AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

106-6250 LINES GP-SWING S/N 1PR1-1598; 2AR1-1603 PART OF 120-9578, 143-1801 HYDRAULIC AR 436C BACKHOE LOADER


HYDRAULIC SYSTEM
LINES GP-SWING
LINES GP-CYLINDER
MOUNTING GP
PUMP GP

BACKHOE LOADER 436C BACKHOE LOADER 1PR
 436C Backhoe Loader Center Pivot, Parallel Lift 1PR00001-01598 (MACHINE) POWERED BY 3054 Engine SEBP2601 436C 1PR   (1996)

HYDRAULIC SYSTEM

LINES GP-SWING
LINES GP-SWING
106-6250 LINES GP-SWING
 

#SEBP26010440
 

106-6250: LINES GP-SWING

106-6250 LINES GP-SWING
S/N 1PR1-1598; 2AR1-1603
PART OF 120-9578, 143-1801 HYDRAULIC AR
i00200835 SEBP2601
1066250 LINES GP-SWING Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
2. 6V-1249 [2] GROMMET (22-MM ID)  
3. 6V-8398 [8] SEAL-O-RING  
4. 6V-8625 [2] ELBOW  
5. 3K-0360 [8] SEAL-O-RING  
6. 113-7871 I [1] HOSE AS  
7. 9R-9005 I [2] HOSE AS  
8. 6V-8639 [6] CONNECTOR  
9. 9R-2053 [2] BLOCK  
10. 5P-0599 [2] CLAMP-BAND  
11. 5P-7464 [2] CLIP (SLOT)  
12. 5P-7465 [2] CLIP (TAB)  
13. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
14. 113-7872 I [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26010441
 

112-1853: LINES GP-TILT CYLINDER

112-1853 LINES GP-TILT CYLINDER
S/N 1PR1-1598; 2AR1-1603
PART OF 119-8177, 119-8180, 139-9153, 143-3946, 143-3948, 143-3950, 143-3952 HYDRAULIC AR
AN ATTACHMENT
i00202112 SEBP2601
1121853 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6726 [4] CLAMP-HOSE  
2. 112-5830 [1] TUBE AS  
3. 112-5833 [1] TUBE AS  
4. 112-5835 [1] TUBE AS  
5. 112-5837 [1] TUBE AS  
6. 112-6792 [1] PLATE AS  
7. 112-6923 [1] PLATE AS  
8. 118-4637 I [2] HOSE AS  
9. 122-4870 [1] BRACKET AS  
10. 122-4871 [1] BRACKET AS  
11. 123-3436 [2] VALVE GP-LOAD CONTROL  
12. 123-4483 [1] TUBE AS  
13. 123-4484 [1] TUBE AS  
14. 123-4485 [1] TUBE AS  
15. 123-4488 I [1] HOSE AS  
16. 123-4489 I [1] HOSE AS  
17. 123-4492 [2] BRACKET AS  
18. 123-4515 [1] TUBE AS  
19. 123-4516 [1] TUBE AS  
20. 128-7954 [2] BLOCK  
21. 3D-2824 [8] SEAL-O-RING  
22. 3K-0360 [4] SEAL-O-RING  
23. 6V-8398 [11] SEAL-O-RING  
24. 6V-8632 [2] CONNECTOR  
25. 6V-8713 [4] CONNECTOR  
26. 6V-8775 [2] TEE-FACE SEAL  
27. 6V-9838 [2] TEE-SWIVEL  
28. 7J-9108 [11] SEAL-O-RING  
29. 8T-0404 [1] ELBOW  
30. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [2] NUT (M10X1.5-THD)  
32. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
33. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
34. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
35. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
36. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
37. 8T-5429 [3] ELBOW  
38. 9R-1004 [4] CLIP (TAB)  
39. 9R-1005 [8] CLIP (SLOT)  
40. 9R-7802 [4] CLIP (SLOT)  
41. 9R-7803 [4] CLIP (TAB)  
42. 6U-0455 [2] STRAP  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26010442
 

112-6401: LINES GP-TILT CYLINDER

112-6401 LINES GP-TILT CYLINDER
S/N 1PR1-1598; 2AR1-1603
PART OF 119-8176, 119-8178, 119-8179, 139-9152, 143-3945, 143-3947, 143-3949, 143-3951 HYDRAULIC AR
AN ATTACHMENT
i00201101 SEBP2601
1126401 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 8T-6726 [4] CLAMP-HOSE  
3. 9R-5948 [4] BLOCK  
4. 112-5830 [1] TUBE AS  
5. 112-5833 [1] TUBE AS  
6. 112-5835 [1] TUBE AS  
7. 112-5837 [1] TUBE AS  
8. 112-6792 [1] PLATE AS  
9. 112-6923 [1] PLATE AS  
10. 118-4637 I [2] HOSE AS  
11. 118-4638 I [2] HOSE AS  
12. 122-4870 [1] BRACKET AS  
13. 122-4871 [1] BRACKET AS  
14. 151-4841 [2] BLOCK  
15. 158-3412 [8] CLIP (SLOT)  
16. 148-8341 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8713 [1] CONNECTOR  
  3D-2824 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
17. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
18. 148-8446 [2] TEE AS-SWIVEL  
    (EACH INCLUDES)
  6V-9838 [1] TEE-SWIVEL  
  7J-9108 [2] SEAL-O-RING  
19. 6V-8398 [4] SEAL-O-RING  
20. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 9R-7803 [4] CLIP (TAB)  
25. 195-4974 [2] VALVE AS-CHECK  
    (EACH INCLUDES)
  196-8813 [1] VALVE AS-CHECK  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26010443
 

135-3495: LINES GP-TILT CYLINDER

135-3495 LINES GP-TILT CYLINDER
S/N 1PR1-1598; 2AR1-1603
FIELD INSTALLED
PART OF 135-3501 CONTROL AR-LIFT & TILT LOAD
i00202181 SEBP2601
1353495 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6726 [4] CLAMP-HOSE  
2. 123-3436 [2] VALVE GP-LOAD CONTROL  
3. 123-4483 [1] TUBE AS  
4. 123-4484 [1] TUBE AS  
5. 123-4485 [1] TUBE AS  
6. 123-4488 I [1] HOSE AS  
7. 123-4489 I [1] HOSE AS  
8. 123-4492 [2] BRACKET AS  
9. 123-4515 [1] TUBE AS  
10. 123-4516 [1] TUBE AS  
11. 3D-2824 [6] SEAL-O-RING  
12. 3K-0360 [4] SEAL-O-RING  
13. 6V-8398 [10] SEAL-O-RING  
14. 6V-8632 [2] CONNECTOR  
15. 6V-8713 [2] CONNECTOR  
16. 6V-8775 [2] TEE-FACE SEAL  
17. 7J-9108 [5] SEAL-O-RING  
18. 8T-0404 [1] ELBOW  
19. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-5429 [3] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26010444
 

122-9136: MOUNTING GP-BANK VALVE

122-9136 MOUNTING GP-BANK VALVE
S/N 1PR1-1598; 2AR1-1603
PART OF 120-9578, 143-1801 HYDRAULIC AR
i00200979 SEBP2601
1229136 MOUNTING GP-BANK VALVE Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-2863 [1] BRACKET AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
  9R-2672 M [8] BOSS-THREADED (M10X1.5X120-MM)  
2. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4183 M [5] BOLT (M12X1.75X40-MM)  
4. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
  M   METRIC PART
 

#SEBP26010445
 

9R-4668: MOUNTING GP-CYLINDER

9R-4668 MOUNTING GP-CYLINDER -MULTIPURPOSE BUCKET
S/N 1PR1-1598; 2AR1-1603
PART OF 124-0486, 124-0487, 124-0488, 124-0489, 124-0491, 185-6705, 185-6706 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
i00789264 SEBP2601
9R4668 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-4677 [2] PIN  
2. 3B-5317 [4] PIN-COTTER  
3. 9R-4678 [2] PIN  
4. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
 

#SEBP26010446
 

112-6564: PUMP GP-PISTON

112-6564 PUMP GP-PISTON
S/N 1PR1-597; 2AR1-603
PART OF 120-9578 HYDRAULIC AR
i00200873 SEBP2601
1126564 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3343 [1] RING  
2. 6E-4004 [2] SEAL-SHAFT  
3. 135-6614 [1] HOUSING-PUMP  
4. 3E-6770 [1] SEAL-O-RING  
5. 120-5730 [1] PLUNGER  
6. 3B-5790 [1] CUP-BEARING  
7. 6V-2323 [1] CONE-BEARING  
8. 6E-6176 [1] SPRING  
9. 120-5732 [1] GUIDE-PLUNGER  
10. 3E-6769 [4] SEAL-O-RING  
11. 120-5722 [1] HEAD-PUMP  
12. 095-9805 M [4] BOLT-SOCKET HEAD (M14X2X40-MM)  
13. 083-4419 [1] PIN  
14. 6E-2943 [1] PLUG  
15. 1P-6872 [1] CUP-BEARING  
16. 8C-7110 [1] CONE-BEARING  
17. 6E-4000 [1] SPACER (25.5X35X3-MM THK)  
18. 120-5729 [1] GUIDE-PISTON  
19. 120-5727 [1] PISTON-CONTROL  
20. Z [2] STOP AS  
21. 121-3042 [1] SWASHPLATE AS  
22. 6E-4003 [2] BEARING  
23. 120-5723 [1] PLUG-BREAK OFF  
24. 105-2143 [1] SHAFT-PUMP  
25. 9S-8006 [1] PLUG (7/8-14-THD)  
26. 2M-9780 [1] SEAL-O-RING  
27. 9T-3940 [1] PLUG-BREAK OFF  
28. 8T-8442 M [4] BOLT-SOCKET HEAD (M6X1X30-MM)  
29. 120-5733 [1] SPRING  
30. 103-5522 [1] ADAPTER AS  
31. 030-7946 [2] ELBOW  
32. 107-3116 [1] SEAL-O-RING  
33. 3J-7354 [3] SEAL-O-RING  
34. 135-6615 [1] TUBE AS  
35. 120-5734 [1] VALVE GP-PUMP CONTROL (POWER COMPENSATOR)  
36. 135-6616 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
  120-5726 FY [1] ROTATING GP-PUMP  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP26010447
 

155-5109: PUMP GP-PISTON

155-5109 PUMP GP-PISTON
S/N 1PR598-1598; 2AR604-1603
FIELD REPLACEMENT ORDER 161-6634 PUMP GP AND 160-5541 PLATE AS, AND EITHER 1604884 TUBE AS WHEN USING STANDARD SOUND AR. OR 1629636 WHEN USING ATTACHMENT SOUND AR.
PART OF 147-6212, 147-6215, 153-6355 ENGINE AR
AN ATTACHMENT
i00739970 SEBP2601
1555109 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3343 [1] RING  
2. 6E-4003 [2] BEARING  
3. 135-6614 [1] HOUSING-PUMP  
4. 120-5726 Y [1] ROTATING GP-PUMP  
5. 3E-6769 [4] SEAL-O-RING  
6. 095-9805 M [4] BOLT-SOCKET HEAD (M14X2X40-MM)  
7. 1P-6872 [1] CUP-BEARING  
8. 8C-7110 [1] CONE-BEARING  
9. 105-2146 [2] PLUG  
10. 6E-4000 B [1] SPACER (25.5X35X3-MM THK)(3MM THK)  
11. 3E-6770 [1] SEAL-O-RING  
12. 120-5732 [1] GUIDE-PLUNGER  
13. 6E-6176 [1] SPRING  
14. 120-5730 [1] PLUNGER  
15. 9S-8006 [1] PLUG (7/8-14-THD)  
16. 2M-9780 [1] SEAL-O-RING  
17. 162-1604 [1] SHAFT-DRIVE  
18. 6V-2323 [1] CONE-BEARING  
19. 3B-5790 [1] CUP-BEARING  
20. 6E-4004 [2] SEAL-SHAFT  
21. 121-3042 [1] SWASHPLATE AS  
22. 120-5727 [1] PISTON-CONTROL  
23. 120-5729 [1] GUIDE-PISTON  
24. 136-8423 [1] PLUG-BREAK OFF  
25. 083-4419 [1] PIN  
26. 120-5723 [1] PLUG-BREAK OFF  
27. 120-5722 [1] HEAD-PUMP  
28. 103-5522 [1] ADAPTER AS  
  3J-7354 [1] SEAL-O-RING  
29. 030-7946 [2] ELBOW  
30. 3J-7354 [4] SEAL-O-RING  
31. 135-6615 [1] TUBE AS  
32. 162-1605 [1] VALVE GP-PUMP CONTROL (POWER COMPENSATOR)  
33. 8T-8442 M [7] BOLT-SOCKET HEAD (M6X1X30-MM)  
34. 107-3116 [1] SEAL-O-RING  
35. 155-5112 [1] SPRING  
36. 155-5113 [1] ACTUATOR GP-PUMP  
37. 135-6616 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
38. 9X-7680 [3] SEAL-O-RING  
39. 9S-8002 [1] PLUG (7/16-20-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26010448
 

120-5726: ROTATING GP-PUMP

120-5726 ROTATING GP-PUMP
S/N 1PR1-1598; 2AR1-1603
PART OF 112-6564, 155-5109 PUMP GP-PISTON
FIELD REPLACEMENT ORDER @@@@@ 6E-4006@@@@@
ALSO AN ATTACHMENT
i00200924 SEBP2601
1205726 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-5767 [9] PISTON AS  
2. 6E-6154 [1] PLATE-RETRACTION  
3. 6E-6155 [1] BEARING  
4. 196-0226 [1] BARREL  
5. 6E-3341 [1] SEAT-SPRING  
6. 6E-4009 [1] SPRING  
7. 6E-6158 [1] RING  
8. 120-5724 [1] PLATE-VALVE  
9. 168-3379 [3] PIN  
 

#SEBP26010449
 

6E-4006: ROTATING GP-PUMP

6E-4006 ROTATING GP-PUMP
S/N 1PR1-1598; 2AR1-1603
FIELD REPLACEMENT FOR @@@@@120-5726@@@@@
i02888364 SEBP2601
6E4006 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 235-5767 [9] PISTON AS  
2. 6E-6154 [1] PLATE-RETRACTION  
3. 6E-6155 [1] BEARING  
4. 196-0226 [1] BARREL  
5. 6E-3341 [1] SEAT-SPRING  
6. 6E-4009 [1] SPRING  
7. 6E-6158 [1] RING  
8. 120-5724 [1] PLATE-VALVE  
9. 168-3379 [3] PIN  
 

Information:

Special Instruction
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25
Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25

Caterpillar Parts SIS Catalog 436C :

LINES GP-STICK
9R-8785 LINES GP-STICK
LINES GP-STICK
9R-8336 LINES GP-STICK
139-1923 LINES GP-STABILIZER
LINES GP-STABILIZER
106-6249 LINES GP-STABILIZER
LINES GP-STABILIZER
106-6249 LINES GP-STABILIZER
LINES GP-RETURN
121-9806 LINES GP-RETURN
LINES GP-RETURN
121-9805 LINES GP-RETURN
LINES GP-RETURN
121-9805 LINES GP-RETURN
LINES GP-TILT CYLINDER
112-1853 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
112-6401 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
135-3495 LINES GP-TILT CYLINDER
MOUNTING GP-BANK VALVE
122-9136 MOUNTING GP-BANK VALVE
MOUNTING GP-CYLINDER
9R-4668 MOUNTING GP-CYLINDER
PUMP GP-PISTON
112-6564 PUMP GP-PISTON
PUMP GP-PISTON
155-5109 PUMP GP-PISTON
ROTATING GP-PUMP
120-5726 ROTATING GP-PUMP

Truck sale:

CATERPILLAR 436C 2000
 
CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States
1999 CAT 436C
Call 
1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico
2000 CAT 436C
USD $23,800 
2000 CAT 436C

Iron2sell.com
1992 CAT 436C
Call 
1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey
1999 CAT 436C
USD $29,000 
1999 CAT 436C

Equipment Pros
Baltimore, Maryland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.