AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

426C Backhoe Loader Center Pivot, Parallel Lift 1NR00001-00953 (MACHINE) POWERED BY 3054 Engine HYDRAULIC SYSTEM Caterpillar SIS



BACKHOE LOADER 426C BACKHOE LOADER 1NR
 426C Backhoe Loader Center Pivot, Parallel Lift 1NR00001-00953 (MACHINE) POWERED BY 3054 Engine SEBP2598 426C 1NR   (1996)

Parts group 426C:

  For full view, you need register
HYDRAULIC SYSTEM
ACCUMULATOR GP
LINES GP-RIDE CONTROL
169-6866 LINES GP-RIDE CONTROL
169-6866 LINES GP-RIDE CONTROL
S/N 1NR1-953; 1ZR1-925
UPDATED RIDE CONTROL VALVE
PART OF 163-9209 KIT-RIDE CONTROL
AN ATTACHMENT
CONTROL GP-RIDE
163-9209 KIT-RIDE CONTROL
163-9209 KIT-RIDE CONTROL
S/N 1NR1-953; 1ZR1-925
CANNOT BE USED WITH LOADER LOCK VALVES
AN ATTACHMENT
COOLER GP
RADIATOR & HYD OIL COOLER GP
144-2218 RADIATOR & HYD OIL COOLER GP
144-2218 RADIATOR & HYD OIL COOLER GP
S/N 1NR454-953; 1ZR426-925
PART OF 144-2217 COOLING AR-HIGH AMBIENT TEMP
AN ATTACHMENT
RADIATOR & HYD OIL COOLER GP
144-2220 RADIATOR & HYD OIL COOLER GP
144-2220 RADIATOR & HYD OIL COOLER GP
S/N 1NR454-953; 1ZR426-925
PART OF 154-3797 RADIATOR GP
Type 1
AN ATTACHMENT
RADIATOR & HYD OIL COOLER GP
144-2220 RADIATOR & HYD OIL COOLER GP
144-2220 RADIATOR & HYD OIL COOLER GP
S/N 1NR454-953; 1ZR426-925
PART OF 154-3797 RADIATOR GP
Type 2
AN ATTACHMENT
RADIATOR & HYD OIL COOLER GP
145-6714 RADIATOR & HYD OIL COOLER GP
145-6714 RADIATOR & HYD OIL COOLER GP
S/N 1NR454-953; 1ZR426-925
PART OF 145-6708 COOLING AR
AN ATTACHMENT
RADIATOR & HYD OIL COOLER GP
147-1557 RADIATOR & HYD OIL COOLER GP
147-1557 RADIATOR & HYD OIL COOLER GP
S/N 1NR1-953; 1ZR1-925
PART OF 147-1555, 147-1556 COOLING AR-HIGH AMBIENT TEMP
AN ATTACHMENT
RADIATOR & HYD OIL COOLER GP
147-1558 RADIATOR & HYD OIL COOLER GP
147-1558 RADIATOR & HYD OIL COOLER GP
S/N 1NR454-953; 1ZR426-925
PART OF 154-3799 RADIATOR & HYD OIL COOLER GP
AN ATTACHMENT
RADIATOR & HYD OIL COOLER GP
154-3799 RADIATOR & HYD OIL COOLER GP
154-3799 RADIATOR & HYD OIL COOLER GP
S/N 1NR454-953; 1ZR426-925
PART OF 147-1557 RADIATOR & HYD OIL COOLER GP
AN ATTACHMENT
COOLER GP-HYDRAULIC OIL
7E-4635 COOLER GP-HYDRAULIC OIL
7E-4635 COOLER GP-HYDRAULIC OIL
S/N 1NR1-453; 1ZR1-425
PART OF 7E-4629 INSTALLATION AR-ENGINE
CYLINDER GP
CYLINDER & MTG GP-COUPLER
122-6404 CYLINDER & MTG GP-COUPLER
122-6404 CYLINDER & MTG GP-COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLATION
PART OF 119-4118, 137-6399, 138-9796, 148-2301, 149-1062 LINES GP-COUPLER
AN ATTACHMENT
CYLINDER GP-BACKHOE BUCKET
126-8316 CYLINDER GP-BACKHOE BUCKET
126-8316 CYLINDER GP-BACKHOE BUCKET
S/N 1NR1-953; 1ZR1-925
95.25MM (3.75 IN) BORE X 875MM (34.45 IN) STROKE
PART OF 121-8296, 121-8299, 121-8300, 121-8303, 121-8304, 121-8307, 121-8308, 121-8309, 121-8321, 8Y-7459 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
CYLINDER GP-BACKHOE BUCKET
6E-3692 CYLINDER GP-BACKHOE BUCKET
6E-3692 CYLINDER GP-BACKHOE BUCKET
S/N 1NR1-953; 1ZR1-925
95.25MM (3.75 IN) BORE X 858MM (33 IN) STROKE. EXTENSION
PART OF 121-8297, 121-8298, 121-8301, 121-8302, 121-8305, 121-8306 BACKHOE AR-EXTENDABLE STICK
AN ATTACHMENT
CYLINDER GP-BOOM
6E-1948 CYLINDER GP-BOOM
6E-1948 CYLINDER GP-BOOM
S/N 1NR1-953; 1ZR1-925
127 MM (4.75 IN) BORE X 1045 MM (39 IN) STROKE
PART OF 120-9575, 143-1796 HYDRAULIC AR
CYLINDER GP-COUPLER
9T-8823 CYLINDER GP-COUPLER
9T-8823 CYLINDER GP-COUPLER
S/N 1NR1-953; 1ZR1-925
50.8-MM (2-IN) BORE X 79-MM (3.11-IN) STROKE
PART OF 122-6404 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
CYLINDER GP-EXTENDABLE STICK
6E-3662 CYLINDER GP-EXTENDABLE STICK
6E-3662 CYLINDER GP-EXTENDABLE STICK
S/N 1NR1-953; 1ZR1-925
76 MM (3 IN.) BORE X 1219 MM (45.5 IN.) STROKE
PART OF 9R-7739 STICK GP-EXTENDABLE
AN ATTACHMENT
CYLINDER GP-LIFT
111-0888 CYLINDER GP-LIFT
111-0888 CYLINDER GP-LIFT
S/N 1NR1-953; 1ZR1-925
88.9MM (3.5 IN) BORE X 699.2MM (28.5 IN) STROKE
PART OF 123-5087 CYLINDER GP-LIFT
123-5087 CYLINDER GP-LIFT
123-5087 CYLINDER GP-LIFT
S/N 1NR1-953; 1ZR1-925
88.9MM(3.5 IN) BORE X 699.2MM(27.5 IN) STROKE
PART OF 120-9575, 143-1796 HYDRAULIC AR
CYLINDER GP-LIFT
123-5089 CYLINDER GP-LIFT
123-5089 CYLINDER GP-LIFT
S/N 1NR1-953; 1ZR1-925
88.9MM (3.5 IN) BORE X 699.2MM (27.5 IN) STROKE
PART OF 123-5087 CYLINDER GP-LIFT
CYLINDER GP-MULTIPURPOSE BUKT
185-1839 CYLINDER GP-MULTIPURPOSE BUKT
185-1839 CYLINDER GP-MULTIPURPOSE BUKT
S/N 1ZR1-925
76.2-MM (2.99-IN) BORE X 262-MM (10.31-IN) STROKE
PART OF 124-0488 BUCKET AR-MULTIPURPOSE
FIELD REPLACEMENT FOR @@@@@ 9T-4006@@@@@
AN ATTACHMENT
CYLINDER GP-MULTIPURPOSE BUKT
9T-4006 CYLINDER GP-MULTIPURPOSE BUKT
9T-4006 CYLINDER GP-MULTIPURPOSE BUKT
S/N 1NR1-953; 1ZR1-925
76.2-MM (3-IN) BORE X 260-MM (10.2-IN) STROKE
PART OF 124-0486, 124-0487, 124-0489, 124-0490, 124-0491 BUCKET AR-MULTIPURPOSE
FIELD REPLACEMENT ORDER @@@@@185-1839@@@@@
AN ATTACHMENT
CYLINDER GP-STABILIZER
131-1846 CYLINDER GP-STABILIZER
131-1846 CYLINDER GP-STABILIZER -LH
S/N 1NR1-953; 1ZR1-925
101.6MM(4IN) BORE X 541MM(31.2IN) STROKE
PART OF 120-9575, 143-1796 HYDRAULIC AR
CYLINDER GP-STABILIZER
131-1847 CYLINDER GP-STABILIZER
131-1847 CYLINDER GP-STABILIZER -RH
S/N 1NR1-953; 1ZR1-925
101.6MM(4IN) BORE X 541MM(21.3IN) STROKE
PART OF 120-9575, 143-1796 HYDRAULIC AR
CYLINDER GP-STICK
6E-1935 CYLINDER GP-STICK
6E-1935 CYLINDER GP-STICK
S/N 1NR1-953; 1ZR1-925
127MM (5IN) BORE X 710MM (28IN) STROKE
PART OF 120-9575, 143-1796 HYDRAULIC AR
CYLINDER GP-SWING
116-6861 CYLINDER GP-SWING
116-6861 CYLINDER GP-SWING
S/N 1NR1-953; 1ZR1-925
101.6 MM (4 IN) BORE X 249 MM (9.8 IN) STROKE
PART OF 120-9575, 143-1796 HYDRAULIC AR
CYLINDER GP-TILT
123-5091 CYLINDER GP-TILT
123-5091 CYLINDER GP-TILT
S/N 1NR1-953; 1ZR1-925
76.2MM (3IN) BORE X 884.5MM (34.8IN) STROKE
PART OF 120-9575, 143-1796 HYDRAULIC AR
LINES GP-COUPLER
119-4118 LINES GP-COUPLER
119-4118 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 112-1844, 119-8179, 119-8181 HYDRAULIC AR
AN ATTACHMENT
LINES GP-COUPLER
137-6399 LINES GP-COUPLER
137-6399 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLATION
PART OF 137-6398 CONVERSION AR-QUICK COUPLER
LINES GP-COUPLER
138-9796 LINES GP-COUPLER
138-9796 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 139-9152, 139-9153, 143-3949, 143-3950 HYDRAULIC AR
AN ATTACHMENT
LINES GP-COUPLER
148-2301 LINES GP-COUPLER
148-2301 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 139-9153, 143-3949, 143-3950, 143-3951, 143-3952 HYDRAULIC AR
AN ATTACHMENT
LINES GP-COUPLER
149-1062 LINES GP-COUPLER
149-1062 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLED
PART OF 144-2823 CONVERSION AR-QUICK COUPLER
AN ATTACHMENT
PAD & GUARD GP-STABILIZER
133-3362 PAD & GUARD GP-STABILIZER
133-3362 PAD & GUARD GP-STABILIZER -STREET
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
PAD & GUARD GP-STABILIZER
133-3363 PAD & GUARD GP-STABILIZER
133-3363 PAD & GUARD GP-STABILIZER
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
PAD & GUARD GP-STABILIZER
133-3366 PAD & GUARD GP-STABILIZER
133-3366 PAD & GUARD GP-STABILIZER -STREET
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
DRIVE GP
DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
FILTER GP
FILTER GP-OIL
143-0421 FILTER GP-OIL
143-0421 FILTER GP-OIL -HYDRAULIC
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575 HYDRAULIC AR
OPTIONAL FIELD REPLACEMENT ORDER 1-134-3014 FILTER AS-OIL
FILTER GP-OIL
152-8308 FILTER GP-OIL
152-8308 FILTER GP-OIL
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
OPTIONAL FIELD REPLACEMENT ORDER 1-134-3014 FILTER AS-OIL
6E-5215 FILTER GP-OIL
6E-5215 FILTER GP-OIL
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575 HYDRAULIC AR
FITTING GP
FITTING GP-HYDRAULIC
132-8769 FITTING GP-HYDRAULIC
132-8769 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N 1NR1-953; 1ZR1-925
FOR USE WITH HYDRAULIC ATTACHMENTS
AN ATTACHMENT
HYDRAULIC GP
106-6253 HYDRAULIC AR
106-6253 HYDRAULIC AR
S/N 1NR1-853; 1ZR1-925
AN ATTACHMENT
112-1844 HYDRAULIC AR
112-1844 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
CONVERTS 2 BANK TO 3 BANK
AN ATTACHMENT
112-1848 HYDRAULIC AR
112-1848 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
PARALLEL LIFT, THREE BANK
AN ATTACHMENT
119-4005 HYDRAULIC AR
119-4005 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
119-4006 HYDRAULIC AR
119-4006 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
119-8176 HYDRAULIC AR
119-8176 HYDRAULIC AR
S/N 1ZR1-925
PARALLEL LIFT, 2 BANK
AN ATTACHMENT
119-8177 HYDRAULIC AR
119-8177 HYDRAULIC AR
S/N 1ZR1-925
PARALLEL LIFT, 2 BANK
AN ATTACHMENT
119-8178 HYDRAULIC AR
119-8178 HYDRAULIC AR
S/N 1ZR1-925
AN ATTACHMENT
119-8179 HYDRAULIC AR
119-8179 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
PARALLEL LIFT, 3 BANK
AN ATTACHMENT
119-8180 HYDRAULIC AR
119-8180 HYDRAULIC AR
S/N 1ZR1-925
PARALLEL LIFT, 3 BANK, LIFT/TILT CYLINDER LOCKS
AN ATTACHMENT
119-8181 HYDRAULIC AR
119-8181 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
PARALLEL LIFT, 3 BANK
AN ATTACHMENT
120-9575 HYDRAULIC AR
120-9575 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
PART OF 120-9556, 120-9557 COMMON AR
121-8324 HYDRAULIC AR
121-8324 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
7 BANK-LOCK
AN ATTACHMENT
121-8326 HYDRAULIC AR
121-8326 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
7 BANK, RIGHT FT
AN ATTACHMENT
121-8327 HYDRAULIC AR
121-8327 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
7 BANK, LOCK, RIGHT FOOT
AN ATTACHMENT
121-8331 HYDRAULIC AR
121-8331 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
8 BANK, RIGHT & LEFT FOOT
AN ATTACHMENT
121-8333 HYDRAULIC AR
121-8333 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
4 LEVER, FOOT SWING, 7 BANK LOCK
AN ATTACHMENT
126-0188 HYDRAULIC AR
126-0188 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
7 BANK, 4TH LEVER CTRL
AN ATTACHMENT
130-1245 HYDRAULIC AR
130-1245 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
7 BANK
AN ATTACHMENT
130-8381 HYDRAULIC AR
130-8381 HYDRAULIC AR
S/N 1ZR1-925
AN ATTACHMENT
131-1841 HYDRAULIC AR
131-1841 HYDRAULIC AR
S/N 1ZR1-925
AN ATTACHMENT
139-9152 HYDRAULIC AR
139-9152 HYDRAULIC AR
S/N 1ZR1-925
PART OF 130-8381, 143-3543 HYDRAULIC AR
AN ATTACHMENT
139-9153 HYDRAULIC AR
139-9153 HYDRAULIC AR
S/N 1ZR1-925
PARALLEL LIFT, 3 BANK
PART OF 131-1841, 143-3544 HYDRAULIC AR
AN ATTACHMENT
139-9418 HYDRAULIC AR
139-9418 HYDRAULIC AR
S/N 1NR1-953; 1ZR1-925
3 LEVER FOOT SWING
AN ATTACHMENT
143-1796 HYDRAULIC AR
143-1796 HYDRAULIC AR
S/N 1NR454-953; 1ZR426-925
PART OF 143-1742, 143-1743 COMMON AR
143-3543 HYDRAULIC AR
143-3543 HYDRAULIC AR
S/N 1ZR1-925
PARALLEL LIFT, 3 BANK
AN ATTACHMENT
143-3544 HYDRAULIC AR
143-3544 HYDRAULIC AR
S/N 1ZR1-925
PARALLEL LIFT, 3 BANK, LOAD CHECK
AN ATTACHMENT
143-3945 HYDRAULIC AR
143-3945 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 2 BANK
AN ATTACHMENT
143-3946 HYDRAULIC AR
143-3946 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 2 BANK
AN ATTACHMENT
143-3947 HYDRAULIC AR
143-3947 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 3 BANK
AN ATTACHMENT
143-3948 HYDRAULIC AR
143-3948 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 3 BANK
AN ATTACHMENT
143-3949 HYDRAULIC AR
143-3949 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 3 BANK
AN ATTACHMENT
143-3950 HYDRAULIC AR
143-3950 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 3 BANK
AN ATTACHMENT
143-3951 HYDRAULIC AR
143-3951 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT/3 BANK
PART OF 143-4106, 143-5943 HYDRAULIC AR
AN ATTACHMENT
143-3952 HYDRAULIC AR
143-3952 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT/3 BANK
PART OF 143-4101, 143-5945 HYDRAULIC AR
AN ATTACHMENT
143-4101 HYDRAULIC AR
143-4101 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 3 BANK, LOAD CHECK, IT
AN ATTACHMENT
143-4106 HYDRAULIC AR
143-4106 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 3 BANK, IT
AN ATTACHMENT
143-5943 HYDRAULIC AR
143-5943 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT/3 BANK
AN ATTACHMENT
143-5945 HYDRAULIC AR
143-5945 HYDRAULIC AR
S/N 1NR1-953
PARALLEL LIFT, 3 BANK, LOAD CHECK
AN ATTACHMENT
HYDRAULIC AR
216-6858 HYDRAULIC AR
216-6858 HYDRAULIC AR -CUSHION SWING
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
KICKOUT & POSITIONER GP
CONTROL GP-POSITION
3E-7843 CONTROL GP-POSITION
3E-7843 CONTROL GP-POSITION
S/N 1NR1-953; 1ZR1-925
PART OF 122-1644 WIRING GP-KICKOUT & POSITIONER
WIRING GP-KICKOUT & POSITIONER
122-1644 WIRING GP-KICKOUT & POSITIONER
122-1644 WIRING GP-KICKOUT & POSITIONER
S/N 1NR1-953; 1ZR1-925
PART OF 112-1827 LOADER AR
LINES GP-AUXILIARY
KIT-AUXILIARY LINES
135-7198 KIT-AUXILIARY LINES
135-7198 KIT-AUXILIARY LINES
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
KIT-AUXILIARY LINES
135-7199 KIT-AUXILIARY LINES
135-7199 KIT-AUXILIARY LINES
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
KIT-AUXILIARY LINES
135-7200 KIT-AUXILIARY LINES
135-7200 KIT-AUXILIARY LINES
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
LINES GP-BACKHOE AUXILIARY
121-8347 LINES GP-BACKHOE AUXILIARY
121-8347 LINES GP-BACKHOE AUXILIARY
S/N 1NR1-953; 1ZR1-925
PART OF 121-8301, 121-8302, 121-8306 BACKHOE AR-EXTENDABLE STICK
AN ATTACHMENT
LINES GP-BACKHOE AUXILIARY
121-8348 LINES GP-BACKHOE AUXILIARY
121-8348 LINES GP-BACKHOE AUXILIARY
S/N 1NR1-953; 1ZR1-925
PART OF 121-8299, 121-8300, 121-8304 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-BACKHOE AUXILIARY
160-2744 LINES GP-BACKHOE AUXILIARY
160-2744 LINES GP-BACKHOE AUXILIARY
S/N 1NR1-953; 1ZR1-925
PART OF 121-8301 BACKHOE AR-EXTENDABLE STICK
AN ATTACHMENT
LINES GP-BACKHOE AUXILIARY
8Y-7195 LINES GP-BACKHOE AUXILIARY
8Y-7195 LINES GP-BACKHOE AUXILIARY
S/N 1NR1-953; 1ZR1-925
PART OF 121-8307, 121-8308, 121-8309, 121-8321 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-LOADER AUXILIARY
112-6403 LINES GP-LOADER AUXILIARY
112-6403 LINES GP-LOADER AUXILIARY
S/N 1NR1-953; 1ZR1-925
PART OF 112-1848, 119-8178, 119-8180, 143-3947, 143-3948 HYDRAULIC AR
AN ATTACHMENT
LINES GP-BOOM
LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
LINES GP-BOOM
118-6913 LINES GP-BOOM
118-6913 LINES GP-BOOM
S/N 1NR1-953; 1ZR1-925
PART OF 121-8301 BACKHOE AR-EXTENDABLE STICK, 121-8299 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-BOOM
121-8344 LINES GP-BOOM
121-8344 LINES GP-BOOM
S/N 1NR1-953; 1ZR1-925
PART OF 121-8305 BACKHOE AR-EXTENDABLE STICK, 121-8303, 121-8309 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-BOOM
121-8345 LINES GP-BOOM
121-8345 LINES GP-BOOM
S/N 1NR1-953; 1ZR1-925
BOOM & STICK
PART OF 121-8306 BACKHOE AR-EXTENDABLE STICK, 121-8304 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-BOOM
121-8346 LINES GP-BOOM
121-8346 LINES GP-BOOM
S/N 1NR1-953; 1ZR1-925
PART OF 121-8298 BACKHOE AR-EXTENDABLE STICK, 121-8296, 121-8308 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-BOOM
121-9804 LINES GP-BOOM
121-9804 LINES GP-BOOM
S/N 1NR1-953; 1ZR1-925
PART OF 121-8302 BACKHOE AR-EXTENDABLE STICK, 121-8300 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-BOOM
136-7836 LINES GP-BOOM
136-7836 LINES GP-BOOM
S/N 1NR1-953; 1ZR1-925
LOAD CONTROL-FIELD INSTALLATION
PART OF 136-7832 CONTROL AR-BOOM LOAD
LINES GP-BOOM
136-7838 LINES GP-BOOM
136-7838 LINES GP-BOOM
S/N 1NR1-953; 1ZR1-925
STICK LOAD CONTROL
PART OF 136-7834 CONTROL AR-BOOM & STICK LOAD
LINES GP-BOOM
9R-8334 LINES GP-BOOM
9R-8334 LINES GP-BOOM
S/N 1NR1-953; 1ZR1-925
PART OF 121-8297 BACKHOE AR-EXTENDABLE STICK, 121-8307, 121-8321, 8Y-7459 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-BUCKET
LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
LINES GP-BUCKET
9R-8335 LINES GP-BUCKET
9R-8335 LINES GP-BUCKET
S/N 1ZR1-925
PART OF 121-8321 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-BUCKET
9R-9464 LINES GP-BUCKET
9R-9464 LINES GP-BUCKET
S/N 1NR1-953; 1ZR1-925
PART OF 121-8296, 121-8299, 121-8300, 121-8303, 121-8304, 121-8307, 121-8308, 121-8309, 8Y-7459 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-MULTIPURPOSE BUCKET
118-4930 LINES GP-MULTIPURPOSE BUCKET
118-4930 LINES GP-MULTIPURPOSE BUCKET
S/N 1ZR1-925
PART OF 124-0487, 124-0488 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
LINES GP-MULTIPURPOSE BUCKET
119-4112 LINES GP-MULTIPURPOSE BUCKET
119-4112 LINES GP-MULTIPURPOSE BUCKET
S/N 1NR1-953; 1ZR1-925
PART OF 124-0486, 124-0489 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
LINES GP-MULTIPURPOSE BUCKET
126-7415 LINES GP-MULTIPURPOSE BUCKET
126-7415 LINES GP-MULTIPURPOSE BUCKET
S/N 1NR1-953; 1ZR1-925
PART OF 124-0491 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
LINES GP-MULTIPURPOSE BUCKET
126-7416 LINES GP-MULTIPURPOSE BUCKET
126-7416 LINES GP-MULTIPURPOSE BUCKET
S/N 1ZR1-925
PART OF 124-0490 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
LINES GP-MULTIPURPOSE BUCKET
139-2203 LINES GP-MULTIPURPOSE BUCKET
139-2203 LINES GP-MULTIPURPOSE BUCKET
S/N 1NR1-953; 1ZR1-925
PART OF 119-8142, 140-0952 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
LINES GP-COUPLER
LINES GP-COUPLER
119-4118 LINES GP-COUPLER
119-4118 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 112-1844, 119-8179, 119-8181 HYDRAULIC AR
AN ATTACHMENT
LINES GP-COUPLER
137-6399 LINES GP-COUPLER
137-6399 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLATION
PART OF 137-6398 CONVERSION AR-QUICK COUPLER
LINES GP-COUPLER
138-9796 LINES GP-COUPLER
138-9796 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 139-9152, 139-9153, 143-3949, 143-3950 HYDRAULIC AR
AN ATTACHMENT
LINES GP-COUPLER
148-2301 LINES GP-COUPLER
148-2301 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 139-9153, 143-3949, 143-3950, 143-3951, 143-3952 HYDRAULIC AR
AN ATTACHMENT
LINES GP-COUPLER
149-1062 LINES GP-COUPLER
149-1062 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLED
PART OF 144-2823 CONVERSION AR-QUICK COUPLER
AN ATTACHMENT
LINES GP-CYLINDER
LINES GP-LIFT CYLINDER
112-1851 LINES GP-LIFT CYLINDER
112-1851 LINES GP-LIFT CYLINDER
S/N 1NR1-953; 1ZR1-925
PART OF 119-8177, 119-8180, 119-8181, 139-9153, 143-3946, 143-3948, 143-3950, 143-3952 HYDRAULIC AR
AN ATTACHMENT
LINES GP-LIFT CYLINDER
112-6402 LINES GP-LIFT CYLINDER
112-6402 LINES GP-LIFT CYLINDER
S/N 1NR1-953; 1ZR1-925
PART OF 119-8176, 119-8178, 119-8179, 139-9152, 143-3945, 143-3947, 143-3949, 143-3951 HYDRAULIC AR
AN ATTACHMENT
LINES GP-LIFT CYLINDER
135-3494 LINES GP-LIFT CYLINDER
135-3494 LINES GP-LIFT CYLINDER
S/N 1NR1-953; 1ZR1-925
PART OF 135-3501 CONTROL AR-LIFT & TILT LOAD
Type 1
LINES GP-LIFT CYLINDER
135-3494 LINES GP-LIFT CYLINDER
135-3494 LINES GP-LIFT CYLINDER
S/N 1NR1-953; 1ZR1-925
PART OF 135-3501 CONTROL AR-LIFT & TILT LOAD
Type 2
LINES GP-TILT CYLINDER
112-1853 LINES GP-TILT CYLINDER
112-1853 LINES GP-TILT CYLINDER
S/N 1NR1-953; 1ZR1-925
PART OF 119-8177, 119-8180, 119-8181, 139-9153, 143-3946, 143-3948, 143-3950, 143-3952 HYDRAULIC AR
AN ATTACHMENT
LINES GP-TILT CYLINDER
112-6401 LINES GP-TILT CYLINDER
112-6401 LINES GP-TILT CYLINDER
S/N 1NR1-953; 1ZR1-925
PART OF 119-8176, 119-8178, 119-8179, 139-9152, 143-3945, 143-3947, 143-3949, 143-3951 HYDRAULIC AR
AN ATTACHMENT
LINES GP-TILT CYLINDER
135-3495 LINES GP-TILT CYLINDER
135-3495 LINES GP-TILT CYLINDER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLED
PART OF 135-3501 CONTROL AR-LIFT & TILT LOAD
LINES GP-HYDRAULIC
GUARD GP-LINES
119-3356 GUARD GP-LINES
119-3356 GUARD GP-LINES
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
LINES GP-HYDRAULIC
119-8154 LINES GP-HYDRAULIC
119-8154 LINES GP-HYDRAULIC
S/N 1NR1-953
ALL WHEEL STEER, ALL WHEEL DRIVE
PART OF 118-9116, 118-9118, 143-1778, 143-1779 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
LINES GP-HYDRAULIC
120-9582 LINES GP-HYDRAULIC
120-9582 LINES GP-HYDRAULIC
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575 HYDRAULIC AR
LINES GP-HYDRAULIC
121-8337 LINES GP-HYDRAULIC
121-8337 LINES GP-HYDRAULIC
S/N 1NR1-953; 1ZR1-925
1 CIRCUIT
PART OF 121-8297, 121-8298, 121-8305 BACKHOE AR-EXTENDABLE STICK, 121-8307, 121-8308, 121-8309, 121-8321 BACKHOE AR-STANDARD STICK, 106-6253, 119-4005 HYDRAULIC AR
AN ATTACHMENT
LINES GP-HYDRAULIC
145-4915 LINES GP-HYDRAULIC
145-4915 LINES GP-HYDRAULIC
S/N 1NR454-953; 1ZR426-925
PART OF 143-1796 HYDRAULIC AR
LINES GP-HYDRAULIC
146-5129 LINES GP-HYDRAULIC
146-5129 LINES GP-HYDRAULIC
S/N 1NR1-953; 1ZR1-925
PART OF 145-5895, 145-5896 SUPPRESSION AR-SOUND
AN ATTACHMENT
LINES GP-HYDRAULIC
146-5130 LINES GP-HYDRAULIC
146-5130 LINES GP-HYDRAULIC
S/N 1NR1-925; 1ZR1-925
PART OF 145-5892 SUPPRESSION AR-SOUND
AN ATTACHMENT
LINES GP-HYDRAULIC
160-7729 LINES GP-HYDRAULIC
160-7729 LINES GP-HYDRAULIC
S/N 1NR1-953; 1ZR1-925
PART OF 121-8297 BACKHOE AR-EXTENDABLE STICK, 119-4005 HYDRAULIC AR
AN ATTACHMENT
LINES GP-RETURN
121-8338 LINES GP-RETURN
121-8338 LINES GP-RETURN
S/N 1NR1-953; 1ZR1-925
PART OF 121-8297 BACKHOE AR-EXTENDABLE STICK, 121-8307, 121-8321, 8Y-7459 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-RETURN
121-8339 LINES GP-RETURN
121-8339 LINES GP-RETURN
S/N 1NR1-953; 1ZR1-925
PART OF 121-8301 BACKHOE AR-EXTENDABLE STICK, 121-8299 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-RETURN
121-9805 LINES GP-RETURN
121-9805 LINES GP-RETURN
S/N 1NR1-953; 1ZR1-925
PART OF 121-8298, 121-8305 BACKHOE AR-EXTENDABLE STICK, 121-8296, 121-8303, 121-8308, 121-8309 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-RETURN
121-9806 LINES GP-RETURN
121-9806 LINES GP-RETURN
S/N 1NR1-953; 1ZR1-925
PART OF 121-8302, 121-8306 BACKHOE AR-EXTENDABLE STICK, 121-8300, 121-8304 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
137-6398 CONVERSION AR-QUICK COUPLER
137-6398 CONVERSION AR-QUICK COUPLER
S/N 1NR1-953; 1ZR1-925
FOR USE WITH 119-8178 HYDRAULIC AR, 119-8180 HYDRAULIC AR
FIELD INSTALLATION
144-2823 CONVERSION AR-QUICK COUPLER
144-2823 CONVERSION AR-QUICK COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLATION
AN ATTACHMENT
LINES GP-PUMP
LINES GP-PUMP
119-8158 LINES GP-PUMP
119-8158 LINES GP-PUMP
S/N 1ZR1-925
PART OF 118-9125, 118-9126, 118-9127, 137-6844, 143-1782, 143-1783, 143-1784, 143-1791 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
LINES GP-RETURN
LINES GP-RETURN
121-8338 LINES GP-RETURN
121-8338 LINES GP-RETURN
S/N 1NR1-953; 1ZR1-925
PART OF 121-8297 BACKHOE AR-EXTENDABLE STICK, 121-8307, 121-8321, 8Y-7459 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-RETURN
121-8339 LINES GP-RETURN
121-8339 LINES GP-RETURN
S/N 1NR1-953; 1ZR1-925
PART OF 121-8301 BACKHOE AR-EXTENDABLE STICK, 121-8299 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-RETURN
121-9805 LINES GP-RETURN
121-9805 LINES GP-RETURN
S/N 1NR1-953; 1ZR1-925
PART OF 121-8298, 121-8305 BACKHOE AR-EXTENDABLE STICK, 121-8296, 121-8303, 121-8308, 121-8309 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-RETURN
121-9806 LINES GP-RETURN
121-9806 LINES GP-RETURN
S/N 1NR1-953; 1ZR1-925
PART OF 121-8302, 121-8306 BACKHOE AR-EXTENDABLE STICK, 121-8300, 121-8304 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-RIDE CONTROL
163-9209 KIT-RIDE CONTROL
163-9209 KIT-RIDE CONTROL
S/N 1NR1-953; 1ZR1-925
CANNOT BE USED WITH LOADER LOCK VALVES
AN ATTACHMENT
LINES GP-RIDE CONTROL
169-6866 LINES GP-RIDE CONTROL
169-6866 LINES GP-RIDE CONTROL
S/N 1NR1-953; 1ZR1-925
UPDATED RIDE CONTROL VALVE
PART OF 163-9209 KIT-RIDE CONTROL
AN ATTACHMENT
LINES GP-STABILIZER
LINES GP-STABILIZER
106-6249 LINES GP-STABILIZER
106-6249 LINES GP-STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575 HYDRAULIC AR
LINES GP-STABILIZER
106-6249 LINES GP-STABILIZER
106-6249 LINES GP-STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 118-9118, 118-9126, 143-1782, 143-1783, 143-1784, 143-1791 DRIVE AR-BACKHOE LOADER, 120-9575, 143-1796 HYDRAULIC AR
ALSO AN ATTACHMENT
139-1923 LINES GP-STABILIZER
139-1923 LINES GP-STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 139-1921 CONVERSION AR-CERTIFICATION, 147-9649, 147-9651 DRIVE AR-BACKHOE LOADER
CANNOT BE USED WITH CYLINDER GUARDS
AN ATTACHMENT
LINES GP-STICK
LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
8Y-7474 LINES GP-BACKHOE
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
LINES GP-EXTENDABLE STICK
9R-8784 LINES GP-EXTENDABLE STICK
9R-8784 LINES GP-EXTENDABLE STICK
S/N 1NR1-953; 1ZR1-925
PART OF 110-5924 STICK AR-EXTENDABLE
AN ATTACHMENT
LINES GP-STICK
160-7749 LINES GP-STICK
160-7749 LINES GP-STICK
S/N 1NR1-953; 1ZR1-925
PART OF 121-8297 BACKHOE AR-EXTENDABLE STICK
AN ATTACHMENT
LINES GP-STICK
9R-8336 LINES GP-STICK
9R-8336 LINES GP-STICK
S/N 1NR1-953; 1ZR1-925
PART OF 121-8297, 121-8298, 121-8301, 121-8302 BACKHOE AR-EXTENDABLE STICK, 121-8296, 121-8299, 121-8300, 121-8307, 121-8308, 121-8321, 8Y-7459 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
LINES GP-STICK
9R-8785 LINES GP-STICK
9R-8785 LINES GP-STICK
S/N 1NR1-953; 1ZR1-925
EXTENDABLE
PART OF 121-8297, 121-8298, 121-8305 BACKHOE AR-EXTENDABLE STICK
AN ATTACHMENT
LINES GP-SWING
LINES GP-SWING
106-6250 LINES GP-SWING
106-6250 LINES GP-SWING
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
LOCK GP
LOCK GP-HYDRAULIC FOOT CONTROL
136-8034 LOCK GP-HYDRAULIC FOOT CONTROL
136-8034 LOCK GP-HYDRAULIC FOOT CONTROL
S/N 1NR1-953; 1ZR1-925
THREE LEVER FOOT SWING
AN ATTACHMENT
MANIFOLD GP
LINES GP-RIDE CONTROL
169-6866 LINES GP-RIDE CONTROL
169-6866 LINES GP-RIDE CONTROL
S/N 1NR1-953; 1ZR1-925
UPDATED RIDE CONTROL VALVE
PART OF 163-9209 KIT-RIDE CONTROL
AN ATTACHMENT
MOUNTING GP
MOUNTING GP-BANK VALVE
122-9136 MOUNTING GP-BANK VALVE
122-9136 MOUNTING GP-BANK VALVE -BACKHOE
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
MOUNTING GP-CYLINDER
9R-4668 MOUNTING GP-CYLINDER
9R-4668 MOUNTING GP-CYLINDER -MULTIPURPOSE BUCKET
S/N 1NR1-953; 1ZR1-925
PART OF 124-0486, 124-0487, 124-0488, 124-0489, 124-0490, 124-0491 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
PUMP GP
DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
PUMP GP-PISTON
112-6564 PUMP GP-PISTON
112-6564 PUMP GP-PISTON
S/N 1NR1-453; 1ZR1-425
HYDRAULIC & STEERING PUMP
PART OF 120-9575 HYDRAULIC AR
155-5109 PUMP GP-PISTON
155-5109 PUMP GP-PISTON
S/N 1NR454-953; 1ZR426-925
PART OF 147-6211, 147-6214, 153-6354 ENGINE AR
Type 1
AN ATTACHMENT
PUMP GP-PISTON
155-5109 PUMP GP-PISTON
155-5109 PUMP GP-PISTON
S/N 1NR454-953; 1ZR426-925
PART OF 147-6211, 147-6214 ENGINE AR
Type 2
AN ATTACHMENT
ROTATING GP-PUMP
120-5726 ROTATING GP-PUMP
120-5726 ROTATING GP-PUMP
S/N 1NR1-953; 1ZR1-925
PART OF 112-6564, 155-5109 PUMP GP-PISTON
ALSO AN ATTACHMENT
SHAFT GP-PUMP DRIVE
128-5596 SHAFT GP-PUMP DRIVE
128-5596 SHAFT GP-PUMP DRIVE
S/N 1NR1-953; 1ZR1-925
PART OF 112-1826 DRIVE & MTG GP-PUMP
VALVE GP-PUMP CONTROL
135-6616 VALVE GP-PUMP CONTROL
135-6616 VALVE GP-PUMP CONTROL
S/N 1NR1-953; 1ZR1-925
PART OF 112-6564, 155-5109 PUMP GP-PISTON
ALSO AN ATTACHMENT
SHAFT GP
SHAFT GP-PUMP DRIVE
128-5596 SHAFT GP-PUMP DRIVE
128-5596 SHAFT GP-PUMP DRIVE
S/N 1NR1-953; 1ZR1-925
PART OF 112-1826 DRIVE & MTG GP-PUMP
TANK GP
DRAIN GP-ECOLOGY
120-9641 DRAIN GP-ECOLOGY
120-9641 DRAIN GP-ECOLOGY
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
TANK & MTG GP-HYDRAULIC
106-6252 TANK & MTG GP-HYDRAULIC
106-6252 TANK & MTG GP-HYDRAULIC
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
TANK GP-HYDRAULIC
122-0051 TANK GP-HYDRAULIC
122-0051 TANK GP-HYDRAULIC
S/N 1NR1-953; 1ZR1-925
PART OF 106-6252 TANK & MTG GP-HYDRAULIC
VALVE GP-BANK
112-1849 CONVERSION GP-CONTROL VALVE
112-1849 CONVERSION GP-CONTROL VALVE
S/N 1NR1-953; 1ZR1-925
THIRD VALVE, PARALLEL LIFT
PART OF 112-1844, 112-1848 HYDRAULIC AR
AN ATTACHMENT
CONVERSION GP-CONTROL VALVE
119-4003 CONVERSION GP-CONTROL VALVE
119-4003 CONVERSION GP-CONTROL VALVE
S/N 1NR1-953; 1ZR1-925
SIX TO SEVEN VALVE
PART OF 106-6253, 119-4005 HYDRAULIC AR
AN ATTACHMENT
CONVERSION GP-CONTROL VALVE
119-4004 CONVERSION GP-CONTROL VALVE
119-4004 CONVERSION GP-CONTROL VALVE
S/N 1NR1-953; 1ZR1-925
SEVEN TO EIGHT VALVE
PART OF 119-4006 HYDRAULIC AR
AN ATTACHMENT
MOUNTING GP-BANK VALVE
122-9136 MOUNTING GP-BANK VALVE
122-9136 MOUNTING GP-BANK VALVE -BACKHOE
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
VALVE GP-BANK 2
114-0048 VALVE GP-BANK 2
114-0048 VALVE GP-BANK 2 -LOADER
S/N 1ZR1-925
PART OF 119-8176, 119-8177 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-BANK 2
143-3698 VALVE GP-BANK 2
143-3698 VALVE GP-BANK 2 -LOADER
S/N 1NR1-953
PART OF 143-3945, 143-3946 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-BANK 3
114-0049 VALVE GP-BANK 3
114-0049 VALVE GP-BANK 3 -LOADER
S/N 1NR1-953; 1ZR1-925
PART OF 119-8178, 119-8179, 119-8180, 119-8181, 139-9152, 139-9153 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-BANK 3
143-3697 VALVE GP-BANK 3
143-3697 VALVE GP-BANK 3 -LOADER
S/N 1NR1-953
PART OF 143-3947, 143-3948, 143-3949, 143-3950, 143-3951, 143-3952 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-BANK 6
105-8906 VALVE GP-BANK 6
105-8906 VALVE GP-BANK 6 -BACKHOE AND STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 139-9418 HYDRAULIC AR
Type 1
FOR USE WITH @@@@@ 8Y-7459@@@@@
AN ATTACHMENT
VALVE GP-BANK 6
105-8906 VALVE GP-BANK 6
105-8906 VALVE GP-BANK 6 -BACKHOE AND STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 139-9418 HYDRAULIC AR
Type 2
FOR USE WITH @@@@@ 8Y-7459@@@@@
AN ATTACHMENT
VALVE GP-BANK 7
105-8907 VALVE GP-BANK 7
105-8907 VALVE GP-BANK 7 -BACKHOE AND STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 121-8326, 126-0188, 130-1245 HYDRAULIC AR
Type 1
AN ATTACHMENT
VALVE GP-BANK 7
105-8907 VALVE GP-BANK 7
105-8907 VALVE GP-BANK 7 -BACKHOE AND STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 121-8326, 126-0188, 130-1245 HYDRAULIC AR
Type 2
AN ATTACHMENT
VALVE GP-BANK 7
119-9481 VALVE GP-BANK 7
119-9481 VALVE GP-BANK 7 -BACKHOE AND STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 121-8324, 121-8327, 121-8333 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-BANK 8
105-8908 VALVE GP-BANK 8
105-8908 VALVE GP-BANK 8 -BACKHOE AND STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 121-8331 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-CHECK
VALVE GP-CHECK
135-0565 VALVE GP-CHECK
135-0565 VALVE GP-CHECK
S/N 1NR1-953; 1ZR1-925
PART OF 106-6249, 139-1923 LINES GP-STABILIZER
ALSO AN ATTACHMENT
VALVE GP-CONTROL
112-1849 CONVERSION GP-CONTROL VALVE
112-1849 CONVERSION GP-CONTROL VALVE
S/N 1NR1-953; 1ZR1-925
THIRD VALVE, PARALLEL LIFT
PART OF 112-1844, 112-1848 HYDRAULIC AR
AN ATTACHMENT
CONVERSION GP-CONTROL VALVE
119-4003 CONVERSION GP-CONTROL VALVE
119-4003 CONVERSION GP-CONTROL VALVE
S/N 1NR1-953; 1ZR1-925
SIX TO SEVEN VALVE
PART OF 106-6253, 119-4005 HYDRAULIC AR
AN ATTACHMENT
CONVERSION GP-CONTROL VALVE
119-4004 CONVERSION GP-CONTROL VALVE
119-4004 CONVERSION GP-CONTROL VALVE
S/N 1NR1-953; 1ZR1-925
SEVEN TO EIGHT VALVE
PART OF 119-4006 HYDRAULIC AR
AN ATTACHMENT
MOUNTING GP-BANK VALVE
122-9136 MOUNTING GP-BANK VALVE
122-9136 MOUNTING GP-BANK VALVE -BACKHOE
S/N 1NR1-953; 1ZR1-925
PART OF 120-9575, 143-1796 HYDRAULIC AR
VALVE & MTG GP-COUPLER
133-8912 VALVE & MTG GP-COUPLER
133-8912 VALVE & MTG GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 119-4118, 137-6399 LINES GP-COUPLER
AN ATTACHMENT
VALVE GP-CONTROL
100-4101 VALVE GP-CONTROL
100-4101 VALVE GP-CONTROL -BOOM & STICK
S/N 1NR1-953; 1ZR1-925
PART OF 136-7834 CONTROL AR-BOOM & STICK LOAD, 136-7832 CONTROL AR-BOOM LOAD
VALVE GP-CONTROL
124-8816 VALVE GP-CONTROL
124-8816 VALVE GP-CONTROL -STICK
S/N 1NR1-953; 1ZR1-925
PART OF 105-8906 VALVE GP-BANK 6, 105-8907, 119-9481 VALVE GP-BANK 7, 105-8908 VALVE GP-BANK 8
AN ATTACHMENT
VALVE GP-CONTROL
124-8819 VALVE GP-CONTROL
124-8819 VALVE GP-CONTROL -TILT
S/N 1NR1-953; 1ZR1-925
PART OF 114-0048, 143-3698 VALVE GP-BANK 2, 114-0049, 143-3697 VALVE GP-BANK 3
AN ATTACHMENT
VALVE GP-CONTROL
124-8820 VALVE GP-CONTROL
124-8820 VALVE GP-CONTROL -CLAMSHELL
S/N 1NR1-953; 1ZR1-925
PART OF 112-1849 CONVERSION GP-CONTROL VALVE, 114-0049, 143-3697 VALVE GP-BANK 3
AN ATTACHMENT
VALVE GP-CONTROL
127-5678 VALVE GP-CONTROL
127-5678 VALVE GP-CONTROL -SWING
S/N 1NR1-953; 1ZR1-925
PART OF 105-8906 VALVE GP-BANK 6, 105-8907, 119-9481 VALVE GP-BANK 7
AN ATTACHMENT
VALVE GP-CONTROL
130-6520 VALVE GP-CONTROL
130-6520 VALVE GP-CONTROL -LIFT
S/N 1NR1-953; 1ZR1-925
PART OF 114-0048, 143-3698 VALVE GP-BANK 2, 114-0049, 143-3697 VALVE GP-BANK 3
Type 1
AN ATTACHMENT
VALVE GP-CONTROL
130-6520 VALVE GP-CONTROL
130-6520 VALVE GP-CONTROL -LIFT
S/N 1NR1-953; 1ZR1-925
PART OF 114-0048, 143-3698 VALVE GP-BANK 2, 114-0049, 143-3697 VALVE GP-BANK 3
Type 2
AN ATTACHMENT
VALVE GP-CONTROL
132-5134 VALVE GP-CONTROL
132-5134 VALVE GP-CONTROL -EXTENDABLE STICK
S/N 1NR1-953; 1ZR1-925
PART OF 105-8907, 119-9481 VALVE GP-BANK 7, 105-8908 VALVE GP-BANK 8
AN ATTACHMENT
VALVE GP-CONTROL
132-5302 VALVE GP-CONTROL
132-5302 VALVE GP-CONTROL -BOOM
S/N 1NR1-953; 1ZR1-925
PART OF 119-9481 VALVE GP-BANK 7
AN ATTACHMENT
VALVE GP-CONTROL
137-9467 VALVE GP-CONTROL
137-9467 VALVE GP-CONTROL -STABILIZER
S/N 1NR1-953; 1ZR1-925
PART OF 105-8906 VALVE GP-BANK 6, 105-8907 VALVE GP-BANK 7, 105-8908 VALVE GP-BANK 8
AN ATTACHMENT
VALVE GP-CONTROL
137-9468 VALVE GP-CONTROL
137-9468 VALVE GP-CONTROL -BOOM
S/N 1NR1-953; 1ZR1-925
PART OF 105-8906 VALVE GP-BANK 6, 105-8907 VALVE GP-BANK 7, 105-8908 VALVE GP-BANK 8
AN ATTACHMENT
VALVE GP-CONTROL
148-6516 VALVE GP-CONTROL
148-6516 VALVE GP-CONTROL -SWING
S/N 1NR1-953; 1ZR1-925
PART OF 105-8906 VALVE GP-BANK 6, 105-8907 VALVE GP-BANK 7, 105-8908 VALVE GP-BANK 8
AN ATTACHMENT
VALVE GP-CONTROL
6E-6287 VALVE GP-CONTROL
6E-6287 VALVE GP-CONTROL -EXTENDABLE STICK
S/N 1NR1-953; 1ZR1-925
PART OF 119-4003, 119-4004 CONVERSION GP-CONTROL VALVE
AN ATTACHMENT
VALVE GP-CONTROL
6E-6289 VALVE GP-CONTROL
6E-6289 VALVE GP-CONTROL -BACKHOE BUCKET
S/N 1NR1-953; 1ZR1-925
PART OF 105-8906 VALVE GP-BANK 6, 105-8907, 119-9481 VALVE GP-BANK 7, 105-8908 VALVE GP-BANK 8
AN ATTACHMENT
VALVE GP-LOAD CONTROL
VALVE GP-LOAD CONTROL
6E-3941 VALVE GP-LOAD CONTROL
6E-3941 VALVE GP-LOAD CONTROL -STICK
S/N 1NR1-953; 1ZR1-925
PART OF 121-8344, 121-8345, 136-7838 LINES GP-BOOM
AN ATTACHMENT
VALVE GP-LOAD CONTROL
6E-3942 VALVE GP-LOAD CONTROL
6E-3942 VALVE GP-LOAD CONTROL -BOOM
S/N 1NR1-953; 1ZR1-925
PART OF 121-8344, 121-8345, 121-8346, 121-9804, 136-7836, 136-7838 LINES GP-BOOM
AN ATTACHMENT
VALVE GP-LOAD CONTROL
9T-5454 VALVE GP-LOAD CONTROL
9T-5454 VALVE GP-LOAD CONTROL -LIFT
S/N 1NR1-953; 1ZR1-925
PART OF 135-3494 LINES GP-LIFT CYLINDER
VALVE GP-RELIEF
VALVE GP-RELIEF
6E-6283 VALVE GP-RELIEF
6E-6283 VALVE GP-RELIEF
S/N 1NR1-953; 1ZR1-925
PART OF 6E-6289 VALVE GP-CONTROL
AN ATTACHMENT
VALVE GP-SHUTOFF
139-1921 CONVERSION AR-CERTIFICATION
139-1921 CONVERSION AR-CERTIFICATION
S/N 1NR1-953; 1ZR1-925
CENTER PIVOT, STANDARD SHIFT
AN ATTACHMENT
147-3102 CONVERSION AR-CERTIFICATION
147-3102 CONVERSION AR-CERTIFICATION
S/N 1NR1-953; 1ZR1-925
CENTER PIVOT, POWER SHIFT, EUROPEAN COMMUNITY
AN ATTACHMENT
VALVE GP-SHUTOFF
138-1976 VALVE GP-SHUTOFF
138-1976 VALVE GP-SHUTOFF
S/N 1NR1-953; 1ZR1-925
PART OF 139-1921, 147-3102 CONVERSION AR-CERTIFICATION, 141-7885 VALVE GP-BACKHOE NEUTRALIZER, 147-6458, 147-6629 VALVE GP-SHUTOFF
AN ATTACHMENT
VALVE GP-SHUTOFF
147-6458 VALVE GP-SHUTOFF
147-6458 VALVE GP-SHUTOFF
S/N 1NR1-953
PART OF 147-9648, 147-9651 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
VALVE GP-SHUTOFF
147-6629 VALVE GP-SHUTOFF
147-6629 VALVE GP-SHUTOFF
S/N 1ZR1-925
PART OF 147-9646, 147-9647, 147-9649, 147-9650 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
169-7122 VALVE GP-SHUTTLE
169-7122 VALVE GP-SHUTTLE
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLATION
VALVE GP-SHUTTLE
8J-6875 VALVE GP-SHUTTLE
8J-6875 VALVE GP-SHUTTLE
S/N 1ZR1-925
PART OF 147-6629 VALVE GP-SHUTOFF
AN ATTACHMENT
VALVE GP-SOLENOID
VALVE & MTG GP-SOLENOID
138-1979 VALVE & MTG GP-SOLENOID
138-1979 VALVE & MTG GP-SOLENOID
S/N 1NR1-953; 1ZR1-925
PART OF 138-9796, 148-2301, 149-1062 LINES GP-COUPLER
AN ATTACHMENT
VALVE GP-BACKHOE NEUTRALIZER
141-7885 VALVE GP-BACKHOE NEUTRALIZER
141-7885 VALVE GP-BACKHOE NEUTRALIZER
S/N 1NR1-953; 1ZR1-925
AN ATTACHMENT
VALVE GP-SHUTOFF
138-1976 VALVE GP-SHUTOFF
138-1976 VALVE GP-SHUTOFF
S/N 1NR1-953; 1ZR1-925
PART OF 139-1921, 147-3102 CONVERSION AR-CERTIFICATION, 141-7885 VALVE GP-BACKHOE NEUTRALIZER, 147-6458, 147-6629 VALVE GP-SHUTOFF
AN ATTACHMENT
VALVE GP-SHUTOFF
147-6458 VALVE GP-SHUTOFF
147-6458 VALVE GP-SHUTOFF
S/N 1NR1-953
PART OF 147-9648, 147-9651 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
VALVE GP-SHUTOFF
147-6629 VALVE GP-SHUTOFF
147-6629 VALVE GP-SHUTOFF
S/N 1ZR1-925
PART OF 147-9646, 147-9647, 147-9649, 147-9650 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
VALVE GP-SOLENOID
138-1978 VALVE GP-SOLENOID
138-1978 VALVE GP-SOLENOID
S/N 1NR1-953; 1ZR1-925
PART OF 138-1979 VALVE & MTG GP-SOLENOID
AN ATTACHMENT
VALVE GP-SOLENOID
162-8174 VALVE GP-SOLENOID
162-8174 VALVE GP-SOLENOID
S/N 1NR1-953; 1ZR1-925
PART OF 169-6866 LINES GP-RIDE CONTROL
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Change To The Ride Control Accumulator Diameter
Change To The Ride Control Accumulator Diameter
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Ride Control Accumulator
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Systems Operation
Ride Control System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Testing and Adjusting
Ride Control Accumulator - Test and Charge
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
C-Series Backhoe Loaders Are Being Updated {1000,5077,6501,6504}
1999/02/08
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Operation and Maintenance Manual
Ride Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Testing and Adjusting
Ride Control - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
A Special Instruction For Installing Ride Control Kits Is now Available {5004}
1999/06/28
Operation and Maintenance Manual
Backhoe Extendable Stick Control (Foot Operated)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Four Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Foot Swing Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Standard Pattern) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Auxiliary Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Auxiliary Control (Foot Operated) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Loader Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Bracket Modification for Improved Control Groups{5063}
Bracket Modification for Improved Control Groups{5063}
Specifications
Control Valve (Lift)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Testing and Adjusting
Signal Resolver Network - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Three Special Instructions are now Available for Installing Auxiliary Lines Kits {5057}
2000/01/24
A New Washer Reduces Noise in the Pedals {5063}
2000/11/27
The Revised Special Instruction, REHS0325 , "Bracket Modification for Improved Control Groups" Can Be Ordered {5063}
2003/05/12
Operation and Maintenance Manual
Radiator Core - Clean
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Disassembly and Assembly
Radiator, Oil Cooler & Condenser
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Radiator, Oil Cooler & Condenser
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Service Magazine
Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Operation and Maintenance Manual
Drive Shaft Spline - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Service Magazine
Improvements To The Tubes (Lift Cylinder) Provides More Clearance For The Front Tires {5057}
1998/01/26
Special Instruction, REHS0377, Available For Installing Spacers On New Backhoe Loader Booms For The Fitup Of Hydraulic Lines{5057}
1999/06/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Operation and Maintenance Manual
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications
Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Service Letter-APD
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Extendible Stick Cylinder &amp; Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Correction To Backhoe Loader C-Series Parts Manuals{7222,7567}
1997/07/28
Improvements To The Tubes (Lift Cylinder) Provides More Clearance For The Front Tires {5057}
1998/01/26
New Stabilizer Pads Are Wider{7222}
1998/03/09
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Lubrication Of The Stabilizer Pad Pin On Backhoe Loaders {7528,7222,7581}
1999/01/25
Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28
New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04
New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05
A New Check Valve Reduces Voiding {5067, 5104}
2000/08/28
The Check Valve Has Been Relocated {5057, 5067, 5104}
2002/12/23
Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07
Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02
Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01
Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
New Stabilizer Pads Make Stabilizer Operation Quieter {5468, 7150, 7222}
2001/10/08
Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05
Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08
New Hydraulic Tubes Are Used in the Quick Coupler Lines Gp {5057, 5133, 6129}
2003/05/12
Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Operation and Maintenance Manual
Oil Filter - Inspect
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Hydraulic System Oil Filter - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Tank and Filter
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Improved Hydraulic Oil Filter Gives Superior Filtration {5068}
1997/04/14
Machines Shipped With Improved Hydraulic Oil Filters{5068}
1998/03/16
An Improved Hydraulic Filter Increases Filtration {5068}
2000/01/03
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Technical Information Bulletin
Limiting Hydraulic Oil Flow When Using Auxiliary Valves
Limiting Hydraulic Oil Flow When Using Auxiliary Valves
Operation and Maintenance Manual
Bucket Positioner
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Bucket Positioner
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Specifications
Bucket Positioner and Lift Kickout
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Disassembly and Assembly
Bucket Positioner &amp; Kickdown Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Improved Lever Assembly Allows Greater Clearance {5112,7117}
1997/05/12
Correction for Specifications of the Backhoe Linkage {5109, 5112, 6506}
2000/04/03
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Special Instruction
Field Installation of the 135-7200 Auxiliary Lines Kit {5057}
Field Installation of the 135-7200 Auxiliary Lines Kit {5057}
Field Installation of the 135-7198 Auxiliary Lines Kit {5057, 5057}
Field Installation of the 135-7198 Auxiliary Lines Kit {5057, 5057}
Field Installation of the 135-7199 Auxiliary Lines Kit {5057}
Field Installation of the 135-7199 Auxiliary Lines Kit {5057}
Field Installation of the 169-0005 Auxiliary Lines Kits on the C-2 Series of the 426C and 436C Backhoe Loaders{5057}
Field Installation of the 169-0005 Auxiliary Lines Kits on the C-2 Series of the 426C and 436C Backhoe Loaders{5057}
Contamination Control Guidelines
Procedure for &quot;Off-Board&quot; Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Procedure for "Off-Board" Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Service Magazine
A Special Instruction for Installing an Auxiliary Lines Kit is now Available {5051, 5057}
2000/03/20
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Installation of Spacers for the Fitup of Hydraulic Lines{5057}
Installation of Spacers for the Fitup of Hydraulic Lines{5057}
Service Magazine
Special Instruction, REHS0377, Available For Installing Spacers On New Backhoe Loader Booms For The Fitup Of Hydraulic Lines{5057}
1999/06/01
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04
New Hydraulic Tubes Are Used in the Quick Coupler Lines Gp {5057, 5133, 6129}
2003/05/12
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for &quot;Off-Board&quot; Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Procedure for "Off-Board" Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Improved Hydraulic Tube Assembly Increases Service Life {5057,5056,5070}
1997/05/05
Special Instruction, REHS0377, Available For Installing Spacers On New Backhoe Loader Booms For The Fitup Of Hydraulic Lines{5057}
1999/06/01
Various Hydraulic Connectors are Available for Machines and Work Tools {6129, 6700}
2001/05/07
A Special Instruction, REHS0973-01 , "Installation of New Dual Signal Network to Separate Hydraulic Signal of Loader and Backhoe" is Available {5057}
2001/01/15
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Operation and Maintenance Manual
Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Special Instruction
Installation of New Dual Signal Network to Separate Hydraulic Signal of Loader and Backhoe{5057}
Installation of New Dual Signal Network to Separate Hydraulic Signal of Loader and Backhoe{5057}
Technical Information Bulletin
Engine Stalling Due To Operating Technique
Engine Stalling Due To Operating Technique
Mechanical Control Vibration Level Reduction
Mechanical Control Vibration Level Reduction
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Magazine
Improved Hydraulic Tube Assembly Increases Service Life {5057,5056,5070}
1997/05/05
A Special Instruction, REHS0973-01 , "Installation of New Dual Signal Network to Separate Hydraulic Signal of Loader and Backhoe" is Available {5057}
2001/01/15
The Check Valve Has Been Relocated {5057, 5067, 5104}
2002/12/23
Operation and Maintenance Manual
Ride Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04
New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05
New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04
Three Special Instructions are now Available for Installing Auxiliary Lines Kits {5057}
2000/01/24
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25
Specifications
Pressure and Flow Compensator Valve
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Operation and Maintenance Manual
Drive Shaft Spline - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Technical Information Bulletin
Oil Leakage Occurs After Adjusting Pump Screws
Oil Leakage Occurs After Adjusting Pump Screws
Engine Stalling Due To Operating Technique
Engine Stalling Due To Operating Technique
Mechanical Control Vibration Level Reduction
Mechanical Control Vibration Level Reduction
Specifications
Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Signal Resolver Network
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Testing and Adjusting
Hydraulic Pump - Test and Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Engine, Torque Converter, Transmission &amp; Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Implement Pump
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Improved Hydraulic Tube Assembly Increases Service Life {5057,5056,5070}
1997/05/05
New Pumps For C-Series Backhoe Loaders{5070}
1998/05/04
Backhoe Loader Window Latch Rod Now Serviceable{7308}
1999/06/01
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
New Accelerator Control Alleviates Pump Cavitation {1265, 1276, 5055, 5070, 5073}
2000/04/17
Correction to Testing and Adjusting for the Test of the Torque Limiter {5070}
2001/04/23
Correction to Testing and Adjusting, SENR1272 for the High Pressure Stall Test {5070}
2001/05/14
Correction to Testing and Adjusting , "Hydraulic Pump - Test and Adjust" {5070}
2002/10/21
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
The Serviceability of Metering Pumps Has Been Limited {4312}
2005/12/19
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Systems Operation
Signal Resolver Network
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Operation and Maintenance Manual
Hydraulic System Oil Filter - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Hydraulic System Oil Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Hydraulic System Oil - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Specifications
Hydraulic Tank
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Hydraulic Tank and Mounting
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Tank and Filter
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for &quot;Off-Board&quot; Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Procedure for "Off-Board" Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Overfill Of Hydraulic Tank May Cause Oil Leakage {7479,1460}
1996/12/02
Improved Hydraulic Oil Filter Gives Superior Filtration {5068}
1997/04/14
Machines Shipped With Improved Hydraulic Oil Filters{5068}
1998/03/16
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for &quot;Off-Board&quot; Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Procedure for "Off-Board" Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Technical Information Bulletin
Limiting Hydraulic Oil Flow When Using Auxiliary Valves
Limiting Hydraulic Oil Flow When Using Auxiliary Valves
Regulate Oil Flow For Supplier Attachments
Regulate Oil Flow For Supplier Attachments
Specifications
Control Valve (Auxiliary)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Technical Information Bulletin
Regulate Oil Flow For Supplier Attachments
Regulate Oil Flow For Supplier Attachments
Systems Operation
Bank Valve (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Disassembly and Assembly
Loader Implement Control Group
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Correction to Parts Manual for the Bank Valve (Six) {5051}
2000/01/03
Three Special Instructions are now Available for Installing Auxiliary Lines Kits {5057}
2000/01/24
A Special Instruction for Installing an Auxiliary Lines Kit is now Available {5051, 5057}
2000/03/20
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05
A New Check Valve Reduces Voiding {5067, 5104}
2000/08/28
The Check Valve Has Been Relocated {5057, 5067, 5104}
2002/12/23
Technical Information Bulletin
Oil Leakage Occurs After Adjusting Pump Screws
Oil Leakage Occurs After Adjusting Pump Screws
Limiting Hydraulic Oil Flow When Using Auxiliary Valves
Limiting Hydraulic Oil Flow When Using Auxiliary Valves
Regulate Oil Flow For Supplier Attachments
Regulate Oil Flow For Supplier Attachments
Specifications
Control Valve (Lift)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Tilt)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Auxiliary)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Backhoe and Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Backhoe Bucket)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Swing)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Boom)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Backhoe and Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Control Valve (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Disassembly and Assembly
Loader Implement Control Group
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Backhoe &amp; Stabilizer Implement Control Valve
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Resolvers Used In C-Series Backhoe Loader {5481}
1999/08/30
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Serviceable Parts Are Available for the Swing Circuit Line Relief Valve {5454, 5480}
2000/02/28
A New O-Ring Seal Reduces Leakage from the End of the Spool {5051}
2000/12/18
Service Spools for Backhoe Valves {5051}
2002/01/28
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Service Magazine
Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Torque Specifications for the Orifice Plug in the Implement Control Valve {5051}
2011/05/05
Systems Operation
Load Control Valve (Boom or Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Load Control Valve (Lift)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Systems Operation
Makeup and Relief Valve
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Specifications
Priority Valve
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Priority Valve
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Systems Operation
Relief Valve (Line)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Makeup and Relief Valve
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Testing and Adjusting
Line Relief Valve - Test and Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
Correct the Load Relief Settings in Testing and Adjusting, SENR1272 {5117}
2000/01/03
Serviceable Parts Are Available for the Swing Circuit Line Relief Valve {5454, 5480}
2000/02/28
Seals for the Relief Valves on the Transmission {5117}
2001/06/04
Systems Operation
Ride Control System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Technical Information Bulletin
Engine Stalling Due To Operating Technique
Engine Stalling Due To Operating Technique
Service Magazine
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Operation and Maintenance Manual
Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Boom Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Specifications
Solenoid Valve (Ride Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22

Truck sale:

Caterpillar 426C
 
Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.
 
35.900 
Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung


Caterpillar 426C, Construction
22,500 
Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.
 
On Request 
Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT
Caterpillar 426C, Construction
28,000 
Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.