8W-5623 TIRE GP 37.5-39 52PR R-LUG EIA E-3 AN ATTACHMENT 651E WHEEL SCRAPER

Pos.	Part No	Qty	Parts name
1.	4D-6172	[4]	FLANGE
2.	137-2428 C	[2]	SEAL GP-DUO-CONE
3.	8W-9332	[2]	WHEEL AS
			(EACH INCLUDES)
	2G-7781	[1]	SEALANT
	1B-5174	[1]	PLUG-PIPE
5.	8W-9581	[2]	BAND AS
6.	2A-7116	[2]	RING-LOCK
7.	3D-1964	[2]	SEAL-O-RING
8.	8C-4436	[16]	BOLT (1/2-13X1.375-IN)
9.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	4J-1253	[2]	SEAL-O-RING
11.	4D-4325	[4]	CUP-BEARING
12.	4D-4324	[4]	CONE-BEARING
13.	2D-1692	[2]	SEAL-O-RING
14.	2G-7004	[2]	RETAINER
15.	3B-0551	[2]	PLUG-PIPE
16.	4J-1255	[2]	CAP-HUB
17.	0L-1169 C	[20]	BOLT (5/8-11X3.75-IN)
18.	5P-8247	[20]	WASHER-HARD (17X32X3.5-MM THK)
19.	4D-5738 B	[2]	SHIM PACK (INCLUDES 14-SHIMS)
20.	9D-0523 Y	[2]	VALVE GP-TIRE
21.	3K-0360	[2]	SEAL-O-RING
23.	221-6985	[2]	RETAINER
24.	8L-9241	[2]	SEAL-O-RING
25.	5T-1116	[2]	HOUSING AS
			(EACH INCLUDES)
	4B-8353	[1]	PIN
26.	1D-4637	[68]	BOLT (1-8X3.25-IN)
28.	5P-8250	[68]	WASHER (28X49X5-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP25960045

4T-7202: FENDER GP

FENDER GP

4T-7202 FENDER GP
PART OF 8X-0935 CHASSIS AR, 147-4653 SCRAPER AR

i00148657 SEBP2596

For full view, you need register

Parts for your 651E WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9399	[36]	BOLT (3/4-10X2.25-IN)
	6V-8182	[36]	NUT (3/4-10-THD)
	8T-4994 C	[64]	WASHER-HARD (20X36.5X3.5-MM THK)
2.	4T-7119	[1]	BRACKET (RH)
	4T-7120	[1]	BRACKET (LH)
3.	8W-4846	[2]	BRACKET AS
4.	4T-7200	[1]	FENDER AS
	038-8454	[3]	BAR
	4T-7201	[1]	FENDER AS (LH)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP25960046

129-4410: FRAME GP-DRAFT

FRAME GP-DRAFT

129-4410 FRAME GP-DRAFT
S/N 5XR207-UP
PART OF 132-8921 CHASSIS AR

i00148789 SEBP2596

For full view, you need register

Parts for your 651E WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	129-4411	[1]	FRAME AS
1A.	4T-2189	[2]	BUSHING
1B.	159-2738	[2]	BUSHING
1C.	5J-8118	[2]	BUSHING
1D.	3G-9967	[2]	BUSHING-TERMINAL
1E.	5J-8065	[2]	BUSHING
1F.	3G-9968	[2]	BUSHING-TERMINAL
1G.	7J-3617	[2]	BUSHING
2.	1U-0138	[2]	PIN AS
4.	8T-5361	[156]	WASHER-HARD (28X49X5-MM THK)
5.	9J-0896	[1]	BRACKET AS
	3J-2373	[1]	BUSHING
6.	4J-9773	[1]	PIN
7.	4J-9772	[2]	RETAINER
8.	5C-6565	[4]	BOLT (1/2-13X1.125-IN)
9.	7X-0437	[6]	BOLT (1-1/4-7X9.5-IN)(1/4-7X241.3MM)
10.	7X-0533	[12]	WASHER-HARD (34X55X6-MM THK)
11.	7X-0451	[6]	NUT-FULL (1-1/4-7-THD)
12.	8X-4913	[2]	ARM AS-DRAFT FRAME
			(EACH INCLUDES)
12A.	3J-3532	[2]	LUG
12B.	4T-0538	[1]	BEARING-ARM
12C.	8X-4914	[1]	SPREADER AS
13.	5M-3062	[4]	BOLT (3/8-16X0.75-IN)
14.	8M-7145	[4]	WASHER (10.2X28.5X5-MM THK)
15.	8T-8927	[24]	BOLT (1-8X3.75-IN)
16.	8X-4916	[2]	PLATE
17.	6V-8190	[72]	NUT (1-8-THD)
18.	3G-6077	[2]	SHOE-WEAR
19.	3G-6076 B	[4]	SHIM (3.5-MM THK)
20.	5P-9211	[12]	BOLT (5/8-11X2.75-IN)
21.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
22.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	1U-3582	[2]	TRUNNION
24.	1J-5929	[12]	BOLT (1-8X6-IN)
25.	8J-4155	[2]	CAP-BEARING
26.	7X-0410	[72]	BOLT (1-8X4-IN)
	B		USE AS REQUIRED

#SEBP25960047

1U-2869: FRAME GP-DRAFT

FRAME GP-DRAFT

1U-2869 FRAME GP-DRAFT
S/N 5XR1-206
PART OF 8X-0935 CHASSIS AR

i00148644 SEBP2596

For full view, you need register

Parts for your 651E WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-8927	[24]	BOLT (1-8X3.75-IN)
2.	1U-3582	[2]	TRUNNION
3.	8X-4913 C	[2]	ARM AS-DRAFT FRAME
			(EACH INCLUDES)
4.	8X-4914 C	[1]	SPREADER AS
5.	5M-3062 C	[4]	BOLT (3/8-16X0.75-IN)
	8M-7145 C	[4]	WASHER (10.2X28.5X5-MM THK)
	8X-4916 C	[2]	PLATE
6.	1U-0138	[2]	PIN AS
	3G-4434	[2]	PIN AS
7.	4T-8889	[1]	FRAME AS
8.	7J-3617	[2]	BUSHING
	8W-2854 A	[2]	BEARING (1.52-MM OS)
9.	5J-8118	[2]	BUSHING
10.	5J-8220	[2]	BUSHING
11.	4T-2189	[2]	BUSHING
12.	3G-9968	[2]	BUSHING-TERMINAL
13.	3G-9967	[2]	BUSHING-TERMINAL
14.	5J-8065	[2]	BUSHING
	8W-2850 A	[2]	BEARING (1.52-MM OS)
15.	6V-8190	[72]	NUT (1-8-THD)
16.	8T-5361	[156]	WASHER-HARD (28X49X5-MM THK)
17.	1J-5929	[12]	BOLT (1-8X6-IN)
18.	8J-4155	[2]	CAP-BEARING
19.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
20.	8W-2912	[1]	HOUSING-KINGBOLT
21.	3G-6077	[2]	SHOE-WEAR
	3G-6076 B	[4]	SHIM (3.5-MM THK)
22.	4J-9773	[1]	PIN
	4J-9772	[2]	RETAINER
	5C-6565	[4]	BOLT (1/2-13X1.125-IN)
23.	7X-0437	[6]	BOLT (1-1/4-7X9.5-IN)
24.	9J-0896	[1]	BRACKET AS
	3J-2373	[1]	BUSHING
25.	7X-0533	[12]	WASHER-HARD (34X55X6-MM THK)
26.	7X-0451	[6]	NUT-FULL (1-1/4-7-THD)
27.	5P-9211	[12]	BOLT (5/8-11X2.75-IN)
28.	7X-0410	[72]	BOLT (1-8X4-IN)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP25960048

523-8692: KIT-HITCH

KIT-HITCH

523-8692 KIT-HITCH
REFERTO SPECIAL INSTRUCTIONS SEBF8487 FOR REUSE AND SALVAGE GUIDELINES
FIELD INSTALLATION

i06880944 SEBP2596

For full view, you need register

Parts for your 651E WHEEL SCRAPER:

CATERPILLAR SIS

Part No	Qty	Parts name
1U-0151	[1]	BEARING
8W-2860 AB	[1]	BEARING (1.52-MM OS)
5T-6820	[1]	BEARING
8W-2858 AB	[1]	BEARING (1.52-MM OS)
8W-2848	[1]	BEARING (1.52-MM OS)
8W-2850	[1]	BEARING (1.52-MM OS)
8W-2851	[1]	BEARING (1.52-MM OS)
8W-2854	[1]	BEARING (1.52-MM OS)
8W-2856	[1]	BEARING (1.52-MM OS)
8W-2857	[1]	BEARING (1.52-MM OS)
8W-2858	[1]	BEARING (1.52-MM OS)
8W-2860	[1]	BEARING (1.52-MM OS)
119-1395	[1]	BEARING
119-1396	[1]	BEARING
1U-0145	[2]	BEARING-THRUST
0S-1595	[8]	BOLT (1/2-13X1.25-IN)
5C-6565	[12]	BOLT (1/2-13X1.125-IN)
7X-0346	[2]	BOLT (5/8-11X2-IN)
7X-0350	[1]	BOLT (5/8-11X3.5-IN)
7X-0372	[4]	BOLT (3/4-10X4.25-IN)
8C-6362	[3]	BOLT (5/8-11X2.75-IN)
8T-9393	[35]	BOLT (5/8-11X1.5-IN)
9D-3081	[6]	BOLT (5/8-11X1.5-IN)
5T-7888	[1]	BRACKET
141-5732	[1]	BRACKET AS
1U-0153	[1]	BUSHING
5J-8065	[1]	BUSHING
6G-3784	[1]	BUSHING
6G-3785	[1]	BUSHING
6G-6847	[1]	BUSHING
7J-3617	[1]	BUSHING
6G-7076	[2]	LINK AS
		(EACH INCLUDES)
3G-8243	[1]	SPACER (88.74X95.1X20-MM THK)
3G-8245	[4]	BUSHING
7K-9210	[6]	SEAL-LIP TYPE
145-1894	[2]	LOCK-YOKE
1K-6870	[2]	LOCKNUT (3/4-10-THD)
5P-9093	[1]	NUT (3-1/2-12-THD)
5F-2539	[1]	PIN
5T-6819	[1]	PIN
8X-0962	[4]	PIN
176-1402	[1]	PIN
5T-8687	[4]	PIN AS
142-2303	[1]	PIN AS
3B-4627	[1]	PIN-COTTER
5T-8525	[4]	PLATE
6G-8346	[1]	PLATE AS
5T-6821	[2]	RETAINER
6G-8511	[1]	RETAINER
8W-8707	[8]	RETAINER
2J-5846	[2]	RING
2H-3846	[1]	SEAL-LIP TYPE
6V-3261	[1]	SEAL-LIP TYPE
7X-4767	[1]	SEAL-LIP TYPE
7X-4769	[1]	SEAL-LIP TYPE
8W-9506	[1]	SPACER (90.5X140X3-MM THK)
5T-4649	[4]	SPACER-SPECIAL
5T-4648	[2]	STUD-TAPERLOCK (3/4-10-THD)
1U-0146	[2]	WASHER (83X165X4.85-MM THK)
8T-4122	[41]	WASHER-HARD (17X32X3.5-MM THK)
8T-4223	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4994	[4]	WASHER-HARD (20X36.5X3.5-MM THK)
9H-1024	[5]	WASHER-HARD (17X30X6-MM THK)
5J-8775	[3]	WASHER-THRUST (5.1X7.5X32-MM THK)
5J-8776	[1]	WASHER-THRUST (5.1X9.25X0.308-MM THK)
5J-8777	[1]	WASHER-THRUST (5.1X9.25X0.249-MM THK)
5J-8778	[1]	WASHER-THRUST (5.1X9.25X0.308-MM THK)
6G-6845	[8]	WASHER-THRUST (106X205X6.65-MM THK)
145-1896	[4]	YOKE
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED

#SEBP25960049

127-5130: LINES GP-LUBRICATION

LINES GP-LUBRICATION

127-5130 LINES GP-LUBRICATION
S/N 5XR207-UP
PART OF 147-4653 SCRAPER AR

i00148680 SEBP2596

1275130 LINES GP-LUBRICATION Parts scheme

For full view, you need register

Parts for your 651E WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4T-8886	[1]	HOSE AS
2.	5P-9297	[4]	CLIP (LOOP)
3.	3B-7721	[1]	BUSHING-REDUCER
4.	2D-1683	[1]	FITTING (1/8-27 PTF)

Information:

POWER TRAIN

WHEEL GP

Operation and Maintenance Manual

Tire Inflation Pressure Adjustment
651E Wheel Tractor-Scraper

Tire Shipping Pressure
651E Wheel Tractor-Scraper

Tire Inflation - Check
651E Wheel Tractor-Scraper

Wheel Bearing Oil Level - Check
651E Wheel Tractor-Scraper

Wheel Coolant Level - Check
651E Wheel Tractor-Scraper

Tire Inflation with Nitrogen
651E Wheel Tractor-Scraper

Wheel Bearing Oil - Change
651E Wheel Tractor-Scraper

Special Instruction

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Service Letter-NACD

144-5395 Brake Drum Assemblies Need To Be Removed From Dealer Parts Stock
144-5395 Brake Drum Assemblies Need To Be Removed From Dealer Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Rear Wheel
651E and 657E Wheel Tractor-Scrapers Wheel Scraper Power Train

Tool Operating Manual

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}

Service Letter-China

144-5395 Brake Drum Assemblies Need To Be Removed From Dealer Parts Stock
144-5395 Brake Drum Assemblies Need To Be Removed From Dealer Parts Stock

Service Letter-Asia

Reuse And Salvage Guidelines

Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}

Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201}
Thermal Spray Procedures for OHT and WTS Rear Wheel - Bearing Bores {0679, 4201}

Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201}
Thermal Spray Procedures for OHT and WTS Front Wheel - Bearing Bores {0679, 4006, 4201}

Thermal Spray Procedures for WTS Front Spindle {0679, 4051, 4201, 4205, 4208}
Thermal Spray Procedures for WTS Front Spindle {0679, 4051, 4201, 4205, 4208}

Thermal Spray Procedures for Wheel Tractor Scraper (WTS) Axle, Spindle, and Shafts {0679, 4001, 4008, 4051, 4205}
Thermal Spray Procedures for Wheel Tractor Scraper (WTS) Axle, Spindle, and Shafts {0679, 4001, 4008, 4051, 4205}

Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}

Service Letter-APD

144-5395 Brake Drum Assemblies Need To Be Removed From Dealer Parts Stock
144-5395 Brake Drum Assemblies Need To Be Removed From Dealer Parts Stock

Testing and Adjusting

Wheel Bearings - Adjust
651E and 657E Wheel Tractor-Scrapers Power Train

Disassembly and Assembly

Wheels
651E & 657E TRACTOR POWER TRAIN

Wheel Bearings & Seals
651E & 657E TRACTOR POWER TRAIN

Wheels, Bearings & Duo-Cone Seals (651E Scraper)
651E & 657E TRACTOR-SCRAPER MACHINE SYSTEM

Wheel Spindle (651E Scraper)
651E & 657E TRACTOR-SCRAPER MACHINE SYSTEM

Service Magazine

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog 651E :

9D-0523 VALVE GP-TIRE

8X-0931 WHEEL & BRAKE AR

6G-3010 WHEEL GP-REAR

4T-7202 FENDER GP

129-4410 FRAME GP-DRAFT

1U-2869 FRAME GP-DRAFT

523-8692 KIT-HITCH

Truck sale:

USD $339,057

2013 CAT 651E

Equipment Direct International
Yatala, QLD, Australia

USD $184,000

2000 CAT 651E

Zadoon Equipment
Wisconsin

USD $150,000

1984 CAT 651E

Papich Construction
Pismo Beach, California

USD $160,000

1984 CAT 651E

Brent Engineering
Irvine, California 92618

USD $160,000

1985 CAT 651E

Brent Engineering
Irvine, California 92618