107-3716 AXLE & MTG GP-REAR S/N 2AR604-1603 PART OF 143-1783 DRIVE AR-BACKHOE LOADER AN ATTACHMENT 436C

107-3716: AXLE & MTG GP-REAR

107-3716 AXLE & MTG GP-REAR
S/N 2AR604-1603
PART OF 143-1783 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT
2.	156-2853 Y	[1]	AXLE GP-REAR
3.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
4.	8T-4131 M	[8]	NUT (M20X2.5-THD)
5.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

110-8631: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

110-8631 AXLE GP-DRIVE & STEERING -FRONT
S/N 1PR1-1598; 2AR1-1603
PART OF 112-9630 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-6108	[1]	GEAR SET-BEVEL
2.	130-3809	[1]	TIE ROD AS (RH)
3.	130-3012	[1]	TIE ROD AS (LH)
			(EACH TIE ROD AS INCLUDES)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-7043	[1]	JOINT
4.	130-3011 Y	[1]	CYLINDER GP-STEERING
5.	130-3850 B	[1]	SHIM (0.8-MM THK)
	054-6459 B	[1]	SHIM (1-MM THK)
	054-6460 B	[1]	SHIM (1.05-MM THK)
	054-6461 B	[1]	SHIM (1.1-MM THK)
	054-6462 B	[1]	SHIM (1.15-MM THK)
	054-6463 B	[1]	SHIM (1.2-MM THK)
	054-6464 B	[1]	SHIM (1.25-MM THK)
	054-6465 B	[1]	SHIM (1.3-MM THK)
	054-6466 B	[1]	SHIM (1.35-MM THK)
	054-6467 B	[1]	SHIM (1.4-MM THK)
	054-6468 B	[1]	SHIM (1.45-MM THK)
	054-6469 B	[1]	SHIM (1.5-MM THK)
	054-6470 B	[1]	SHIM (1.55-MM THK)
	054-6471 B	[1]	SHIM (1.6-MM THK)
	054-6472 B	[1]	SHIM (0.95-MM THK)
	054-6473 B	[1]	SHIM (0.9-MM THK)
	054-6474 B	[1]	SHIM (0.65-MM THK)
	054-6475 B	[1]	SHIM (0.7-MM THK)
	054-6476 B	[1]	SHIM (0.75-MM THK)
	054-6477 B	[1]	SHIM (0.85-MM THK)
6.	3N-4969	[1]	CONE-BEARING (TAPERED ROLLER)
7.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
8.	130-6689 B	[1]	RING (15.1-MM THK)
	130-6690 B	[1]	RING (15.2-MM THK)
	130-6691 B	[1]	RING (15.26-MM THK)
	130-6693 B	[1]	RING (15.3-MM THK)
	130-6694 B	[1]	RING (15.33-MM THK)
	130-6695 B	[1]	RING (15.36-MM THK)
	130-6696 B	[1]	RING (15.38-MM THK)
	130-6697 B	[1]	RING (15.4-MM THK)
	130-6698 B	[1]	RING (15.43-MM THK)
	130-6699 B	[1]	RING (15.46-MM THK)
	130-6701 B	[1]	RING (15.48-MM THK)
	130-6702 B	[1]	RING (15.5-MM THK)
	130-6703 B	[1]	RING (15.53-MM THK)
	130-6704 B	[1]	RING (15.56-MM THK)
	130-6705 B	[1]	RING (15.58-MM THK)
	130-6706 B	[1]	RING (15.6-MM THK)
	130-6707 B	[1]	RING (15.63-MM THK)
	130-6708 B	[1]	RING (15.66-MM THK)
	130-6709 B	[1]	RING (15.68-MM THK)
	130-6710 B	[1]	RING (15.7-MM THK)
	130-6711 B	[1]	RING (15.73-MM THK)
	130-6712 B	[1]	RING (15.8-MM THK)
	130-6713 B	[1]	RING (15.83-MM THK)
	130-6714 B	[1]	RING (15.86-MM THK)
	130-6715 B	[1]	RING (15.9-MM THK)
	130-6716 B	[1]	RING (15.93-MM THK)
	130-6718 B	[1]	RING (15.96-MM THK)
	130-6719 B	[1]	RING (16-MM THK)
	130-6720 B	[1]	RING (16.03-MM THK)
	130-6721 B	[1]	RING (16.06-MM THK)
	130-6722 B	[1]	RING (16.1-MM THK)
	130-6724 B	[1]	RING (16.13-MM THK)
	130-6725 B	[1]	RING (16.16-MM THK)
	130-6726 B	[1]	RING (16.2-MM THK)
	130-6727 B	[1]	RING (16.23-MM)
	130-6728 B	[1]	RING (16.26-MM THK)
	130-6729 B	[1]	RING (16.3-MM THK)
	130-6731 B	[1]	RING (16.4-MM THK)
	130-6732 B	[1]	RING (16.76-MM THK)
9.	9R-3168 M	[4]	SCREW (M10X1.5X20-MM)
10.	119-7061	[2]	PLUG
11.	130-6878	[6]	RING
12.	169-4162	[6]	CONE-BEARING
13.	169-4161	[6]	CONE-BEARING
14.	169-4160	[6]	GEAR
15.	130-7027	[2]	CARRIER
16.	119-7042	[2]	SHAFT
17.	119-7040	[2]	GEAR-RING
18.	130-3007	[2]	NUT
19.	119-7060 M	[2]	SCREW-STOP (M14X1.5X50-MM)
20.	130-7047	[16]	STUD
21.	130-3008 M	[16]	BOLT (M10X1.5X45-MM)
22.	2S-0480	[4]	CUP-TAPERED ROLLER
23.	6V-0832	[4]	CONE
24.	130-6879	[2]	SEAL
25.	9X-0640	[2]	SEAL-O-RING
26.	130-3014 Y	[1]	SHAFT GP-DRIVE (LH)
27.	130-3013 Y	[1]	SHAFT GP-DRIVE (RH)
28.	054-6589	[2]	CLIP
29.	119-7045	[2]	SEAL
30.	7X-5771	[2]	RING-RETAINING
31.	131-3816	[2]	RING
32.	119-7053	[2]	FLANGE
33.	5P-9439	[2]	BALL BEARING
34.	130-6677	[16]	BOLT (M12X1.75X30-MM)
35.	130-7026	[2]	PIN
36.	119-7038	[2]	PIN
37.	130-7008 B	[2]	SHIM (0.2-MM THK)
	130-7009 B	[2]	SHIM (0.3-MM THK)
	130-7010 B	[2]	SHIM (0.4-MM THK)
	130-7011 B	[2]	SHIM (0.6-MM THK)
	130-7012 B	[2]	SHIM (0.8-MM THK)
	130-7013 B	[2]	SHIM (1-MM THK)
	130-7015 B	[2]	SHIM (1.6-MM THK)
	130-7017 B	[2]	SHIM (2-MM THK)
38.	119-7047	[2]	SEAL
39.	119-7046	[2]	SEAL
40.	031-0426	[2]	CUP-BEARING
41.	077-3918	[2]	BEARING
42.	119-7057	[1]	HOUSING (RH)
43.	130-7031	[1]	HOUSING (LH)
44.	9R-5246	[2]	BUSHING
45.	130-6877	[2]	SEAL
46.	130-2998	[2]	BUSHING
47.	9X-0796	[1]	SEAL-O-RING
48.	130-6673	[1]	PLUG
49.	9R-3175	[1]	PLUG
50.	054-6526	[15]	DISC
51.	6V-3303 M	[15]	BOLT (M16X2X60-MM)
52.	054-6847	[1]	SEAL-O-RING
53.	6V-2200	[2]	CUP-BEARING
54.	003-7501	[2]	CONE-BEARING
55.	130-6798 B	[2]	SHIM (1-MM THK)
	130-6799 B	[2]	WASHER (1.05-MM THK)
	130-6800 B	[2]	SHIM (1.1-MM THK)
	130-6801 B	[2]	WASHER (62.2X75X1.15-MM THK)
	130-6802 B	[2]	WASHER (62.2X75X1.2-MM THK)
	130-6803 B	[2]	WASHER (62.2X75X1.25-MM THK)
	130-6804 B	[2]	SHIM (1.3-MM THK)
	130-6805 B	[2]	SHIM (1.35-MM THK)
	130-6806 B	[2]	SHIM (1.4-MM THK)
	130-6807 B	[2]	WASHER (1.45-MM THK)
	130-6808 B	[2]	SHIM (1.5-MM THK)
	130-6809 B	[2]	SHIM (1.55-MM THK)
	130-6810 B	[2]	SHIM (1.6-MM THK)
	130-6811 B	[2]	SHIM (1.65-MM THK)
	130-6812 B	[2]	SHIM (1.7-MM THK)
	130-6813 B	[2]	SHIM (1.75-MM THK)
	130-6814 B	[2]	SHIM (1.8-MM THK)
	130-6815 B	[2]	SHIM (1.85-MM THK)
	130-6816 B	[2]	SHIM (1.9-MM THK)
	130-6817 B	[2]	WASHER (62.2X75X1.95-MM THK)
	130-6818 B	[2]	WASHER (62.2X75X2-MM THK)
	130-6819 B	[2]	WASHER (62.2X75X2.05-MM THK)
	130-6820 B	[2]	SHIM (2.1-MM THK)
56.	119-7056	[1]	HOUSING (LH)
57.	119-7055	[1]	HOUSING (RH)
58.	130-6675	[1]	PIN
59.	082-3077	[4]	PIN
60.	130-3010	[4]	PIN
61.	105-3484 M	[12]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
62.	119-7036	[1]	PIN
63.	9R-6994	[2]	WASHER-THRUST
64.	128-7855	[2]	GEAR-PINION
65.	119-7035	[2]	GEAR
66.	008-1902	[3]	CONE-BEARING
67.	6S-3051	[3]	CUP-BEARING
68.	055-1986	[1]	SEAL-LIP TYPE
69.	130-7046	[1]	FLANGE
70.	130-7028	[1]	PLATE
71.	054-6480	[1]	DISC
72.	130-3005 M	[1]	NUT (M24X2-THD)
73.	130-7024	[1]	CASE
74.	130-7048 B	[2]	RING (13.5-MM THK)
	130-7049 B	[2]	RING (13.6-MM THK)
	130-7050 B	[2]	RING (13.7-MM THK)
75.	130-3000 M	[2]	WASHER (53.2X71.9X1.9-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

111-1523: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

111-1523 AXLE GP-DRIVE & STEERING -REAR
S/N 1PR1-1598
RATIO 18.62. ALL WHEEL STEER
PART OF 112-2113 AXLE & MTG GP-DRIVE & STEERING
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	110-2462	[10]	SPRING
2.	8U-3591	[10]	SPACER (6.5X15X7-MM THK)
3.	7X-2619 M	[10]	BOLT (M6X1X10-MM)
4.	110-0878	[10]	PIN
5.	110-4748	[16]	NUT
6.	009-3819	[1]	CONE-BEARING
7.	110-0880	[2]	CARRIER-DISC
8.	110-4752 B	[4]	SHIM
9.	110-0876	[6]	SCREW
10.	1G-6735	[8]	PIN-GROOVED
11.	110-0877	[6]	PIN
12.	110-4736	[6]	RING
13.	110-0870	[10]	PLATE
14.	110-0842	[8]	DISC-FRICTION
15.	110-4757	[2]	RING
16.	110-4755	[2]	RING
17.	110-4756	[2]	RING
18.	110-4758	[2]	RING
19.	2D-9191	[1]	CONE-BEARING
20.	110-0158 B	[1]	RING (16-MM THK)
	110-0137 B	[1]	RING (17.4-MM THK)
	110-0138 B	[1]	RING (17.3-MM THK)
	110-0139 B	[1]	RING (17.2-MM THK)
	110-0140 B	[1]	RING (17.1-MM THK)
	110-0146 B	[1]	RING (16.92-MM THK)
	110-0150 B	[1]	RING (16.8-MM THK)
	110-0151 B	[1]	RING (16.7-MM THK)
	110-0152 B	[1]	RING (16.6-MM THK)
	110-0153 B	[1]	RING (16.5-MM THK)
	110-0154 B	[1]	RING (16.4-MM THK)
	110-0155 B	[1]	RING (16.3-MM THK)
	110-0156 B	[1]	RING (16.2-MM THK)
	110-0157 B	[1]	RING (16.1-MM THK)
	110-0142 B	[1]	RING (17.04-MM THK)
	110-0144 B	[1]	RING (16.98-MM THK)
	110-0148 B	[1]	RING (16.86-MM THK)
	193-1454 B	[1]	RING (16.66-MM THK)
	193-1455 B	[1]	RING (16.96-MM THK)
	193-1458 B	[1]	RING (17-MM THK)
	193-1460 B	[1]	RING (17.02-MM THK)
	193-1461 B	[1]	RING (17.06-MM THK)
	193-1462 B	[1]	RING (17.08-MM THK)
	193-1463 B	[1]	RING (17.12-MM THK)
	193-1464 B	[1]	RING (17.14-MM THK)
	193-1465 B	[1]	RING (17.16-MM THK)
	193-1466 B	[1]	RING (17.18-MM THK)
	193-1467 B	[1]	RING (17.22-MM THK)
	193-1469 B	[1]	RING (17.24-MM THK)
	193-1470 B	[1]	RING (17.26-MM THK)
	193-1471 B	[1]	RING (17.28-MM THK)
21.	110-0159 B	[2]	WASHER-THRUST (3-MM THK)
	110-0160 B	[2]	WASHER-THRUST (2.7-MM THK)
	110-0161 B	[2]	WASHER-THRUST (2.5-MM THK)
	110-0162 B	[2]	WASHER-THRUST (2.2-MM THK)
	110-0163 B	[2]	WASHER-THRUST (2-MM THK)
	110-0164 B	[2]	WASHER-THRUST (1.7-MM THK)
	110-0165 B	[2]	WASHER-THRUST (1.5-MM THK)
22.	5W-5547 B	[1]	DISC (1-MM THK)
	5W-5548 B	[1]	DISC (1.1-MM THK)
	5W-5549 B	[1]	DISC (1.2-MM THK)
	5W-5550 B	[1]	DISC (1.3-MM THK)
	5W-5551 B	[1]	DISC (1.4-MM THK)
	5W-5552 B	[1]	DISC (1.5-MM THK)
	5W-5553 B	[1]	DISC (1.6-MM THK)
	5W-5554 B	[1]	DISC (1.7-MM THK)
	5W-5555 B	[1]	DISC (1.05-MM THK)
	5W-5556 B	[1]	DISC (1.15-MM THK)
	5W-5557 B	[1]	DISC (1.25-M THK)
	5W-5558 B	[1]	DISC (1.35-MM THK)
	5W-5559 B	[1]	DISC (1.45-MM THK)
	5W-5560 B	[1]	DISC (1.55-MM THK)
	5W-5561 B	[1]	DISC (1.65-MM THK)
	5W-5562 B	[1]	DISC (1.75-MM THK)
	5W-6400 B	[1]	DISC (1.8-MM THK)
	8U-2752 B	[1]	DISC (0.7-MM THK)
	8U-2753 B	[1]	DISC (0.8-MM THK)
	8U-2754 B	[1]	DISC (0.9-MM THK)
23.	110-2461 M	[8]	BOLT (M16X1.5X100-MM)
24.	110-2457	[4]	PIN-SPRING
25.	110-2458	[4]	PIN-SPRING
26.	110-2467	[1]	SHAFT-DIFFERENTIAL
27.	213-9783	[6]	BEARING-ROLLER
28.	110-0845	[4]	WASHER-THRUST
29.	110-0855	[2]	GEAR-AXLE BEVEL
30.	110-0852	[2]	DISC-PRESSURE
31.	110-0854	[8]	DISC-FRICTION
32.	110-0853	[10]	PLATE
33.	253-9741	[1]	CASE-DIFFERENTIAL
34.	190-8591	[12]	WASHER (64.5X72.1X2-MM THK)
35.	213-9759	[4]	GEAR-BEVEL
36.	193-1132	[6]	GEAR-PLANETARY
37.	190-8590	[12]	RING-SNAP
38.	110-0867	[1]	HOUSING-AXLE DRIVE
39.	110-0883	[2]	HOUSING-BRAKE
40.	190-8567 B	[1]	SHIM (1-MM THK)
	190-8561 B	[1]	SHIM (0.6-MM THK)
	110-0124	[1]	SHIM (2-MM THK)
	110-0122	[1]	SHIM (1.8-MM THK)
	110-0121	[1]	SHIM (1.5-MM THK)
	110-0120	[1]	SHIM (1.2-MM THK)
	190-8566 B	[1]	SHIM (0.9-MM THK)
	190-8565 B	[1]	SHIM (0.8-MM THK)
	190-8563 B	[1]	SHIM (0.7-MM THK)
	5W-2073 B	[1]	SHIM (0.3-MM THK)
	5W-2074 B	[1]	SHIM (0.5-MM THK)
	5W-3644 B	[1]	SHIM (0.2-MM THK)
	5W-2072 B	[1]	SHIM (0.1-MM THK)
	193-1123 B	[1]	SHIM (0.75-MM THK)
	193-1124 B	[1]	SHIM (0.65-MM THK)
	193-1125 B	[1]	SHIM (0.1-MM THK)
	193-1127 B	[1]	SHIM (0.15-MM THK)
	193-1128 B	[1]	WASHER (0.1-MM THK)
	193-1129 B	[1]	WASHER (0.15-MM THK)
	193-1130 B	[1]	WASHER (0.5-MM THK)
41.	3N-4969	[1]	CONE-BEARING (TAPERED ROLLER)
42.	110-4746	[1]	SEAL
43.	110-0856	[1]	CAP-PROTECTION
44.	113-5988	[1]	FLANGE
45.	110-4791	[1]	HOUSING-AXLE
46.	110-4749	[2]	PLUG
47.	110-2463	[1]	BEARING-ROLLER
48.	110-0180 B	[2]	WASHER (90X99.8X0.3-MM THK)
	6T-8671 B	[2]	SHIM (0.8-MM THK)
	6T-8672 B	[2]	SHIM (0.7-MM THK)
	6T-8673 B	[2]	SHIM (0.6-MM THK)
	6T-8674 B	[2]	SHIM (0.5-MM THK)
	6T-8675 B	[2]	SHIM (0.4-MM THK)
	110-0167 B	[2]	WASHER (90X99.8X0.85-MM THK)
	110-0168 B	[2]	WASHER (90X99.8X0.75-MM THK)
	110-0169 B	[2]	WASHER (90X99.8X0.65-MM THK)
	110-0170 B	[2]	WASHER (0.55-MM THK)
	110-0177 B	[2]	WASHER (90X99.8X0.45-MM THK)
	110-0178 B	[2]	WASHER (90X99.8X0.35-MM THK)
	110-0181 B	[2]	RING (2-MM THK)
	110-0182 B	[2]	RING (1.95-MM THK)
	110-0183 B	[2]	RING (1.9-MM THK)
	110-0184 B	[2]	RING (1.85-MM THK)
	098-2961 B	[2]	SHIM (1.7-MM THK)
	098-2962 B	[2]	SHIM (1.8-MM THK)
	098-2959 B	[2]	SHIM (1.5-MM THK)
	098-2960 B	[2]	SHIM (1.6-MM THK)
	098-2957 B	[2]	SHIM (1.3-MM THK)
	098-2958 B	[2]	SHIM (1.4-MM THK)
	6T-8668 B	[2]	SHIM (1.2-MM THK)
	6T-8669 B	[2]	SHIM (1.1-MM THK)
	6T-8670 B	[2]	SHIM (1-MM THK)
	110-0191 B	[2]	RING (1.25-MM THK)
	110-0192 B	[2]	RING (1.15-MM THK)
	110-0193 B	[2]	RING (1.05-MM THK)
	110-0194 B	[2]	RING (0.95-MM THK)
	110-0195 B	[2]	RING (0.9-MM THK)
49.	110-0875	[2]	PISTON
50.	110-4753	[2]	BEARING
51.	008-1902	[2]	CONE-BEARING
52.	110-4790	[1]	HOUSING-AXLE
53.	110-4792	[1]	HOUSING-BRAKE
	110-4793	[1]	HOUSING-BRAKE
54.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
55.	110-0134 B	[1]	SHIM (0.4-MM THK)
	110-0131 B	[1]	SHIM (1-MM THK)
	110-0132 B	[1]	SHIM (0.8-MM THK)
	110-0133 B	[1]	SHIM (0.6-MM THK)
	B	[1]	SHIM (0.3-MM THK)
	110-0136 B	[1]	SHIM (0.2-MM THK)
	110-0126 B	[1]	SHIM (2-MM THK)
	110-0127 B	[1]	SHIM (1.8-MM THK)
	110-0128 B	[1]	SHIM (1.6-MM THK)
56.	110-0859	[2]	PIN-BEARING
57.	096-9988 M	[8]	BOLT (M14X2X30-MM)
58.	9R-6947	[2]	SEAL-O-RING
59.	9R-6952	[2]	CAP-SEALING
60.	110-0884	[2]	HUB
61.	110-0874	[20]	BOLT-WHEEL
62.	110-4745	[2]	SEAL-O-RING
63.	8U-2356	[4]	BEARING
64.	110-0866	[2]	CARRIER-PLANETARY
65.	110-0862	[2]	GEAR-RING
66.	098-2996	[4]	SEAL-O-RING
67.	6S-3051	[2]	CUP-BEARING
68.	110-4737	[6]	RING-RETAINING
69.	4D-8648	[2]	CUP-BEARING
70.	110-0865	[2]	SHAFT-SUN GEAR
71.	009-3818	[1]	CUP-BEARING
72.	110-0846	[2]	RING-RETAINING
73.	2D-9190	[1]	CUP-BEARING
74.	110-0863	[2]	WASHER-THRUST
75.	110-0844	[2]	WASHER-THRUST
76.	110-0849	[2]	NUT-SLOTTED
77.	110-0861	[2]	WASHER-TAB
78.	9R-6965 M	[4]	SCREW (M10X1.5X20-MM)
79.	110-0851	[2]	SEAL
80.	110-0850	[4]	SEAL
81.	110-0839	[2]	BUSHING
82.	110-0864	[2]	RING-RETAINING
83.	110-2460 M	[4]	BOLT (M12X1.5X95-MM)
84.	8T-6385 M	[32]	BOLT (M16X2X180-MM)
85.	110-2455 M	[4]	BOLT (M12X1.5X20-MM)
86.	110-4733	[2]	UNIVERSAL JOINT
87.	8T-4779 M	[8]	BOLT (M16X2X35-MM)
88.	110-0860	[2]	PIN-BEARING
89.	130-2701	[1]	GEAR SET-REAR AXLE
90.	110-0843	[1]	WASHER (31X56X6-MM THK)
91.	110-0848 M	[1]	NUT (M30X1.5-THD)
92.	110-2456	[4]	PIN-SPRING
93.	110-0840	[2]	TIE ROD
94.	110-0871	[1]	GUIDE
95.	110-0847	[1]	PLUG-SCREW
96.	9R-6953	[6]	SEAL-O-RING
97.	109-4440	[5]	PLUG
98.	110-0841	[1]	ROD-PISTON
99.	110-4754	[1]	GASKET
100.	110-4759	[2]	GUIDE-PISTON
101.	110-0873	[1]	CYLINDER
102.	110-4742	[2]	SEAL-O-RING
103.	110-4739	[12]	RING-SNAP
104.	110-4735	[4]	RING-GUIDE
105.	5W-6392	[2]	SEAL-O-RING
106.	5W-6391	[2]	SCRAPER
107.	110-0872	[1]	GUIDE
108.	110-2459 M	[8]	BOLT (M14X2X105-MM)
109.	6V-2652	[2]	CONE-BEARING
110.	110-0858	[2]	CAP-SEALING
111.	110-4743	[2]	SEAL-O-RING
112.	9R-3171	[4]	FITTING
	225-5014 B	[1]	RING (16.56-MM THK)
	225-5015 B	[1]	RING (16.62-MM THK)
	225-5016 B	[1]	RING (16.64-MM THK)
	225-5017 B	[1]	RING (16.68-MM THK)
	225-5018 B	[1]	RING (16.72-MM THK)
	225-5019 B	[1]	RING (16.74-MM THK)
	225-5020 B	[1]	RING (16.76-MM THK)
	225-5021 B	[1]	RING (16.76-MM THK)
	225-5022 B	[1]	RING (16.78-MM THK)
	225-5023 B	[1]	RING (16.82-MM THK)
	225-5024 B	[1]	RING (16.84-MM THK)
	225-5025 B	[1]	RING (16.88-MM THK)
	225-5026 B	[1]	RING (16.9-MM THK)
	225-5027 B	[1]	RING (16.94-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

107-3718: AXLE GP-REAR

AXLE GP-REAR

107-3718 AXLE GP-REAR -REAR
S/N 2AR1-611
RATIO 18.5
PART OF 107-3716 AXLE & MTG GP-REAR
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-5837	[2]	SHAFT AS
			(EACH INCLUDES)
2.	9R-5219	[8]	BOLT-SPECIAL
3.	9F-2167	[2]	SCREW-PURGE (3/8-24X1.164-IN)
4.	118-5839	[2]	SEAL-REAR AXLE
5.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
6.	115-2137	[1]	HOUSING AS (LH)
	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
	9R-2412	[2]	STUD
	8S-9151	[1]	CUP-BEARING
	9R-2414	[1]	GEAR (56-TEETH)
7.	115-2138	[1]	HOUSING AS
8.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
9.	9R-2412	[2]	STUD
10.	8S-9151	[1]	CUP-BEARING
11.	9R-2414	[1]	GEAR (56-TEETH)
12.	9R-9406	[1]	HOUSING-REAR BRAKE
13.	9X-8880	[25]	BOLT (5/8-11X2-IN)
14.	9X-8883	[1]	BOLT (5/8-11X2.75-IN)
15.	153-3194	[2]	CARRIER AS
			(EACH INCLUDES)
16.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
17.	9R-2421	[3]	SHAFT
18.	9R-2419	[3]	KIT-BEARING
19.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
20.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
21.	153-3192	[3]	GEAR-PLANETARY
22.	9R-2420	[1]	RETAINER
23.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
24.	9R-2505	[1]	SEAL
25.	9R-2504	[1]	SHAFT
26.	9R-2506	[1]	FORK
27.	9R-0883	[1]	PIN
28.	9R-0823	[1]	LEVER AS
29.	9R-2507 M	[1]	SCREW-SPECIAL
30.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
31.	9R-2495	[2]	SEAL
32.	3J-9196	[4]	NUT-JAM (1/2-20-THD)
33.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
34.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)
35.	9R-2426	[2]	LOCK
36.	9R-2424	[2]	GEAR (16-TEETH)
37.	9R-9405	[1]	HOUSING-REAR BRAKE (RH)
38.	133-7234	[8]	DISC-FRICTION
39.	9R-9401	[8]	PLATE
40.	9R-2474	[2]	PIN
41.	055-1258	[1]	HOUSING-BRAKE (RH)
42.	055-1259	[1]	HOUSING-BRAKE
43.	9R-2427 B	[1]	SHIM (0.965-MM THK)
	9R-2428 B	[1]	SHIM (1.118-MM THK)
	9R-2429 B	[1]	SHIM (1.27-MM THK)
	9R-2430 B	[1]	SHIM (1.422-MM THK)
	9R-2431 B	[1]	SHIM (1.575-MM THK)
	9R-2432 B	[1]	SHIM (1.727-MM THK)
	9R-2433 B	[1]	SHIM (1.88-MM THK)
	9R-2434 B	[1]	SHIM (2.032-MM THK)
44.	2B-2006	[12]	BOLT (1/2-13X4.75-IN)
45.	9R-9398	[2]	MANIFOLD-BRAKE TUBE
46.	8H-1607	[2]	SEAL-O-RING
47.	5L-9018	[4]	BOLT-SOCKET HEAD (1/4-20X1.75-IN)
48.	8M-8157	[4]	SEAL-O-RING
49.	8T-6760	[2]	PLUG-PIPE (1-1/2-11-1/2 NPT)
50.	9R-9410	[2]	SEAL-REAR BRAKE
51.	9R-9408	[2]	PISTON-REAR BRAKE
52.	9R-9409	[2]	SEAL-REAR BRAKE
53.	9R-2493	[1]	RING
54.	9R-2492	[1]	WASHER (64.389X78.74X3.124-MM THK)
55.	9R-2482	[1]	COUPLING
56.	9R-2486	[1]	SPRING
57.	9R-2483	[1]	ADAPTER
58.	2S-0480	[1]	CUP-TAPERED ROLLER
59.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
60.	9R-2485	[8]	BOLT (1/2-13X2.87-IN)
61.	9R-2480	[1]	CASE AS
	9R-2485	[1]	BOLT (1/2-13X2.87-IN)
62.	9R-2484	[2]	BUSHING-TERMINAL
63.	9R-2490	[2]	WASHER (76.2X101.6X1.524-MM THK)
64.	9R-2488	[1]	GEAR (16-TEETH)
65.	9R-2491	[1]	SPIDER
66.	9R-9403	[4]	PINION
67.	9R-2489	[4]	WASHER-SPRING
68.	9R-2487	[1]	GEAR (16-TEETH)
69.	9R-5241	[1]	GEAR SET
70.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)
71.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
72.	9R-2446 B	[1]	SPACER (45.86X50.98X31.858-MM THK)
	9R-2447 B	[1]	SPACER (45.86X50.98X31.908-MM THK)
	9R-2448 B	[1]	SPACER (45.86X50.98X31.959-MM THK)
	9R-2449 B	[1]	SPACER (45.86X50.98X32.01-MM THK)
	9R-2450 B	[1]	SPACER (45.86X50.98X32.061-MM THK)
	9R-2451 B	[1]	SPACER (45.86X50.98X32.112-MM THK)
	9R-2452 B	[1]	SPACER (45.86X50.98X32.162-MM THK)
	9R-2453 B	[1]	SPACER (45.86X50.98X32.213-MM THK)
	9R-2454 B	[1]	SPACER (45.86X50.98X32.264-MM THK)
	9R-2455 B	[1]	SPACER (45.86X50.98X32.315-MM THK)
	9R-2456 B	[1]	SPACER (45.86X50.98X32.366-MM THK)
	9R-2457 B	[1]	SPACER (45.86X50.98X32.416-MM THK)
	9R-2458 B	[1]	SPACER (45.86X50.98X32.467-MM THK)
	9R-2459 B	[1]	SPACER (45.86X50.98X32.518-MM THK)
	9R-2460 B	[1]	SPACER (45.86X50.98X32.569-MM THK)
73.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
74.	0T-0318	[2]	BOLT (7/16-14X1-IN)
75.	9R-2502	[1]	NUT (1-1/4-18-THD)
76.	9R-2503	[1]	BLOCK
77.	2M-2570	[12]	LOCKNUT (1/2-20-THD)
78.	9R-6602	[2]	PLUG-MAGNETIC
79.	9R-2508	[1]	HOUSING
80.	3B-5302	[1]	PIN-COTTER
81.	9R-2494	[1]	RING
82.	7T-7621	[1]	BEARING AS
83.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
84.	9R-2512	[1]	SEAL
85.	9R-2407	[1]	RETAINER AS
86.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
87.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
88.	3B-4509	[6]	LOCKWASHER
89.	3K-3379	[6]	BOLT (9/16-12X1-IN)
90.	7T-6653	[1]	CONE-BEARING (TAPERED ROLLER)
91.	9R-2496	[1]	SEAL
92.	9R-2499	[1]	SEAL AS
93.	9R-2498	[1]	RETAINER
94.	113-1147	[1]	FLANGE
95.	9R-2497	[1]	SEAL
96.	9R-2501	[1]	WASHER (32.5X60.5X5.6-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

156-2853: AXLE GP-REAR

AXLE GP-REAR

156-2853 AXLE GP-REAR
S/N 2AR1-1603
18.5/1 RATIO
PART OF 107-3716 AXLE & MTG GP-REAR
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-5837	[2]	SHAFT AS
			(EACH INCLUDES)
1A.	9R-5219	[8]	BOLT-SPECIAL
			-OR-
	241-7850 AFJ	[8]	STUD-WHEEL
2.	9R-2407	[1]	RETAINER AS
2A.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
2B.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
3.	156-1928	[1]	HOUSING AS (LH)
3A.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
3B.	8S-9151	[1]	CUP-BEARING
3C.		[2]	STUD
3D.	156-1930	[1]	GEAR-RING (56-TEETH)
4.		[1]	HOUSING AS
4A.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
4B.	8S-9151	[1]	CUP-BEARING
4C.		[2]	STUD
4D.	156-1930	[1]	GEAR-RING (56-TEETH)
5.	186-4117	[2]	CARRIER AS
			(EACH INCLUDES)
5A.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
5B.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
5C.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
5D.	9R-2419	[3]	KIT-BEARING
			(INCLUDES NEEDLES)
5E.	9R-2420	[1]	RETAINER
5F.	9R-2421	[3]	SHAFT
5G.	186-4118	[3]	GEAR-PLANETARY (20-TEETH)
6.	9F-2167	[2]	SCREW-PURGE (3/8-24X1.164-IN)
7.	9R-0883	[1]	PIN
8.	9R-0823	[1]	LEVER AS
9.	9R-2427 B	[1]	SHIM (0.965-MM THK)
	9R-2428 B	[1]	SHIM (1.118-MM THK)
	9R-2429 B	[1]	SHIM (1.27-MM THK)
	9R-2430 B	[1]	SHIM (1.422-MM THK)
	9R-2431 B	[1]	SHIM (1.575-MM THK)
	9R-2432 B	[1]	SHIM (1.727-MM THK)
	9R-2433 B	[1]	SHIM (1.88-MM THK)
	9R-2434 B	[1]	SHIM (2.032-MM THK)
10.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
11.	156-2572	[1]	HOUSING-REAR BRAKE (RH)
12.	9R-9410	[2]	SEAL-REAR BRAKE
13.	9R-9409	[2]	SEAL-REAR BRAKE
14.	9R-9408	[2]	PISTON-REAR BRAKE
15.	9R-2446 B	[1]	SPACER (45.86X50.98X31.858-MM THK)
	9R-2447 B	[1]	SPACER (45.86X50.98X31.908-MM THK)
	9R-2448 B	[1]	SPACER (45.86X50.98X31.959-MM THK)
	9R-2449 B	[1]	SPACER (45.86X50.98X32.01-MM THK)
	9R-2450 B	[1]	SPACER (45.86X50.98X32.061-MM THK)
	9R-2451 B	[1]	SPACER (45.86X50.98X32.112-MM THK)
	9R-2452 B	[1]	SPACER (45.86X50.98X32.162-MM THK)
	9R-2453 B	[1]	SPACER (45.86X50.98X32.213-MM THK)
	9R-2454 B	[1]	SPACER (45.86X50.98X32.264-MM THK)
	9R-2455 B	[1]	SPACER (45.86X50.98X32.315-MM THK)
	9R-2456 B	[1]	SPACER (45.86X50.98X32.366-MM THK)
	9R-2457 B	[1]	SPACER (45.86X50.98X32.416-MM THK)
	9R-2458 B	[1]	SPACER (45.86X50.98X32.467-MM THK)
	9R-2459 B	[1]	SPACER (45.86X50.98X32.518-MM THK)
	9R-2460 B	[1]	SPACER (45.86X50.98X32.569-MM THK)
16.	230-4017	[8]	DISC-BRAKE
17.	9R-2474	[2]	PIN
18.	9R-9401	[8]	PLATE
19.	8S-4740	[12]	BOLT (9/16-12X5-IN)
20.	9R-9398	[2]	MANIFOLD-BRAKE TUBE
21.	8H-1607	[2]	SEAL-O-RING
22.	9R-2424	[2]	GEAR (16-TEETH)
23.	8M-8157	[4]	SEAL-O-RING
24.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
25.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)
26.	9X-8880	[25]	BOLT (5/8-11X2-IN)
27.	9R-2508	[1]	HOUSING
28.	113-1147	[1]	FLANGE
29.	9R-2497	[1]	SEAL
30.	9R-2501	[1]	WASHER (32.5X60.5X5.6-MM THK)
31.	9R-2502	[1]	NUT (1-1/4-18-THD)
32.	3B-5302	[1]	PIN-COTTER
33.	9R-2498	[1]	RETAINER
34.	3B-4509	[6]	LOCKWASHER
35.	3K-3379	[6]	BOLT (9/16-12X1-IN)
36.	9X-8883	[1]	BOLT (5/8-11X2.75-IN)
37.	5L-9018	[4]	BOLT-SOCKET HEAD (1/4-20X1.75-IN)
38.	8T-6760	[2]	PLUG-PIPE (1-1/2-11-1/2 NPT)
39.	9R-2499	[1]	SEAL AS
40.	9R-2496	[1]	SEAL
41.	7T-6653	[1]	CONE-BEARING (TAPERED ROLLER)
42.	118-5839	[2]	SEAL-REAR AXLE
43.	9R-2512	[1]	SEAL
44.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
45.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
46.	9R-2505	[1]	SEAL
47.	9R-2504	[1]	SHAFT
48.	9R-2507 M	[1]	SCREW-SPECIAL
49.	7T-7621	[1]	BEARING AS
50.	9R-2494	[1]	RING
51.	9R-2480 N	[1]	CASE AS
52.	2S-0480	[1]	CUP-TAPERED ROLLER
53.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
54.	9R-2506	[1]	FORK
55.	9R-2492	[1]	WASHER (64.389X78.74X3.124-MM THK)
56.	9R-2493	[1]	RING
57.	9R-2488	[1]	GEAR (16-TEETH)
58.	9R-2482	[1]	COUPLING
59.	278-0223	[1]	HOUSING-BRAKE (WITHOUT DIFFERENTIAL LOCK)
60.	9R-2486	[1]	SPRING
61.	9R-2483	[1]	ADAPTER
62.	9R-2484	[2]	BUSHING-TERMINAL
63.	9R-2490	[2]	WASHER (76.2X101.6X1.524-MM THK)
64.	9R-2491	[1]	SPIDER
65.	9R-9403	[4]	PINION
66.	9R-2489	[4]	WASHER-SPRING
67.	9R-2485	[8]	BOLT (1/2-13X2.87-IN)
68.	9R-2495	[2]	SEAL
69.	9R-5241 H	[1]	GEAR SET (REAR AXLE)
70.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
71.	2M-2570	[12]	LOCKNUT (1/2-20-THD)
72.	9R-2503	[1]	BLOCK
73.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
74.	0T-0318	[2]	BOLT (7/16-14X1-IN)
75.	9R-2487	[1]	GEAR (16-TEETH)
76.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
77.	9R-6602	[2]	PLUG-MAGNETIC (REAR AXLE)
78.	5P-0540	[4]	NUT-HEX FULL (9/16-18-THD)
79.	278-0224	[1]	HOUSING-BRAKE (WITH DIFFERENTIAL LOCK)
80.	156-1933	[1]	HOUSING-REAR BRAKE (LH)
81.	9R-2426	[2]	LOCK
82.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	H		INCLUDES PART(S) MARKED H ON GRAPHIC
	J		USED IN SNOW CHAIN APPLICATIONS TO PROVIDE ADDITIONAL CLEARANCE FOR CHAINS
	M		METRIC PART
	N		INCLUDES PART(S) MARKED N ON GRAPHIC

150-1281: CHART-WHEEL & TIRE

CHART-WHEEL & TIRE

150-1281 CHART-WHEEL & TIRE -FRONT
S/N 1PR1-1598; 2AR1-1603
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
			(FOR USAGE REFER TO CHART)
1.	9R-0315	[1]	WHEEL AS (FRONT)
2.	9R-1572	[1]	WHEEL AS
3.	9R-2937	[1]	WHEEL AS
4.	135-0770	[1]	WHEEL AS (FRONT)
5.	135-0786	[1]	WHEEL AS (FRONT)
6.	141-7221		NUT-HEX FLANGE (3/4-16-THD)
7.	6D-0337	[1]	VALVE GP-TIRE
	6D-0443	[1]	HOUSING AS-CORE
	2D-2628	[1]	CORE-VALVE
	2D-2633	[1]	CAP
	8D-2707	[2]	SPUD AS
	2D-2629	[1]	GROMMET
	2D-2630	[1]	WASHER
	2D-2631	[1]	NUT (0.482-26-THD)
			CONTACT LOCAL CATERPILLAR DEALERSHIP FOR TIRE REPLACEMENT

150-4377: CHART-WHEEL & TIRE

CHART-WHEEL & TIRE

150-4377 CHART-WHEEL & TIRE -REAR
S/N 1PR1-1598; 2AR1-1603
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
			(FOR USAGE REFER TO CHART)
1.	102-8670	[1]	WHEEL AS (REAR)
2.	102-8682	[1]	WHEEL AS
3.	112-4410	[1]	WHEEL AS (REAR)
4.	112-4411	[1]	WHEEL AS (REAR)
5.	112-4412	[1]	WHEEL AS (REAR)
6.	114-5632	[1]	WHEEL AS
7.	119-7776	[1]	WHEEL AS (REAR)
8.	119-7785	[1]	WHEEL AS (REAR)
9.	119-7789	[1]	WHEEL AS (REAR)
10.	141-7221		NUT-HEX FLANGE (3/4-16-THD)
11.	6D-0337	[1]	VALVE GP-TIRE
	6D-0443	[1]	HOUSING AS-CORE
	2D-2628	[1]	CORE-VALVE
	2D-2633	[1]	CAP
	8D-2707	[2]	SPUD AS
	2D-2629	[1]	GROMMET
	2D-2630	[1]	WASHER
	2D-2631	[1]	NUT (0.482-26-THD)
			CONTACT LOCAL CATERPILLAR DEALER FOR PROPER TIRE REPLACEMENT

153-0986: CONTROL AR-POWER SHIFT XMSN

CONTROL AR-POWER SHIFT XMSN

153-0986 CONTROL AR-POWER SHIFT XMSN
S/N 2AR604-1603
POWER SHIFT-2 WHEEL DRIVE, NACD
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
139-3559 Y	[1]	BOX GP-BATTERY
138-7381 Y	[1]	FILLER GP-POWER TRAIN OIL
142-0459 Y	[1]	FILM GP
142-0458 Y	[1]	FLOOR MAT GP
143-0789 Y	[1]	LINES GP-POWER TRAIN COOLER (POWER SHIFT)
143-0788 Y	[1]	MOUNTING GP-ENGINE & XMSN (POWER SHIFT)
142-4436 Y	[1]	TRANSMISSION AR-POWER SHIFT
141-9887 Y	[1]	WIRING GP-POWER SHIFT
147-2732 Y	[1]	WIRING GP-STABILIZER ALARM (SIDESHIFT)
Y		SEPARATE ILLUSTRATION

153-0987: CONTROL AR-POWER SHIFT XMSN

CONTROL AR-POWER SHIFT XMSN

153-0987 CONTROL AR-POWER SHIFT XMSN
S/N 1PR598-1598; 2AR604-1603
POWER SHIFT-ALL WHEEL DRIVE
AN ATTACHMENT

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
139-3559 Y	[1]	BOX GP-BATTERY
138-7381 Y	[1]	FILLER GP-POWER TRAIN OIL
142-0459 Y	[1]	FILM GP
142-0458 Y	[1]	FLOOR MAT GP
143-0789 Y	[1]	LINES GP-POWER TRAIN COOLER (POWER SHIFT)
143-0788 Y	[1]	MOUNTING GP-ENGINE & XMSN (POWER SHIFT)
138-4559 Y	[1]	SHAFT GP-DRIVE (FRONT)
142-4437 Y	[1]	TRANSMISSION AR-POWER SHIFT
141-9887 Y	[1]	WIRING GP-POWER SHIFT
147-2732 CY	[1]	WIRING GP-STABILIZER ALARM (SIDESHIFT)
C		CHANGE FROM PREVIOUS TYPE
Y		SEPARATE ILLUSTRATION

8Y-7481: CONTROL GP-DIFFERENTIAL LOCK

CONTROL GP-DIFFERENTIAL LOCK

8Y-7481 CONTROL GP-DIFFERENTIAL LOCK
S/N 2AR1-1603
PART OF 143-2915, 8Y-7476 POWER TRAIN AR

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-5567	[1]	PLATE AS
2.	8T-4244 M	[1]	NUT (M12X1.75-THD)
3.	5P-0372	[2]	LOCK PIN
4.	8B-1419	[1]	PIN-CLEVIS
5.	191-9113	[1]	ROD AS
6.	103-4867	[1]	SPRING
7.	8T-4815	[2]	ROD END
8.	8T-4133 M	[1]	NUT (M10X1.5-THD)
9.	9R-3051	[1]	ROD
10.	9R-2806	[1]	PIN
11.	9R-2807	[1]	CLIP (RETAINER)
12.	9R-1581	[1]	BOOT
13.	8C-4987	[1]	PIN-CLEVIS
	M		METRIC PART

Information:

POWER TRAIN

AXLE GP

Operation and Maintenance Manual

Axle Universal Joint (Front) - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil (Front) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil (Rear) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil Level (Front) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Differential Oil Level (Rear) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil (Front) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil (Rear) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil Level (Front) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Final Drive Oil Level (Rear) - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Axle Universal Joint (Rear) - Lubricate - All Wheel Steer Machines Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Kingpin Bearings (Front) - Lubricate - Two-Wheel Drive Only
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Kingpin Bearings (Rear) - Lubricate - All Wheel Steer
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Service Letter-NACD

Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS
SCHEDULED OIL SAMPLING (SOS) RESULTS ON BACKHOE LOADERS

Specifications

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Service Letter-China

Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders

Service Letter-Asia

Systems Operation

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Rear)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Reuse And Salvage Guidelines

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Service Letter-APD

Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders
Product Support Program For Installing A New Crown Wheel And Pinion Gearset To Eliminate Rear Axle Noise On Certain 416C, 426C, 436C, 428C And 438C Backhoe Loaders

Testing and Adjusting

Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Rear) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Drive and Steering Axle (Front) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes

Disassembly and Assembly

Axle Group (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Pinion Assembly (Rear)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Final Drive Planetary Carrier Hub
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Axle Housing (Front) (All Wheel Drive)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Final Drive And Axle Housing (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Brakes (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Rear) (All Wheel Steer)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Differential (Front)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Tie Rod
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Drive Pinion
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Axle Housing (Front) (All Wheel Drive)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Service Magazine

Serviceable Parts for 4 Wheel Drive Front Axle Steering Cylinder{4303}
1997/08/11

Additional Serviceable Parts Available For Front Axle {3020}
1999/05/10

Correct Identification of the Bearing Cones for the 154-5471 Drive and Steering Axle for C-Series Machines {3020, 3278}
2000/02/14

Service Parts for the Front AWD Axle Are Now Available {3020, 3260, 3278, 4303}
2000/02/14

New Maintenance Interval for Checking the Oil Level of the Axle Oscillation Bearing {3020, 3250, 7551}
2000/02/21

Brake Oil Additive Reduces Noise in the Axle {3020, 3250}
2000/11/06

Correction to the Disassembly and Assembly, SENR1206 for the Differential {3258}
2000/12/25

Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
2001/06/11

A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
2005/01/24

Oil Change Interval for the Rear Axle {3260}
2002/05/20

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

Correction to Axle Housing (Front) (All Wheel Drive) {3260}
2005/05/16

Empty Compartment Brake Purging Procedure {3278, 3282, 4269, 4291}
2006/03/27

New Brake Housings for the Rear Axle Are Available {3278, 3282}
2008/06/23

A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors {3282}

Caterpillar Parts SIS Catalog 436C :

Truck sale:

CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States

Call

1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico

USD $23,800

2000 CAT 436C

Iron2sell.com

Call

1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey

USD $29,000

1999 CAT 436C

Equipment Pros
Baltimore, Maryland