AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

167-7310 BOOM AR-1 PIECE SHORT S/N 1ZS1-UP; 2ES1-UP AN ATTACHMENT 322B LN EXCAVATOR


IMPLEMENTS
BOOM GP

EXCAVATOR 322B LN EXCAVATOR 1ZS
 322B L & 322B LN Excavators 1ZS00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2593 322B LN 1ZS   (1996)

IMPLEMENTS

BOOM GP
137-2369 BOOM AR
203-6233 BOOM AR
167-7310 BOOM AR-1 PIECE SHORT
150-1484 BOOM AR-VARIABLE ADJUSTABLE
BOOM GP
117-5522 BOOM GP
BOOM GP
117-5526 BOOM GP
 

#SEBP25930660
 

167-7310: BOOM AR-1 PIECE SHORT

167-7310 BOOM AR-1 PIECE SHORT
S/N 1ZS1-UP; 2ES1-UP
AN ATTACHMENT
i02327411 SEBP2593
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  176-2233 Y [1] BOOM GP  
  177-2437 Y [1] CYLINDER & LINES GP-BOOM (LH)  
  177-2438 Y [1] CYLINDER & LINES GP-BOOM (RH)  
  177-2441 Y [1] CYLINDER & LINES GP-STICK  
  134-0567 Y [1] LIGHTING GP-BOOM  
    -OR-
  204-9088 Y [1] LIGHTING GP-BOOM  
  176-4634 Y [1] LINES GP-BOOM  
  176-2234 Y [1] LINES GP-GREASE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25930661
 

150-1484: BOOM AR-VARIABLE ADJUSTABLE

150-1484 BOOM AR-VARIABLE ADJUSTABLE
S/N 1ZS1-UP; 2ES1-UP
AN ATTACHMENT
i00862820 SEBP2593
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  150-0789 Y [1] BOOM GP-FORE  
  6C-6833 Y [1] BOOM GP-STUB  
  109-6031 Y [1] CONTROL GP-HYDRAULIC PEDAL (AUXILIARY)  
  118-4115 Y [1] CYLINDER & LINES GP-BOOM  
  118-4118 Y [1] CYLINDER & LINES GP-BOOM  
  6C-6054 Y [1] CYLINDER & SEAL GP-BOOM  
  118-4121 Y [1] CYLINDER & SEAL GP-STICK  
  3E-9819 [1] FILM-INSTRUCTION (FORE BOOM CONTROLS)  
    (LOCATED NEAR LEFT FOOT PEDAL)
  3E-9820 [1] FILM-INSTRUCTION (HYDRAULIC OIL LEVEL)  
    (LOCATED ON HYDRAULIC TANK)
  148-5178 Y [1] LIGHTING GP-BOOM  
  115-9809 Y [1] LINES GP-BOOM  
  150-4376 Y [1] LINES GP-FRONT  
  115-9808 Y [1] LINES GP-GREASE  
  138-4250 Y [1] LINES GP-PILOT  
  116-3023 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
    (LOCATED ON CHECK VALVE ON VA CYLINDER)
  147-6664 Y [1] WIRING GP-ADJUSTABLE BOOM  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25930662
 

117-5522: BOOM GP

117-5522 BOOM GP
S/N 1ZS1-UP; 2ES1-UP
AN ATTACHMENT
i00555156 SEBP2593
1175522 BOOM GP Parts scheme
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-2891 [1] BOOM & BEARING AS  
1A. 137-2817 [2] BUSHING  
2. 9X-4597 [2] SEAL-LIP TYPE  
3. 101-2208 [1] PIN  
4. 7Y-2390 [2] PLATE  
5. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
6. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
8. 093-0349 [2] WASHER (22X60X6-MM THK)  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1-MM THK)  
  093-0115 B [1] SHIM (2-MM THK)  
  133-2425 B [1] SHIM (0.5-MM THK)  
11. 093-0366 [1] SPACER (93X130X12-MM THK)  
12. 102-3196 [1] PIN AS  
13. 093-0084 B [2] SHIM (1-MM THK)  
  113-2127 B [1] SHIM (0.5-MM THK)  
  093-0116 B [1] SHIM (2-MM THK)  
14. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
15. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
16. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
17. 093-0363 [1] SPACER (83X120X12-MM THK)  
18. 087-5955 [2] SPACER (93X130X8-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25930663
 

117-5526: BOOM GP

117-5526 BOOM GP
S/N 1ZS1-UP; 2ES1-UP
PART OF 120-4960 BOOM AR
AN ATTACHMENT
i00473567 SEBP2593
1175526 BOOM GP Parts scheme
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-2894 [1] BOOM & BEARING AS  
2. 137-2817 [2] BUSHING  
3. 101-2208 [1] PIN  
4. 7Y-2390 [2] PLATE  
5. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
6. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
8. 093-0349 [2] WASHER (22X60X6-MM THK)  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1-MM THK)  
11. 093-0115 B [1] SHIM (2-MM THK)  
12. 103-5150 [1] PIN AS  
13. 093-0084 B [2] SHIM (1-MM THK)  
14. 113-2127 B [1] SHIM (0.5-MM THK)  
15. 093-0116 B [1] SHIM (2-MM THK)  
16. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
17. 093-0363 [1] SPACER (83X120X12-MM THK)  
18. 087-5955 [2] SPACER (93X130X8-MM THK)  
19. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
20. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
21. 133-2425 B [1] SHIM (0.5-MM THK)  
22. 9X-4597 [2] SEAL-LIP TYPE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25930664
 

144-2649: BOOM GP

144-2649 BOOM GP
S/N 1ZS1-UP; 2ES1-UP
AN ATTACHMENT
i00633670 SEBP2593
1442649 BOOM GP Parts scheme
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-2509 [1] BOOM & BEARING AS  
  128-9864 [2] BUSHING  
2. 9X-4597 [2] SEAL-LIP TYPE  
3. 101-2208 [1] PIN  
4. 7Y-2390 [2] PLATE  
5. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
6. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
8. 093-0349 [2] WASHER (22X60X6-MM THK)  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1-MM THK)  
11. 093-0115 B [1] SHIM (2-MM THK)  
12. 102-3196 [1] PIN AS  
13. 093-0084 B [2] SHIM (1-MM THK)  
14. 113-2127 B [1] SHIM (0.5-MM THK)  
15. 093-0116 B [1] SHIM (2-MM THK)  
16. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
17. 093-0363 [1] SPACER (83X120X12-MM THK)  
18. 087-5955 [2] SPACER (93X130X8-MM THK)  
19. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
20. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
21. 093-0366 [1] SPACER (93X130X12-MM THK)  
22. 133-2425 B [1] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25930665
 

176-2233: BOOM GP

176-2233 BOOM GP
S/N 1ZS1-UP; 2ES1-UP
5.3-M (17.4-FT)
PART OF 167-7310 BOOM AR-1 PIECE SHORT
AN ATTACHMENT
i01395830 SEBP2593
1762233 BOOM GP Parts scheme
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-4809 [1] PIN AS  
2. 7Y-2390 [2] PLATE  
3. 093-0116 B [2] SHIM (2-MM THK)  
4. 093-0349 [2] WASHER (22X60X6-MM THK)  
5. 093-0363 B [1] SPACER (83X120X12-MM THK)  
6. 093-0366 B [1] SPACER (93X130X12-MM THK)  
7. 250-2408 [1] PIN AS  
8. 113-2127 B [1] SHIM (0.5-MM THK)  
9. 166-1487 B [4] SHIM (2-MM THK)  
10. 166-1496 [2] SEAL-LIP TYPE  
11. 180-7752 [1] PIN  
12. 186-5705 [1] BOOM & BEARING AS  
12A. 180-7576 [2] BUSHING  
13. 087-5955 [2] SPACER (93X130X8-MM THK)  
14. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
15. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
17. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
18. 093-0084 B [2] SHIM (1-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25930666
 

150-0789: BOOM GP-FORE

150-0789 BOOM GP-FORE
S/N 1ZS1-UP; 2ES1-UP
AN ATTACHMENT
i00940961 SEBP2593
1500789 BOOM GP-FORE Parts scheme
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-0790 [1] BOOM & BEARING AS  
1A. 137-2819 [2] BUSHING  
2. 7X-4803 [2] SEAL-LIP TYPE  
3. 093-0084 B [4] SHIM (1-MM THK)  
4. 7Y-2497 B [2] SHIM (1.6-MM THK)  
5. 093-0116 B [2] SHIM (2-MM THK)  
6. 113-2963 [1] PIN AS  
7. 093-0366 [1] SPACER (93X130X12-MM THK)  
8. 8T-4780 M [3] BOLT (M20X2.5X30-MM)  
9. 093-0349 [3] WASHER (22X60X6-MM THK)  
10. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
11. 4I-4618 [1] PIN AS  
12. 093-0363 [1] SPACER (83X120X12-MM THK)  
13. 093-0083 B [2] SHIM (1-MM THK)  
14. 7Y-2498 B [1] SHIM (1.6-MM THK)  
15. 093-0115 B [1] SHIM (2-MM THK)  
16. 103-5150 [1] PIN AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25930667
 

203-6234: BOOM GP-FORE

203-6234 BOOM GP-FORE
S/N 1ZS1-UP; 2ES1-UP
Type 1
AN ATTACHMENT
i01540489 SEBP2593
2036234 BOOM GP-FORE Parts scheme
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-0134 [1] BOOM & BEARING AS  
1A. 163-3744 [2] BUSHING  
2. 7X-4803 [2] SEAL-LIP TYPE  
3. 113-2127 B [1] SHIM (0.5-MM THK)  
4. 166-1487 [4] SHIM (2-MM THK)  
5. 093-0116 B [1] SHIM (2-MM THK)  
6. 113-2963 [1] PIN AS  
7. 093-0366 [1] SPACER (93X130X12-MM THK)  
8. 8T-4780 M [3] BOLT (M20X2.5X30-MM)  
9. 093-0349 [3] WASHER (22X60X6-MM THK)  
10. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
11. 4I-4618 [1] PIN AS  
12. 093-0363 [1] SPACER (83X120X12-MM THK)  
13. 103-5150 [1] PIN AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25930668
 

203-6234: BOOM GP-FORE

203-6234 BOOM GP-FORE
S/N 1ZS1-UP; 2ES1-UP
Type 2
AN ATTACHMENT
i02187158 SEBP2593
2036234 BOOM GP-FORE Parts scheme
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-0134 [1] BOOM & BEARING AS  
1A. 163-3744 [2] BUSHING  
2. 7X-4803 [2] SEAL-LIP TYPE  
3. 113-2127 B [1] SHIM (0.5-MM THK)  
4. 166-1487 [4] SHIM (2-MM THK)  
5. 093-0116 B [1] SHIM (2-MM THK)  
6. 113-2963 [1] PIN AS  
7. 093-0366 [1] SPACER (93X130X12-MM THK)  
8. 8T-4780 M [3] BOLT (M20X2.5X30-MM)  
9. 093-0349 [3] WASHER (22X60X6-MM THK)  
10. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
11. 131-8552 C [1] PIN AS  
12. 093-0363 [1] SPACER (83X120X12-MM THK)  
13. 250-2408 [1] PIN AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP25930669
 

203-6235: BOOM GP-STUB

203-6235 BOOM GP-STUB
S/N 1ZS1-UP; 2ES1-UP
AN ATTACHMENT
i01540468 SEBP2593
2036235 BOOM GP-STUB Parts scheme
  For full view, you need register

Parts for your 322B LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-0106 [1] BOOM & BEARING AS  
1A. 180-7576 [2] BUSHING  
2. 113-2963 B [1] PIN AS  
3. 093-0116 B [2] SHIM (2-MM THK)  
4. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
5. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
6. 093-0349 [2] WASHER (22X60X6-MM THK)  
7. 093-0366 [2] SPACER (93X130X12-MM THK)  
8. 250-2402 [1] PIN AS  
9. 7Y-2390 [2] PLATE  
10. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
11. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 087-5955 [2] SPACER (93X130X8-MM THK)  
13. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
14. 8T-6757 [1] PLUG-PIPE  
15. 113-2127 B [2] SHIM (0.5-MM THK)  
16. 166-1496 [2] SEAL-LIP TYPE  
17. 180-7752 [1] PIN  
18. 166-1487 [4] SHIM (2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Boom Base Pins - Lubricate
320B, 322B and 325B Excavators
Boom, Stick and Bucket Linkage - Lubricate
320B, 322B and 325B Excavators
Acceptable Boom/Stick/Bucket Combinations
320B, 322B and 325B Excavators
Torque for Expandable Pins - If Equipped
320B, 322B and 325B Excavators
Boom and Stick Linkage - Lubricate
320B, 320B L, 320B LN, 322B L and 322B LN Excavators Supplement
Demolition Boom Installation
320B, 322B, 325B, 330B and 345B Excavators
Demolition Boom Removal
320B, 322B, 325B, 330B and 345B Excavators
Special Instruction
Strengthening Baffles in Boom Assemblies{6501}
Strengthening Baffles in Boom Assemblies{6501}
Reinforcing Mass Booms (M) and Reach Booms (R){6501, 6501}
Reinforcing Mass Booms (M) and Reach Booms (R){6501, 6501}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE BOOMS ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE BOOMS ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BEARING JOINTS ON CERTAIN 320B, 320C, 322B, 322C, 325C AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BEARING JOINTS ON CERTAIN 320B, 320C, 322B, 322C, 325C AND 330C EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE BOOMS ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE BOOMS ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BEARING JOINTS ON CERTAIN 320B, 320C, 322B, 322C, 325C AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BEARING JOINTS ON CERTAIN 320B, 320C, 322B, 322C, 325C AND 330C EXCAVATORS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE BOOMS ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE BOOMS ON CERTAIN 320B, 322B, 325B AND 330B EXCAVATORS
Technical Information Bulletin
The Sleeve Bearings In The Front Linkage May Wear Prematurely On Certain Excavators
The Sleeve Bearings In The Front Linkage May Wear Prematurely On Certain Excavators
Specifications
Boom - 5900 mm (232.3 inch)
322B Excavator Machine System Attachment Specifications
Boom - 5300 mm (208.7 inch)
322B Excavator Machine System Attachment Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BEARING JOINTS ON CERTAIN 320B, 320C, 322B, 322C, 325C AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BEARING JOINTS ON CERTAIN 320B, 320C, 322B, 322C, 325C AND 330C EXCAVATORS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Boom
322B & 322B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
New Bearings In The Boom, Stick, And Boom Cylinder Assemblies Improve Linkage Pin Service Life{6501,6502}
1997/10/20
Use Bearing Puller Adapters For Removing Various Size Bearings{6500,6501,6502,6505,6509,6516}
1998/03/09
Procedures To Strengthen Baffles In Boom Assemblies Are Now Available{6501}
1998/12/28
Special Instruction, REHS0546, "Procedure to Reinforce Mass Booms and Reach Booms Is Available" {6501, 6501, 6501, 6501}
2000/03/13
New Oversize Pins Are Available for the Boom, the Stick, and the Bucket Pin Joints {6108, 6501, 6502, 6516, 6521, 6535, 6536}
2003/02/17

Caterpillar Parts SIS Catalog 322B LN :

203-6233 BOOM AR
137-2369 BOOM AR
120-4960 BOOM AR
120-4959 BOOM AR
VALVE GP-TRAVEL COUNTERBALANCE
137-3718 VALVE GP-TRAVEL COUNTERBALANCE
VALVE GP-SOLENOID
7Y-5005 VALVE GP-SOLENOID
VALVE GP-SOLENOID
352-7176 VALVE GP-SOLENOID
VALVE GP-SOLENOID
156-9513 VALVE GP-SOLENOID
150-1484 BOOM AR-VARIABLE ADJUSTABLE
BOOM GP
117-5522 BOOM GP
BOOM GP
117-5526 BOOM GP
BOOM GP
144-2649 BOOM GP
BOOM GP
176-2233 BOOM GP
BOOM GP-FORE
150-0789 BOOM GP-FORE
BOOM GP-FORE
203-6234 BOOM GP-FORE
BOOM GP-FORE
203-6234 BOOM GP-FORE

Truck sale:

2001 CAT 322BLN
USD $43,396 
2001 CAT 322BLN

EXIM MAQUINARIA S.L.
2001 CAT 322BLN
Call 
2001 CAT 322BLN

MAQUINARIA ALBOREA
1998 CAT 322BLN
Call 
1998 CAT 322BLN

GUAINVILLE INTERNATIONAL
LIMAY, France
2001 CAT 322BLN
Call 
2001 CAT 322BLN

GERL Baumaschinen Handel - AUSTRIA
Haid, Austria, Austria
2001 CAT 322BLN
USD $36,895 
2001 CAT 322BLN

Equippo AG
Zug, Zug, Switzerland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.