HYDRAULIC SYSTEM
CYLINDER GPLINES GP-STICK
LINES GP-HYDRAULIC
HYDRAULIC SYSTEM
CYLINDER GP#SEBP25980450
137-6399: LINES GP-COUPLER
137-6399 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLATION
PART OF 137-6398 CONVERSION AR-QUICK COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLATION
PART OF 137-6398 CONVERSION AR-QUICK COUPLER
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6V-0408 | [2] | SEAL-BONDED | |
2. | 6W-2888 | [2] | FITTING AS (QUICK DISCONNECT, MALE) | |
3. | 6W-2890 | [2] | CAP AS-DUST | |
4. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
5. | 122-6404 Y | [1] | CYLINDER & MTG GP-COUPLER | |
6. | 123-0431 I | [1] | HOSE AS | |
7. | 126-1084 | [2] | BRACKET-MOUNTING | |
8. | 126-4163 | [1] | BLOCK | |
9. | 126-7349 I | [1] | HOSE AS | |
10. | 127-5501 I | [1] | HOSE AS | |
11. | 130-7968 | [1] | TUBE AS | |
12. | 130-7969 | [1] | TUBE AS | |
13. | 130-7970 | [1] | COVER | |
14. | 131-1926 | [1] | BRACKET AS | |
15. | 131-1927 | [1] | BRACKET AS | |
16. | 131-7165 | [1] | TUBE AS | |
17. | 133-8610 | [1] | ELBOW | |
18. | 133-8912 Y | [1] | VALVE & MTG GP-COUPLER | |
19. | 133-9740 | [2] | CONNECTOR | |
20. | 2M-9780 | [8] | SEAL-O-RING | |
21. | 3J-1907 | [3] | SEAL-O-RING | |
22. | 3K-0360 | [3] | SEAL-O-RING | |
23. | 6V-7744 M | [12] | LOCKNUT (M10X1.5-THD) | |
24. | 6V-8397 | [6] | SEAL-O-RING | |
25. | 6V-8398 | [2] | SEAL-O-RING | |
26. | 6V-8626 | [3] | ELBOW | |
27. | 6V-8634 | [2] | CONNECTOR | |
28. | 6V-8724 | [2] | ELBOW | |
29. | 6V-8774 | [1] | TEE | |
30. | 6V-9003 | [1] | ELBOW | |
31. | 7J-9108 | [4] | SEAL-O-RING | |
32. | 8T-4121 | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
33. | 8T-4136 M | [12] | BOLT (M10X1.5X25-MM) | |
34. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
35. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
36. | 9M-8406 | [2] | CLIP (LOOP) | |
37. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
38. | 9X-2125 M | [3] | BOLT-LOCKING (M10X1.5X25-MM) | |
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25980451
138-9796: LINES GP-COUPLER
138-9796 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 139-9152, 139-9153, 143-3949, 143-3950 HYDRAULIC AR
AN ATTACHMENT
S/N 1NR1-953; 1ZR1-925
PART OF 139-9152, 139-9153, 143-3949, 143-3950 HYDRAULIC AR
AN ATTACHMENT
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7R-4897 E | SLEEVE-ABRASION (112CM) | ||
2. | 3S-2093 | [2] | STRAP-CABLE | |
3. | 5D-1026 | [2] | CLAMP-BAND | |
4. | 6V-0408 | [4] | SEAL-BONDED | |
5. | 6W-2888 | [2] | FITTING AS (QUICK DISCONNECT, MALE) | |
6. | 6W-2889 | [2] | FITTING AS (QUICK DISCONNECT, FEMALE) | |
(EACH INCLUDES) | ||||
9C-6250 | [1] | SEAL-O-RING | ||
9C-6251 | [1] | SEAL-O-RING | ||
7. | 6W-2890 | [4] | CAP AS-DUST | |
8. | 6W-2891 | [2] | PLUG AS | |
9. | 2J-6540 | [1] | CLAMP-HOSE | |
10. | 112-5839 | [1] | TUBE AS | |
11. | 112-5840 | [1] | TUBE AS | |
12. | 118-4639 I | [2] | HOSE AS | |
13. | 122-6404 Y | [1] | CYLINDER & MTG GP-COUPLER | |
14. | 123-0431 I | [1] | HOSE AS | |
15. | 128-7954 | [2] | BLOCK | |
16. | 130-8692 | [1] | BLOCK | |
17. | 133-9740 | [4] | CONNECTOR | |
18. | 138-1979 Y | [1] | VALVE & MTG GP-SOLENOID | |
19. | 138-7774 I | [2] | HOSE AS | |
20. | 138-7777 I | [2] | HOSE AS | |
21. | 138-7778 I | [1] | HOSE AS | |
22. | 138-7779 I | [1] | HOSE AS | |
23. | 138-7780 | [1] | BLOCK | |
24. | 138-7781 | [1] | BLOCK | |
25. | 138-7782 | [1] | BLOCK | |
26. | 138-7783 | [1] | BRACKET | |
27. | 138-7784 | [1] | BRACKET | |
28. | 140-3057 | [1] | TUBE AS | |
29. | 140-3058 | [1] | TUBE AS | |
30. | 140-3117 | [1] | COVER | |
31. | 2M-9780 | [8] | SEAL-O-RING | |
32. | 3D-2824 | [2] | SEAL-O-RING | |
33. | 3J-1907 | [5] | SEAL-O-RING | |
34. | 6V-7731 M | [2] | BOLT (M10X1.5X70-MM) | |
35. | 6V-7732 M | [4] | BOLT (M10X1.5X25-MM) | |
36. | 6V-8397 | [7] | SEAL-O-RING | |
37. | 6V-8398 | [10] | SEAL-O-RING | |
38. | 6V-8638 | [2] | CONNECTOR | |
39. | 6V-8713 | [1] | CONNECTOR | |
40. | 6V-8715 | [2] | CONNECTOR | |
41. | 6V-8721 | [2] | ELBOW | |
42. | 6V-8724 | [2] | ELBOW | |
43. | 6V-8774 | [1] | TEE | |
44. | 6V-9187 M | [2] | BOLT-LOCKING (M10X1.5X60-MM) | |
45. | 6V-9850 | [1] | ELBOW | |
46. | 7J-9108 | [2] | SEAL-O-RING | |
47. | 8T-0404 | [1] | ELBOW | |
48. | 8T-4121 | [24] | WASHER-HARD (11X21X2.5-MM THK) | |
49. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
50. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
51. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
52. | 8T-4201 M | [6] | BOLT-LOCKING (M10X1.5X20-MM) | |
53. | 9R-1004 | [14] | CLIP (TAB) | |
54. | 9R-1005 | [14] | CLIP (SLOT) | |
55. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
56. | 142-9408 | [2] | FITTING | |
57. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
58. | 4P-7429 | [1] | CLIP (LADDER) | |
E | ORDER BY THE CENTIMETER | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25980452
148-2301: LINES GP-COUPLER
148-2301 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
PART OF 139-9153, 143-3949, 143-3950, 143-3951, 143-3952 HYDRAULIC AR
AN ATTACHMENT
S/N 1NR1-953; 1ZR1-925
PART OF 139-9153, 143-3949, 143-3950, 143-3951, 143-3952 HYDRAULIC AR
AN ATTACHMENT
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3S-2093 | [1] | STRAP-CABLE | |
2. | 6W-2888 | [2] | FITTING AS (QUICK DISCONNECT, MALE) | |
3. | 6W-2890 | [2] | CAP AS-DUST | |
4. | 7K-1181 | [2] | STRAP-CABLE | |
5. | 112-5839 | [1] | TUBE AS | |
6. | 112-5840 | [1] | TUBE AS | |
7. | 112-5841 | [1] | TUBE AS | |
8. | 112-5842 | [1] | TUBE AS | |
9. | 122-6404 Y | [1] | CYLINDER & MTG GP-COUPLER | |
10. | 122-7272 | [1] | BLOCK | |
11. | 123-0431 I | [1] | HOSE AS | |
12. | 128-0180 | [1] | VALVE GP-DIVERTER | |
13. | 128-4328 | [1] | FILM-IDENTIFICATION | |
14. | 138-1979 Y | [1] | VALVE & MTG GP-SOLENOID | |
15. | 138-7779 I | [1] | HOSE AS | |
16. | 140-3117 | [1] | COVER | |
17. | 148-2302 I | [1] | HOSE AS | |
18. | 148-2303 I | [1] | HOSE AS | |
19. | 148-2304 I | [1] | HOSE AS | |
20. | 148-2305 | [1] | BRACKET | |
21. | 148-2306 | [1] | BRACKET | |
22. | 148-5367 | [2] | PLATE AS | |
23. | 148-7208 | [1] | COVER | |
24. | 148-8197 I | [1] | HOSE AS | |
25. | 151-4841 | [2] | BLOCK | |
26. | 3D-2824 | [2] | SEAL-O-RING | |
26A. | 8T-8897 | [2] | ADAPTER | |
26B. | 163-3343 | [2] | SEAL | |
27. | 168-4510 M | [2] | BOLT (M10X1.5X70-MM) | |
28. | 180-2531 I | [2] | HOSE AS | |
29. | 2M-9780 | [3] | SEAL-O-RING | |
29A. | 6V-8397 | [3] | SEAL-O-RING | |
29B. | 6V-8715 | [3] | CONNECTOR | |
30. | 6V-8398 | [2] | SEAL-O-RING | |
30A. | 6V-8633 | [2] | CONNECTOR | |
30B. | 3D-2824 | [2] | SEAL-O-RING | |
31. | 3D-2824 | [1] | SEAL-O-RING | |
31A. | 6V-8713 | [1] | CONNECTOR | |
31B. | 7J-9108 | [1] | SEAL-O-RING | |
32. | 6V-8397 | [1] | SEAL-O-RING | |
32A. | 6V-9850 | [1] | ELBOW | |
33. | 3J-1907 | [1] | SEAL-O-RING | |
33A. | 4J-5477 | [1] | SEAL-O-RING | |
33B. | 6V-8627 | [1] | ELBOW | |
34. | 6V-8397 | [2] | SEAL-O-RING | |
34A. | 3J-1907 | [2] | SEAL-O-RING | |
34B. | 6V-8724 | [2] | ELBOW | |
35. | 3D-2824 | [1] | SEAL-O-RING | |
35A. | 7J-9108 | [1] | SEAL-O-RING | |
35B. | 8T-0404 | [1] | ELBOW | |
36. | 3J-1907 | [1] | SEAL-O-RING | |
36A. | 6V-8397 | [2] | SEAL-O-RING | |
36B. | 6V-8774 | [1] | TEE | |
37. | 5P-7465 | [4] | CLIP (TAB) | |
38. | 6V-1249 | [4] | GROMMET (22-MM ID)(22.00MM'OD) | |
39. | 6V-8398 | [6] | SEAL-O-RING | |
40. | 8T-4121 | [28] | WASHER-HARD (11X21X2.5-MM THK) | |
41. | 8T-4136 CM | [11] | BOLT (M10X1.5X25-MM) | |
42. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
43. | 8T-4201 M | [4] | BOLT-LOCKING (M10X1.5X20-MM) | |
44. | 8T-4646 | [4] | CLIP (SLOT) | |
45. | 9R-1004 | [10] | CLIP (TAB) | |
46. | 9R-1005 | [10] | CLIP (SLOT) | |
47. | 9X-2125 M | [4] | BOLT-LOCKING (M10X1.5X25-MM) | |
130-6905 F | [1] | FILM-WARNING (QUICK COUPLER PIN) | ||
C | CHANGE FROM PREVIOUS TYPE | |||
F | NOT SHOWN | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25980453
149-1062: LINES GP-COUPLER
149-1062 LINES GP-COUPLER
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLED
PART OF 144-2823 CONVERSION AR-QUICK COUPLER
AN ATTACHMENT
S/N 1NR1-953; 1ZR1-925
FIELD INSTALLED
PART OF 144-2823 CONVERSION AR-QUICK COUPLER
AN ATTACHMENT
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
130-6905 F | [1] | FILM-WARNING (QUICK COUPLER PIN) | ||
2. | 6W-2888 | [2] | FITTING AS (QUICK DISCONNECT, MALE) | |
3. | 6W-2890 | [2] | CAP AS-DUST | |
4. | 122-6404 Y | [1] | CYLINDER & MTG GP-COUPLER | |
5. | 122-7272 | [1] | BLOCK | |
6. | 123-0431 I | [1] | HOSE AS | |
7. | 128-0180 | [1] | VALVE GP-DIVERTER | |
128-0187 | [1] | KIT-HANDLE | ||
8. | 128-4328 | [1] | FILM-IDENTIFICATION | |
9. | 138-1979 Y | [1] | VALVE & MTG GP-SOLENOID | |
10. | 138-7779 I | [1] | HOSE AS | |
11. | 140-3117 | [1] | COVER | |
12. | 148-2302 I | [1] | HOSE AS | |
13. | 148-2303 I | [1] | HOSE AS | |
14. | 148-2304 I | [1] | HOSE AS | |
15. | 148-2305 | [1] | BRACKET | |
16. | 148-2306 | [1] | BRACKET | |
17. | 148-5367 | [2] | PLATE AS | |
111-0483 M | [1] | BOSS (M10X1.5-THD) | ||
18. | 148-7208 | [1] | COVER | |
19. | 148-8197 I | [1] | HOSE AS | |
20. | 2M-9780 | [3] | SEAL-O-RING | |
20A. | 6V-8397 | [3] | SEAL-O-RING | |
20B. | 6V-8715 | [3] | CONNECTOR | |
21. | 3D-2824 | [2] | SEAL-O-RING | |
21A. | 6V-8398 | [2] | SEAL-O-RING | |
21B. | 6V-8633 | [2] | CONNECTOR | |
22. | 6V-8397 | [1] | SEAL-O-RING | |
22A. | 6V-9850 | [1] | ELBOW | |
23. | 3J-1907 | [1] | SEAL-O-RING | |
23A. | 4J-5477 | [1] | SEAL-O-RING | |
23B. | 6V-8627 | [1] | ELBOW | |
24. | 3J-1907 | [2] | SEAL-O-RING | |
24A. | 6V-8397 | [2] | SEAL-O-RING | |
24B. | 6V-8724 | [2] | ELBOW | |
25. | 3J-1907 | [1] | SEAL-O-RING | |
25A. | 6V-8397 | [2] | SEAL-O-RING | |
25B. | 6V-8774 | [1] | TEE | |
26. | 3D-2824 | [2] | SEAL-O-RING | |
26A. | 8T-8897 | [2] | ADAPTER | |
26B. | 163-3343 | [2] | SEAL | |
27. | 5P-7465 | [4] | CLIP (TAB) | |
28. | 6V-1249 | [4] | GROMMET (22-MM ID) | |
29. | 6V-8398 | [2] | SEAL-O-RING | |
30. | 168-4510 M | [2] | BOLT (M10X1.5X70-MM) | |
31. | 8T-4121 | [18] | WASHER-HARD (11X21X2.5-MM THK) | |
32. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
33. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
34. | 3S-2093 | [1] | STRAP-CABLE | |
35. | 8T-4201 M | [4] | BOLT-LOCKING (M10X1.5X20-MM) | |
36. | 8T-4646 | [4] | CLIP (SLOT) | |
37. | 9X-2125 M | [4] | BOLT-LOCKING (M10X1.5X25-MM) | |
F | NOT SHOWN | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP25980454
9R-8784: LINES GP-EXTENDABLE STICK
9R-8784 LINES GP-EXTENDABLE STICK
S/N 1NR1-953; 1ZR1-925
PART OF 110-5924 STICK AR-EXTENDABLE
AN ATTACHMENT
S/N 1NR1-953; 1ZR1-925
PART OF 110-5924 STICK AR-EXTENDABLE
AN ATTACHMENT
#SEBP25980455
119-8154: LINES GP-HYDRAULIC
119-8154 LINES GP-HYDRAULIC
S/N 1NR1-953
ALL WHEEL STEER, ALL WHEEL DRIVE
PART OF 118-9116, 118-9118, 143-1778, 143-1779 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
S/N 1NR1-953
ALL WHEEL STEER, ALL WHEEL DRIVE
PART OF 118-9116, 118-9118, 143-1778, 143-1779 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
#SEBP25980456
120-9582: LINES GP-HYDRAULIC
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1P-3703 | [1] | SEAL-RECTANGULAR | |
2. | 1P-3709 | [1] | SEAL-RECTANGULAR | |
3. | 3E-7419 | [1] | CLAMP-HOSE | |
4. | 5D-1026 | [2] | CLAMP-BAND | |
5. | 6V-0484 | [1] | ELBOW | |
6. | 6V-0852 | [2] | CAP-DUST | |
7. | 6V-3965 | [2] | FITTING (QUICK DISCONNECT) | |
8. | 6V-5653 | [2] | ELBOW (7/8-14-THD) | |
9. | 5P-4868 | [2] | CLAMP-HOSE | |
10. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
11. | 101-1787 | [1] | TEE AS | |
12. | 114-4777 | [1] | BRACKET AS | |
13. | 114-5535 | [1] | HOSE | |
14. | 114-5536 | [1] | FLANGE | |
15. | 9M-8406 | [2] | CLIP (LOOP) | |
16. | 117-3232 I | [1] | HOSE AS | |
17. | 117-3235 I | [1] | HOSE AS | |
18. | 117-3240 I | [1] | HOSE AS | |
19. | 117-3244 I | [1] | HOSE AS | |
20. | 121-2903 | [1] | FLANGE | |
21. | 5P-1505 E | HOSE (62CM) | ||
22. | 2M-9780 | [3] | SEAL-O-RING | |
23. | 3D-2824 | [1] | SEAL-O-RING | |
24. | 3J-1907 | [4] | SEAL-O-RING | |
25. | 3J-7354 | [2] | SEAL-O-RING | |
26. | 4J-5477 | [4] | SEAL-O-RING | |
27. | 5K-9090 | [4] | SEAL-O-RING | |
28. | 5P-1506 E | HOSE (129CM) | ||
29. | 6V-8641 | [1] | CONNECTOR | |
30. | 6V-8647 | [1] | CONNECTOR | |
31. | 6V-8785 | [1] | TEE | |
32. | 6V-9007 | [1] | ELBOW | |
33. | 6V-9746 | [2] | SEAL-O-RING | |
34. | 6V-9849 | [1] | ELBOW | |
35. | 6V-9854 | [1] | ELBOW (SWIVEL) | |
36. | 7D-7233 | [5] | CLIP (LOOP) | |
37. | 7M-8485 | [2] | SEAL-O-RING | |
38. | 7X-2550 M | [1] | BOLT (M12X1.75X110-MM) | |
39. | 4D-7388 | [1] | CLIP (LOOP) | |
40. | 110-2445 | [3] | CLAMP-HOSE | |
41. | 8T-4121 | [18] | WASHER-HARD (11X21X2.5-MM THK) | |
42. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
43. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
44. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
45. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
46. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
47. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
48. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
49. | 8T-4910 M | [2] | BOLT (M12X1.75X60-MM) | |
50. | 8T-6356 | [1] | TEE-O-RING PORT | |
51. | 6V-1889 | [1] | CLIP (LOOP) | |
E | ORDER BY THE CENTIMETER | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART |
#SEBP25980457
121-8337: LINES GP-HYDRAULIC
121-8337 LINES GP-HYDRAULIC
S/N 1NR1-953; 1ZR1-925
1 CIRCUIT
PART OF 121-8297, 121-8298, 121-8305 BACKHOE AR-EXTENDABLE STICK, 121-8307, 121-8308, 121-8309, 121-8321 BACKHOE AR-STANDARD STICK, 106-6253, 119-4005 HYDRAULIC AR
AN ATTACHMENT
S/N 1NR1-953; 1ZR1-925
1 CIRCUIT
PART OF 121-8297, 121-8298, 121-8305 BACKHOE AR-EXTENDABLE STICK, 121-8307, 121-8308, 121-8309, 121-8321 BACKHOE AR-STANDARD STICK, 106-6253, 119-4005 HYDRAULIC AR
AN ATTACHMENT
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 116-2301 | [1] | TUBE AS | |
2. | 116-2302 | [1] | TUBE AS | |
3. | 3D-2824 | [2] | SEAL-O-RING | |
4. | 6V-8398 | [2] | SEAL-O-RING | |
5. | 6V-8713 | [2] | CONNECTOR | |
6. | 7J-9108 | [2] | SEAL-O-RING | |
7. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
8. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
9. | 9R-1004 | [2] | CLIP (TAB) | |
10. | 9R-1005 | [2] | CLIP (SLOT) | |
M | METRIC PART |
#SEBP25980458
145-4915: LINES GP-HYDRAULIC
145-4915 LINES GP-HYDRAULIC
S/N 1NR454-953; 1ZR426-925
PART OF 143-1796 HYDRAULIC AR
S/N 1NR454-953; 1ZR426-925
PART OF 143-1796 HYDRAULIC AR
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1P-3703 | [1] | SEAL-RECTANGULAR | |
2. | 1P-3709 | [1] | SEAL-RECTANGULAR (63.9MM ID) | |
3. | 5D-1026 | [2] | CLAMP-BAND | |
4. | 5P-4868 | [2] | CLAMP-HOSE | |
5. | 6V-0852 | [1] | CAP-DUST | |
6. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
7. | 7K-1181 | [1] | STRAP-CABLE | |
8. | 8T-6675 | [1] | CLAMP-HOSE | |
9. | 110-2445 | [3] | CLAMP-HOSE | |
10. | 114-4777 | [1] | BRACKET AS | |
11. | 114-5536 | [1] | FLANGE | |
12. | 117-3235 I | [1] | HOSE AS | |
13. | 117-3240 I | [1] | HOSE AS | |
14. | 121-2903 | [1] | FLANGE | |
15. | 138-9755 | [1] | HOSE | |
16. | 146-7276 I | [1] | HOSE AS | |
17. | 146-8958 | [1] | FITTING | |
18. | 159-0186 | [4] | CLAMP-HOSE | |
19. | 148-8347 | [1] | ELBOW AS | |
3D-2824 | [1] | SEAL-O-RING | ||
6V-9007 | [1] | ELBOW | ||
6V-9746 | [1] | SEAL-O-RING | ||
20. | 148-8352 | [1] | ELBOW AS | |
5K-9090 | [1] | SEAL-O-RING | ||
6V-9854 | [1] | ELBOW (SWIVEL) | ||
21. | 148-8410 | [1] | PLUG AS | |
2M-9780 | [1] | SEAL-O-RING | ||
9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | ||
22. | 148-8422 | [1] | TEE AS | |
5K-9090 | [1] | SEAL-O-RING | ||
6V-9746 | [1] | SEAL-O-RING | ||
7M-8485 | [1] | SEAL-O-RING | ||
8T-6356 | [1] | TEE-O-RING PORT | ||
23. | 148-8431 | [1] | TEE AS | |
5K-9090 | [2] | SEAL-O-RING | ||
6V-8785 | [1] | TEE | ||
7M-8485 | [1] | SEAL-O-RING | ||
24. | 150-3027 | [2] | ELBOW AS | |
2M-9780 | [2] | SEAL-O-RING | ||
6V-5653 | [2] | ELBOW (7/8-14-THD) | ||
25. | 150-3065 | [1] | ELBOW AS | |
3J-1907 | [1] | SEAL-O-RING | ||
6V-0484 | [1] | ELBOW | ||
26. | 3J-1907 | [2] | SEAL-O-RING | |
27. | 4D-7388 | [1] | CLIP (LOOP) | |
28. | 5D-0718 | [1] | CLIP (LOOP) | |
29. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
30. | 6V-1889 | [1] | CLIP (LOOP) | |
31. | 7D-7233 | [2] | CLIP (LOOP) | |
32. | 7X-2550 M | [1] | BOLT (M12X1.75X110-MM) | |
33. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
34. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
35. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
36. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
37. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
38. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
39. | 8T-4198 M | [4] | BOLT (M10X1.5X100-MM) | |
40. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
41. | 8T-4910 M | [2] | BOLT (M12X1.75X60-MM) | |
42. | 8T-7529 | [2] | CLIP | |
43. | 9M-8406 | [1] | CLIP (LOOP) | |
44. | 5P-1505 E | HOSE (70-CM) | ||
45. | 5P-1506 E | HOSE (55-CM) | ||
46. | 136-1955 E | HOSE (192-CM) | ||
E | ORDER BY THE CENTIMETER | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART |
#SEBP25980459
146-5129: LINES GP-HYDRAULIC
146-5129 LINES GP-HYDRAULIC
S/N 1NR1-953; 1ZR1-925
PART OF 145-5895, 145-5896 SUPPRESSION AR-SOUND
AN ATTACHMENT
S/N 1NR1-953; 1ZR1-925
PART OF 145-5895, 145-5896 SUPPRESSION AR-SOUND
AN ATTACHMENT
Parts for your 426C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
2. | 126-3865 | [1] | PLATE AS | |
3. | 147-2668 I | [1] | HOSE AS | |
4. | 147-2669 | [1] | TUBE AS | |
5. | 7D-7233 | [1] | CLIP (LOOP) | |
6. | 5K-9090 | [1] | SEAL-O-RING | |
7. | 6V-8785 | [1] | TEE | |
7A. | 5K-9090 | [2] | SEAL-O-RING | |
7B. | 7M-8485 | [1] | SEAL-O-RING | |
8. | 6V-9512 | [1] | PLUG (1-7/16-12-THD) | |
8A. | 5K-9090 | [1] | SEAL-O-RING | |
9. | 7M-8485 | [1] | SEAL-O-RING | |
10. | 7X-2550 M | [1] | BOLT (M12X1.75X110-MM) | |
11. | 8T-1889 | [1] | CLIP (SLOT) | |
12. | 8T-1890 | [1] | CLIP (TAB) | |
13. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
14. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
15. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
16. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART |
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications
Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Service Letter-APD
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Extendible Stick Cylinder & Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Improvements To The Tubes (Lift Cylinder) Provides More Clearance For The Front Tires {5057}
1998/01/26
1998/01/26
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
1998/06/08
Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07
2001/05/07
Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05
2001/11/05
Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25
2005/04/25
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}