107-4346 CYLINDER GP-TILT S/N 8TN1-924; 1FR1-1415 88.9-MM (3.5-IN) BORE X 642.1-MM (25.8-IN) STROKE PART OF 143-1800, 8Y-7466 HYDRAULIC AR Type 2 436C

HYDRAULIC SYSTEM

CYLINDER GP

0. 107-4346 CYLINDER G
1. 6E-0113 CYLINDER G

FUEL SYSTEM

DRAIN GP-FUEL

2. 120-9641 DRAIN GP-E

HYDRAULIC SYSTEM

DRIVE GP

3. 112-1826 DRIVE & MT

FILTER GP

4. 143-0421 FILTER GP-
5. 152-8308 FILTER GP-
6. 6E-5215 FILTER GP-

FITTING GP

7. 132-8769 FITTING GP

HYDRAULIC GP

8. 106-6253 HYDRAULIC
9. 106-6261 HYDRAULIC
0. INFORMATION

BACKHOE LOADER 436C BACKHOE LOADER 1FR
436C Backhoe Loader Center Pivot, Single Tilt 1FR00001-01415 (MACHINE) POWERED BY 3054 Engine SEBP2599 436C 1FR (1996)

HYDRAULIC SYSTEM

CYLINDER GP

107-1855 CYLINDER GP-TILT

107-4346 CYLINDER GP-TILT

6E-0113 CYLINDER GP-TILT

119-3362 KIT-LOAD CONTROL

#SEBP25990350

107-4346: CYLINDER GP-TILT

CYLINDER GP-TILT

107-4346 CYLINDER GP-TILT
S/N 8TN1-924; 1FR1-1415
88.9-MM (3.5-IN) BORE X 642.1-MM (25.8-IN) STROKE
PART OF 143-1800, 8Y-7466 HYDRAULIC AR
Type 2

i00645777 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-0114 C	[1]	CYLINDER AS
2.	7J-9903	[1]	BOSS
3.	9T-0766	[2]	BEARING
4.	9T-6001 M	[1]	BOSS (M10X1.5-THD)
5.	7J-9885 CJ	[1]	RING-WEAR
6.	9T-0769 C	[1]	PISTON
7.	2H-4145 C	[1]	SEAL-O-RING
8.	4J-9224 CJ	[1]	RING-BACKUP
9.	6E-0124 C	[1]	HEAD
10.	9T-0752 C	[1]	ROD AS
11.	9R-0320	[2]	BUSHING
12.	289-2946 C	[1]	SEAL-U-CUP
13.	289-2935 CJ	[1]	SEAL AS-BUFFER
14.	4T-5613 CJ	[1]	RING-WEAR
15.	7J-5639 C	[1]	BOLT-LOCKING (1-14X2.5-IN)
16.	5P-8250 C	[1]	WASHER (28X49X5-MM THK)
17.	4T-8054 J	[1]	SEAL AS
18.	308-1845 CJ	[1]	SEAL-WIPER

			AVAILABLE REPAIR KIT(S):
	228-1778 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25990351

6E-0113: CYLINDER GP-TILT

CYLINDER GP-TILT

6E-0113 CYLINDER GP-TILT
S/N 8TN1-924; 1FR1-1415
89MM (3.5IN) BORE X 642MM (25.2IN) STROKE
PART OF 107-4346 CYLINDER GP-TILT

i00200150 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-0752	[1]	ROD AS
2.	9R-0320	[2]	BUSHING
3.	8C-9133	[1]	SEAL
4.	5J-8200	[1]	SEAL-U-CUP
5.	8C-9124	[1]	SEAL AS
6.	4T-5613	[1]	RING-WEAR
7.	6E-0124	[1]	HEAD
8.	4J-9224	[1]	RING-BACKUP
9.	2H-4145	[1]	SEAL-O-RING
10.	9T-0769	[1]	PISTON
11.	5J-7013	[1]	SEAL AS
12.	7J-9885	[1]	RING-WEAR
13.	5P-8250	[1]	WASHER (28X49X5-MM THK)
14.	7J-5639	[1]	BOLT-LOCKING (1-14X2.5-IN)
15.	6E-0114	[1]	CYLINDER AS
16.	9T-0766	[2]	BEARING
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25990352

120-9641: DRAIN GP-ECOLOGY

DRAIN GP-ECOLOGY

120-9641 DRAIN GP-ECOLOGY
S/N 8TN1-924; 1FR1-1415
AN ATTACHMENT

i00200938 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-9780	[1]	SEAL-O-RING
2.	133-6337	[1]	PLUG-DRAIN
3.	134-8474	[1]	TUBE AS-DRAIN

#SEBP25990353

112-1826: DRIVE & MTG GP-PUMP

DRIVE & MTG GP-PUMP

112-1826 DRIVE & MTG GP-PUMP
S/N 8TN1-924; 1FR1-1415
PART OF 143-1800, 8Y-7466 HYDRAULIC AR

i00200867 SEBP2599

1121826 DRIVE & MTG GP-PUMP Parts scheme

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
2.	9U-8886	[1]	RING-SEAL
3.	115-1918	[1]	PLATE
4.	117-3534	[1]	ADAPTER
5.	274-4555	[1]	HUB
6.	128-5596 Y	[1]	SHAFT GP-PUMP DRIVE
7.	175-7904	[1]	SEAL-O-RING
8.	8T-4122	[2]	WASHER-HARD (17X32X3.5-MM THK)
9.	8T-7338 M	[2]	BOLT (M16X2X45-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25990354

143-0421: FILTER GP-OIL

FILTER GP-OIL

143-0421 FILTER GP-OIL -HYDRAULIC
S/N 8TN1-366; 1FR1-222
PART OF 8Y-7466 HYDRAULIC AR

i00667719 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	108-1153	[1]	FILTER-OIL (ADVANCED EFFICIENCY)
			(FOR FIRE RESISTANT APPLICATIONS ONLY)

#SEBP25990355

152-8308: FILTER GP-OIL

FILTER GP-OIL

152-8308 FILTER GP-OIL
S/N 8TN1-924; 1FR1-1415
PART OF 143-1800, 8Y-7466 HYDRAULIC AR
OPTIONAL FIELD REPLACEMENT ORDER 1-134-3014 FILTER AS-OIL

i00671460 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	126-1817	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)

#SEBP25990356

6E-5215: FILTER GP-OIL

FILTER GP-OIL

6E-5215 FILTER GP-OIL
S/N 8TN1-924; 1FR1-1415
PART OF 8Y-7466 HYDRAULIC AR

i00111062 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	108-1153	[1]	FILTER-OIL (ADVANCED EFFICIENCY)
			-OR-
	134-3014	[1]	FILTER-OIL (FIRE RESISTANT)

#SEBP25990357

132-8769: FITTING GP-HYDRAULIC

FITTING GP-HYDRAULIC

132-8769 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N 8TN1-924; 1FR1-1415
AN ATTACHMENT

i00201053 SEBP2599

1328769 FITTING GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	106-0406	[1]	FITTING (QUICK DISCONNECT, MALE)
2.	106-0401	[1]	FITTING (QUICK DISCONNECT, FEMALE)

#SEBP25990358

106-6253: HYDRAULIC AR

HYDRAULIC AR

106-6253 HYDRAULIC AR
S/N 8TN1-924; 1FR1-1415
AN ATTACHMENT

i00990905 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6V-9830	[2]	CAP
106-6373 Y	[1]	CONTROL GP-HYDRAULIC PEDAL
119-4003 Y	[1]	CONVERSION GP-CONTROL VALVE
CY	[1]	LINES GP-HYDRAULIC
		-OR-
121-8337 Y	[1]	LINES GP-HYDRAULIC
6V-8398	[2]	SEAL-O-RING
C		CHANGE FROM PREVIOUS TYPE
Y		SEPARATE ILLUSTRATION

#SEBP25990359

106-6261: HYDRAULIC AR

HYDRAULIC AR

106-6261 HYDRAULIC AR
S/N 8TN1-924; 1FR1-1415
2 TO 3 VALVE
AN ATTACHMENT

i00200837 SEBP2599

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
104-1966 Y	[1]	CONTROL GP-HYDRAULIC HAND
112-1843 Y	[1]	CONVERSION GP-CONTROL VALVE
106-5876 Y	[1]	LINES GP-LOADER AUXILIARY
117-5671	[1]	BOOT
Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders

Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications

Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly
Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly

Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines

THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS

Service Letter-APD

Bench Test Procedures

Disassembly and Assembly

Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Extendible Stick Cylinder & Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Service Magazine

New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11

Correction To Backhoe Loader C-Series Parts Manuals{7222,7567}
1997/07/28

Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25

New Stabilizer Pads Are Wider{7222}
1998/03/09

Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08

Lubrication Of The Stabilizer Pad Pin On Backhoe Loaders {7528,7222,7581}
1999/01/25

Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28

Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20

New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04

New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05

The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16

Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07

Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14

New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30

Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02

Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01

Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

New Stabilizer Pads Make Stabilizer Operation Quieter {5468, 7150, 7222}
2001/10/08

Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05

Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08

Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

New Swing Cylinders Improve Service Life {5105}
2005/03/21

Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Caterpillar Parts SIS Catalog 436C :

107-4346 CYLINDER GP-TILT

107-1855 CYLINDER GP-TILT

116-6861 CYLINDER GP-SWING

6E-1935 CYLINDER GP-STICK

131-1847 CYLINDER GP-STABILIZER

131-1846 CYLINDER GP-STABILIZER

9T-4006 CYLINDER GP-MULTIPURPOSE BUKT

185-1839 CYLINDER GP-MULTIPURPOSE BUKT

6E-0113 CYLINDER GP-TILT

120-9641 DRAIN GP-ECOLOGY

112-1826 DRIVE & MTG GP-PUMP

143-0421 FILTER GP-OIL

152-8308 FILTER GP-OIL

6E-5215 FILTER GP-OIL

132-8769 FITTING GP-HYDRAULIC

106-6253 HYDRAULIC AR

Truck sale:

CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States

Call

1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico

USD $23,800

2000 CAT 436C

Iron2sell.com

Call

1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey

USD $29,000

1999 CAT 436C

Equipment Pros
Baltimore, Maryland