AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130-5392 PUMP GP-FUEL INJECTION S/N 5HK35900-99999 PART OF 130-5393 PUMP GP-FUEL INJECTION ALSO AN ATTACHMENT 436C


FUEL SYSTEM
PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
TANK GP-FUEL
BASIC ENGINE
PULLEY GP

BACKHOE LOADER 436C BACKHOE LOADER 1FR
 436C Backhoe Loader Center Pivot, Single Tilt 1FR00001-01415 (MACHINE) POWERED BY 3054 Engine SEBP2599 436C 1FR   (1996)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-5392 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-5393 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7107 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7112 PUMP GP-FUEL INJECTION
 

#SEBP25990160
 

130-5392: PUMP GP-FUEL INJECTION

130-5392 PUMP GP-FUEL INJECTION
S/N 5HK35900-99999
PART OF 130-5393 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00201162 SEBP2599
1305392 PUMP GP-FUEL INJECTION Parts scheme 1305392 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-2536 [1] HOUSING  
2. 110-5365 [1] WASHER  
3. 110-5366 [1] WASHER  
4. 110-5367 [1] RING  
5. 118-8386 [1] SHAFT  
6. 116-8564 [1] KEY  
7. 116-7061 [2] SEAL  
8. 116-7062 [1] PLATE  
9. 116-7063 [2] BOLT  
10. 110-5375 [1] COVER  
11. 110-5374 [1] GASKET  
12. 116-8571 [2] BOLT  
13. 116-8569 [1] BOLT  
    -OR-
  149-2537 [1] BOLT  
    -OR-
  149-2538 [1] BOLT  
    -OR-
  149-2540 [1] BOLT  
    -OR-
  149-2542 [1] BOLT  
    -OR-
  149-2544 [1] BOLT  
14. 110-5370 [2] BOLT  
15. 149-2545 [1] BOLT  
16. 116-7947 [4] SEAL  
17. 293-3719 [1] BOLT  
18. 116-7065 [1] SEAL  
19. 116-7066 [1] PLUG  
20. 110-5377 [1] BOLT  
21. 116-7067 [2] SEAL  
22. 117-1280 [1] COVER  
23. 116-7068 [1] GASKET  
24. 116-7086 [2] WASHER  
25. 116-7069 [2] LOCKNUT  
26. 116-7070 [2] TERMINAL  
27. 116-7071 [2] WASHER  
28. 116-7072 [2] WASHER  
29. 110-5380 [3] BOLT  
30. 135-5016 [1] CAP  
31. 149-2554 [1] BEARING  
32. 132-7925 [1] CONNECTOR  
33. 116-7073 [1] SEAL  
34. 135-5017 [1] CAP  
35. 149-2548 [1] CAP  
36. 110-5400 [1] SCREEN (INJECTION PUMP)  
37. 110-5401 [1] PLUG  
38. 110-5402 [1] SPRING  
39. 110-5403 [1] PISTON  
40. 116-8575 [1] REGULATOR (FUEL FLOW)  
41. 110-5410 [1] PIN  
42. 116-7075 [1] SEAL  
43. 116-7076 [1] RING  
44. 110-5405 [1] BLADE  
45. 110-5406 [1] LINER  
46. 110-5409 [2] SPRING  
47. 110-5407 [1] RETAINER  
48. 116-7078 [1] SEAL  
49. 149-2549 [1] ROTOR  
50. 116-7079 [1] RING  
51. 116-8593 [1] RING  
52. 149-2547 [1] CAP  
53. 110-5396 [2] BOLT  
54. 126-6588 [1] VALVE  
55. 135-5033 [1] SPRING  
56. 116-7082 [1] STOP  
57. 116-7081 [1] BOLT  
58. 116-8594 [4] CONNECTOR  
59. 116-8596 [1] BOLT  
60. 116-7083 [1] SEAL  
61. 116-8595 [1] PLATE  
62. 116-7084 [2] PLUNGER  
63. 110-5398 [2] RETAINER  
64. 110-5397 [2] ROLLER  
65. 116-7085 [2] NUT  
66. 149-2546 [1] NUT  
67. 116-7088 [1] RETAINER AS  
68. 116-7090 [1] RING  
69. 135-5073 [1] WASHER  
70. 116-7092 [6] WEIGHT  
71. 116-7093 [1] SLEEVE  
72. 116-7094 [1] ARM  
73. 124-5590 [1] SPRING  
74. 116-8607 [1] RETAINER  
75. 116-7097 [1] SPRING  
76. 116-7098 [1] GUIDE  
77. 116-7099 [1] WASHER  
78. [1] STUD  
79. 116-7101 [1] NUT  
80. 132-7926 [1] SEAL  
81. 116-7103 [1] SHAFT  
82. 117-1278 [1] ARM  
83. 116-8584 [1] SHIM  
84. 116-8585 [1] SPRING  
85. 116-7107 [1] VALVE  
86. 135-5018 [1] SHAFT  
87. 117-1286 [2] BOLT  
88. 116-8618 [2] NUT  
89. 110-5415 [1] SPRING  
90. 116-7112 [2] SPACER  
91. 116-7947 [3] SEAL  
92. 116-7114 [1] LEVER  
93. 116-7115 [1] SPRING  
94. 116-7116 [1] RETAINER  
95. 116-7117 [1] BOLT  
96. 116-7118 [1] LEVER  
97. 117-1287 [1] CLIP  
98. 116-8620 [1] SHAFT  
99. 117-1091 [1] HOOK AS  
  116-7121 [1] HOOK  
100. 116-7122 [1] BOLT  
101. 116-7123 [1] WASHER  
102. 116-7124 [1] SPRING  
103. 116-7125 [1] LINK  
104. 116-7126 [1] PLUG  
105. 110-5412 [1] RING  
106. 116-7127 [1] SEAL  
107. 149-2558 [1] PISTON  
108. 110-5413 [2] WASHER  
109. 149-2559 [1] PISTON  
110. 149-2560 [1] SPRING  
111. 116-7135 [1] NUT  
112. 110-5416 [1] GUIDE  
113. 116-7130 [2] SEAL-O-RING  
114. 116-8630 [2] SEAL-O-RING  
115. 116-7132 [1] PLUG  
116. 116-7133 [1] BOLT  
   
    AVAILABLE REPAIR KIT(S):
  101-2986 [1] KIT-PUMP GASKET (FUEL INJECTION PUMP)  
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  133-3760 [1] KIT-BUSHING (FUEL INJECTION PUMP)  
  133-3759 [1] KIT-BUSHING (FUEL INJECTION PUMP)  
 

#SEBP25990161
 

130-5393: PUMP GP-FUEL INJECTION

130-5393 PUMP GP-FUEL INJECTION
S/N 5HK35900-99999
PART OF 106-5003, 153-5365 ENGINE AR
ALSO AN ATTACHMENT
i00201163 SEBP2599
1305393 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-5392 Y [1] PUMP GP-FUEL INJECTION  
2. 067-7006 [1] SEAL  
3. 7W-4560 [1] GASKET-FUEL PUMP  
4. 101-3877 [3] STUD (M8X1.25X37-MM)  
5. 6I-0291 M [3] NUT (M8X1.25-THD)  
6. 118-9114 [1] GEAR  
7. 172-0051 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
8. 166-8797 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
9. 101-3890 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
10. 101-3891 [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
11. 6I-1214 [1] ATOMIZER AS-FUEL  
  105-2003 [1] HOLDER  
12. 105-2002 [1] NOZZLE  
13. 7W-0187 [4] SEAL  
14. 033-7873 [4] WASHER (10.01X20.85X2.03-MM THK)  
15. 101-3895 M [8] BOLT (M8X1.25X35-MM)  
16. 101-3896 [1] LINE-DRAIN  
17. 067-6980 [1] BOLT (M8X1.25-THD)  
18. 067-7011 [8] WASHER (0.323X0.439X0.031-IN THK)  
19. 067-6312 [3] BOLT  
20. 7C-9255 [4] CLAMP  
21. 101-3892 [2] CLIP  
22. 101-3893 [1] CLIP  
24. 111-3422 M [1] NUT (M14X1.5-THD)  
25. 111-3423 [1] WASHER  
26. 5P-6627 BD LOCKWIRE  
27. 7W-0186 [4] SPACER (21.6X26.8X3.2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25990162
 

148-7107: PUMP GP-FUEL INJECTION

148-7107 PUMP GP-FUEL INJECTION
S/N 5HK35900-99999
PART OF 148-7112 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i00651055 SEBP2599
1487107 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-2161 [1] SEAL-O-RING  
2. 137-6396 [1] LOCKNUT  
3. 192-9155 [1] CONTROL AS-FUEL RATIO  
3A. 8D-5294 [2] RING  
  116-8645 [1] NUT  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
 

#SEBP25990163
 

148-7112: PUMP GP-FUEL INJECTION

148-7112 PUMP GP-FUEL INJECTION
S/N 5HK35900-99999
PART OF 122-8805 ENGINE AR-PRIMARY
AN ATTACHMENT
i00706658 SEBP2599
1487112 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-7107 Y [1] PUMP GP-FUEL INJECTION  
2. 5P-6627 D LOCKWIRE (0.1M)  
3. 6I-0291 M [3] NUT (M8X1.25-THD)  
4. 033-7625 [1] ELBOW  
5. 067-6264 [1] FITTING-FLARED  
6. 067-6265 [1] FITTING-BRASS  
7. 067-7006 [1] SEAL  
8. 101-3877 [3] STUD (M8X1.25X37-MM)  
9. 107-2348 [2] CLIP  
10. 154-8055 [1] HOSE  
11. 124-3713 [1] CONNECTION  
12. 124-3714 [3] BOLT  
13. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
14. 140-8718 [4] WASHER  
15. 140-8719 [1] LINE-LEAKOFF  
16. 204-7853 [8] WASHER  
17. 169-5326 [1] SWITCH-TEMPERATURE  
18. 162-0807 [1] LEAD  
19. 154-6016 [1] GEAR-PUMP (56-TEETH)  
20. 186-5002 [1] TUBE AS  
21. 148-7108 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
22. 148-7110 [1] HOLDER  
23. 148-7111 [1] NOZZLE  
24. 140-8713 [2] CLIP  
25. 140-8714 [1] CLIP  
26. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
27. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
28. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
29. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
   
  121-4592 F [2] CLIP  
  121-4593 F [1] CLIP  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25990164
 

7E-4636: SEPARATOR GP-WATER

7E-4636 SEPARATOR GP-WATER
S/N 8TN1-924; 1FR1-1415
PART OF 143-1311, 7E-4629 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
i00683882 SEBP2599
7E4636 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7092 Y [1] FILTER GP-WATER SEP & FUEL  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
4. 130-7964 [1] TUBE AS  
5. 127-8167 [2] CLIP  
6. 9R-2603 [1] TUBE AS  
7. 4H-2494 [3] SLEEVE-FITTING  
8. 033-7849 [2] PLUG  
9. 032-8100 [2] WASHER (0.531X0.718X0.064-IN THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25990165
 

106-1379: TANK GP-FUEL

106-1379 TANK GP-FUEL
S/N 8TN1-358; 1FR1-1415
PART OF 121-3859, 8Y-8003 CHASSIS AR
i00200822 SEBP2599
1061379 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4278 [4] CLAMP-HOSE  
2. 2R-8997 [1] PLUG  
3. 6K-5967 [1] CLIP  
4. 9R-7240 [1] GASKET  
5. 112-5365 [1] TUBE AS  
6. 112-5367 [1] TUBE AS  
7. 116-4808 [1] TUBE  
8. 118-6845 [1] TANK AS  
  7X-2644 [1] CAP  
  106-8020 [1] GASKET  
  118-6848 [1] PLATE  
  123-4950 M [8] SCREW-PAN HEAD (M6X1X16-MM)  
  7T-1099 [1] LINK  
9. 118-6846 [1] TREAD  
10. 118-6847 [1] STEP AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
11. 118-6852 [1] PLATE  
12. 123-4950 M [2] SCREW-PAN HEAD (M6X1X16-MM)  
13. 128-2875 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [2] NUT (10-32-THD)  
  9X-8862 [2] LOCKWASHER  
14. 2B-2404 [2] CLIP  
15. 3J-7354 [2] SEAL-O-RING  
16. 4J-5477 [2] SEAL-O-RING  
17. 6V-8647 [2] CONNECTOR  
18. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
20. 8T-4189 M [7] BOLT (M8X1.25X20-MM)  
21. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
22. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
23. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
25. 5P-6442 E HOSE (88CM)  
26. 5P-6442 E HOSE (76CM)  
27. 5P-4116 [7] WASHER-HARD (8.8X20.5X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP25990166
 

106-1379: TANK GP-FUEL

106-1379 TANK GP-FUEL
S/N 8TN359-924; 1FR223-1415
PART OF 121-3859, 143-1770, 143-1771, 8Y-8003 CHASSIS AR
i00679094 SEBP2599
1061379 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6442 BE HOSE (157CM)  
2. 159-1878 [1] TANK AS  
  7X-2644 F [1] CAP  
2A. 106-8020 [1] GASKET  
2B. 118-6848 [1] PLATE  
2C. 123-4950 M [8] SCREW-PAN HEAD (M6X1X16-MM)  
3. 1P-4278 [4] CLAMP-HOSE  
4. 9R-7240 [1] GASKET  
5. 116-4808 [1] TUBE  
6. 118-6846 [1] TREAD  
7. 118-6847 [1] STEP AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
8. 123-4950 M [2] SCREW-PAN HEAD (M6X1X16-MM)  
9. 128-2875 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [2] NUT (10-32-THD)  
  9X-8862 [2] LOCKWASHER  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  187-8936 [1] SENDER AS-FUEL LEVEL  
10. 149-7678 [1] TUBE AS  
11. 149-7679 [1] TUBE AS  
12. 149-7681 [1] PLATE AS  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
13. 2B-2404 [2] CLIP  
14. 5P-4116 [7] WASHER-HARD (8.8X20.5X2-MM THK)  
15. 6K-5967 [1] CLIP  
16. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
18. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
19. 8T-4189 M [7] BOLT (M8X1.25X20-MM)  
20. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
21. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
22. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP25990167
 

105-2812: ALTERNATOR GP-CHARGING

105-2812 ALTERNATOR GP-CHARGING
S/N 8TN1-924; 1FR1-1415
12 VOLT, 55 AMP
PART OF 121-5830, 137-3507 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00200492 SEBP2599
1052812 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 1H-3244 [1] LOCKWASHER  
4. 114-2863 [1] PULLEY-ALTERNATOR  
5. 114-2865 [1] FRAME AS-ALTERNATOR  
6. 114-2866 [1] ROTOR AS-ALTERNATOR  
7. 114-2867 [1] FRAME-ALTERNATOR  
8. 114-2868 [1] REGULATOR AS-ALTERNATOR  
9. 114-2869 [1] RECTIFIER AS-ALTERNATOR  
10. 114-2870 [1] HOLDER AS  
11. 114-2871 [1] COVER-ALTERNATOR  
12. 114-2872 [1] BUSHING-ALTERNATOR  
   
    AVAILABLE REPAIR KIT(S):
  114-2873 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES BEARINGS, COVERS, PLATE, SCREW, & WASHER)
  114-2874 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES NUTS & BOLTS)
  114-2875 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP25990168
 

105-2813: ALTERNATOR GP-CHARGING

105-2813 ALTERNATOR GP-CHARGING
S/N 8TN1-924; 1FR1-1415
12 VOLT, 90 AMPERES
PART OF 121-5831, 121-5832 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00200493 SEBP2599
1052813 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-4457 [1] PULLEY-ALTERNATOR  
2. 113-4459 [1] FRAME AS-ALTERNATOR (TOP)  
3. 113-4460 [1] ROTOR AS-ALTERNATOR  
4. 113-4461 [1] FRAME AS-ALTERNATOR (BOTTOM)  
5. 113-4462 [1] REGULATOR AS-ALTERNATOR  
6. 113-4463 [1] RECTIFIER AS-ALTERNATOR  
7. 113-4464 [1] COVER-ALTERNATOR  
8. 113-4469 [4] BUSHING-ALTERNATOR  
9. 113-4470 [1] BUSHING-ALTERNATOR  
10. 5C-2890 M [1] NUT (M6X1-THD)  
11. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 1H-3244 [1] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  113-4465 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES COVERS, BEARINGS, WASHER, PLATE & SCREWS)
  113-4466 [1] KIT-REPAIR (ALTERNATOR BRUSHES)  
    (INCLUDES SEALS & HOLDER ASSEMBLY)
  113-4467 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUTS, PLATE & SCREW)
  113-4468 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP25990169
 

121-5830: ALTERNATOR GP-CHARGING

121-5830 ALTERNATOR GP-CHARGING
S/N 8TN1-924; 1FR1-1415
AN ATTACHMENT
i00200941 SEBP2599
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  105-2812 Y [1] ALTERNATOR GP-CHARGING  
   
  7W-3896 [1] V-BELT SET (INCLUDES 2-BELTS)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Operation and Maintenance Manual
Engine Valve Lash - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
Specifications
Fuel Injection Pump
3054 Engine
Fuel Injection Nozzles
3054 Engine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 Engine
Disassembly and Assembly
Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Service Magazine
Proper Procedure For Servicing And Cleaning The Fuel Injection Pump{1251}
1996/10/21
Correct Service Interval For Water Separator{1251,1280}
1998/03/16
Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17
Fuel Injection Pump Usage With Emissions Certified 3054 Engines In C-Series Backhoe Loaders {1251}
1998/09/07
O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced{1251}
1998/10/26
Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/09
Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08
Cold Start Advance Solenoid Available {1272,1250}
1999/05/17
Cold Start Advance Solenoid Available {1272,1250}
1999/08/02
Remanufactured Stanadyne Fuel Injection Pumps are now available for 3054 and 3056 Engines {1251}
2000/10/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Support for Fuel Injection Pumps {1251}
2008/07/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 436C :

166-0501 KIT-INJECTOR
FITTING GP-FUEL LINES
130-4646 FITTING GP-FUEL LINES
FILTER GP-WATER SEP & FUEL
130-7092 FILTER GP-WATER SEP & FUEL
FILTER GP-FUEL
138-3096 FILTER GP-FUEL
FILTER GP-FUEL
130-1419 FILTER GP-FUEL
FILTER GP-FUEL
130-1419 FILTER GP-FUEL
FILTER & LINES GP-FUEL
160-0148 FILTER & LINES GP-FUEL
CONTROL GP-GOVERNOR
104-2119 CONTROL GP-GOVERNOR
PUMP GP-FUEL INJECTION
130-5393 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7107 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7112 PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
7E-4636 SEPARATOR GP-WATER
TANK GP-FUEL
106-1379 TANK GP-FUEL
TANK GP-FUEL
106-1379 TANK GP-FUEL
ALTERNATOR GP-CHARGING
105-2812 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
105-2813 ALTERNATOR GP-CHARGING

Truck sale:

CATERPILLAR 436C 2000
 
CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States
1999 CAT 436C
Call 
1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico
2000 CAT 436C
USD $23,800 
2000 CAT 436C

Iron2sell.com
1992 CAT 436C
Call 
1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey
1999 CAT 436C
USD $29,000 
1999 CAT 436C

Equipment Pros
Baltimore, Maryland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.