEL
122-3997 TANK GP-FUEL
S/N 1ZS1-UP; 2ES1-UP
S/N 1ZS1-UP; 2ES1-UP
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | [1] | TANK AS-FUEL | ||
3. | 9P-7121 | [1] | STRAINER-FUEL (FUEL TANK) | |
4. | 7Y-2398 | [1] | GAUGE GP-SIGHT (FUEL LEVEL) | |
4I-0123 | [1] | PIPE | ||
7Y-4754 | [2] | BLOCK | ||
094-3247 M | [2] | BOLT (M10X1.5X36-MM) | ||
095-1514 | [4] | SEAL-O-RING | ||
095-1517 | [4] | SEAL-O-RING | ||
5. | 2S-3440 | [1] | CLAMP-HOSE | |
6. | 087-3832 | [1] | CAP | |
7. | 4I-0378 | [1] | GASKET-RUBBER | |
8. | 095-0736 M | [5] | SCREW-MACHINE (M5X0.8X10-MM) | |
9. | 8T-0328 | [5] | WASHER-HARD (5.5X10X1-MM THK) | |
10. | 105-9911 | [1] | SENSOR GP-LIQUID LEVEL | |
11. | 9S-6130 | [1] | PLUG | |
12. | 2S-4078 | [1] | SEAL-O-RING | |
13. | 3B-0551 | [2] | PLUG-PIPE | |
14. | 004-6683 | [1] | FITTING | |
15. | 4I-0379 | [1] | VALVE-MANUAL | |
16. | 003-7764 | [2] | END-HOSE | |
17. | 095-1388 | [1] | CLAMP-HOSE | |
18. | 103-2529 E | HOSE (18CM) | ||
19. | 128-4411 | [1] | VALVE AS (FUEL SHUTOFF) | |
20. | 120-5170 | [1] | COVER AS | |
21. | 8T-4192 M | [6] | BOLT (M12X1.75X25-MM) | |
22. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
23. | 7X-7700 | [1] | CAP AS-FUEL (LOCKABLE, VENTED) | |
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART |
#SEBP25930128
129-1101: VALVE GP-CHECK
129-1101 VALVE GP-CHECK -FUEL
S/N 4TF28805-UP
S/N 4TF28805-UP
Parts for your 322B LN EXCAVATOR:
CATERPILLAR SIS#SEBP25930129
111-4696: ALARM GP-TRAVEL
Information:
FUEL SYSTEM
PUMP GP-FUEL PRIMING
Truck Engine News
Engine News
Operation and Maintenance Manual
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Letter-NACD
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-Australia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-CFEL
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Service Letter-China
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-Asia
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-APD
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Testing and Adjusting
Disassembly and Assembly
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine