147-0204 TRANSMISSION GP-POWER SHIFT S/N 8TN391-924; 1FR416-1415 PART OF 142-4437 TRANSMISSION AR-POWER SHIFT AN ATTACHMENT 436C

POWER TRAIN

TRANSMISSION GP

0. 147-0204 TRANSMISSI

ELECTRICAL AND STARTING SYSTEM

VALVE GP

1. 121-4036 VALVE GP-S
2. 142-1468 VALVE GP-S
3. 3E-8622 VALVE GP-S

POWER TRAIN

WHEEL GP

4. 371-2247 VALVE GP-T
5. 6D-0337 VALVE GP-T
6. 119-7786 WHEEL & TI
7. 119-7787 WHEEL & TI
8. 119-7788 WHEEL & TI
9. 127-4285 WHEEL & TI
0. INFORMATION

BACKHOE LOADER 436C BACKHOE LOADER 1FR
436C Backhoe Loader Center Pivot, Single Tilt 1FR00001-01415 (MACHINE) POWERED BY 3054 Engine SEBP2599 436C 1FR (1996)

POWER TRAIN

TRANSMISSION GP

111-7815 TRANSMISSION GP-DIRECT DRIVE

147-0200 TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT

#SEBP25990260

147-0204: TRANSMISSION GP-POWER SHIFT

TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT
S/N 8TN391-924; 1FR416-1415
PART OF 142-4437 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT

i00735906 SEBP2599

1470204 TRANSMISSION GP-POWER SHIFT Parts scheme

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
7.	147-0218	[1]	TUBE AS
8.	148-8988 Y	[2]	VALVE GP-SOLENOID (FORWARD HIGH)
9.	8C-8545 M	[2]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
10.	120-9762	[5]	SEAL-O-RING
11.	148-8986 Y	[1]	VALVE GP-SOLENOID (REVERSE)
12.	147-0253	[1]	CASE AS-REAR
	9W-0717	[11]	PLUG
13.	121-7398	[1]	SPACER (70X79.5X2-MM THK)
14.	121-7402 B	[1]	SHIM (0.6-MM THK)
15.	121-7401 B	[1]	SHIM (0.18-MM THK)
16.	121-7400 B	[1]	SHIM (0.08-MM THK)
17.	121-7399 B	[1]	SHIM (0.05-MM THK)
18.	7T-2646	[2]	SPACER (66X79.5X2.02-MM THK)
19.	6T-9166 B	[2]	SHIM (0.051-MM THK)
20.	6T-9165 B	[2]	SHIM (0.076-MM THK)
21.	6T-9164 B	[2]	SHIM (0.178-MM THK)
22.	122-1878	[1]	RING-SEAL
23.	147-0201	[1]	TUBE AS
24.	7W-3556	[12]	WASHER (14.27X20.57X1.5-MM THK)
25.	147-0234	[6]	BOLT (9/16-18X0.83-IN)
26.	1U-8846 B	[1]	SEALANT-GASKET
27.	5P-8066	[2]	SEAL-O-RING
28.	6V-8097 M	[3]	BOLT (M12X1.75X30-MM)
29.	7T-3195	[3]	WASHER (12.3X47X6.35-MM THK)
30.	122-6787	[2]	YOKE AS
			(EACH AS INCLUDES)
		[1]	GUARD
31.	8T-2193	[2]	SEAL-LIP TYPE
32.	121-7385	[1]	PUMP GP-TRANSMISSION
	124-6612	[1]	SEAL-LIP TYPE
33.	9P-9150	[4]	WASHER (8.25X18X0.84-MM THK)
34.	173-0332	[1]	SHAFT AS (COUNTERSHAFT)
	163-9091	[1]	PLUG
35.	7X-4741	[1]	SEAL
36.	9S-4185	[3]	PLUG (3/4-16-THD)
37.	3K-0360	[3]	SEAL-O-RING
38.	123-8906	[5]	CUP-TAPERED ROLLER
39.	123-8905	[5]	CONE-BEARING
40.	121-0694	[2]	WASHER-THRUST (40X70X4-MM THK)
41.	172-5317	[6]	BEARING-SPECIAL
42.	123-8913	[2]	BEARING-ROLLER
43.	147-0224	[1]	GEAR (45/32-TEETH)
44.	8E-5707	[7]	PLATE-END
45.	6V-8757	[6]	RING-RETAINING
46.	6T-9194	[45]	PLATE
47.	6Y-7929	[37]	DISC-FRICTION
48.	9U-8875	[6]	RING-RETAINING
49.	121-2500	[4]	WASHER-THRUST (50X70X4-MM THK)
50.	147-0202	[2]	GEAR (45/24-TEETH)
51.	147-0257	[1]	SHAFT AS-INPUT
	123-2920	[3]	PLUG
52.	9U-8886	[4]	RING-SEAL
53.	123-8910	[1]	CUP-TAPERED ROLLER
54.	123-8909	[1]	CONE-BEARING
55.	7T-6655	[4]	BEARING
56.	147-0259	[2]	SPACER (51.1X54.9X18.7-MM THK)
57.	147-0238	[5]	SPRING AS
58.	6V-5100	[5]	SEAL-O-RING
59.	147-0228	[4]	PISTON-CLUTCH
60.	6T-9196	[7]	SEAL
61.	122-1886	[1]	RING-SEAL
62.	123-8907	[3]	CONE-BEARING
63.	123-8908	[3]	CUP-TAPERED ROLLER
64.	147-0212	[1]	GEAR (42-TEETH)
65.	147-0216	[1]	GEAR (38-TEETH)
66.	147-0203	[3]	WASHER-THRUST (45.3X65X5-MM THK)
67.	147-0258	[1]	SPACER (46X50X16-MM THK)
68.	147-0215	[1]	GEAR (45/19-TEETH)
69.	172-6050	[6]	BEARING-SPECIAL
70.	122-1877	[3]	WASHER-THRUST (40X65X4-MM THK)
71.	6Y-1192	[7]	RING-SEAL
72.	123-8912	[6]	BEARING-ROLLER
73.	9S-4191	[14]	PLUG (9/16-18-THD)
74.	147-0264	[1]	GEAR (45/28-TEETH)
75.	147-0260	[1]	RETAINER-SPRING (16.36MM ID)
76.	095-0928	[1]	RING-RETAINING
77.	147-0205	[2]	WASHER (55X78X5-MM THK)
78.	147-0248	[1]	SPACER (56.2X60X15.8-MM THK)
79.	157-2090	[1]	GEAR (38-TEETH)
80.	172-6743	[2]	BEARING-SPECIAL
81.	147-0242	[1]	GEAR (48-TEETH)
82.	150-3757	[2]	BEARING
83.	009-2062	[2]	SEAL-O-RING
84.	157-2088	[2]	PISTON AS
85.	147-0261	[1]	SHAFT AS-OUTPUT (REAR)
	9W-0717	[2]	PLUG
86.	095-0927	[1]	RING-RETAINING
87.	122-1884	[1]	SPACER (45X49X8-MM THK)
88.	147-0210	[1]	GEAR (45/36-TEETH)
89.	147-0207	[1]	SHAFT AS-OUTPUT (FRONT)
90.	122-1879	[2]	SPACER (58X67.5X2-MM THK)
91.	104-3288 B	[2]	SHIM (0.05-MM THK)
92.	121-2059 B	[2]	SHIM (0.08-MM THK)
93.	121-2060 B	[2]	SHIM (0.18-MM THK)
94.	121-2061 B	[2]	SHIM (0.6-MM THK)
95.	147-0211	[1]	ELBOW AS
	3G-6927	[1]	ADAPTER
96.	6Y-7957	[8]	DISC-FRICTION
97.	147-0227	[1]	PISTON-CLUTCH
98.	6V-8335 M	[16]	BOLT-SELF-LOCKING (M10X1.5X40-MM)
99.	147-0262	[4]	WASHER (19.1X24.1X1.5-MM THK)
100.	147-0266	[2]	BOLT (3/4-16X1.417-IN)
101.	6V-2455	[1]	SENSOR GP-SPEED
	102-8802 J	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365 J	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1386 BE		SLEEVE
102.	1V-6341	[1]	SEAL
103.	3J-1907	[14]	SEAL-O-RING
104.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
105.	6Y-1896	[1]	PLUG AS-DRAIN
	5P-6718	[1]	SEAL-O-RING
106.	147-0232	[4]	PLUG
107.	9X-6615 M	[12]	BOLT (M5X0.8X30-MM)
108.	7T-3253	[2]	DOWEL
109.	7T-3251	[1]	BREATHER
110.	7X-4744	[1]	SEAL-O-RING
111.	147-0255	[1]	HOUSING-SPRING
112.	147-0206	[1]	SPRING
113.	2H-3698	[1]	BALL
114.	147-0256	[1]	SHAFT AS-REVERSE
	9W-0717	[1]	PLUG
	147-0270	[1]	ORIFICE
115.	147-0226	[1]	TUBE AS
116.	147-0236	[1]	TUBE AS
117.	6V-8210 M	[2]	BOLT (M8X1.25X16-MM)
118.	106-9861	[1]	PLATE AS-COVER
119.	121-4036 Y	[2]	VALVE GP-SOLENOID (TORQUE CONVERTER INLET)
120.	6T-9202	[2]	PLUG
121.	121-7396	[1]	VALVE GP-RELIEF (CLUTCH 2 SOLENOID)
	6V-4589	[1]	SEAL-O-RING
	8L-2746	[1]	SEAL-O-RING
122.	147-0209 Y	[1]	VALVE GP-RELIEF (CLUTCH PRESSURE)
123.	9W-5460	[1]	RING
124.	7T-2651	[1]	STRAINER-SUCTION
125.	4F-7952	[1]	SEAL-O-RING
126.	8T-1580	[1]	CUP-BEARING
127.	8T-0271 M	[2]	BOLT-SOCKET HEAD (M10X1.5X35-MM)
128.	150-7732	[2]	SEAL-O-RING
129.	8T-1581	[1]	BEARING-TAPERED ROLLER
130.	6T-9163 B	[2]	SHIM (0.599-MM THK)
131.	119-4740	[1]	FILTER-OIL (STANDARD EFFICIENCY)
132.	147-0245	[1]	CASE AS-FRONT
	9W-0717	[4]	PLUG
	147-0268	[4]	PLUG
133.	161-3249	[1]	RING-RETAINING
134.	8C-5748 M	[4]	BOLT (M8X1.25X55-MM)
135.	178-9566	[2]	SPRING-PISTON
136.	122-1883	[1]	SPACER (38X45X5-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25990261

121-4036: VALVE GP-SOLENOID

VALVE GP-SOLENOID

121-4036 VALVE GP-SOLENOID
S/N 8TN1-924; 1FR1-1415
12-VOLT,TORQUE CONVERTER INLET
PART OF 111-7814 TRANSMISSION GP-DIRECT DRIVE, 147-0200, 147-0204 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00200939 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-9196	[1]	NUT-JAM (1/2-20-THD)
2.	122-1672	[1]	CARTRIDGE AS
3.	130-0013	[1]	COIL AS
4.	1S-9593	[2]	STRAP-CABLE
5.	3E-3362	[1]	WEDGE-PLUG LOCK (2-PIN)
6.	186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
7.	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)

			AVAILABLE REPAIR KIT(S):
	122-1135	[1]	KIT-SEAL
			(INCLUDES RINGS & SEALS)

#SEBP25990262

142-1468: VALVE GP-SOLENOID

VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID
S/N 8TN1-924; 1FR1-1415
12 VOLT DIRECT CURRENT
PART OF 111-7814, 111-7815 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT

i00629557 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)(FORWARD)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	130-0912	[1]	COIL AS (12-VOLT)(REVERSE)
	1S-9593	[2]	STRAP-CABLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
3.	061-8639	[2]	SEAL-O-RING
4.	8L-2779	[4]	SEAL-O-RING
5.	143-4988	[2]	LOCKNUT
6.	143-6227	[1]	PLUG-ORIFICE
7.	143-4655	[2]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP25990263

3E-8622: VALVE GP-SOLENOID

VALVE GP-SOLENOID

3E-8622 VALVE GP-SOLENOID
S/N 1FR1-1415
PART OF 121-4449 MANIFOLD & MTG GP-STEERING

i00200122 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-9196	[1]	NUT-JAM (1/2-20-THD)
2.	107-2066 J	[1]	CARTRIDGE AS
	7T-1342	[1]	KIT-SEAL & RING
			(INCLUDES SEALS, WASHER, NUT & RING)
3.	3E-8621	[1]	COIL AS (12-VOLT)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	1S-9593	[2]	STRAP-CABLE

			AVAILABLE REPAIR KIT(S):
	7T-1342 J	[1]	KIT-SEAL & RING
			(INCLUDES SEALS, WASHER, NUT & RING)
	J		KITS MARKED J AVAILABLE FOR PARTS MARKED J

#SEBP25990264

371-2247: VALVE GP-TIRE

VALVE GP-TIRE

371-2247 VALVE GP-TIRE
S/N 8TN1-924
FIELD REPLACEMENT FOR @@@@@ 6D-0337@@@@@

i04368954 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP25990265

6D-0337: VALVE GP-TIRE

VALVE GP-TIRE

6D-0337 VALVE GP-TIRE
S/N 8TN1-924
PART OF 119-7787, 119-7788, 127-4289, 127-4290 WHEEL & TIRE GP
FIELD REPLACEMENT ORDER @@@@@371-2247@@@@@
AN ATTACHMENT

i00171683 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6D-0443	[1]	HOUSING AS-CORE
2.	2D-2628	[1]	CORE-VALVE
3.	2D-2633	[1]	CAP
4.	8D-2707	[1]	SPUD AS
5.	2D-2629	[1]	GROMMET
6.	2D-2630	[1]	WASHER
7.	2D-2631	[1]	NUT (0.482-26-THD)

#SEBP25990266

119-7786: WHEEL & TIRE GP

WHEEL & TIRE GP

119-7786 WHEEL & TIRE GP -REAR
S/N 8TN1-924
AN ATTACHMENT

i00201104 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
119-7788 Y	[1]	WHEEL & TIRE GP (RH)
119-7787 Y	[1]	WHEEL & TIRE GP (RH)

141-7221	[16]	NUT-HEX FLANGE (3/4-16-THD)
Y		SEPARATE ILLUSTRATION

#SEBP25990267

119-7787: WHEEL & TIRE GP

WHEEL & TIRE GP

119-7787 WHEEL & TIRE GP -RH
S/N 8TN1-924
18X24
PART OF 119-7786 WHEEL & TIRE GP
AN ATTACHMENT

i00201105 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6D-0337 Y	[1]	VALVE GP-TIRE

9R-3659	[1]	TIRE (21-24)
119-7789	[1]	WHEEL AS (REAR)
Y		SEPARATE ILLUSTRATION

#SEBP25990268

119-7788: WHEEL & TIRE GP

WHEEL & TIRE GP

119-7788 WHEEL & TIRE GP -RH
S/N 8TN1-924
18X24
PART OF 119-7786 WHEEL & TIRE GP
AN ATTACHMENT

i00201106 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6D-0337 Y	[1]	VALVE GP-TIRE

9R-3659	[1]	TIRE (21-24)
119-7789	[1]	WHEEL AS (REAR)
Y		SEPARATE ILLUSTRATION

#SEBP25990269

127-4285: WHEEL & TIRE GP

WHEEL & TIRE GP

127-4285 WHEEL & TIRE GP -REAR
S/N 8TN1-924
AN ATTACHMENT

i00200988 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
127-4290 Y	[1]	WHEEL & TIRE GP (RH)
127-4289 Y	[1]	WHEEL & TIRE GP (LH)

141-7221	[16]	NUT-HEX FLANGE (3/4-16-THD)
Y		SEPARATE ILLUSTRATION

Information:

POWER TRAIN

TRANSMISSION GP

Operation and Maintenance Manual

Fifth Gear Lockout Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Magnetic Screen - Clean
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Oil - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Oil Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch

Bearing Part Number Listed Incorrectly For Transmissions
Bearing Part Number Listed Incorrectly For Transmissions

Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures

Transmission Controls (Shift Lever) May Fail
Transmission Controls (Shift Lever) May Fail

Specifications

Torque Converter<BR> 111-7808
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION

Transmission
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION

Introduction
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Transmission
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Systems Operation
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}

Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}

Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Service Letter-APD

Testing and Adjusting

Testing And Adjusting
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Bench Test Procedures

Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}

Disassembly and Assembly

Engine, Torque Converter, Transmission & Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC

Engine & Transmission
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC

Solenoid Valve (Transmission)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Engine, Torque Converter & Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Engine & Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Service Magazine

C-Series Backhoe Loaders Are Being Updated {1000,0685,0720,1001,1013,1350,3030,7950}
1998/01/26

Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08

Use 152-7055 Spring Compressor For Disassembly And Assembly Of Transmission Clutch Shaft Assemblies {3150}
1998/10/05

Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16

Assembling The Transmission Thrust Bearings For Backhoe Loaders {3030}
1999/06/28

Seals for the Relief Valves on the Transmission {5117}
2001/06/04

New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08

A New Shaft Assembly Is Now Used {3030}
2003/10/20

A New Torque Converter Is Now Used {3101}
2004/06/28

An Improved Gear Is Now Used in Transmissions {3030}
2004/07/05

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 436C :

147-0200 TRANSMISSION GP-POWER SHIFT

111-7815 TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE

142-4437 TRANSMISSION AR-POWER SHIFT

142-4436 TRANSMISSION AR-POWER SHIFT

140-6159 TRANSMISSION AR-POWER SHIFT

107-3762 TRANSMISSION AR-DIRECT DRIVE

107-3761 TRANSMISSION AR-DIRECT DRIVE

121-4036 VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID

3E-8622 VALVE GP-SOLENOID

371-2247 VALVE GP-TIRE

6D-0337 VALVE GP-TIRE

119-7786 WHEEL & TIRE GP

119-7787 WHEEL & TIRE GP

119-7788 WHEEL & TIRE GP

Truck sale:

CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States

Call

1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico

USD $23,800

2000 CAT 436C

Iron2sell.com

Call

1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey

USD $29,000

1999 CAT 436C

Equipment Pros
Baltimore, Maryland